Kinetics of the dimerization of retroviral proteases: the "fireman's grip" and dimerization

Kinetics of Bovine leukemia virus aspartic protease reveals its dimerization and conformational change

The retropepsin (PR) of the Bovine leukemia virus (BLV) plays, as in other retroviruses, a crucial role in the transition from the non-infective viral particle to the infective virion by processing the polyprotein Gag. PR is expressed as an immature precursor associated with Gag, after an occasional −1 ribosomal frameshifting event. Self-hydrolysis of PR at specific N- and C-terminal sites releases the monomer that dimerizes giving rise to the active protease. We designed a strategy to express BLV PR in E. coli as a fusion protein with maltose binding protein, with a six-histidine tag at its N-terminal end, and bearing a tobacco etch virus protease hydrolysis site. This allowed us to obtain soluble and mature recombinant PR in relatively good yields, with exactly the same amino acid composition as the native protein. As PR presents relative promiscuity for the hydrolysis sites we designed four fluorogenic peptide substrates based on Förster resonance energy transfer (FRET) in order to characterize the activity of the recombinant enzyme. These substrates opened the way to perform kinetic studies, allowing us to characterize the dimer-monomer equilibrium. Furthermore, we obtained kinetic evidence for the existence of a conformational change that enables the interaction with the substrate. These results constitute a starting point for the elucidation of the kinetic properties of BLV-PR, and may be relevant not only to improve the chemical warfare against this virus but also to better understand other viral PRs.

Precursors of Viral Proteases as Distinct Drug Targets

Viral proteases are indispensable for successful virion maturation, thus making them a prominent drug target. Their enzyme activity is tightly spatiotemporally regulated by expression in the precursor form with little or no activity, followed by activation via autoprocessing. These cleavage events are frequently triggered upon transportation to a specific compartment inside the host cell. Typically, precursor oligomerization or the presence of a co-factor is needed for activation. A detailed understanding of these mechanisms will allow ligands with non-canonical mechanisms of action to be designed, which would specifically modulate the initial irreversible steps of viral protease autoactivation. Binding sites exclusive to the precursor, including binding sites beyond the protease domain, can be exploited. Both inhibition and up-regulation of the proteolytic activity of viral proteases can be detrimental for the virus. All these possibilities are discussed using examples of medically relevant viruses including herpesviruses, adenoviruses, retroviruses, picornaviruses, caliciviruses, togaviruses, flaviviruses, and coronaviruses.

Improving the alkaline stability of pepsin through rational protein design using renin, an alkaline-stable aspartic protease, as a structural and functional reference

The present study sought to identify the structural determinants of aspartic protease structural stability and activity at elevated pH. Various hypotheses have been published regarding the features responsible for the unusual alkaline structural stability of renin, however, few structure-function studies have verified these claims. Using pepsin as a model system, and renin as a template for functional and structural alkaline stability, a rational re-design of pepsin was undertaken to identify residues contributing to the alkaline instability of pepsin-like aspartic proteases in regards to both structure and function. We constructed 13 mutants based on this strategy. Among them, mutants D159 L and D60A led to an increase in activity at elevated pH levels (p ≤ 0.05) and E4V and H53F were shown to retain native-like structure at elevated pH (p ≤ 0.05). Previously suggested carboxyl groups Asp¹¹, Asp¹¹⁸, and Glu¹³ were individually shown not to be responsible for the structural instability or lack of activity at neutral pH in pepsin. The importance of the β-barrel to structural stability was highlighted as the majority of the stabilizing residues identified, and 39% of the weakly conserved residues in the N-terminal lobe, were located in β-sheet strands of the barrel. The results of the present study indicate that alkaline stabilization of pepsin will require reduction of electrostatic repulsions and an improved understanding of the role of the hydrogen bonding network of the characteristic β-barrel.

