Solid-state fermentation in multi-well plates to assess pretreatment efficiency of rot fungi on lignocellulose biomass

New Inonotus Polysaccharides: Characterization and Anticomplementary Activity of Inonotus rheades Mycelium Polymers

Inonotus is a small genus of xylotrophic basidiomycetes and a source of bioactive fungochemicals among which a special place is occupied by polymeric compounds. In this study, polysaccharides that are widespread in Europe, Asia, and North America and a poorly understood fungal species, I. rheades (Pers.) Karst. (fox polypore), were investigated. Water-soluble polysaccharides of I. rheades mycelium were extracted, purified, and studied using chemical reactions, elemental and monosaccharide analysis, UV-Vis and FTIR spectroscopy, gel permeation chromatography, and linkage analysis. Five homogenic polymers (IRP-1-IRP-5) with molecular weights of 110-1520 kDa were heteropolysaccharides that consist mainly of galactose, glucose, and mannose. The dominant component, IRP-4, was preliminary concluded to be a branched (1→3,6)-linked galactan. Polysaccharides of I. rheades inhibited the hemolysis of sensitized sheep erythrocytes by complement from human serum, signifying anticomplementary activity with the greatest effects for the IRP-4 polymer. These findings suggest that I. rheades mycelium is a new source of fungal polysaccharides with potential immunomodulatory and anti-inflammatory properties.

Chemical Profiles, In Vitro Antioxidant and Antifungal Activity of Four Different Lavandula angustifolia L. EOs

Lavandula angustifolia L., known as lavender, is an economically important Lamiaceae due to the production of essential oils (EOs) for the food, cosmetic, pharmaceutical and medical industries. The purpose of this study was to determine the chemical composition of EOs isolated from four inflorescences of L. angustifolia L. collected in different geographical areas: central-southern Italy (LaCC, LaPE, LaPS) and southern France (LaPRV). The essential oils, obtained by steam distillation from plants at the full flowering stage, were analyzed using gas chromatography coupled with mass spectrometry (GC-MS). More than 70 components identified in each sample showed significant variability among the main constituents. The four EOs analyzed contained the following as main component: linalool (from 30.02% to 39.73%), borneol (13.65% in LaPE and 16.83% in La PS), linalyl acetate (24.34% in LaCC and 31.07% in LaPRV). The EOs were also evaluated for their in vitro antifungal activity against two white rot fungi (Phanerochaete chrysosporium and Trametes cingulata) as potential natural biodeteriogens in the artworks field, and against Sclerotium rolfsii, Botrytis cinerea and Fusarium verticilloides responsible for significant crop yield losses in tropical and subtropical areas. The results confirm a concentration-dependent toxicity pattern, where the fungal species show different sensitivity to the four EOs. The in vitro antioxidant activity by DPPH assay showed better scavenging activity on LaCC (IC₅₀ 26.26 mg/mL) and LaPRV (IC₅₀ 33.53 mg/mL), followed by LaPE (IC₅₀ 48.00 mg/mL) and LaPS (IC₅₀ 49.63 mg/mL). The potential application of EOs as a green method to control biodeterioration phenomena on a work of art on wood timber dated 1876 was evaluated.

Development of different pretreatments and related technologies for efficient biomass conversion of lignocellulose

Lignocellulose, a kind of biological resource widely existing in nature, which can be transformed into value-added biochemical products through saccharification, fermentation or chemical catalysis. Pretreatments are the necessary step to increase the accessibility and digestibility of lignocellulose. This paper comprehensively reviewed different pretreatment progress of lignocellulose in recent year, including mechanical/thermal, biological, inorganic solvent, organic solvent and unconventional physical-chemical pretreatments, focusing on quantifying the influence of pretreatments on subsequent biomass conversion. In addition, related pretreatment techniques such as genetic engineering, reactor configurations, downstream process and visualization technology of pretreatment were discussed. Finally, this review presented the challenge of lignocellulose pretreatment in the future.

Copper-induced Production of Laccases for Lignin Depolymerisation and Micropollutant Degradation by Laccase-mediator Systems

Contaminants deriving from human activities represent a constantly growing threat to our environment and have a direct impact on plant and animal health. To alleviate this ecological imbalance, biocatalysis offers a green and sustainable alternative to conventional chemical processes. Due to their broad specificity, laccases are enzymes possessing excellent potential for synthetic biotransformations in various fields as well as for the degradation of organic contaminants. Herein, we produced laccases in submerged cultures of P. ostreatus and T. versicolor in three different media. The fungi/medium combination leading to the highest enzymatic activity was malt extract (2%) + yeast extract (3%) + glucose (0.8%). Laccase production was further increased by supplementing this medium with different concentrations of Cu²⁺, which also provided a better understanding of the induction effect. Additionally, we disclose preliminary results on the interaction of laccases with mediators (ABTS and violuric acid - VA) for two main applications: lignin depolymerisation with guaiacylglycerol-β-guaiacyl ether (GBG) as lignin model and micropollutant degradation with Remazol Brilliant Blue (RBB) as enzymatic bioremediation model. Promising results were achieved using VA to increase depolymerization of GBG dimer and to enhance RBB decolorisation.

