Inactivation of foodborne pathogens by the synergistic combinations of food processing technologies and food-grade compounds

Inactivation of Listeria monocytogenes, Escherichia coli O157:H7, and Staphylococcus aureus by sequential light-emitting diodes (LEDs) treatment at 365 nm and 420 nm

Frequent outbreaks caused by foodborne pathogens pose long-term risks to consumer health. To proactively reduce the load of pathogenic bacteria during food processing, a novel light-based antibacterial approach was developed by sequential application of 365 nm and 420 nm light-emitting diodes (LEDs). Results demonstrated that after treatment with 365 nm (480 J/cm2) followed by 420 nm (307.2 J/cm2), the reduction of Listeria monocytogenes reached 4.05 ± 0.31 log CFU/mL, significantly higher (an additional 1.8 log CFU/mL, P < 0.05) than cumulative reductions achieved by each 365 nm (2.25 ± 0.92 log CFU/mL) and 420 nm (0.02 ± 0.15 log CFU/mL) treatments. Further analysis revealed that the enhancement in bacterial reduction achieved through the sequential treatment with 365 nm and 420 nm was primarily driven by the exposure time to 365 nm. The inactivation mechanisms were investigated, considering possible photothermal, physical, and oxidative effects. Findings showed that the antibacterial effect of sequential treatment was mainly ascribed to intracellular oxidation generated by reactive oxidative species (ROS), namely hydrogen peroxide and superoxide anion. The antibacterial mechanism of two LEDs may result from the sensitization of bacterial cells to excessive ROS, as evidenced by fluorescent intensity measurements and chemical scavenger assays. This research provides new insight for improving the efficacy of UVA and blue light treatment to control food contamination by Listeria.

High pressure processing plus technologies: Enhancing the inactivation of vegetative microorganisms

High pressure processing (HPP) is a non-thermal technology that can ensure microbial safety without compromising food quality. However, the presence of pressure-resistant sub-populations, the revival of sub-lethally injured (SLI) cells, and the resuscitation of viable but non-culturable (VBNC) cells pose challenges for its further development. The combination of HPP with other methods such as moderate temperatures, low pH, and natural antimicrobials (e.g., bacteriocins, lactate, reuterin, endolysin, lactoferrin, lactoperoxidase system, chitosan, essential oils) or other non-thermal processes (e.g., CO2, UV-TiO2 photocatalysis, ultrasound, pulsed electric fields, ultrafiltration) offers feasible alternatives to enhance microbial inactivation, termed as "HPP plus" technologies. These combinations can effectively eliminate pressure-resistant sub-populations, reduce SLI or VBNC cell populations, and inhibit their revival or resuscitation. This review provides an updated overview of microbial inactivation by "HPP plus" technologies and elucidates possible inactivation mechanisms.

Assessment of metabolome diversity in black and white pepper in response to autoclaving using MS- and NMR-based metabolomics and in relation to its remote and direct antimicrobial effects against food-borne pathogens

Piper nigrum L. (black and white peppercorn) is one of the most common culinary spices used worldwide. The current study aims to dissect pepper metabolome using 1H-NMR targeting of its major primary and secondary metabolites. Eighteen metabolites were identified with piperine detected in black and white pepper at 20.2 and 23.9 μg mg-1, respectively. Aroma profiling using HS-SPME coupled to GC-MS analysis and in the context of autoclave treatment led to the detection of a total of 52 volatiles with an abundance of β-caryophyllene at 82% and 59% in black and white pepper, respectively. Autoclaving of black and white pepper revealed improvement of pepper aroma as manifested by an increase in oxygenated compounds' level. In vitro remote antimicrobial activity against food-borne Gram-positive and Gram-negative bacteria revealed the highest activity against P. aeruginosa (VP-MIC 16.4 and 12.9 mg mL-1) and a direct effect against Enterobacter cloacae at ca. 11.6 mg mL-1 for both white and black pepper.

