An intramolecular FRET system monitors fingers subdomain opening in Klentaq1

Mechano-chemical kinetics of DNA replication: identification of the translocation step of a replicative DNA polymerase

During DNA replication replicative polymerases move in discrete mechanical steps along the DNA template. To address how the chemical cycle is coupled to mechanical motion of the enzyme, here we use optical tweezers to study the translocation mechanism of individual bacteriophage Phi29 DNA polymerases during processive DNA replication. We determine the main kinetic parameters of the nucleotide incorporation cycle and their dependence on external load and nucleotide (dNTP) concentration. The data is inconsistent with power stroke models for translocation, instead supports a loose-coupling mechanism between chemical catalysis and mechanical translocation during DNA replication. According to this mechanism the DNA polymerase works by alternating between a dNTP/PPi-free state, which diffuses thermally between pre- and post-translocated states, and a dNTP/PPi-bound state where dNTP binding stabilizes the post-translocated state. We show how this thermal ratchet mechanism is used by the polymerase to generate work against large opposing loads (∼50 pN).

Dilution of dipolar interactions in a spin-labeled, multimeric metalloenzyme for DEER studies

The metallo-β-lactamases (MβLs), which require one or two Zn(II) ions in their active sites for activity, hydrolyze the amide bond in β-lactam-containing antibiotics, and render the antibiotics inactive. All known MβLs contain a mobile element near their active sites, and these mobile elements have been implicated in the catalytic mechanisms of these enzymes. However little is known about the dynamics of these elements. In this study, we prepared a site-specific, double spin-labeled analog of homotetrameric MβL L1 with spin labels at positions 163 and 286 and analyzed the sample with DEER (double electron electron resonance) spectroscopy. Four unique distances were observed in the DEER distance distribution, and these distances were assigned to the desired intramolecular dipolar coupling (between spin labels at positions 163 and 286 in one subunit) and to intermolecular dipolar couplings. To rid the spin-labeled analog of L1 of the intermolecular couplings, spin-labeled L1 was "diluted" by unfolding/refolding the spin-labeled enzyme in the presence of excess wild-type L1. DEER spectra of the resulting, spin-diluted enzyme revealed a single distance corresponding to the desire intramolecular dipolar coupling.

Conformational dynamics of Thermus aquaticus DNA polymerase I during catalysis

Despite the fact that DNA polymerases have been investigated for many years and are commonly used as tools in a number of molecular biology assays, many details of the kinetic mechanism they use to catalyze DNA synthesis remain unclear. Structural and kinetic studies have characterized a rapid, pre-catalytic open-to-close conformational change of the Finger domain during nucleotide binding for many DNA polymerases including Thermus aquaticus DNA polymerase I (Taq Pol), a thermostable enzyme commonly used for DNA amplification in PCR. However, little has been performed to characterize the motions of other structural domains of Taq Pol or any other DNA polymerase during catalysis. Here, we used stopped-flow Förster resonance energy transfer to investigate the conformational dynamics of all five structural domains of the full-length Taq Pol relative to the DNA substrate during nucleotide binding and incorporation. Our study provides evidence for a rapid conformational change step induced by dNTP binding and a subsequent global conformational transition involving all domains of Taq Pol during catalysis. Additionally, our study shows that the rate of the global transition was greatly increased with the truncated form of Taq Pol lacking the N-terminal domain. Finally, we utilized a mutant of Taq Pol containing a de novo disulfide bond to demonstrate that limiting protein conformational flexibility greatly reduced the polymerization activity of Taq Pol.