Isolation and Screening of Microorganisms for the Effective Pretreatment of Lignocellulosic Agricultural Wastes

Lignocellulosic waste is the most abundant biorenewable biomass on earth, and its hydrolysis releases highly valued reducing sugars. However, the presence of lignin in the biopolymeric structure makes it highly resistant to solubilization thereby hindering the hydrolysis of cellulose and hemicellulose. Microorganisms are known for their potential complex enzymes that play a dominant role in lignocellulose conversion. Therefore, the current study was designed to isolate and screen potential microorganisms for their selective delignification ability for the pretreatment of lignocellulosic biomass. An extensive isolation and screening procedure yielded 36 desired isolates (22 bacteria, 7 basidiomycete fungi, and 7 filamentous fungi). Submerged cultivation of these desired microorganisms revealed 4 bacteria and 10 fungi with potent lignocellulolytic enzyme activities. The potent isolates were identified as Pleurotus, Trichoderma, Talaromyces, Bacillus, and Chryseobacterium spp. confirmed by morphological and molecular identification. The efficiency of these strains was determined through enzyme activities, and the degraded substrates were analyzed through scanning electron microscopy (SEM) and X-ray diffraction (XRD). Among all isolated microbes, Pleurotus spp. were found to have high laccase activity. The cellulose-decomposing and selective delignification strains were subjected to solid-state fermentation (SSF). SSF of field waste corn stalks as a single-carbon source provides Pleurotus spp. better condition for the secretion of ligninolytic enzymes. These isolated ligninolytic enzymes producing microorganisms may be used for the effective pretreatment of lignocellulosic agricultural wastes for the production of high value-added natural products by fermentation.

Evolution of Fungal Carbohydrate-Active Enzyme Portfolios and Adaptation to Plant Cell-Wall Polymers

The postindustrial era is currently facing two ecological challenges. First, the rise in global temperature, mostly caused by the accumulation of carbon dioxide (CO₂) in the atmosphere, and second, the inability of the environment to absorb the waste of human activities. Fungi are valuable levers for both a reduction in CO₂ emissions, and the improvement of a circular economy with the optimized valorization of plant waste and biomass. Soil fungi may promote plant growth and thereby increase CO₂ assimilation via photosynthesis or, conversely, they may prompt the decomposition of dead organic matter, and thereby contribute to CO₂ emissions. The strategies that fungi use to cope with plant-cell-wall polymers and access the saccharides that they use as a carbon source largely rely on the secretion of carbohydrate-active enzymes (CAZymes). In the past few years, comparative genomics and phylogenomics coupled with the functional characterization of CAZymes significantly improved the understanding of their evolution in fungal genomes, providing a framework for the design of nature-inspired enzymatic catalysts. Here, we provide an overview of the diversity of CAZyme enzymatic systems employed by fungi that exhibit different substrate preferences, different ecologies, or belong to different taxonomical groups for lignocellulose degradation.

Estimation of glucosamine in biomass of Trichoderma reesei cultivated on lignocellulosic substrates

Effects of the compositions of lignocellulosic substrate including hemicellulose, cellulose, lignin, and protein on the glucosamine content in biomass of Trichoderma reesei TISTR3080 were studied. A synthetic solid surface media containing different ratios of xylan (hemicellulose), carboxymethyl cellulose (cellulose), lignin, and various concentrations of yeast extract (source of protein) were used to cultivated T. reesei. Regression analysis identified significant individual and interaction factors that affected glucosamine quantity in T. reesei biomass. A regression model was developed to estimate the glucosamine content in biomass of T. reesei from the compositions of the lignocellulosic substrate. An acceptable error (not more than 10%) of the regression model was obtained from validation with the experimental results of glucosamine content in biomass of T. reesei cultivated on lignocellulosic solid surface media made from copra waste and banana peel.