Comparison of autoclaving and γ-radiation impact on four spices aroma profiles and microbial load using HS-SPME GC-MS and chemometric tools

Herbal spices are widely consumed as food additives owing to their distinct aroma and taste as well as a myriad of economic and health value. The aroma profile of four major spices including bay leaf, black pepper, capsicum, and fennel was tested using HS-SPME/GC-MS and in response to the most widely used spices´ processing methods including autoclaving and γ-radiation at low and high doses. Additionally, the impact of processing on microbial contamination of spices was tested using total aerobic count. GC-MS analysis led to the identification of 22 volatiles in bay leaf, 34 in black pepper, 23 in capsicum, and 24 in fennel. All the identified volatiles belonged to oxides/phenols/ethers, esters, ketones, alcohols, sesquiterpene and monoterpene hydrocarbons. Oxides/phenol/ethers were detected at high levels in all tested spices at ca. 44, 28.2, 48.8, 61.1%, in bay leaves, black pepper, capsicum, and fennel, respectively of the total blend and signifying their typical use as spices. Total oxides/phenol/ethers showed an increase in bay leaf upon exposure to γ-radiation from 44 to 47.5%, while monoterpene hydrocarbons were enriched in black pepper upon autoclaving from 11.4 in control to reach 65.9 and 82.6% for high dose and low dose of autoclaving, respectively. Cineole was detected in bay leaf at 17.9% and upon exposure to autoclaving at high dose and γ-radiation (both doses) its level increased by 29-31%. Both autoclaving and γ-radiation distinctly affected aroma profiles in examined spices. Further, volatile variations in response to processing were assessed using multivariate data analysis (MVA) revealing distinct separation between autoclaved and γ-radiated samples compared to control. Both autoclaving at 115 °C for 15 min and radiation at 10 kGy eliminated detected bioburden in all tested spices i.e., reduced the microbial counts below the detection limit (< 10 cfu/g).

An Edible Antibacterial Coating Integrating Lytic Bacteriophage Particles for the Potential Biocontrol of Salmonella enterica in Ripened Cheese

The goal of this research was to create an antibacterial biopolymeric coating integrating lytic bacteriophages against Salmonella enterica for use in ripened cheese. Salmonella enterica is the main pathogen that contaminates food products and the food industry. The food sector still uses costly and non-selective decontamination and disease control methods. Therefore, it is necessary to look for novel pathogen biocontrol technologies. Bacteriophage-based biocontrol seems like a viable option in this situation. The results obtained show promise for food applications since the edible packaging developed (EdiPhage) was successful in maintaining lytic phage viability while preventing the contamination of foodstuff with the aforementioned bacterial pathogen.

Development and investigation of ultrasound-assisted pulsed ohmic heating for inactivation of foodborne pathogens in milk with different fat content

The central objective of this research was to develop an ultrasound-assisted pulsed ohmic heating (POH) system for inactivation of food-borne pathogens in phosphate buffered saline (PBS) and milk with 0-3.6% fat and investigate its bactericidal effect. Combining ultrasound with POH did not significantly affect the temperature profile of samples. Both POH alone and ultrasound-assisted POH took 120 s to heat PBS 60℃. Milk with 0, 1, and 3.6% fat was heated to 60℃ by POH alone and ultrasound-assisted POH after 335, 475, and 525 s, respectively. This is because the electrical conductivity of the samples was the same for POH alone and ultrasound-assisted POH. Despite identical temperature profiles, ultrasound-assisted POH exerted a synergistic effect on the reduction of Escherichia coli O157:H7, Salmonella Typhimurium, Listeria monocytogenes, and Staphylococcus aureus. In particular, the inactivation level of S. Typhimurium in PBS subjected to ultrasound-assisted POH treatment for 120 s corresponding to a treatment temperature of 60℃ was 3.73 log units higher than the sum of each treatment alone. A propidium iodide assay, intracellular protein measurements, and scanning electron microscopy revealed that ultrasound-assisted POH treatment provoked lethal cell membrane damage and leakage of intracellular proteins. Meanwhile, fat in milk reduced the efficacy of the bacterial inactivation of the ultrasound-assisted POH system due to its low electrical conductivity and sonoprotective effect. After ultrasound-assisted POH treatment at 60℃, there were no significant differences (P > 0.05) in the pH, color, and apparent viscosity of milk between the untreated and treated group.

