Trace DNA from insect skins: a comparison of five extraction protocols and direct PCR on chironomid pupal exuviae

Pupal Exuviae of Culex Pipiens L. (Diptera: Culicidae) Can be Utilised as a Non-Invasive Method of Biotype Differentiation

BACKGROUND

Culex pipiens L. is a principal vector of zoonotic arboviruses in Europe, acting in both an amplification role in enzootic transmission between avian hosts and as a bridge vector between avian hosts and mammals. The species consists of two forms which are indistinguishable using morphological methods but possess varying ecological and physiological traits that influence their vector capacity. In this study we validate methods that can be used to extract trace DNA from single pupal exuviae of Cx. pipiens for use in molecular speciation of samples. These DNA extraction methods are compared using measurement of the total yield and successful identification using a real-time polymerase chain reaction (PCR) assay.

RESULTS

Genomic DNA was initially extracted from colony-derived individuals using an ethanol precipitation method, two commercially available DNA extraction kits: DNeasy® Blood & Tissue Kit (Qiagen, UK) and Wizard® SV Genomic DNA Purification System (Promega, UK) and a direct real-time PCR method. Time elapsed between eclosion and processing of pupae significantly influenced Cx. pipiens form identification as nucleic acid concentration and PCR amplification success decreased with increased time elapsed. Real-time PCR amplification success, however, was not shown to vary significantly between the three extraction methods, with all methods successfully identifying all samples, but the direct real-time PCR method achieved a lesser amplification success rate of 70% (n = 20 for each treatment). More variable results were produced when field-derived exuviae were used, with no significant difference in real-time PCR amplification success found across the four methods and a lower overall rate of successful identification of 55-80%.

CONCLUSIONS

This study shows that both colony and field derived Cx. pipiens pupal exuviae can be a useful non-invasive source of trace DNA permitting accurate biotype differentiation for at least twenty-four hours post-eclosion. The significance and utility of this technique in ecological and behavioural studies of Cx. pipiens is discussed and recommendations made for use according to experimental scenario.

An efficient and cost-effective method for disrupting genes in RAW264.7 macrophages using CRISPR-Cas9

The clustered regularly interspaced short palindromic repeats (CRISPR) and CRISPR-associated protein 9 (Cas9) are widely used for genome editing in cultured cell lines. However, the implementation of genome editing is still challenging due to the complex and often costly multi-step process associated with this technique. Moreover, the efficiency of genome editing varies across cell types, often limiting utility. Herein, we describe pCRISPR-EASY, a vector for simplified cloning of single guide RNAs (sgRNAs) and its simultaneous introduction with CRISPR-Cas9 into cultured cells using a non-viral delivery system. We outline a comprehensive, step-by-step protocol for genome editing in RAW264.7 macrophages, a mouse macrophage cell line widely used in biomedical research for which genome editing using CRISPR-Cas9 has been restricted to lentiviral or expensive commercial reagents. This provides an economical, highly efficient and reliable method for genome editing that can easily be adapted for use in other systems.

Scrutinising an inscrutable bark-nesting ant: Exploring cryptic diversity in the Rhopalomastix javana (Hymenoptera: Formicidae) complex using DNA barcodes, genome-wide MIG-seq and geometric morphometrics

Overlooking cryptic species diversity has grave implications on assessments of climate change impacts on biodiversity, ecosystems and organismal populations. Discriminating between cryptic species has long been challenging even for seasoned taxonomists, as interspecies morphological differences are often indiscernible by visual observation. Multi-disciplinary methods involving genetic analyses in conjunction with quantitative morphological data, should therefore be used to investigate boundaries between cryptic species. We adopted an integrated approach combining analyses of mitochondrial COI barcodes, a genome-wide dataset obtained via multiplexed inter-simple sequence repeats (ISSRs) genotyping by sequencing (MIG-seq), and geometric morphometrics to investigate species divergences in the inscrutable Rhopalomastix javana species complex. Objective clustering of COI suggested five putative molecular species units divergent from each other by thresholds within 4.2-10.6% uncorrected pairwise distance. Phylogenetic analyses based on concatenated MIG-seq data also recovered and strongly supported the monophyly of five major lineages in agreement with COI clusters. Co-ancestry analyses based on MIG-seq data using fineRADstructure resolved variable patterns of admixture linked to geography, and potential genetic drift within some putative species. Geometric morphometric analyses of specimen images further detected statistically significant differences in at least one of three anatomical aspects (Head, Meso, Profile) between all pairs of putative species. Head shape (full-face view) was determined to be the most informative character for species diagnosis, with relatively high classification accuracy. Thin-plate spline deformation grids highlighted areas of high variation between species in each shape for deeper taxonomic scrutiny. The presence of species from multiple distinct lineages existing in near-sympatry firmly demonstrates that R. javana comprises more than one closely-related species, but exact species boundaries are difficult to ascertain. Differences in elevation and its associated abiotic effects on ant adaptations and reproductive phenology may contribute to restricting gene flow and maintaining species boundaries between sympatric populations of the R. javana complex. We further assess the advantages and limitations of geometric morphometrics as a taxonomic tool. Despite its drawbacks, our combined approach has helped draw important insights on cryptic diversity in R. javana, and also identified gaps of knowledge that await address. Results from this study will inform and prime future in-depth taxonomic investigation on the R. javana complex, including formal descriptions and establishment of the five putative species.