Chemically functionalized conical PET nanopore for protein detection at the single-molecule level

Proteins are essential for all living organisms, and perform a wide variety of functions in the cell and human body, including structural, mechanical, biochemical, and signaling. Since proteins can serve as valuable biomarkers for health status and diseases states, and enable personalized medicine, sensitive and rapid detection of proteins is of paramount importance. Herein, we report a chemically functionalized conical shaped poly-(ethylene terephthalate) nanopore (PET nanopore) as a stochastic sensing element for detection of proteins at the single-molecule level. We demonstrate that the PET nanopore sensor is not only sensitive and selective, but also can differentiate proteins rapidly, offering the potential for label-free protein detection and characterization. Our developed PET nanopore sensing strategy not only provides a general platform for exploring fundamental protein dynamics and rapid detection of proteins at the single-molecule level, but also opens new avenues toward advanced deeper understanding of enzymes, development of more efficient biosensing technologies, and constructing novel biomimetic nanopore systems.

Dimer Interface Organization is a Main Determinant of Intermonomeric Interactions and Correlates with Evolutionary Relationships of Retroviral and Retroviral-Like Ddi1 and Ddi2 Proteases

The life cycles of retroviruses rely on the limited proteolysis catalyzed by the viral protease. Numerous eukaryotic organisms also express endogenously such proteases, which originate from retrotransposons or retroviruses, including DNA damage-inducible 1 and 2 (Ddi1 and Ddi2, respectively) proteins. In this study, we performed a comparative analysis based on the structural data currently available in Protein Data Bank (PDB) and Structural summaries of PDB entries (PDBsum) databases, with a special emphasis on the regions involved in dimerization of retroviral and retroviral-like Ddi proteases. In addition to Ddi1 and Ddi2, at least one member of all seven genera of the Retroviridae family was included in this comparison. We found that the studied retroviral and non-viral proteases show differences in the mode of dimerization and density of intermonomeric contacts, and distribution of the structural characteristics is in agreement with their evolutionary relationships. Multiple sequence and structure alignments revealed that the interactions between the subunits depend mainly on the overall organization of the dimer interface. We think that better understanding of the general and specific features of proteases may support the characterization of retroviral-like proteases.

Protease-Activatable Scaffold Proteins as Versatile Molecular Hubs in Synthetic Signaling Networks

Protease signaling and scaffold-induced control of protein-protein interactions represent two important mechanisms for intracellular signaling. Here we report a generic and modular approach to control the activity of scaffolding proteins by protease activity, creating versatile molecular platforms to construct synthetic signaling networks. Using 14-3-3 proteins as a structurally well-characterized and important class of scaffold proteins, three different architectures were explored to achieve optimal protease-mediated control of scaffold activity, fusing either one or two monovalent inhibitory ExoS peptides or a single bivalent ExoS peptide to T14-3-3 using protease-cleavable linkers. Analysis of scaffolding activity before and after protease-induced cleavage revealed optimal control of 14-3-3 activity for the system that contained monovalent ExoS peptides fused to both the N-and C-terminus, each blocking a single T14-3-3 binding site. The protease-activatable 14-3-3 scaffolds were successfully applied to construct a three-step signaling cascade in which dimerization and activation of FGG-caspase-9 on an orthogonal supramolecular platform resulted in activation of a 14-3-3 scaffold, which in turn allowed 14-3-3-templated complementation of a split-luciferase. In addition, by combining 14-3-3-templated activation of caspase-9 with a caspase-9-activatable 14-3-3 scaffold, the first example of a synthetic self-activating protease signaling network was created. Protease-activatable 14-3-3 proteins thus represent a modular platform whose properties can be rationally engineered to fit different applications, both to create artificial in vitro synthetic molecular networks and as a novel signaling hub to re-engineer intracellular signaling pathways.

Graphene oxide-based biosensing platform for rapid and sensitive detection of HIV-1 protease

HIV-1 protease is essential for the life cycle of the human immunodeficiency virus (HIV), and is one of the most important clinical targets for antiretroviral therapies. In this work, we developed a graphene oxide (GO)-based fluorescence biosensing platform for the rapid, sensitive, and accurate detection of HIV-1 protease, in which fluorescent-labeled HIV-1 protease substrate peptide molecules were covalently linked to GO. In the absence of HIV-1 protease, fluorescein was effectively quenched by GO. In contrast, in the presence of HIV-1 protease, it would cleave the substrate peptide into short fragments, thus producing fluorescence. Based on this sensing strategy, HIV-1 protease could be detected at as low as 1.18 ng/mL. More importantly, the sensor could successfully detect HIV-1 protease in human serum. Such GO-based fluorescent sensors may find useful applications in many fields, including diagnosis of protease-related diseases, as well as sensitive and high-throughput screening of drug candidates. Graphical abstract ᅟ.