Synergistic bactericidal mechanisms of RF energy simultaneously combined with cinnamon essential oil or epsilon-polylysine against Salmonella revealed at cellular and metabolic levels

Radio frequency (RF) heating and antimicrobials are considered to be effective methods for inactivating food pathogens. This study explored the bactericidal effects against Salmonella of RF heating combined with two kinds of natural antimicrobials possessing different hydrophobic properties and their synergistic bactericidal mechanisms. Results showed that RF heating caused sublethal damage to bacterial cells and enhanced the interaction of cells and antimicrobials, leading to synergistic bactericidal effects of the simultaneous combination of RF heating and antimicrobials. The combination of RF heating and ε-polylysine (ε-PL) further promoted cell morphological alteration, raised membrane permeability, intracellular adenosine triphosphate (ATP) leakage and intracellular reactive oxygen species (ROS) accumulation compared to individual treatment. The simultaneous combination of RF heating and cinnamon essential oil nanoemulsion (CEON) also further enhanced membrane permeability and ROS accumulation compared to individual treatment, but impacts were less than those in the combination of RF heating and ε-PL. The major synergistic bactericidal mechanism of RF heating and CEON was significantly inhibiting intracellular ATP synthesis. The untargeted metabolomics analysis revealed that the combined treatments enhanced disturbances to multiple intracellular metabolisms compared to individual treatment, thus leading to synergistic bactericidal effects against Salmonella. These results provide an in-depth understanding of the synergistic bactericidal mechanisms of the combination of RF heating and natural antimicrobials from cellular and metabolic levels.

Unravelling the impact of fat content on the microbial dynamics and spatial distribution of foodborne bacteria in tri-phasic viscoelastic 3D models

The aim of the current study is to develop and characterise novel complex multi-phase in vitro 3D models, for advanced microbiological studies. More specifically, we enriched our previously developed bi-phasic polysaccharide (Xanthan Gum)/protein (Whey Protein) 3D model with a fat phase (Sunflower Oil) at various concentrations, i.e., 10%, 20%, 40% and 60% (v/v), for better mimicry of the structural and biochemical composition of real food products. Rheological, textural, and physicochemical analysis as well as advanced microscopy imaging (including spatial mapping of the fat droplet distribution) of the new tri-phasic 3D models revealed their similarity to industrial food products (especially cheese products). Furthermore, microbial growth experiments of foodborne bacteria, i.e., Listeria monocytogenes, Escherichia coli, Pseudomonas aeruginosa and Lactococcus lactis on the surface of the 3D models revealed very interesting results, regarding the growth dynamics and distribution of cells at colony level. More specifically, the size of the colonies formed on the surface of the 3D models, increased substantially for increasing fat concentrations, especially in mid- and late-exponential growth phases. Furthermore, colonies formed in proximity to fat were substantially larger as compared to the ones that were located far from the fat phase of the models. In terms of growth location, the majority of colonies were located on the protein/polysaccharide phase of the 3D models. All those differences at microscopic level, that can directly affect the bacterial response to decontamination treatments, were not captured by the macroscopic kinetics (growth dynamics), which were unaffected from changes in fat concentration. Our findings demonstrate the importance of developing structurally and biochemically complex 3D in vitro models (for closer proximity to industrial products), as well as the necessity of conducting multi-level microbial analyses, to better understand and predict the bacterial behaviour in relation to their biochemical and structural environment. Such studies in advanced 3D environments can assist a better/more accurate design of industrial antimicrobial processes, ultimately, improving food safety.

