Loop-mediated isothermal amplification assay targeting the blaCTX-M9 gene for detection of extended spectrum β-lactamase-producing Escherichia coli and Klebsiella pneumoniae

Occurrence of multidrug resistance associated with extended-spectrum β‑lactamase and the biofilm forming ability of Escherichia coli in environmental swine husbandry

Extended-spectrum beta-lactamase (ESBL) production and biofilm formation are mechanisms employed by Escherichia coli to resist beta-lactam antibiotics. Thus, we aimed to examine antibiotic resistance associated with ESBL production and biofilm formation in E. coli isolates from swine farms in Southern Thailand. In total, 159 E. coli isolates were obtained, with 44 isolates identified as ESBL producers, originating from feces (18.87 %) and wastewater (8.80 %) samples. All ESBL-producing strains exhibited resistance to ampicillin (100 %), followed by the cephalosporin group (97.73 %) and tetracycline (84.09 %). Multidrug resistance was observed in 17 isolates (38.63 %). Among the isolates from feces samples, the blaGES gene was the most prevalent, detected in 90 % of the samples, followed by blaCTX-M9 (86.67 %) and blaCTX-M1 (66.67 %), respectively. In the bacteria isolated from wastewater, both blaGES and blaCTX-M9 genes were the predominant resistance genes, detected in 100 % of the isolates, followed by blaCTX-M1 (64.29 %) and blaTEM (50 %), respectively. Strong biofilm formation was observed in 11 isolates (36.67 %) from feces and 4 isolates (25.57 %) from wastewater samples. Notably, nearly 100 % of ESBL-producing strains isolated from feces tested positive for both pgaA and pgaC genes, which play a role in intracellular adhesion and biofilm production. These findings contribute to the understanding and potential control of ESBL-producing E. coli, and the dissemination of antibiotic resistance and biofilm-related genes in swine farms.

Rapid culture-independent loop-mediated isothermal amplification detection of antimicrobial resistance markers from environmental water samples

Environmental water is considered one of the main vehicles for the transmission of antimicrobial resistance (AMR), posing an increasing threat to humans and animals health. Continuous efforts are being made to eliminate AMR; however, the detection of AMR pathogens from water samples often requires at least one culture step, which is time-consuming and can limit sensitivity. In this study, we employed comparative genomics to identify the prevalence of AMR genes within among: Escherichia coli, Klebsiella, Salmonella enterica and Acinetobacter, using publicly available genomes. The mcr-1, blaKPC (KPC-1 to KPC-4 alleles), blaOXA-48, blaOXA-23 and blaVIM (VIM-1 and VIM-2 alleles) genes are of great medical and veterinary significance, thus were selected as targets for the development of isothermal loop-mediated amplification (LAMP) detection assays. We also developed a rapid and sensitive sample preparation method for an integrated culture-independent LAMP-based detection from water samples. The developed assays successfully detected the five AMR gene markers from pond water within 1 h and were 100% sensitive and specific with a detection limit of 0.0625 μg/mL and 10 cfu/mL for genomic DNA and spiked bacterial cells, respectively. The integrated detection can be easily implemented in resource-limited areas to enhance One Health AMR surveillances and improve diagnostics.

Rapid and Sensitive Detection of the Colistin Resistance Gene mcr-3 by Loop-Mediated Isothermal Amplification and Visual Inspection

Objective: The distribution of colistin resistance in mcr-carrying bacteria poses a threat to global public health. In particular, the newly identified mcr-3 allele has spread globally, especially in China, second only to mcr-1. In this study, we aimed to develop a loop-mediated isothermal amplification (LAMP) assay for rapid, sensitive, and visual detection of the presence of the mcr-3 gene. Materials and Methods: A total of 13 clinical bacterial strains and 11 negative strains were used in this study. We designed LAMP Primers, optimized reaction conditions, used three different methods to detect LAMP amplification products: (1) agarose gel electrophoresis, (2) LAMP-hydroxy naphthol blue (HNB) detection, (3) LAMP-SYBR Green I (LAMP-SGI) visual inspection, and evaluated its specificity and sensitivity. Results: The amplification reaction was completed in 1 hr at 62°C under isothermal conditions. The final optimized mixtures contained 100 mM KCl, 100 mM (NH₄)₂SO₄, 20 mM MgSO₄, 1% Triton X-100, 1.2 μL HNB, and 0.5 μL SYBR Green I as additives to the initial reaction mixture. LAMP detection, including two visual methods, LAMP-HNB and LAMP-SGI, of mcr-3 possessed the same specificity and a 10-fold higher sensitivity compared with a conventional polymerase chain reaction assay using the same samples. Conclusion: We successfully established an mcr-3 LAMP detection with portability and rapidity of the reaction by the easily distinguishable color changes in the reaction tubes. This visual LAMP assay for mcr-3 detection was simple, time saving, and economical, especially suited to field laboratories.