Plant Viral Proteases: Beyond the Role of Peptide Cutters

Almost half of known plant viral species rely on proteolytic cleavages as key co- and post-translational modifications throughout their infection cycle. Most of these viruses encode their own endopeptidases, proteases with high substrate specificity that internally cleave large polyprotein precursors for the release of functional sub-units. Processing of the polyprotein, however, is not an all-or-nothing process in which endopeptidases act as simple peptide cutters. On the contrary, spatial-temporal modulation of these polyprotein cleavage events is crucial for a successful viral infection. In this way, the processing of the polyprotein coordinates viral replication, assembly and movement, and has significant impact on pathogen fitness and virulence. In this mini-review, we give an overview of plant viral proteases emphasizing their importance during viral infections and the varied functionalities that result from their proteolytic activities.

NS2 proteases from hepatitis C virus and related hepaciviruses share composite active sites and previously unrecognized intrinsic proteolytic activities

Over the recent years, several homologues with varying degrees of genetic relatedness to hepatitis C virus (HCV) have been identified in a wide range of mammalian species. HCV infectious life cycle relies on a first critical proteolytic event of its single polyprotein, which is carried out by nonstructural protein 2 (NS2) and allows replicase assembly and genome replication. In this study, we characterized and evaluated the conservation of the proteolytic mode of action and regulatory mechanisms of NS2 across HCV and animal hepaciviruses. We first demonstrated that NS2 from equine, bat, rodent, New and Old World primate hepaciviruses also are cysteine proteases. Using tagged viral protein precursors and catalytic triad mutants, NS2 of equine NPHV and simian GBV-B, which are the most closely and distantly related viruses to HCV, respectively, were shown to function, like HCV NS2 as dimeric proteases with two composite active sites. Consistent with the reported essential role for NS3 N-terminal domain (NS3_N) as HCV NS2 protease cofactor via NS3_N key hydrophobic surface patch, we showed by gain/loss of function mutagenesis studies that some heterologous hepacivirus NS3_N may act as cofactors for HCV NS2 provided that HCV-like hydrophobic residues are conserved. Unprecedently, however, we also observed efficient intrinsic proteolytic activity of NS2 protease in the absence of NS3 moiety in the context of C-terminal tag fusions via flexible linkers both in transiently transfected cells for all hepaciviruses studied and in the context of HCV dicistronic full-length genomes. These findings suggest that NS3_N acts as a regulatory rather than essential cofactor for hepacivirus NS2 protease. Overall, unique features of NS2 including enzymatic function as dimers with two composite active sites and additional NS3-independent proteolytic activity are conserved across hepaciviruses regardless of their genetic distances, highlighting their functional significance in hepacivirus life cycle.

Despite remarkable progress in the development of therapeutic options, more than 70 million individuals are chronically infected by hepatitis C virus (HCV) worldwide and major challenges in basic and translational research remain. Phylogenetically-related HCV homologues have recently been identified in the wild in several mammalian species, whose host restriction and potential for zoonosis remain largely unknown. We comparatively characterized the functions and properties of nonstructural proteins 2 (NS2) from several animal hepaciviruses and HCV. We demonstrated that NS2 from animal hepaciviruses, like HCV NS2, are cysteine proteases, which function as dimers with two composite active sites to ensure a key proteolytic event of the single viral polyprotein at the NS2/NS3 junction. In addition to the activation of HCV NS2 protease by NS3 N-terminal domain, our data revealed a novel NS3-independent substrate specificity and efficient intrinsic proteolytic activity of NS2. The conservation of its properties and peculiar mode of action among distantly related hepaciviruses supports an important regulatory role for NS2 protein in the life cycle of these viruses. It also strengthens the value of animal, notably rodent hepaciviruses for the development of surrogate, immunocompetent models of HCV infection to address HCV-associated pathogenesis and vaccine strategies.