Gene family expansions and transcriptome signatures uncover fungal adaptations to wood decay

Because they comprise some of the most efficient wood‐decayers, Polyporales fungi impact carbon cycling in forest environment. Despite continuous discoveries on the enzymatic machinery involved in wood decomposition, the vision on their evolutionary adaptation to wood decay and genome diversity remains incomplete. We combined the genome sequence information from 50 Polyporales species, including 26 newly sequenced genomes and sought for genomic and functional adaptations to wood decay through the analysis of genome composition and transcriptome responses to different carbon sources. The genomes of Polyporales from different phylogenetic clades showed poor conservation in macrosynteny, indicative of genome rearrangements. We observed different gene family expansion/contraction histories for plant cell wall degrading enzymes in core polyporoids and phlebioids and captured expansions for genes involved in signalling and regulation in the lineages of white rotters. Furthermore, we identified conserved cupredoxins, thaumatin‐like proteins and lytic polysaccharide monooxygenases with a yet uncharacterized appended module as new candidate players in wood decomposition. Given the current need for enzymatic toolkits dedicated to the transformation of renewable carbon sources, the observed genomic diversity among Polyporales strengthens the relevance of mining Polyporales biodiversity to understand the molecular mechanisms of wood decay.

Fungal Treatment for the Valorization of Technical Soda Lignin

Technical lignins produced as a by-product in biorefinery processes represent a potential source of renewable carbon. In consideration of the possibilities of the industrial transformation of this substrate into various valuable bio-based molecules, the biological deconstruction of a technical soda lignin by filamentous fungi was investigated. The ability of three basidiomycetes (Polyporus brumalis, Pycnoporus sanguineus and Leiotrametes menziesii) to modify this material, the resultant structural and chemical changes, and the secreted proteins during growth on this substrate were investigated. The three fungi could grow on the technical lignin alone, and the growth rate increased when the media were supplemented with glucose or maltose. The proteomic analysis of the culture supernatants after three days of growth revealed the secretion of numerous Carbohydrate-Active Enzymes (CAZymes). The secretomic profiles varied widely between the strains and the presence of technical lignin alone triggered the early secretion of many lignin-acting oxidoreductases. The secretomes were notably rich in glycoside hydrolases and H₂O₂-producing auxiliary activity enzymes with copper radical oxidases being induced on lignin for all strains. The lignin treatment by fungi modified both the soluble and insoluble lignin fractions. A significant decrease in the amount of soluble higher molar mass compounds was observed in the case of P. sanguineus. This strain was also responsible for the modification of the lower molar mass compounds of the lignin insoluble fraction and a 40% decrease in the thioacidolysis yield. The similarity in the activities of P. sanguineus and P. brumalis in modifying the functional groups of the technical lignin were observed, the results suggest that the lignin has undergone structural changes, or at least changes in its composition, and pave the route for the utilization of filamentous fungi to functionalize technical lignins and produce the enzymes of interest for biorefinery applications.

Inhibition of Phenolics Uptake by Ligninolytic Fungal Cells and Its Potential as a Tool for the Production of Lignin-Derived Aromatic Building Blocks

Lignin is the principal natural source of phenolics but its structural complexity and variability make it difficult to valorize through chemical depolymerization approaches. White rots are one of the rare groups of organisms that are able to degrade lignin in ecosystems. This biodegradation starts through extracellular enzymes producing oxidizing agents to depolymerize lignin and continue with the uptake of the generated oligomers by fungal cells for further degradation. Phanerochaete chrysosporium is one of the most studied species for the elucidation of these biodegradation mechanisms. Although the extracellular depolymerization step appears interesting for phenolics production from lignin, the uptake and intracellular degradation of oligomers occurring in the course of the depolymerization limits its potential. In this study, we aimed at inhibiting the phenolics uptake mechanism through metabolic inhibitors to favor extracellular oligomers accumulation without preventing the ligninases production that is necessary for extracellular depolymerization. The use of sodium azide confirmed that an active transportation phenomenon is involved in the phenolics uptake in P. chrysosporium. A protocol based on carbonyl cyanide m-chlorophenyl hydrazone enabled reaching 85% inhibition for vanillin uptake. This protocol was shown not to inhibit, but on the contrary, to stimulate the depolymerization of both dehydrogenation polymers (DHPs) and industrial purified lignins.