Recent insight into the kinetic mechanisms and conformational dynamics of Y-Family DNA polymerases

The kinetic mechanisms by which DNA polymerases catalyze DNA replication and repair have long been areas of active research. Recently discovered Y-family DNA polymerases catalyze the bypass of damaged DNA bases that would otherwise block replicative DNA polymerases and stall replication forks. Unlike DNA polymerases from the five other families, the Y-family DNA polymerases have flexible, solvent-accessible active sites that are able to tolerate various types of damaged template bases and allow for efficient lesion bypass. Their promiscuous active sites, however, also lead to fidelities that are much lower than those observed for other DNA polymerases and give rise to interesting mechanistic properties. Additionally, the Y-family DNA polymerases have several other unique structural features and undergo a set of conformational changes during substrate binding and catalysis different from those observed for replicative DNA polymerases. In recent years, pre-steady-state kinetic methods have been extensively employed to reveal a wealth of information about the catalytic properties of these fascinating noncanonical DNA polymerases. Here, we review many of the recent findings on the kinetic mechanisms of DNA polymerization with undamaged and damaged DNA substrates by the Y-family DNA polymerases, and the conformational dynamics employed by these error-prone enzymes during catalysis.

Following DNA chain extension and protein conformational changes in crystals of a Y-family DNA polymerase via Raman crystallography

Y-Family DNA polymerases are known to bypass DNA lesions in vitro and in vivo. Sulfolobus solfataricus DNA polymerase (Dpo4) was chosen as a model Y-family enzyme for investigating the mechanism of DNA synthesis in single crystals. Crystals of Dpo4 in complexes with DNA (the binary complex) in the presence or absence of an incoming nucleotide were analyzed by Raman microscopy. (13)C- and (15)N-labeled d*CTP, or unlabeled dCTP, were soaked into the binary crystals with G as the templating base. In the presence of the catalytic metal ions, Mg(2+) and Mn(2+), nucleotide incorporation was detected by the disappearance of the triphosphate band of dCTP and the retention of *C modes in the crystal following soaking out of noncovalently bound C(or *C)TP. The addition of the second coded base, thymine, was observed by adding cognate dTTP to the crystal following a single d*CTP addition. Adding these two bases caused visible damage to the crystal that was possibly caused by protein and/or DNA conformational change within the crystal. When d*CTP is soaked into the Dpo4 crystal in the absence of Mn(2+) or Mg(2+), the primer extension reaction did not occur; instead, a ternary protein·template·d*CTP complex was formed. In the Raman difference spectra of both binary and ternary complexes, in addition to the modes of d(*C)CTP, features caused by ring modes from the template/primer bases being perturbed and from the DNA backbone appear, as well as features from perturbed peptide and amino acid side chain modes. These effects are more pronounced in the ternary complex than in the binary complex. Using standardized Raman intensities followed as a function of time, the C(*C)TP population in the crystal was maximal at ∼20 min. These remained unchanged in the ternary complex but declined in the binary complexes as chain incorporation occurred.

dNTP-dependent conformational transitions in the fingers subdomain of Klentaq1 DNA polymerase: insights into the role of the "nucleotide-binding" state

BACKGROUND

Conformational selection plays a key role in the polymerase cycle.

RESULTS

Klentaq1 exists in conformational equilibrium between three states (open, closed, and “nucleotide-binding”) whose level of occupancy is determined by the bound substrate.

CONCLUSION

The “nucleotide-binding” state plays a pivotal role in the reaction pathway.

SIGNIFICANCE

Direct evidence is provided for the role of a conformationally distinct “nucleotide-binding” state during dNTP incorporation. DNA polymerases are responsible for the accurate replication of DNA. Kinetic, single-molecule, and x-ray studies show that multiple conformational states are important for DNA polymerase fidelity. Using high precision FRET measurements, we show that Klentaq1 (the Klenow fragment of Thermus aquaticus DNA polymerase 1) is in equilibrium between three structurally distinct states. In the absence of nucleotide, the enzyme is mostly open, whereas in the presence of DNA and a correctly base-pairing dNTP, it re-equilibrates to a closed state. In the presence of a dNTP alone, with DNA and an incorrect dNTP, or in elevated MgCl2 concentrations, an intermediate state termed the "nucleotide-binding" state predominates. Photon distribution and hidden Markov modeling revealed fast dynamic and slow conformational processes occurring between all three states in a complex energy landscape suggesting a mechanism in which dNTP delivery is mediated by the nucleotide-binding state. After nucleotide binding, correct dNTPs are transported to the closed state, whereas incorrect dNTPs are delivered to the open state.