Inhibitors Alter the Stochasticity of Regulatory Proteins to Force Cells to Switch to the Other State in the Bistable System

The cellular behaviors under the control of genetic circuits are subject to stochastic fluctuations, or noise. The stochasticity in gene regulation, far from a nuisance, has been gradually appreciated for its unusual function in cellular activities. In this work, with Chemical Master Equation (CME), we discovered that the addition of inhibitors altered the stochasticity of regulatory proteins. For a bistable system of a mutually inhibitory network, such a change of noise led to the migration of cells in the bimodal distribution. We proposed that the consumption of regulatory protein caused by the addition of inhibitor is not the only reason for pushing cells to the specific state; the change of the intracellular stochasticity is also the main cause for the redistribution. For the level of the inhibitor capable of driving 99% of cells, if there is no consumption of regulatory protein, 88% of cells were guided to the specific state. It implied that cells were pushed, by the inhibitor, to the specific state due to the change of stochasticity.

Four Amino Acid Changes in HIV-2 Protease Confer Class-Wide Sensitivity to Protease Inhibitors

Protease is essential for retroviral replication, and protease inhibitors (PI) are important for treating HIV infection. HIV-2 exhibits intrinsic resistance to most FDA-approved HIV-1 PI, retaining clinically useful susceptibility only to lopinavir, darunavir, and saquinavir. The mechanisms for this resistance are unclear; although HIV-1 and HIV-2 proteases share just 38 to 49% sequence identity, all critical structural features of proteases are conserved. Structural studies have implicated four amino acids in the ligand-binding pocket (positions 32, 47, 76, and 82). We constructed HIV-2ROD9 molecular clones encoding the corresponding wild-type HIV-1 amino acids (I32V, V47I, M76L, and I82V) either individually or together (clone PRΔ4) and compared the phenotypic sensitivities (50% effective concentration [EC50]) of mutant and wild-type viruses to nine FDA-approved PI. Single amino acid replacements I32V, V47I, and M76L increased the susceptibility of HIV-2 to multiple PI, but no single change conferred class-wide sensitivity. In contrast, clone PRΔ4 showed PI susceptibility equivalent to or greater than that of HIV-1 for all PI. We also compared crystallographic structures of wild-type HIV-1 and HIV-2 proteases complexed with amprenavir and darunavir to models of the PRΔ4 enzyme. These models suggest that the amprenavir sensitivity of PRΔ4 is attributable to stabilizing enzyme-inhibitor interactions in the P2 and P2' pockets of the protease dimer. Together, our results show that the combination of four amino acid changes in HIV-2 protease confer a pattern of PI susceptibility comparable to that of HIV-1, providing a structural rationale for intrinsic HIV-2 PI resistance and resolving long-standing questions regarding the determinants of differential PI susceptibility in HIV-1 and HIV-2.

IMPORTANCE

Proteases are essential for retroviral replication, and HIV-1 and HIV-2 proteases share a great deal of structural similarity. However, only three of nine FDA-approved HIV-1 protease inhibitors (PI) are active against HIV-2. The underlying reasons for intrinsic PI resistance in HIV-2 are not known. We examined the contributions of four amino acids in the ligand-binding pocket of the enzyme that differ between HIV-1 and HIV-2 by constructing HIV-2 clones encoding the corresponding HIV-1 amino acids and testing the PI susceptibilities of the resulting viruses. We found that the HIV-2 clone containing all four changes (PRΔ4) was as susceptible as HIV-1 to all nine PI. We also modeled the PRΔ4 enzyme structure and compared it to existing crystallographic structures of HIV-1 and HIV-2 proteases complexed with amprenavir and darunavir. Our findings demonstrate that four positions in the ligand-binding cleft of protease are the primary cause of HIV-2 PI resistance.

Fluorogenic Assay for Inhibitors of HIV-1 Protease with Sub-picomolar Affinity

A fluorogenic substrate for HIV-1 protease was designed and used as the basis for a hypersensitive assay. The substrate exhibits a k_cat of 7.4 s⁻¹, K_M of 15 μM, and an increase in fluorescence intensity of 104-fold upon cleavage, thus providing sensitivity that is unmatched in a continuous assay of HIV-1 protease. These properties enabled the enzyme concentration in an activity assay to be reduced to 25 pM, which is close to the K_d value of the protease dimer. By fitting inhibition data to Morrison’s equation, K_i values of amprenavir, darunavir, and tipranavir were determined to be 135, 10, and 82 pM, respectively. This assay, which is capable of measuring K_i values as low as 0.25 pM, is well-suited for characterizing the next generation of HIV-1 protease inhibitors.