Immunochromatography for the diagnosis of Mycoplasma pneumoniae infection: A systematic review and meta-analysis

The aim of this study was to evaluate the diagnostic performance of immunochromatographic tests (ICTs) for the detection of Mycoplasma pneumoniae. Medline/Pubmed, Embase, the Cochrane Library, and ISI Web of Science were searched through June 12, 2019 for relevant studies that used ICTs for the detection of M. pneumoniae infection with polymerase chain reaction (PCR) or microbial culturing as reference standards. Pooled diagnostic accuracy with 95% confidence interval (CI) was calculated using a bivariate random effects model. We also constructed summary receiver operating characteristic curves and calculated the area under the curve (AUC). Statistical heterogeneity was evaluated by χ² test or Cochrane’s Q test. Thirteen studies including 2,235 samples were included in the meta-analysis. The pooled sensitivity and specificity for diagnosing M. pneumoniae infection were 0.70 (95% CI: 0.59–0.79) and 0.92 (95% CI: 0.87–0.95), respectively. The positive likelihood ratio (LR) was 8.94 (95% CI: 4.90–14.80), negative LR 0.33 (95% CI: 0.22–0.46), diagnostic odds ratio 29.20 (95% CI: 10.70–64.20), and AUC 0.904. In subgroup analysis, ICTs demonstrated similar pooled sensitivities and specificities in populations of children only and mixed populations (children + adults). Specimens obtained from oropharyngeal swabs exhibited a higher sensitivity and specificity than those of nasopharyngeal swab. Moreover, pooled estimates of sensitivity and accuracy for studies using PCR as a reference standard were higher than those using culture. The pooled sensitivity and specificity of Ribotest Mycoplasma^®, the commercial kit most commonly used in the included studies, were 0.66 and 0.89, respectively. Overall, ICT is a rapid user-friendly method for diagnosing M. pneumoniae infection with moderate sensitivity, high specificity, and high accuracy. This suggests that ICT may be useful in the diagnostic workup of M. pneumoniae infection; however, additional studies are needed for evaluating the potential impact of ICT in clinical practice.

Genotypic detection of the blaCTX-M-1 gene among extended-spectrum β-lactamase-producing Enterobacteriaceae

OBJECTIVES

Extended-spectrum β-lactamases (ESBLs), a group of β-lactamase enzymes produced by bacteria in the family Enterobacteriaceae, are becoming a major problem in the healthcare community worldwide. Although many attempts have been made in the detection of ESBL-producing bacteria, the cost and speed of detection remains an important challenge. Therefore, this study aimed to develop a rapid, effective and affordable method for detection of the bla_CTX-M-1 ESBL gene by a loop-mediated isothermal amplification (LAMP) technique.

METHODS

Clinical ESBL-producing Enterobacteriaceae, including Escherichia coli and Klebsiella pneumoniae, were isolated and were used as representative strains. The double-disk synergy method was performed to detect ESBL-producing Enterobacteriaceae. Performance of the LAMP method in the detection of bla_CTX-M-1 was compared with conventional PCR in terms of sensitivity and specificity.

RESULTS

The developed LAMP method efficiently identified the presence of the bla_CTX-M-1 gene in ESBL-producing Enterobacteriaceae. It provided similar results to conventional PCR, but the LAMP technique required only 20min of testing time. The accuracy of the LAMP method was confirmed by restriction digestion, which showed the predicted size of the bla_CTX-M-1 gene. In addition, the developed method was comparable with PCR that amplified only the target bla_CTX-M-1 gene in terms of specificity, but LAMP was ca. 1000-fold more sensitive than PCR.

CONCLUSIONS

A rapid assay to detect ESBL-producing Enterobacteriaceae by a LAMP technique was developed in this study. The developed method is sensitive and suitable for rapid screening of bla_CTX-M-1 in routine laboratories with limited resources.

STITCHER: A web resource for high-throughput design of primers for overlapping PCR applications

Overlapping PCR is routinely used in a wide number of molecular applications. These include stitching PCR fragments together, generating fluorescent transcriptional and translational fusions, inserting mutations, making deletions, and PCR cloning. Overlapping PCR is also used for genotyping by traditional PCR techniques and in detection experiments using techniques such as loop-mediated isothermal amplification (LAMP). STITCHER is a web tool providing a central resource for researchers conducting all types of overlapping PCR experiments with an intuitive interface for automated primer design that's fast, easy to use, and freely available online (http://ohalloranlab.net/STITCHER.html). STITCHER can handle both single sequence and multi-sequence input, and specific features facilitate numerous other PCR applications, including assembly PCR, adapter PCR, and primer walking. Field PCR, and in particular, LAMP, offers promise as an on site tool for pathogen detection in underdeveloped areas, and STITCHER includes off-target detection features for pathogens commonly targeted using LAMP technology.