Analyzing the pressure resistant, sublethal injury and resuscitable viable but non-culturable state population of Escherichia coli, Staphylococcus aureus, Bacillus amyloliquefaciens and Lactiplantibacillus plantarum under high pressure processing

This study aimed to analyze and reduce the pressure resistance (PR), sublethal injury (SLI), and viable but non-culturable (VBNC) populations during HPP. Escherichia coli, Staphylococcus aureus, Bacillus amyloliquefaciens and Lactiplantibacillus plantarum were selected for evaluation of PR, SLI and VBNC cell counts and proportions during HPP. The results revealed that the bactericidal efficiency against these strains gradually improved as the processing pressure increased. However, viable bacteria could still be detected, suggesting that there may involve the presence of resistant population that difficult to be killed or revived from SLI. Further detecting the quantity and proportion of PR, SLI and VBNC bacteria found that these state of cells were present during whole HPP treatment. Additionally, the more resistant a bacterial species was to high pressure, the fewer SLI and more resuscitable VBNC (RVBNC) populations it generated, and vice versa. Therefore, correlation analysis was also employed to make the relationship between log reduction, SLI and RVBNC population ratios clearer. The results demonstrated that the log reduction was highly positive correlation with SLI population ratios, and negative correlation with RVBNC population within our detected species at 500 MPa. Furthermore, CO2 and Nisin were employed to combined with HPP to reduce these survivors. Comparing with 233, 218, 241 and 259 MPa for HPP treatment, it took 37, 89, 135 and 229 MPa for HPP + CO2, and 189, 161, 199 and 292 MPa for HPP + Nisin to the first decimal reduction for E. coli, S.aureus, B. amyloliquefaciens and L. plantarum, respectively. The results indicated that HPP combined with CO2 or Nisin could significantly reduce the quantity of PR, SLI, and RVBNC cells during HPP, and provide better bactericidal effects. In conclusion, we quantified the presence of PR, SLI, and VBNC bacteria after high pressure treatment and investigate the effectiveness of HPP combined with CO2 or Nisin to enhance the inactivation of bacteria and reduce the occurrence of PR, SLI, and RVBNC bacteria.

Exploring the Potent Anticancer Activity of Essential Oils and Their Bioactive Compounds: Mechanisms and Prospects for Future Cancer Therapy

Cancer is one of the leading causes of death worldwide, affecting millions of people each year. Fortunately, the last decades have been marked by considerable advances in the field of cancer therapy. Researchers have discovered many natural substances, some of which are isolated from plants that have promising anti-tumor activity. Among these, essential oils (EOs) and their constituents have been widely studied and shown potent anticancer activities, both in vitro and in vivo. However, despite the promising results, the precise mechanisms of action of EOs and their bioactive compounds are still poorly understood. Further research is needed to better understand these mechanisms, as well as their effectiveness and safety in use. Furthermore, the use of EOs as anticancer drugs is complex, as it requires absolute pharmacodynamic specificity and selectivity, as well as an appropriate formulation for effective administration. In this study, we present a synthesis of recent work on the mechanisms of anticancer action of EOs and their bioactive compounds, examining the results of various in vitro and in vivo studies. We also review future research prospects in this exciting field, as well as potential implications for the development of new cancer drugs.

Minimally Processed Vegetables in Brazil: An Overview of Marketing, Processing, and Microbiological Aspects

The global demand for minimally processed vegetables (MPVs) has grown, driven by changes in the population's lifestyle. MPVs are fresh vegetables that undergo several processing steps, resulting in ready-to-eat products, providing convenience for consumers and food companies. Among the processing steps, washing-disinfection plays an important role in reducing the microbial load and eliminating pathogens that may be present. However, poor hygiene practices can jeopardize the microbiological quality and safety of these products, thereby posing potential risks to consumer health. This study provides an overview of minimally processed vegetables (MPVs), with a specific focus on the Brazilian market. It includes information on the pricing of fresh vegetables and MPVs, as well as an examination of the various processing steps involved, and the microbiological aspects associated with MPVs. Data on the occurrence of hygiene indicators and pathogenic microorganisms in these products are presented. The focus of most studies has been on the detection of Escherichia coli, Salmonella spp., and Listeria monocytogenes, with prevalence rates ranging from 0.7% to 100%, 0.6% to 26.7%, and 0.2% to 33.3%, respectively. Foodborne outbreaks associated with the consumption of fresh vegetables in Brazil between 2000 and 2021 were also addressed. Although there is no information about whether these vegetables were consumed as fresh vegetables or MPVs, these data highlight the need for control measures to guarantee products with quality and safety to consumers.