Inhibitor and substrate binding induced stability of HIV-1 protease against sequential dissociation and unfolding revealed by high pressure spectroscopy and kinetics

High-pressure methods have become an interesting tool of investigation of structural stability of proteins. They are used to study protein unfolding, but dissociation of oligomeric proteins can be addressed this way, too. HIV-1 protease, although an interesting object of biophysical experiments, has not been studied at high pressure yet. In this study HIV-1 protease is investigated by high pressure (up to 600 MPa) fluorescence spectroscopy of either the inherent tryptophan residues or external 8-anilino-1-naphtalenesulfonic acid at 25°C. A fast concentration-dependent structural transition is detected that corresponds to the dimer-monomer equilibrium. This transition is followed by a slow concentration independent transition that can be assigned to the monomer unfolding. In the presence of a tight-binding inhibitor none of these transitions are observed, which confirms the stabilizing effect of inhibitor. High-pressure enzyme kinetics (up to 350 MPa) also reveals the stabilizing effect of substrate. Unfolding of the protease can thus proceed only from the monomeric state after dimer dissociation and is unfavourable at atmospheric pressure. Dimer-destabilizing effect of high pressure is caused by negative volume change of dimer dissociation of -32.5 mL/mol. It helps us to determine the atmospheric pressure dimerization constant of 0.92 μM. High-pressure methods thus enable the investigation of structural phenomena that are difficult or impossible to measure at atmospheric pressure.

A multi-drug resistant HIV-1 protease is resistant to the dimerization inhibitory activity of TLF-PafF

Human immunodeficiency virus type-1 (HIV-1) protease, a homodimeric aspartyl protease, is a critical drug target in designing anti-retroviral drugs to treat HIV/AIDS. Multidrug-resistant (MDR) clinical isolate-769 HIV-1 protease (PDB ID: 3PJ6) has been shown to exhibit expanded active site cavity with wide-open conformation of flaps (Gly48-Gly52) due to the accumulation of multiple mutations. In this study, an HIV-1 protease dimerization inhibitor (PDI)-TLF-PafF, was evaluated against MDR769 HIV-1 protease using X-ray crystallography. It was hypothesized that co-crystallization of MDR769 HIV-1 protease in complex with TLF-PafF would yield either a monomeric or a disrupted dimeric structure. However, crystal structure of MDR769 I10V HIV-1 protease co-crystallized with TLF-PafF revealed an undisrupted dimeric protease structure (PDB ID: 4NKK) that is comparable to the crystal structure of its corresponding apo-protease (PDB ID: 3PJ6). In order to understand the binding profile of TLF-PafF as a PDI, docking analysis was performed using monomeric protease (prepared from the dimeric crystal structure, PDB ID: 4NKK) as docking receptor. Docking analysis revealed that TLF-PafF binds at the N and C termini (dimerization domain) in a clamp shape for the monomeric wild type receptor but not the MDR769 monomeric receptor. TLF-PafF preferentially showed higher binding affinity to the expanded active site cavity of MDR769 HIV-1 protease than to the termini. Irrespective of binding location, the binding affinity of TLF-PafF against wild type receptor (-6.7kcal/mol) was found to be higher compared to its corresponding binding affinity against MDR receptor (-4.6kcal/mol) suggesting that the MDR769 HIV-1 protease could be resistant to the PDI-activity of TLF-PafF, thus supporting the dimeric crystal structure (PDB ID: 4NKK).