Single-molecule investigation of substrate binding kinetics and protein conformational dynamics of a B-family replicative DNA polymerase

Replicative DNA polymerases use a complex, multistep mechanism for efficient and accurate DNA replication as uncovered by intense kinetic and structural studies. Recently, single-molecule fluorescence spectroscopy has provided new insights into real time conformational dynamics utilized by DNA polymerases during substrate binding and nucleotide incorporation. We have used single-molecule Förster resonance energy transfer techniques to investigate the kinetics and conformational dynamics of Sulfolobus solfataricus DNA polymerase B1 (PolB1) during DNA and nucleotide binding. Our experiments demonstrate that this replicative polymerase can bind to DNA in at least three conformations, corresponding to an open and closed conformation of the finger domain as well as a conformation with the DNA substrate bound to the exonuclease active site of PolB1. Additionally, our results show that PolB1 can transition between these conformations without dissociating from a primer-template DNA substrate. Furthermore, we show that the closed conformation is promoted by a matched incoming dNTP but not by a mismatched dNTP and that mismatches at the primer-template terminus lead to an increase in the binding of the DNA to the exonuclease site. Our analysis has also revealed new details of the biphasic dissociation kinetics of the polymerase-DNA binary complex. Notably, comparison of the results obtained in this study with PolB1 with those from similar single-molecule studies with an A-family DNA polymerase suggests mechanistic differences between these polymerases. In summary, our findings provide novel mechanistic insights into protein conformational dynamics and substrate binding kinetics of a high fidelity B-family DNA polymerase.

Role of disulfide bridges in archaeal family-B DNA polymerases

The family-B DNA polymerases obtained from the order Thermococcales, for example, Pyrococcus furiosus (Pfu-Pol) are commonly used in the polymerase chain reaction (PCR) because of their high thermostability and low error rates. Most of these polymerases contain four cysteines, arranged as two disulfide bridges. With Pfu-Pol C429-C443 forms one of the disulfides (DB1) and C507-C510 (DB2) the other. Although the disulfides are well conserved in the enzymes from the hyperthermophilic Thermococcales, they are less prevalent in euryarchaeal polymerases from other orders, and tend to be only found in other hyperthermophiles. Here, we report on the effects of deleting the disulfide bridges by mutating the relevant cysteines to serines. A variety of techniques, including differential scanning calorimetry and differential scanning fluorimetry, have shown that both disulfides make a contribution to thermostability, with DB1 being more important than DB2. However, even when both disulfides are removed, sufficient thermostability remains for normal (identical to the wild type) performance in PCR and quantitative (real-time) PCR. Therefore, polymerases totally lacking cysteine are fully compatible with most PCR-based applications. This observation opens the way to further engineering of polymerases by introduction of a single cysteine followed by appropriate chemical modification.

DNA conformational changes at the primer-template junction regulate the fidelity of replication by DNA polymerase

Local conformational changes in primer-template (P/T) DNA are involved in the selective incorporation of dNTP by DNA polymerases (DNAP). Here we use near UV CD and fluorescence spectra of pairs of base analogue probes, substituted either at the primer terminus or in the coding region of the template strand, to monitor and interpret conformational changes at and near the coding base of the template in P/T DNA complexes with Klenow fragment (KF) DNAP as the polymerase moves through the nucleotide addition cycle. Incoming dNTPs and rNTPs encounter binary complexes in which the 3'-end of the primer shuttles between the polymerization (pol) and exonuclease (exo) sites of DNAPs, even for perfectly complementary P/T DNA sequences. We have used spectral changes of probes inserted in both strands to monitor this two-state distribution and determine how it depends on the formation of ternary complexes with both complementary ("correct") and noncomplementary ("incorrect") NTPs and on the local sequence of the P/T DNA. The results show that the relative occupancy of the exo and pol sites is coupled to conformational changes in the P/T DNA of the complex that are partially regulated by the incoming NTP. We find that the coding base on the template strand is unperturbed by the binding of incorrect dNTPs, while binding of complementary rNTPs induces a novel template conformation. We conclude that, in addition to its editing function, primer strand occupancy of the 3'-exo site may also serve as a regulatory checkpoint for accurate dNTP selection in DNA synthesis.