CRISPR Assays for Disease Diagnosis: Progress to and Barriers Remaining for Clinical Applications

Numerous groups have employed the special properties of CRISPR/Cas systems to develop platforms that have broad potential applications for sensitive and specific detection of nucleic acid (NA) targets. However, few of these approaches have progressed to commercial or clinical applications. This review summarizes the properties of known CRISPR/Cas systems and their applications, challenges associated with the development of such assays, and opportunities to improve their performance or address unmet assay needs using nano-/micro-technology platforms. These include rapid and efficient sample preparation, integrated single-tube, amplification-free, quantifiable, multiplex, and non-NA assays. Finally, this review discusses the current outlook for such assays, including remaining barriers for clinical or point-of-care applications and their commercial development.

A Rapid and Cost-Effective Identification of Invertebrate Pests at the Borders Using MinION Sequencing of DNA Barcodes

The rapid and accurate identification of invertebrate pests detected at the border is a challenging task. Current diagnostic methods used at the borders are mainly based on time consuming visual and microscopic examinations. Here, we demonstrate a rapid in-house workflow for DNA extraction, PCR amplification of the barcode region of the mitochondrial cytochrome oxidase subunit I (COI) gene and Oxford Nanopore Technologies (ONT) MinION sequencing of amplified products multiplexed after barcoding on ONT Flongle flow cells. A side-by-side comparison was conducted of DNA barcode sequencing-based identification and morphological identification of both large (>0.5 mm in length) and small (<0.5 mm in length) invertebrate specimens intercepted at the Australian border. DNA barcode sequencing results supported the morphological identification in most cases and enabled immature stages of invertebrates and their eggs to be identified more confidently. Results also showed that sequencing the COI barcode region using the ONT rapid sequencing principle is a cost-effective and field-adaptable approach for the rapid and accurate identification of invertebrate pests. Overall, the results suggest that MinION sequencing of DNA barcodes offers a complementary tool to the existing morphological diagnostic approaches and provides rapid, accurate, reliable and defendable evidence for identifying invertebrate pests at the border.

Efficient PCR Amplification Protocol of Nuclear Microsatellites for Exuviae-Derived DNA of Cicada, Yezoterpnosia nigricosta

Although insect exuviae-based genetics is challenging, it can be a valuable method for obtaining reliable DNA resources by non-invasive sampling. This approach is especially effective when the target species is endangered/endemic or when sampling the adult is difficult. One example is cicadas, which during molt leave their exoskeletons on tree trunks, making them easily collectable. While cicada exuviae-derived DNA has previously been employed for mitochondrial DNA sequencing, this study aimed to develop a reliable method for the PCR amplification of nuclear microsatellite loci from cicada exuviae derived DNA for application in molecular ecology, conservation and population genetics. Five different PCR amplification protocols were performed, and the fragment patterns compared with those obtained using DNA extracted from adult individuals. Moreover, the relationship between the freshness of the exuviae and genotyping success was evaluated. TaKaRa LA Taq provided the best performance in the PCR amplification of DNA isolated from cicada exuviae and the electropherogram showed a clear fragment pattern that was equivalent to that obtained from the DNA extracted from the adult individual. This result suggests that cicada exuviae-derived DNA can be amplified by PCR and that multiple independent loci of nuclear DNA microsatellite markers can be easily genotyped. This study demonstrates that fresh cicada exuviae provide high quality DNA, which can be used for microsatellite genotyping. The methods developed in this study are applicable not only for cicada but other insect species for which exuviae are available. Thus, this study can make a significant contribution to insect sciences.