Rational Design of Mechanism-Based Inhibitors and Activity-Based Probes for the Identification of Retaining α-l-Arabinofuranosidases

Identifying and characterizing the enzymes responsible for an observed activity within a complex eukaryotic catabolic system remains one of the most significant challenges in the study of biomass-degrading systems. The debranching of both complex hemicellulosic and pectinaceous polysaccharides requires the production of α-l-arabinofuranosidases among a wide variety of coexpressed carbohydrate-active enzymes. To selectively detect and identify α-l-arabinofuranosidases produced by fungi grown on complex biomass, potential covalent inhibitors and probes which mimic α-l-arabinofuranosides were sought. The conformational free energy landscapes of free α-l-arabinofuranose and several rationally designed covalent α-l-arabinofuranosidase inhibitors were analyzed. A synthetic route to these inhibitors was subsequently developed based on a key Wittig–Still rearrangement. Through a combination of kinetic measurements, intact mass spectrometry, and structural experiments, the designed inhibitors were shown to efficiently label the catalytic nucleophiles of retaining GH51 and GH54 α-l-arabinofuranosidases. Activity-based probes elaborated from an inhibitor with an aziridine warhead were applied to the identification and characterization of α-l-arabinofuranosidases within the secretome of A. niger grown on arabinan. This method was extended to the detection and identification of α-l-arabinofuranosidases produced by eight biomass-degrading basidiomycete fungi grown on complex biomass. The broad applicability of the cyclophellitol-derived activity-based probes and inhibitors presented here make them a valuable new tool in the characterization of complex eukaryotic carbohydrate-degrading systems and in the high-throughput discovery of α-l-arabinofuranosidases.

Developments and opportunities in fungal strain engineering for the production of novel enzymes and enzyme cocktails for plant biomass degradation

Fungal strain engineering is commonly used in many areas of biotechnology, including the production of plant biomass degrading enzymes. Its aim varies from the production of specific enzymes to overall increased enzyme production levels and modification of the composition of the enzyme set that is produced by the fungus. Strain engineering involves a diverse range of methodologies, including classical mutagenesis, genetic engineering and genome editing. In this review, the main approaches for strain engineering of filamentous fungi in the field of plant biomass degradation will be discussed, including recent and not yet implemented methods, such as CRISPR/Cas9 genome editing and adaptive evolution.

Integrative visual omics of the white-rot fungus Polyporus brumalis exposes the biotechnological potential of its oxidative enzymes for delignifying raw plant biomass

BACKGROUND

Plant biomass conversion for green chemistry and bio-energy is a current challenge for a modern sustainable bioeconomy. The complex polyaromatic lignin polymers in raw biomass feedstocks (i.e., agriculture and forestry by-products) are major obstacles for biomass conversions. White-rot fungi are wood decayers able to degrade all polymers from lignocellulosic biomass including cellulose, hemicelluloses, and lignin. The white-rot fungus Polyporus brumalis efficiently breaks down lignin and is regarded as having a high potential for the initial treatment of plant biomass in its conversion to bio-energy. Here, we describe the extraordinary ability of P. brumalis for lignin degradation using its enzymatic arsenal to break down wheat straw, a lignocellulosic substrate that is considered as a biomass feedstock worldwide.

RESULTS

We performed integrative multi-omics analyses by combining data from the fungal genome, transcriptomes, and secretomes. We found that the fungus possessed an unexpectedly large set of genes coding for Class II peroxidases involved in lignin degradation (19 genes) and GMC oxidoreductases/dehydrogenases involved in generating the hydrogen peroxide required for lignin peroxidase activity and promoting redox cycling of the fungal enzymes involved in oxidative cleavage of lignocellulose polymers (36 genes). The examination of interrelated multi-omics patterns revealed that eleven Class II Peroxidases were secreted by the fungus during fermentation and eight of them where tightly co-regulated with redox cycling enzymatic partners.

CONCLUSION

As a peculiar feature of P. brumalis, we observed gene family extension, up-regulation and secretion of an abundant set of versatile peroxidases and manganese peroxidases, compared with other Polyporales species. The orchestrated secretion of an abundant set of these delignifying enzymes and redox cycling enzymatic partners could contribute to the delignification capabilities of the fungus. Our findings highlight the diversity of wood decay mechanisms present in Polyporales and the potentiality of further exploring this taxonomic order for enzymatic functions of biotechnological interest.