Finger pump microfluidic detection system for methylparaben detection in foods

A novel assay platform consisting of a finger pump microchip (FPM) and a WiFi-based analytical detection platform is presented for measuring the concentration of methylparaben (MP) in commercial foods. In the presented approach, a low quantity (5 μL) of distilled food sample is dripped onto the FPM and undergoes a modified Fenton reaction at a temperature of 40 °C to form a green-colored complex. The MP concentration is then determined by measuring the color intensity (RGB) of the reaction complex using APP software (self-written) installed on a smartphone. The color intensity Red(R) + Green(G) value of the reaction complex is found to be linearly related (R² = 0.9944) to the MP concentration for standard samples with different MP concentrations ranging from 100 to 3000 ppm. The proposed method is used to detect the MP concentrations of 12 real-world commercial foods. The MP concentrations measurements are found to deviate by no more than 5.88% from the results obtained using a conventional benchtop method. The presented platform thus offers a feasible and low-cost alternative to existing macroscale techniques for measuring the MP concentration in commercial foods.

The effects of novel alginate-lauric arginate coatings with temperature on bacterial quality, oxidative stability, and organoleptic characteristics of frozen stored chicken drumsticks

Although alginate has been reported to be used as an edible film and coating in food, to the best of our knowledge, this study is the first to investigate the individual effects of coatings, temperatures, storage times, as well as their interactions, on the bacterial quality, deterioration criteria, and sensory attributes of chicken drumsticks. To accomplish this, six groups of chicken drumsticks were treated with different coatings, temperatures, and storage conditions. The groups included 2 % alginate at 25 °C (Alg₂₅) and 50 °C (Alg₅₀), a mixture of 2 % alginate and 2 % LAE at 25 °C (M₂₅) and 50 °C (M₅₀), besides control untreated samples in distilled water at 25 °C (C₂₅) and 50 °C (C₅₀). The chicken drumsticks were stored at -18 °C for 3 months. The results showed that all treated chicken drumsticks induced a significant reduction in all bacterial counts, as well as a significant decrease in pH and thiobarbituric acid values, with an improvement in all sensory attributes, particularly in the M₂₅ and M₅₀ coated samples compared to the C₂₅ and C₅₀. Furthermore, exposing alginate and LAE to a temperature of 50 °C can increase their antimicrobial activity. In conclusion, the innovative combinations of LAE and alginate can be used successfully to decontaminate chicken carcasses in poultry processing plants.

Surface-enhanced Raman spectroscopy enabled evaluation of bacterial inactivation

An improved understanding of bacterial inactivation mechanisms will provide useful insights for infectious disease control and prevention. We evaluated bacterial response to several inactivation methods using surface-enhanced Raman spectroscopy (SERS). The results indicate that changes in the SERS signal are highly related to cellular disruption and that cellular changes arising after cell inactivation cannot be ignored. The membrane integrity of heat and the combination of UV₂₅₄ and free chlorine (UV₂₅₄/chlorine) treated Pseudomonas syringae (P. syringae) cells were severely disrupted, leading to significantly increased peak intensities. Conversely, ethanol treated bacteria exhibited intact cell morphologies and the SERS spectra remained virtually unchanged. On the basis of time dependent SERS signals, we extracted dominant SERS patterns. Peaks related to nucleic acids accounted for the main changes observed during heat, UV₂₅₄, and UV₂₅₄/chlorine treatment, likely due to their outward diffusion from the cell cytoplasm. For free chlorine treated P. syringae, carbohydrates and proteins on the cell membrane were denatured or lost, resulting in a decrease in related peak intensities. The nucleobases were likely oxidized when treated with UV₂₅₄ and chlorine, thus leading to shifts in the related peaks. The generality of the method was verified using two additional bacterial strains: Escherichia coli and Bacillus subtilis as well as in different water matrices. The results suggest that SERS spectral analysis is a promising means to examine bacterial stress response at the molecular level and has applicability in diverse environmental implementations.

