Investigation on the correlation between changes in water and texture properties during the processing of surimi from golden pompano (Trachinotus ovatus)

Quality and flavor development of solid-state fermented surimi with Actinomucor elegans: A perspective on the impacts of carbon and nitrogen sources

The influence of four carbon and nitrogen substrates on the quality and flavor of a novel surimi-based product fermented with Actinomucor elegans (A. elegans) was investigated, with a focus on carbon and nitrogen catabolite repression. The results showed that the substrate significantly affected mycelial growth, enzyme activities, and the metabolites of A. elegans. Although glucose significantly promoted A. elegans growth by 116.69%, it decreased enzyme secretion by 69.79% for α-amylase and 59.80% for protease, most likely by triggering the carbon catabolite repression pathway. Starch, soy protein, and wheat gluten substantially affected the textural properties of the fermented surimi. Furthermore, wheat gluten significantly promoted the protease activity (102.70%) and increased protein degradation during surimi fermentation. The fishy odor of surimi was alleviated through fermentation, and a correlation between the volatile compounds and A. elegans metabolism was observed. These results explore fermentation substrates in filamentous fungi metabolism from a catabolite repression perspective.

Effect of Soy Protein Isolate on the Quality Characteristics of Silver Carp Surimi Gel during Cold Storage

This study mainly investigated the effect of soy protein isolate (SPI) on the gel quality of silver carp surimi under different storage conditions (storage temperatures of 4 °C, -20 °C, and -40 °C, and storage times of 0, 15, and 30 d). The results found that 10% SPI could inhibit the growth of ice crystals, improve the water distribution, enhance the water holding capacity of the gels, and strengthen the interaction between surimi and proteins. Compared to the control group, the composite silver carp surimi gel exhibited superior quality in texture, chemical interactions, and rheological properties during cold storage. Fourier transform infrared spectroscopy revealed an increasing trend in α-helix and β-turn content and a decreasing trend of β-sheet and random coil content. As storage time increased, the gel deterioration during cold storage inhibitory effect of the treatment group was superior to the control group, with the best results observed at -40 °C storage conditions. Overall, SPI was a good choice for maintaining the quality of silver carp surimi gel during cold storage, which could significantly reduce the changes in the textural properties during cold storage with improved water holding capacity.

Quality properties of fish ball with abalone and its relationship with sensory properties

In this work, whiteness, water-holding capacity, gel strength, textural profile analysis were performed to examine the quality of fish balls with abalone (FBA). In addition, a correlation between quality and sensory properties was established. The addition of abalone significantly increased the water holding capacity, gel strength and textural properties of FBA, and decreased their whiteness, the best overall quality was achieved at 9 % w/w abalone addition. The E-nose and E-tongue results revealed that the addition of abalone changed the flavour of FBA. HS-SPME-GC-MS identified 65 volatile organic compounds (VOCs) and proved to be effective in reducing fishy flavour. E-nose can distinguish between the VOCs in FBA. Moreover, Umami and 1-octen-3-ol can serve as important indicators to observe changes in the quality of FBA, as they were positively connected with WHC, gumminess, chewiness, resilience, a*, hexanal, etc. The results provided a theoretical basis for the development of abalone and surimi products.

Effect of к-carrageenan on saltiness perception and texture characteristic related to salt release in low-salt surimi

The purpose of this study was to investigate the effect of Kappa (к)-carrageenan on texture and perception of saltiness of low salt surimi. The low-field nuclear magnetic resonance (LF-NMR) and microstructure results showed that к-carrageenan could promote the formation of more immobilized water in low salt surimi gel, change its matrix structure, and lead to the uneven spatial distribution of sodium, thus enhancing saltiness perception. The rheological properties of surimi showed that к-carrageenan could increase the network strength of low salt surimi gel and improve its thermostability. Furthermore, the low salt surimi gel added with к-carrageenan has lower cooking loss, higher water holding capacity (WHC), gel strength and improved texture properties. Therefore, к-carrageenan has the effects of improving the quality and increasing salt perception of surimi gel. This study provides a new method for reducing salt consumption in food industry.