Ramachandran analysis of conserved glycyl residues in homologous proteins of known structure

High conservation of glycyl residues in homologous proteins is fairly frequent. It is commonly understood that glycine tends to be highly conserved either because of its unique Ramachandran angles or to avoid steric clash that would arise with a larger side chain. Using a database of aligned 3D structures of homologous proteins we identified conserved Gly in 288 alignment positions from 85 families. Ninety-six of these alignment positions correspond to conserved Gly residue with (φ, ψ) values allowed for non-glycyl residues. Reasons for this observation were investigated by in-silico mutation of these glycyl residues to Ala. We found in 94% of the cases a short contact exists between the C(β) atom of the introduced Ala with the atoms which are often distant in the primary structure. This suggests the lack of space even for a short side chain thereby explaining high conservation of glycyl residues even when they adopt (φ, ψ) values allowed for Ala. In 189 alignment positions, the conserved glycyl residues adopt (φ, ψ) values which are disallowed for Ala. In-silico mutation of these Gly residues to Ala almost always results in steric hindrance involving C(β) atom of Ala as one would expect by comparing Ramachandran maps for Ala and Gly. Rare occurrence of the disallowed glycyl conformations even in ultrahigh resolution protein structures are accompanied by short contacts in the crystal structures and such disallowed conformations are not conserved in the homologues. These observations raise the doubt on the accuracy of such glycyl conformations in proteins.

Avian oncogenesis induced by lymphoproliferative disease virus: a neglected or emerging retroviral pathogen?

Lymphoproliferative disease virus (LPDV) is an exogenous oncogenic retrovirus that induces lymphoid tumors in some galliform species of birds. Historically, outbreaks of LPDV have been reported from Europe and Israel. Although the virus has previously never been detected in North America, herein we describe the widespread distribution, genetic diversity, pathogenesis, and evolution of LPDV in the United States. Characterization of the provirus genome of the index LPDV case from North America demonstrated an 88% nucleotide identity to the Israeli prototype strain. Although phylogenetic analysis indicated that the majority of viruses fell into a single North American lineage, a small subset of viruses from South Carolina were most closely related to the Israeli prototype. These results suggest that LPDV was transferred between continents to initiate outbreaks of disease. However, the direction (New World to Old World or vice versa), mechanism, and time frame of the transcontinental spread currently remain unknown.

Substrate recognition in HIV-1 protease: a computational study

HIV-1 protease is a crucial enzyme for the life cycle of the human immunodeficiency virus, the retrovirus that triggers AIDS. It is well documented that HIV-1 protease mediates the cleavage of Gag, Gag-Pol, and Nef precursor polyproteins and is highly selective concerning the set of 12 different amino acid sequences that cleaves. However, the governing principles and physical parameters, which determine substrate recognition and specificity, remain poorly understood despite the many speculative proposals that abound in the literature. In fact, it has been difficult so far to circumvent the fact that protease's substrates share little sequence identity and lack an obvious consensus binding motif. We have used microsecond time scale MD simulations to quantitatively show that some sequences of the polyprotein Gag-Pol that are not cleaved (nonsubstrates) have in fact a higher affinity to the active site of HIV-1 protease than a substrate; i.e., recognition is not governed by affinity to the active site. On the basis of a detailed analysis of the results and experimental data, we propose that the recognition is based on the geometric specificity of PR:Gag and PR:Gag-Pol multiprotein complex, that selects which residues lie in the specific position that makes them accessible to the active site for cleavage.

Current and Novel Inhibitors of HIV Protease

The design, development and clinical success of HIV protease inhibitors represent one of the most remarkable achievements of molecular medicine. This review describes all nine currently available FDA-approved protease inhibitors, discusses their pharmacokinetic properties, off-target activities, side-effects, and resistance profiles. The compounds in the various stages of clinical development are also introduced, as well as alternative approaches, aiming at other functional domains of HIV PR. The potential of these novel compounds to open new way to the rational drug design of human viruses is critically assessed.

The solution structure of the simian foamy virus protease reveals a monomeric protein