Effect of N2-guanyl modifications on early steps in catalysis of polymerization by Sulfolobus solfataricus P2 DNA polymerase Dpo4 T239W

Translesion DNA polymerases are more efficient at bypass of many DNA adducts than replicative polymerases. Previous work with the translesion polymerase Sulfolobus solfataricus Dpo4 showed a decrease in catalytic efficiency during bypass of bulky N(2)-alkyl guanine (G) adducts with N(2)-isobutylG showing the largest effect, decreasing approximately 120-fold relative to unmodified deoxyguanosine (Zhang, H., Eoff, R. L., Egli, M., Guengerich, F. P. Versatility of Y-family Sulfolobus solfataricus DNA polymerase Dpo4 in translation synthesis past bulky N(2)-alkylguanine adducts. J. Biol. Chem. 2009; 284: 3563-3576). The effect of adduct size on individual catalytic steps has not been easy to decipher because of the difficulty of distinguishing early noncovalent steps from phosphodiester bond formation. We developed a mutant with a single Trp (T239W) to monitor fluorescence changes associated with a conformational change that occurs after binding a correct 2'-deoxyribonucleoside triphosphate (Beckman, J. W., Wang, Q., Guengerich, F. P. Kinetic analysis of nucleotide insertion by a Y-family DNA polymerase reveals conformational change both prior to and following phosphodiester bond formation as detected by tryptophan fluorescence. J. Biol. Chem. 2008; 283: 36711-36723) and, in the present work, utilized this approach to monitor insertion opposite N(2)-alkylG-modified oligonucleotides. We estimated maximal rates for the forward conformational step, which coupled with measured rates of product formation yielded rate constants for the conformational step (both directions) during insertion opposite several N(2)-alkylG adducts. With the smaller N(2)-alkylG adducts, the conformational rate constants were not changed dramatically (<3-fold), indicating that the more sensitive steps are phosphodiester bond formation and partitioning into inactive complexes. With the larger adducts (>or=(2-naphthyl)methyl), the absence of fluorescence changes suggests impaired ability to undergo an appropriate conformational change, consistent with previous structural work.

Global conformational dynamics of a Y-family DNA polymerase during catalysis

High-resolution analysis of protein, and DNA conformational changes during DNA polymerization, established relationships between the enzymatic function and conformational dynamics of individual domains for a DNA polymerase.

Replicative DNA polymerases are stalled by damaged DNA while the newly discovered Y-family DNA polymerases are recruited to rescue these stalled replication forks, thereby enhancing cell survival. The Y-family DNA polymerases, characterized by low fidelity and processivity, are able to bypass different classes of DNA lesions. A variety of kinetic and structural studies have established a minimal reaction pathway common to all DNA polymerases, although the conformational intermediates are not well defined. Furthermore, the identification of the rate-limiting step of nucleotide incorporation catalyzed by any DNA polymerase has been a matter of long debate. By monitoring time-dependent fluorescence resonance energy transfer (FRET) signal changes at multiple sites in each domain and DNA during catalysis, we present here a real-time picture of the global conformational transitions of a model Y-family enzyme: DNA polymerase IV (Dpo4) from Sulfolobus solfataricus. Our results provide evidence for a hypothetical DNA translocation event followed by a rapid protein conformational change prior to catalysis and a subsequent slow, post-chemistry protein conformational change. Surprisingly, the DNA translocation step was induced by the binding of a correct nucleotide. Moreover, we have determined the directions, rates, and activation energy barriers of the protein conformational transitions, which indicated that the four domains of Dpo4 moved in a synchronized manner. These results showed conclusively that a pre-chemistry conformational change associated with domain movements was too fast to be the rate-limiting step. Rather, the rearrangement of active site residues limited the rate of correct nucleotide incorporation. Collectively, the conformational dynamics of Dpo4 offer insights into how the inter-domain movements are related to enzymatic function and their concerted interactions with other proteins at the replication fork.