Unlocking the Potential of Microwave Sterilization Technology in Ready-to-Eat Imitation Crab Meat Production

Microwave sterilization is a novel potential sterilization technology to improve food quality. An industrial microwave sterilization system was used to sterilize imitation crab meat under thermal processing intensity F0 = 1, 2, 3. The characteristics of the microwave process, such as heating rate, processing time, and C100, were calculated. In addition, the quality of processed imitation crab meat was investigated. Compared with the conventional retort method, microwave sterilization significantly shortened the processing time of imitation crab meat by 63.71% to 72.45%. Under the same thermal processing intensity, microwave sterilization has demonstrated better results than retort sterilization in terms of water-holding capacity, color, and texture. Furthermore, microwave-treated imitation crab meat ingredients had a greater capacity to bind water molecules and obtained a more appropriate secondary protein structure. In addition, microwave technology can better preserve the unsaturated fatty acids (UFA) of imitation crab meat, which are 9.14%, 1.19%, and 0.32% higher than the traditional method at F0 = 1, 2, 3. The results would provide useful data for the subsequent research and development of ready-to-eat surimi products.

Effects of cold atmospheric plasma on endogenous enzyme activity and muscle protein oxidation in Trachinotus ovatus

In this study, we investigated the effects of cold atmospheric plasma (CAP) technology on endogenous enzyme characteristics and muscle protein properties of the golden pomfret (Trachinotus ovatus) under different treatment power and time conditions. Results showed that the enzymatic activity of cathepsin B, L, and calpain in crude protease extracts (CPE) decreased significantly as the treatment power and treatment time of CAP increased (p < 0.05). Oxidative degradation of the CPE after exposure to CAP resulted in significant changes in the structure, total sulfhydryl, and carbonyl content of the CPE (p < 0.05). CAP of an appropriate intensity resulted in significant improvements in the color parameters, hydration properties, and textural property parameters of muscle proteins (p < 0.05). These results suggest that CAP, as a non-thermophysical modification technique, can inhibit the activity of endogenous enzymes as well as alter the protein function in food.

Correlation between Water Characteristics and Gel Strength in the Gel Formation of Golden Pompano Surimi Induced by Dense Phase Carbon Dioxide

The relationship between the gel quality of golden pompano surimi treated with dense phase carbon dioxide (DPCD) and changes in water characteristics was evaluated. Low-field nuclear magnetic resonance (LF-NMR) and nuclear magnetic resonance imaging were used to monitor changes in the water status of surimi gel under different treatment conditions. Whiteness, water-holding capacity and gel strength were used as the quality indicators of the surimi gel. The results showed that DPCD treatment could significantly increase the whiteness of surimi and the strength of the gel, while the water-holding capacity decreased significantly. LF-NMR analysis showed that, as the DPCD treatment intensity increased, the relaxation component T₂₂ shifted to the right, T₂₃ shifted to the left, the proportion of A₂₂ decreased significantly (p < 0.05) and the proportion of A₂₃ increased significantly (p < 0.05). A correlation analysis of water characteristics and gel strength showed that the water-holding capacity of surimi induced by DPCD was strongly positively correlated with gel strength, while A₂₂ and T₂₃ were strongly negatively correlated with gel strength. This study provides helpful insights into the quality control of DPCD in surimi processing and also provides an approach for the quality evaluation and detection of surimi products.

Quality changes and indicator proteins of Litopenaeus vannamei based on label-free proteomics analysis during partial freezing storage

Litopenaeus vannamei are known to deteriorate in quality during low-temperature storage. This study demonstrated the potential protein indicators of partial freezing of stored shrimp by traditional quality parameters and label-free based proteomic techniques. The carbonyl content and myofibril fragmentation index (MFI) of shrimp increased from 0.56 ± 0.03 to 2.14 ± 0.03 nmol/mg and 13.09 ± 0.14 to 54.93 ± 0.96, respectively. Within the extension of storage, the trichloroacetic acid (TCA), cooking loss and whiteness significantly increased. A total of 240 proteins changed in abundance at 10, 20, and 30 days compared to fresh samples. Projectin, ribosomal protein and histone were potential biomarkers for protein denaturation and oxidation in shrimp muscle. Myosin heavy chain and glyceraldehyde-3-phosphate dehydrogenase corresponded with the degradation of muscle proteins. Myosin light chain, tubulin alpha chain, and heat shock protein correlated with tenderness and water holding capacity; meantime, malate dehydrogenase and hemocyanin can serve as color indicators. Further study of the properties of these indicator proteins can inform their exploitation as quality indicator proteins during partial freezing storage.