Body Remains Left by Bird Predators as a Reliable Source for Population Genetic Studies in the Great Capricorn Beetle Cerambyx cerdo, a Veteran Oak Specialist

Obtaining biological material for DNA extraction is often challenging in organisms of conservation interest. Non-invasive sampling (i.e., sampling without injuring or disturbing an animal) is preferred as it carries no risk to the population's survival. Here, we tested the possibility of using the body remains left by bird predators for microsatellite genotyping in Cerambyx cerdo, a veteran oak specialist. We compared results obtained from such potentially degraded samples with samples of fresh beetle tarsi (i.e., invasive and destructive but non-lethal samples). Using 10 SSR loci, we genotyped 28 fresh, and 28 remains samples. The analysis indicated that PCR amplification efficiency was not influenced by sample type but allele length and individual heterozygosity. Allele frequencies were perfectly correlated for both sample types (R² = 0.94). Additionally, null allele frequencies and genotyping failure rates were not significantly different from zero. Although the point estimates of individual inbreeding rates (f_i) were higher in remains than fresh samples (medians 0.08 vs. 0.02, respectively), both groups were not significantly different from each other and zero. Our study demonstrated that non-invasive remains samples could provide satisfactory data for population-genetic studies. However, we highlight the problem of biased inbreeding estimates, which may result from samples affected by allelic dropout.

Takeaways from Mobile DNA Barcoding with BentoLab and MinION

Since the release of the MinION sequencer in 2014, it has been applied to great effect in the remotest and harshest of environments, and even in space. One of the most common applications of MinION is for nanopore-based DNA barcoding in situ for species identification and discovery, yet the existing sample capability is limited (n ≤ 10). Here, we assembled a portable sequencing setup comprising the BentoLab and MinION and developed a workflow capable of processing 32 samples simultaneously. We demonstrated this enhanced capability out at sea, where we collected samples and barcoded them onboard a dive vessel moored off Sisters' Islands Marine Park, Singapore. In under 9 h, we generated 105 MinION barcodes, of which 19 belonged to fresh metazoans processed immediately after collection. Our setup is thus viable and would greatly fortify existing portable DNA barcoding capabilities. We also tested the performance of the newly released R10.3 nanopore flow cell for DNA barcoding, and showed that the barcodes generated were ~99.9% accurate when compared to Illumina references. A total of 80% of the R10.3 nanopore barcodes also had zero base ambiguities, compared to 50-60% for R9.4.1, suggesting an improved homopolymer resolution and making the use of R10.3 highly recommended.

Maritime trap-jaw ants (Hymenoptera, Formicidae, Ponerinae) of the Indo-Australian region - redescription of Odontomachus malignus Smith and description of a related new species from Singapore, including first descriptions of males

The maritime trap-jaw ant Odontomachusmalignus Smith, 1859 is thought to be widespread throughout islands in the Indo-Pacific and parts of the Oriental realm. Because of its unique nesting preference for harsh littoral habitat and distinct morphology, O.malignus has usually been assumed to consist of only one species. We, however, describe a new species similar to O.malignus found in the mangroves of Singapore, Southeast Asia – Odontomachuslitoralissp. nov. We find strong evidence of both species existing in (near) sympatry, and also distinct morphological differences between O.malignus and the new species. Additional complementary DNA evidence in the form of COI barcodes (313 bp) supporting putative species identification and delimitation is provided. Defining morphological characteristics for the O.malignus species group (nested within the larger O.infandus clade) are given in detail for the first time. The worker and queen castes of the new species are described; a redescription of the worker caste of O.malignus, based on specimens from Singapore and the Philippines in addition to the holotype, is also given. The males of both species are also described for the first time, including male genitalia. A preliminary key to most known species of the O.infandus group based on the worker caste is provided.

LMP1 gene detection using a capped gold nanowire array surface plasmon resonance sensor in a microfluidic chip

A new detection device by using SPR nanowire array chip and a microfluidics system was developed. A simple, low-cost and reproducible SPR nanowire chip with a visible light source displayed real-time detection capability.

A new cost-effective and fast direct PCR protocol for insects based on PBS buffer

Insect DNA barcoding is a species identification technique used in biodiversity assessment and ecological studies. However, DNA extraction can result in the loss of up to 70% of DNA. Recent research has reported that direct PCR can overcome this issue. However, the success rates could still be improved, and tissues used for direct PCR could not be reused for further genetic studies. Here, we developed a direct PCR workflow that incorporates a 2-min sample preparation in PBS-buffer step for fast and effective universal insect species identification. The developed protocol achieved 100% success rates for amplification in six orders: Mantodea, Phasmatodea, Neuroptera, Odonata, Blattodea and Orthoptera. High and moderate success rates were obtained for five other species: Lepidoptera (97.3%), Coleoptera (93.8%), Diptera (90.5%), Hemiptera (81.8%) and Hymenoptera (75.0%). High-quality sequencing data were also obtained from these amplifiable products, allowing confidence in species identification. The method was sensitive down to 1/4th of a 1-mm fragment of leg or body and its success rates with oven-dried, ethanol-preserved, food, bat guano and museum specimens were 100%, 98.6%, 90.0%, 84.0% and 30.0%, respectively. In addition, the pre-PCR solution (PBS with insect tissues) could be used for further DNA extraction if needed. The workflow will be beneficial in the fields of insect taxonomy and ecological studies due to its low cost, simplicity and applicability to highly degraded specimens.