Impact of High-Pressure Processing (HPP) on Selected Quality and Nutritional Parameters of Cauliflower (Brassica oleracea var. Botrytis)

In recent years, innovative food processing methods, such as high-pressure processing (HPP) treatment, have been shown to improve food quality. The purpose of this work was to determine the effects of high-pressure processing (HPP; 400 and 600 MPa for 2 or 5 min, 20 °C) of cauliflower. Microbial shelf-life (total aerobic count and spores), texture, color, drip loss, dry matter, antioxidative capacity, total phenolic content, and ascorbic acid were analyzed before and after processing, as well as during storage (4 °C) for up to 42 days. Among the different treatments, HPP at 600 MPa exhibited low microbial counts between days 14 and 28 of storage, while at 400 MPa already had high bacterial counts between days 7 and 14. HPP at both 400 and 600 MPa was the best method to maintain the color during storage. The texture of the cauliflower did not differ from the control during storage for HPP. For all samples, the dry matter content remained stable during storage, with few differences between treatments. The nutritional quality of high-pressure-processed cauliflower at 600 MPa for 2 min remained high until day 28. The overall results of this study demonstrate that HPP has the potential to preserve the quality of cauliflower.

Molecular modeling of lactoferrin for food and nutraceutical applications: insights from in silico techniques

Lactoferrin is a protein, primarily found in milk that has attracted the interest of the food industries due to its health properties. Nevertheless, the instability of lactoferrin has limited its commercial application. Recent studies have focused on encapsulation to enhance the stability of lactoferrin. However, the molecular insights underlying the changes of structural properties of lactoferrin and the interaction with protectants remain poorly understood. Computational approaches have proven useful in understanding the structural properties of molecules and the key binding with other constituents. In this review, comprehensive information on the structure and function of lactoferrin and the binding with various molecules for food purposes are reviewed, with a special emphasis on the use of molecular dynamics simulations. The results demonstrate the application of modeling and simulations to determine key residues of lactoferrin responsible for its stability and interactions with other biomolecular components under various conditions, which are also associated with its functional benefits. These have also been extended into the potential creation of enhanced lactoferrin for commercial purposes. This review provides valuable strategies in designing novel nutraceuticals for food science practitioners and those who have interests in acquiring familiarity with the application of computational modeling for food and health purposes.

High-Pressure Processing for Sustainable Food Supply

Sustainable food supply has gained considerable consumer concern due to the high percentage of spoilage microorganisms. Food industries need to expand advanced technologies that can maintain the nutritive content of foods, enhance the bio-availability of bioactive compounds, provide environmental and economic sustainability, and fulfill consumers’ requirements of sensory characteristics. Heat treatment negatively affects food samples’ nutritional and sensory properties as bioactives are sensitive to high-temperature processing. The need arises for non-thermal processes to reduce food losses, and sustainable developments in preservation, nutritional security, and food safety are crucial parameters for the upcoming era. Non-thermal processes have been successfully approved because they increase food quality, reduce water utilization, decrease emissions, improve energy efficiency, assure clean labeling, and utilize by-products from waste food. These processes include pulsed electric field (PEF), sonication, high-pressure processing (HPP), cold plasma, and pulsed light. This review describes the use of HPP in various processes for sustainable food processing. The influence of this technique on microbial, physicochemical, and nutritional properties of foods for sustainable food supply is discussed. This approach also emphasizes the limitations of this emerging technique. HPP has been successfully analyzed to meet the global requirements. A limited global food source must have a balanced approach to the raw content, water, energy, and nutrient content. HPP showed positive results in reducing microbial spoilage and, at the same time, retains the nutritional value. HPP technology meets the essential requirements for sustainable and clean labeled food production. It requires limited resources to produce nutritionally suitable foods for consumers’ health.