Faithful replication of genomic DNA by DNA polymerases is crucial for maintaining the genetic integrity of an organism. If DNA becomes damaged, specialized lesion-bypass DNA polymerases are recruited to correct errors in the DNA. A variety of kinetic and structural studies have established a minimal kinetic mechanism common to all DNA polymerases. This mechanism includes several steps involving discrete protein conformational changes. However, the inter-relationship between conformational dynamics and enzymatic function has remained unclear, and identification of the rate-limiting step during nucleotide incorporation has been controversial. In this study, we monitored the directions and rates of motion of domains of a lesion-bypass polymerase during correct nucleotide incorporation. Our study provides several significant findings. First, the binding of a correct nucleotide induces a fast and surprising DNA translocation event. Second, all four domains of the polymerase rapidly move in a synchronized manner before and after the polymerization reaction. Third, repositioning of active site residues is the rate-limiting step during correct nucleotide incorporation. Thus, the motions of the polymerase and the polymerase-bound DNA substrate are tightly coupled to catalysis.

Techniques used to study the DNA polymerase reaction pathway

A minimal reaction pathway for DNA polymerases was established over 20years ago using chemical-quench methods. Since that time there has been considerable interest in noncovalent steps in the reaction pathway, conformational changes involving the polymerase or its DNA substrate that may play a role in substrate specificity. Fluorescence-based assays have been devised in order to study these conformational transitions and the results obtained have added new detail to the reaction pathway.

Local conformations and competitive binding affinities of single- and double-stranded primer-template DNA at the polymerization and editing active sites of DNA polymerases

In addition to their capacity for template-directed 5' --> 3' DNA synthesis at the polymerase (pol) site, DNA polymerases have a separate 3' --> 5' exonuclease (exo) editing activity that is involved in assuring the fidelity of DNA replication. Upon misincorporation of an incorrect nucleotide residue, the 3' terminus of the primer strand at the primer-template (P/T) junction is preferentially transferred to the exo site, where the faulty residue is excised, allowing the shortened primer to rebind to the template strand at the pol site and incorporate the correct dNTP. Here we describe the conformational changes that occur in the primer strand as it shuttles between the pol and exo sites of replication-competent Klenow and Klentaq DNA polymerase complexes in solution and use these conformational changes to measure the equilibrium distribution of the primer between these sites for P/T DNA constructs carrying both matched and mismatched primer termini. To this end, we have measured the fluorescence and circular dichroism spectra at wavelengths of >300 nm for conformational probes comprising pairs of 2-aminopurine bases site-specifically replacing adenine bases at various positions in the primer strand of P/T DNA constructs bound to DNA polymerases. Control experiments that compare primer conformations with available x-ray structures confirm the validity of this approach. These distributions and the conformational changes in the P/T DNA that occur during template-directed DNA synthesis in solution illuminate some of the mechanisms used by DNA polymerases to assure the fidelity of DNA synthesis.

Site-specific labeling of T7 DNA polymerase with a conformationally sensitive fluorophore and its use in detecting single-nucleotide polymorphisms

Like most enzymes, DNA polymerases undergo a large conformational change on the binding of a correct nucleotide. To determine how the conformational change contributes to substrate specificity, we labeled the T7 DNA polymerase with a conformationally sensitive fluorophore at a position that provides a signal coincident with structural changes following nucleotide binding and distinguishes correct base pairs from incorrect ones by the sign of the fluorescence change. Here we describe methods to document that only one site on the polymerase was labeled with the fluorophore based on mass spectral analysis of tryptic peptides. In addition, we show by equilibrium titrations of opposing signals that mismatches and correct bases compete for the same site. This analysis forms an essential basis for characterization of a fluorescently labeled enzyme intended for mechanistic studies. Finally, we show that the labeled enzyme can be used to identify single-nucleotide mutations in a procedure that could be automated.