Solid-state fermentation of oil palm frond petiole for lignin peroxidase and xylanase-rich cocktail production

In current practice, oil palm frond leaflets and stems are re-used for soil nutrient recycling, while the petioles are typically burned. Frond petioles have high commercialization value, attributed to high lignocellulose fiber content and abundant of juice containing free reducing sugars. Pressed petiole fiber is the subject of interest in this study for the production of lignocellulolytic enzyme. The initial characterization showed the combination of 0.125 mm frond particle size and 60% moisture content provided a surface area of 42.3 m²/g, porosity of 12.8%, and density of 1.2 g/cm³, which facilitated fungal solid-state fermentation. Among the several species of Aspergillus and Trichoderma tested, Aspergillus awamori MMS4 yielded the highest xylanase (109 IU/g) and cellulase (12 IU/g), while Trichoderma virens UKM1 yielded the highest lignin peroxidase (222 IU/g). Crude enzyme cocktail also contained various sugar residues, mainly glucose and xylose (0.1-0.4 g/L), from the hydrolysis of cellulose and hemicellulose. FT-IR analysis of the fermented petioles observed reduction in cellulose crystallinity (I_900/1098), cellulose-lignin (I_900/1511), and lignin-hemicellulose (I_1511/1738) linkages. The study demonstrated successful bioconversion of chemically untreated frond petioles into lignin peroxidase and xylanase-rich enzyme cocktail under SSF condition.

Evaluation of Screened Lignin-degrading Fungi for the Biological Pretreatment of Corn Stover

The biological pretreatment of lignocellulosic biomass is a low-cost and eco-friendly method for facilitating enzymatic hydrolysis. In this study, strains with lignin depletion capability were screened using a high-throughput screening method. Sixty-three strains were screened out and Myrothecium verrucaria secreted three lignin-degrading enzymes simultaneously during the bio-pretreatment process. The activity levels of laccase, lignin peroxidase and manganese peroxidase were 6.61, 0.78 and 1.31 U g⁻¹ dry biomass. The content of lignin in corn stover decreased by 42.30% after bio-pretreatment, and the conversion rate increased by 123.84% during the subsequent saccharification process in comparison with the untreated corn stover. Furthermore, the effects of bio-pretreatment on the structure of corn stover were presented using a scanning electron microscope (SEM), Brunauer-Emmet-Teller (BET), X-ray diffractometer (XRD) and Fourier transform infrared spectroscopy (FTIR). The results showed that M.V. is a promising lignin-degrading fungus. This research demonstrated an efficient pretreatment approach for enhancing the enzymatic saccharification of corn stover.

Biological wheat straw valorization: Multicriteria optimization of Polyporus brumalis pretreatment in packed bed bioreactor

The purpose of this work was to optimize the pretreatment process of wheat straw by Polyporus brumalis_BRFM985 in order to improve carbohydrate accessibility for more efficient bioconversion. Indeed, there is growing demands to develop sustainable routes for lignocellulosic feedstocks valorization into value-added products in energy, chemicals, materials, and animal feed fields. To be achieved, implementation of cheap and ecofriendly biomass pretreatment processes is necessary. In this frame, white rot basidiomycetes, well known for their ability to degrade lignin efficiently and selectively, are of great interest. The pretreatment of wheat straw by Polyporus brumalis_BRFM985 was performed in packed bed bioreactor and optimized using response surface methodology. The four pretreatment parameters optimized were metals addition (Cu, Mn, and Fe), time of culture, initial water content, and temperature. Multicriteria optimization highlighted that wheat straw pretreatment by Polyporus brumalis_BRFM985 in the presence of metals with high initial water content of 3.6 g H2 O/g at 27°C for 15-16 days led to an improvement of carbohydrate accessibility with minimal matter loss.

Benefits and perspectives on the use of biofuels

The current primary obstacle to biofuels is the current low price of fossil fuels, and the primary incentive to 2G biofuels is the growing world population and need to increase food suplies. Both of these will be increasingly subject to political, regulatory and legislative changes that will be positive for 2G biofuels.

Effect of biodegradation on thermogravimetric and chemical characteristics of hardwood and softwood by brown-rot fungus

The thermogravimetric and chemical characterization of hardwood Eucalyptus urophylla (Ep) and softwood Pinus massoniana (Mp) pretreated by brown-rot fungus Gloeophyllum trabeum were investigated. The results indicated that the brown-rot fungus pretreatment can optimize the thermal decomposition and decrease the initiation temperatures (8-11°C lower) of both the Ep and Mp pyrolysis. The mean activation energy values of the bio-treated samples were 29.7kJ/mol (for Ep) and 42.3kJ/mol (for Mp) lower than that of the un-treated samples at the conversion rate from 0.1 to 0.7 based on Flynn-Wall-Ozawa (FWO) method. After the bio-pretreatment, the required temperatures were lower (4-7°C) for the pyrolysis rates of hemicellulose and cellulose in Mp reaching maximum and termination. However, the situation was just the opposite for Ep. The variations in chemical properties of hydrogen bonding, as well as the relative changes in lignin/carbohydrate composition of both wood species were also examined.