Effect of gamma radiation on microbial load, physico-chemical and sensory characteristics of common spices for storage

The effect of gamma radiation on the decontamination of microbial population, physico-chemical, radiation sensitivity and sensory characteristics of common spices for storage were evaluated. Spices were irradiated with gamma doses of 0 (as control), 2, 4, 6, 8 and 10 kGy, packed in the glass vials and stored at room temperature (22 ± 2°C) in the laboratory. In this research, Bacillus, Salmonella and Listeria species were identified in un-irradiated spice samples. Results also indicated that gamma radiation reduced the total microbial population compared to control and optimum gamma radiation doses (6 kGy for red chili and turmeric; 4 kGy for cumin, coriander, garlic and black pepper; 2 kGy for ginger powder samples) were identified for decontamination of the organisms in the studied spices. It was concluded that no significant differences before and after gamma radiation were observed in physico-chemical, nutritional and sensory properties but significantly changed in microbial load in spices samples.

Oregano Oil, Epsilon-Polylysine and Citric Acid Assisted Inactivation of Salmonella in Two Kinds of Tahini during Thermal Treatment and Storage

Tahini and tahini-based products are popular with consumers due to their special flavor and high nutritional values, but often have been linked to Salmonella outbreaks. The objective of this study was to compare effects of different kinds of natural antimicrobials on Salmonella inactivation in undiluted and diluted tahini during thermal treatment and storage. Results showed that the Weibull model was more suitable to describe the thermal inactivation behavior of S. montevideo CICC21588 in two kinds of tahini than the first-order model. Inactivation curves were concave-upward in undiluted tahini but concave-downward in diluted tahini. During storage of undiluted tahini, 3% oregano oil caused extra 1.44 or 0.80 log CFU/g reductions after 7 days at 25 °C or 4 °C compared to the control and 0.5% citric acid caused an extra reduction of 0.75 log CFU/g after 7 d at 4 °C. For diluted tahini, 2–3% oregano oil and 0.4–0.5% ε-polylysine reduced more populations compared to undiluted tahini. These antimicrobials all inhibited the growth of S. montevideo during 24 h at 25 °C and ε-polylysine had the best effect. Furthermore, these antimicrobials enhanced the Salmonella inactivation in diluted tahini during thermal treatment, and there was less of a synergistic effect of thermal and antimicrobials in undiluted tahini due to less sublethal injured cells caused by heat. This study may provide useful information for Salmonella inactivation in tahini.

High pressure processing combined with selected hurdles: Enhancement in the inactivation of vegetative microorganisms

High pressure processing (HPP) as a nonthermal processing (NTP) technology can ensure microbial safety to some extent without compromising food quality. However, for vegetative microorganisms, the existence of pressure-resistant subpopulations, the revival of sublethal injury (SLI) state cells, and the resuscitation of viable but nonculturable (VBNC) state cells may constitute potential food safety risks and pose challenges for the further development of HPP application. HPP combined with selected hurdles, such as moderately elevated or low temperature, low pH, natural antimicrobials (bacteriocin, lactate, reuterin, endolysin, lactoferrin, lactoperoxidase system, chitosan, essential oils), or other NTP (CO₂ , UV-TiO₂ photocatalysis, ultrasound, pulsed electric field, ultrafiltration), have been highlighted as feasible alternatives to enhance microbial inactivation (synergistic or additive effect). These combinations can effectively eliminate the pressure-resistant subpopulation, reduce the population of SLI or VBNC state cells and inhibit their revival or resuscitation. This review provides an updated overview of the microbial inactivation by the combination of HPP and selected hurdles and restructures the possible inactivation mechanisms.