Processing Technology and Quality Change during Storage of Fish Sausages with Textured Soy Protein

The addition of textured soy protein (TSP) to surimi products extends the supply of fish protein and improves nutritional and sensory properties, which has attracted considerable research interest. In this study, a single-factor experiment and orthogonal experiment were used to determine the optimal process conditions and to assess the quality indicators of fish sausages during frozen storage. The results indicated that the optimal process conditions were as follows: the addition of 15% TSP, 8% potato starch, and 5% lard oil, resulting in a gel strength of 1894.32 g·cm. During storage of the formulation-optimized fish sausages for 180 days, the water-holding capacity, whiteness, texture properties, and gel strength of the fish sausages all decreased, whereas cooking loss, thawing loss, thiobarbituric acid reactive substances value, and total volatile base nitrogen value all increased. Consequently, TSP is beneficial to improve the gel strength and sensory score of fish sausages. The quality of fish sausages with added TSP was acceptable after storage at -18 °C, for 120 days.

Improving the Gel Quality of Threadfin Bream (Nemipterus spp.) Surimi Using Salted Duck Egg White Powder

The effect of salted duck egg white powder (SDEWP) as a source of salt at different salt equivalent (SE) levels (0−2.5% SE) on gel qualities and texture properties of threadfin bream surimi was investigated. SDEWP possessed a high protein (64.59%) and salt (34.86%) concentration. The breaking force of surimi gel increased by the amount of SDEWP (p < 0.05). The addition of SDEWP up to 1.5% SE into the surimi gel has significantly increased the deformation (13.8%) and decreased the expressible moisture content (38.5%). Hardness, gumminess, and chewiness were augmented as higher levels of SDEWP were added, whereas cohesiveness decreased when the SDEWP above 1.5% SE was used. The incorporation of SDEWP had no significant effect on the springiness (p < 0.05). Less proteolytic degradation was observed in the surimi gel fortified with SDEWP. A higher amount of added SDEWP enhanced the whiteness of the surimi gel (p < 0.05). A denser and more ordered gel network was attained when SDEWP with 1.5% SE was added. SDEWP could be exploited as a source for salt and non-fish proteins in threadfin bream surimi, in which SDEWP containing 1.5% SE could significantly improve the quality of surimi gel.

Emerging Food Packaging Applications of Cellulose Nanocomposites: A Review

Cellulose is the most abundant biopolymer on Earth, which is synthesized by plants, bacteria, and animals, with source-dependent properties. Cellulose containing β-1,4-linked D-glucoses further assembles into hierarchical structures in microfibrils, which can be processed to nanocellulose with length or width in the nanoscale after a variety of pretreatments including enzymatic hydrolysis, TEMPO-oxidation, and carboxymethylation. Nanocellulose can be mainly categorized into cellulose nanocrystal (CNC) produced by acid hydrolysis, cellulose nanofibrils (CNF) prepared by refining, homogenization, microfluidization, sonification, ball milling, and the aqueous counter collision (ACC) method, and bacterial cellulose (BC) biosynthesized by the Acetobacter species. Due to nontoxicity, good biodegradability and biocompatibility, high aspect ratio, low thermal expansion coefficient, excellent mechanical strength, and unique optical properties, nanocellulose is utilized to develop various cellulose nanocomposites through solution casting, Layer-by-Layer (LBL) assembly, extrusion, coating, gel-forming, spray drying, electrostatic spinning, adsorption, nanoemulsion, and other techniques, and has been widely used as food packaging material with excellent barrier and mechanical properties, antibacterial activity, and stimuli-responsive performance to improve the food quality and shelf life. Under the driving force of the increasing green food packaging market, nanocellulose production has gradually developed from lab-scale to pilot- or even industrial-scale, mainly in Europe, Africa, and Asia, though developing cost-effective preparation techniques and precisely tuning the physicochemical properties are key to the commercialization. We expect this review to summarise the recent literature in the nanocellulose-based food packaging field and provide the readers with the state-of-the-art of this research area.