In contrast to orthoretroviruses, foamy viruses (FVs) express their Pol polyprotein from a separate pol-specific transcript. Only the integrase domain is cleaved off, leading to a protease-reverse transcriptase (PR-RT) protein. We purified the separate PR domain (PRshort) of simian FV from macaques by expressing the recombinant gene in Escherichia coli. Sedimentation analyses and size exclusion chromatography indicate that PRshort is a stable monomer in solution. This allowed us to determine the structure of the PRshort monomer using 1426 experimental restraints derived from NMR spectroscopy. The superposition of 20 conformers resulted in a backbone atom rmsd of 0.55 A for residues Gln8-Leu93. Although the overall folds are similar, the macaque simian FV PRshort reveals significant differences in the dimerization interface relative to other retroviral PRs, such as HIV-1 (human immunodeficiency virus type 1) PR, which appear to be rather stable dimers. Especially the flap region and the N- and C-termini of PRshort are highly flexible. Neglecting these regions, the backbone atom rmsd drops to 0.32 A, highlighting the good definition of the central part of the protein. To exclude that the monomeric state of PRshort is due to cleaving off the RT, we purified the complete PR-RT and performed size exclusion chromatography. Our data show that PR-RT is also monomeric. We thus conclude adoption of a monomeric state of PR-RT to be a regulatory mechanism to inhibit PR activity before virus assembly in order to reduce packaging problems. Dimerization might therefore be triggered by additional viral or cellular factors.

Molecular dynamics studies on HIV-1 protease: a comparison of the flap motions between wild type protease and the M46I/G51D double mutant

The emergence of drug-resistant mutants of HIV-1 is a tragic effect associated with conventional long-treatment therapies against acquired immunodeficiency syndrome. These mutations frequently involve the aspartic protease encoded by the virus; knowledge of the molecular mechanisms underlying the conformational changes of HIV-1 protease mutants may be useful in developing more effective and longer lasting treatment regimes. The flap regions of the protease are the target of a particular type of mutations occurring far from the active site. These mutations modify the affinity for both substrate and ligands, thus conferring resistance. In this work, molecular dynamics simulations were performed on a native wild type HIV-1 protease and on the drug-resistant M46I/G51D double mutant. The simulation was carried out for a time of 3.5 ns using the GROMOS96 force field, with implementation of the SPC216 explicit solvation model. The results show that the flaps may exist in an ensemble of conformations between a "closed" and an "open" conformation. The behaviour of the flap tips during simulations is different between the native enzyme and the mutant. The mutation pattern leads to stabilization of the flaps in a semi-open configuration.

Improved purification protocol for wild-type and mutant human foamy virus proteases

Wild-type and an active site mutant (S25T) human foamy virus (HFV) proteases were expressed in fusion with maltose binding protein in Escherichia coli. The mutant enzyme contained a Ser to Thr mutation in the -Asp-Ser-Gly- active site triplet of the enzyme, which forms the "fireman's grip" between the two subunits of the homodimeric enzyme. The fusion proteins were purified by affinity chromatography on amylose resin, cleaved with factor Xa, and the processed enzymes were purified by gel filtration under denaturing condition. Refolding after purification resulted in active enzymes with comparable yields. Furthermore, both enzymes showed similar catalytic activities in an oligopeptide substrate representing an HFV Gag cleavage site. However, the S25T mutant showed increased stability in urea unfolding experiment, in a good agreement with the suggested role of the Thr residue of fireman's grip.

The folding and dimerization of HIV-1 protease: evidence for a stable monomer from simulations

HIV-1 protease (PR) is a major drug target in combating AIDS, as it plays a key role in maturation and replication of the virus. Six FDA-approved drugs are currently in clinical use, all designed to inhibit enzyme activity by blocking the active site, which exists only in the dimer. An alternative inhibition mode would be required to overcome the emergence of drug-resistance through the accumulation of mutations. This might involve inhibiting the formation of the dimer itself. Here, the folding of HIV-1 PR dimer is studied with several simulation models appropriate for folding mechanism studies. Simulations with an off-lattice Gō-model, which corresponds to a perfectly funneled energy landscape, indicate that the enzyme is formed by association of structured monomers. All-atom molecular dynamics simulations strongly support the stability of an isolated monomer. The conjunction of results from a model that focuses on the protein topology and a detailed all-atom force-field model suggests, in contradiction to some reported equilibrium denaturation experiments, that monomer folding and dimerization are decoupled. The simulation result is, however, in agreement with the recent NMR detection of folded monomers of HIV-1 PR mutants with a destabilized interface. Accordingly, the design of dimerization inhibitors should not focus only on the flexible N and C termini that constitute most of the dimer interface, but also on other structured regions of the monomer. In particular, the relatively high phi values for residues 23-35 and 79-87 in both the folding and binding transition states, together with their proximity to the interface, highlight them as good targets for inhibitor design.