Evaluating next-generation sequencing (NGS) methods for routine monitoring of wild bees: Metabarcoding, mitogenomics or NGS barcoding

Implementing cost‐effective monitoring programs for wild bees remains challenging due to the high costs of sampling and specimen identification. To reduce costs, next‐generation sequencing (NGS)‐based methods have lately been suggested as alternatives to morphology‐based identifications. To provide a comprehensive presentation of the advantages and weaknesses of different NGS‐based identification methods, we assessed three of the most promising ones, namely metabarcoding, mitogenomics and NGS barcoding. Using a regular monitoring data set (723 specimens identified using morphology), we found that NGS barcoding performed best for both species presence/absence and abundance data, producing only few false positives (3.4%) and no false negatives. In contrast, the proportion of false positives and false negatives was higher using metabarcoding and mitogenomics. Although strong correlations were found between biomass and read numbers, abundance estimates significantly skewed the communities' composition in these two techniques. NGS barcoding recovered the same ecological patterns as morphology. Ecological conclusions based on metabarcoding and mitogenomics were similar to those based on morphology when using presence/absence data, but different when using abundance data. In terms of workload and cost, we show that metabarcoding and NGS barcoding can compete with morphology, but not mitogenomics which was consistently more expensive. Based on these results, we advocate that NGS barcoding is currently the seemliest NGS method for monitoring of wild bees. Furthermore, this method has the advantage of potentially linking DNA sequences with preserved voucher specimens, which enable morphological re‐examination and will thus produce verifiable records which can be fed into faunistic databases.

Extracting the invisible: obtaining high quality DNA is a challenging task in small arthropods

BACKGROUND

The application of an appropriate extraction method is a relevant factor for the success of all molecular studies.

METHODS

Seven different DNA extraction methods suitable for high-throughput DNA sequencing with very small arthropods were compared by applying nine different protocols: three silica gel based spin methods, two cetyltrimethyl ammonium bromide (CTAB) based ones (one with an additional silica membrane), a protein precipitation method and a method based on a chelating resin (applying different protocols). The quantity (concentration) and quality (degradation, contamination, polymerase chain reaction (PCR) and sequencing success) of the extracted DNA as well as the costs, preparation times, user friendliness, and required supplies were compared across these methods. To assess the DNA quantity, two different DNA concentration measurements were applied. Additionally, the effect of varying amounts of starting material (different body sizes), variable lysis temperatures and mixing during DNA extraction was evaluated.

RESULTS

Although low DNA concentrations were measured for all methods, the results showed that-with the exception of two methods-the PCR success was 100%. However, other parameters show vast differences. The time taken to perform DNA extraction varied from 20 min to 2.5 h (Chelex vs. CTAB) and the costs from 0.02 to 3.46 € (Chelex vs. QIAamp kit) per sample. High quality genomic DNA was only gained from four methods. Results of DNA quantity measurements further indicated that some devices cannot deal with small amounts of DNA and show variant results.

DISCUSSION

In conclusion, using Chelex (chelating resin) turned out as a rapid, low-cost method which can provide high quality DNA for different kinds of molecular investigations.

Optimization of sand fly embryo microinjection for gene editing by CRISPR/Cas9

Background

Clustered Regularly Interspaced Short Palindromic Repeats (CRISPR)/Cas9 technology has rapidly emerged as a very effective tool for gene editing. Although great advances on gene editing in the medical entomology field have arisen, no attempts of gene editing have been reported in sand flies, the vectors of Leishmaniasis.

Methodology/Principal findings

Here, we described a detailed protocol for sand fly embryo microinjection taking into consideration the sand fly life cycle, and manipulation and oviposition requirements of this non-model organism. Following our microinjection protocol, a hatching rate of injected embryos of 11.90%-14.22% was achieved, a rate consistent with other non-model organism dipterans such as mosquitoes. Essential factors for the adaptation of CRISPR/Cas9 technology to the sand fly field were addressed including the selection of a target gene and the design and production of sgRNA. An in vitro cleavage assay was optimized to test the activity of each sgRNA and a protocol for Streptococcus pyogenes Cas9 (spCas9) protein expression and purification was described. Relevant considerations for a successful gene editing in the sand fly such as specifics of embryology and double-stranded break DNA repair mechanisms were discussed.