LF-NMR as a tool for predicting the 3D printability of surimi-starch systems

In this study, surimi from golden pompanos was mixed with starch to form a surimi-starch system. The water properties, rheological properties, and three-dimensional (3D) printability of the surimi-starch were measured. Cluster analysis results showed that the 3D printability was closely related to the type and addition content of starch, and the water and rheological properties. The low-field nuclear magnetic resonance (LF-NMR) parameters were used to predict 3D printability using polynomial regression models. The correlation coefficients (R²) for 3D printing accuracy and stability were 0.88 and 0.93, and the root mean square error (RMSE) values were 0.20% and 4.59%, respectively. In the verification test, the R² for the two models were 0.85 and 0.89, and the RMSE values were 0.20% and 1.06%, respectively. The nonlinear surface regression fitting exhibited superior predictive performance. Therefore, LF-NMR is a good non-destructive tool for quickly and accurately predicting the 3D printability of the surimi-starch systems.

Insight into the correlations among rheological behaviour, protein molecular structure and 3D printability during the processing of surimi from golden pompano (Trachinotus ovatus)

To investigate the 3D printability of surimi from golden pompano, the rheological properties, protein molecular structure, and 3D printability of food inks from every step of surimi processing were measured, and their correlations were analysed. The results showed that surimi from chopping (surimi-C), chopping with salt (surimi-CS) and setting (surimi-S) were suitable for 3D printing, among which surimi-CS had the best shape fidelity. The clustering analysis of variables revealed that the yield stress and A_F could be used as indexes to characterize extrusion and deposition behaviour of surimi, respectively. The accuracy of 3D printing was affected by the extrusion property of the food ink, which was controlled by the ionic bond content. The stability of 3D printing was affected by the self-supporting capacity of the food ink, which was controlled by the hydrogen bond and hydrophobic interaction contents. The results provided theoretical guidance for developing 3D printing of surimi ingredients.

Insight into the Effect of Ice Addition on the Gel Properties of Nemipterus virgatus Surimi Gel Combined with Water Migration

The effect of the amount of ice added (20–60%) on the gel properties and water migration of Nemipterus virgatus surimi gel obtained with two-stage heat treatment was studied. The gel strength and water-holding capability (WHC) of the surimi gel with 30% ice added were significantly higher than those of other treatment groups (p < 0.05). The addition of 30% ice was conducive to the increase of protein β-sheet proportion during heat treatment, exposing more reactive sulfhydryl groups. These promoted the combination of protein-protein through disulfide bonds and hydrophobic-hydrophobic interactions, forming an ordered three-dimensional gel network structure. Meanwhile, the increase in hydrogen bonds promoted the protein-water interaction. Low-field nuclear magnetic resonance analysis showed that more bound water was locked in the gel system, reducing the migration of immobile water to free water and finally showing better gel properties. When the amount of ice added was insufficient (20%), the gel structure lacked the support of immobile water, resulting in deterioration of gel strength. However, excessive addition of ice (>30%) was not conducive to the combination of protein-protein and protein-water, forming a large and rough gel structure, resulting in the migration of immobile water to free water and ultimately exhibited weak gel properties.

The relationship between rheological and textural properties of shrimp surimi adding starch and 3D printability based on principal component analysis

The three-dimensional (3D) printing properties of pure shrimp surimi are poor and require improvement via the addition of other materials. The effects of the different amounts of potato starch, corn starch, tapioca starch, and cross-linked starch (CLS) (0%, 3%, 6%, or 9%, respectively) on the 3D printing properties and material properties of white shrimp (Litopenaeus vannamei) surimi were evaluated in the present study. The results showed that the apparent viscosity, G', and G'' of the samples were increased by adding 6% CLS, making it easy to extrude the sample from the nozzle and resulting in an improvement in the printing accuracy. In addition, after adding 6% CLS, the hardness, adhesiveness, and springiness of the sample were increased, which assist with maintaining the shape of the printed material and improve the printing stability of the sample. Moreover, the water holding capacity of shrimp surimi increased as a result of the addition of 6% CLS. In summary, 6% CLS can improve the material properties of shrimp surimi and make it more suitable for 3D printing.