Conclusion and significance

The step-by-step methodology reported in this article will be of significant use for setting up a sand fly embryo microinjection station for the incorporation of CRISPR/Cas9 technology in the sand fly field. Gene editing strategies used in mosquitoes and other model insects have been adapted to work with sand flies, providing the tools and relevant information for adapting gene editing techniques to the vectors of Leishmaniasis. Gene editing in sand flies will provide essential information on the biology of these vectors of medical and veterinary relevance and will rise a better understanding of vector-parasite-host interactions.

The CRISPR/Cas9 system, based on the adaptive immune system in bacteria and archaea against viral infections, has been adapted and has rapidly emerged as a very effective genetic engineering tool in many organisms. Although great advances on gene editing in the medical entomology field have arisen, no attempts have been reported in sand flies, the vectors of Leishmania spp. Leishmaniasis is one of the most neglected parasitic diseases with twelve million people affected worldwide. Despite their importance as disease vectors, sand fly genetics and molecular studies are limited when compared to other insects. In this article, gene editing strategies used in mosquitoes and other model insects have been adapted to work with sand flies, providing the tools and relevant information for adapting embryo microinjection techniques to sand flies, an essential step in a successful gene editing experiment. We believe gene editing in sand flies will provide essential information of medical and veterinary relevance on the biology of these vectors, and will further a better understanding of vector-parasite-host interactions.

Sorting specimen-rich invertebrate samples with cost-effective NGS barcodes: Validating a reverse workflow for specimen processing

Biologists frequently sort specimen-rich samples to species. This process is daunting when based on morphology, and disadvantageous if performed using molecular methods that destroy vouchers (e.g., metabarcoding). An alternative is barcoding every specimen in a bulk sample and then presorting the specimens using DNA barcodes, thus mitigating downstream morphological work on presorted units. Such a "reverse workflow" is too expensive using Sanger sequencing, but we here demonstrate that is feasible with an next-generation sequencing (NGS) barcoding pipeline that allows for cost-effective high-throughput generation of short specimen-specific barcodes (313 bp of COI; laboratory cost <$0.50 per specimen) through next-generation sequencing of tagged amplicons. We applied our approach to a large sample of tropical ants, obtaining barcodes for 3,290 of 4,032 specimens (82%). NGS barcodes and their corresponding specimens were then sorted into molecular operational taxonomic units (mOTUs) based on objective clustering and Automated Barcode Gap Discovery (ABGD). High diversity of 88-90 mOTUs (4% clustering) was found and morphologically validated based on preserved vouchers. The mOTUs were overwhelmingly in agreement with morphospecies (match ratio 0.95 at 4% clustering). Because of lack of coverage in existing barcode databases, only 18 could be accurately identified to named species, but our study yielded new barcodes for 48 species, including 28 that are potentially new to science. With its low cost and technical simplicity, the NGS barcoding pipeline can be implemented by a large range of laboratories. It accelerates invertebrate species discovery, facilitates downstream taxonomic work, helps with building comprehensive barcode databases and yields precise abundance information.

Efficient isolation method for high-quality genomic DNA from cicada exuviae

In recent years, animal ethics issues have led researchers to explore nondestructive methods to access materials for genetic studies. Cicada exuviae are among those materials because they are cast skins that individuals left after molt and are easily collected. In this study, we aim to identify the most efficient extraction method to obtain high quantity and quality of DNA from cicada exuviae. We compared relative DNA yield and purity of six extraction protocols, including both manual protocols and available commercial kits, extracting from four different exoskeleton parts. Furthermore, amplification and sequencing of genomic DNA were evaluated in terms of availability of sequencing sequence at the expected genomic size. Both the choice of protocol and exuvia part significantly affected DNA yield and purity. Only samples that were extracted using the PowerSoil DNA Isolation kit generated gel bands of expected size as well as successful sequencing results. The failed attempts to extract DNA using other protocols could be partially explained by a low DNA yield from cicada exuviae and partly by contamination with humic acids that exist in the soil where cicada nymphs reside before emergence, as shown by spectroscopic measurements. Genomic DNA extracted from cicada exuviae could provide valuable information for species identification, allowing the investigation of genetic diversity across consecutive broods, or spatiotemporal variation among various populations. Consequently, we hope to provide a simple method to acquire pure genomic DNA applicable for multiple research purposes.