The marginal gaps of lithium disilicate crowns constructed by different scanner and milling unit combinations

The influence of different cement spaces on the marginal gap of lithium disilicate crowns constructed by two scanner and milling unit combinations

BACKGROUND

This study compared the marginal gaps of CAD/CAM lithium disilicate (LDS) crowns constructed using a contemporary and older scanner/milling unit combination at three different cement spaces.

METHODS

Twenty-four undergraduate students prepared a Columbia model lower left first molar for an LDS crown in a simulated environment. From each crown preparation, one LDS crown was constructed using an E4D scanner/E4D milling unit (E4DS/E4DM) and TRIOS 3 scanner/Sirona inLab MC X5 milling unit (TRIO/MCX5) at cement space settings of 50, 100 and 200 μm. Each LDS crown was positioned onto the original crown preparation, and then a stereomicroscope was used to make three vertical marginal gap measurements at four locations (mid-buccal, mid-lingual, mid-mesial and mid-distal). The mean marginal gap (MMG) was calculated for each crown and each individual tooth surface.

RESULTS

The MMGs of CAD/CAM LDS crowns constructed by TRIO/MCX5 were 72.31 at 50, 63.73 at 100 μm and 46.23 μm at 200 μm, which were smaller than E4DS/E4DM at each cement space.

CONCLUSIONS

Increasing the cement space decreased the MMG in both scanner/milling unit combinations. The smallest MMG was found using the newer scanner/milling unit at the 200 μm cement space. © 2024 Australian Dental Association.

Surface fractures in pre-crystallized and crystallized zirconia-containing lithium silicate glass-ceramics generated in ultrasonic vibration-assisted machining

Machining-induced surface fractures in ceramic restorations is a long-standing problem in dentistry, affecting the restorations' functionality and reliability. This study approached a novel ultrasonic vibration-assisted machining technique to zirconia-containing lithium silicate glass-ceramics (ZLS) and characterized its induced surface fracture topographies and morphologies to understand the microstructure-property-processing relations. The materials were processed using a digitally controlled ultrasonic milling machine at a harmonic vibration frequency with different amplitudes. Machining-induced surface fracture topographies were measured with a 3D white light optical profilometer using the arithmetic mean, peak and valley, and maximum heights, as well as the kurtosis and skewness height distributions, and the texture aspect ratios. Fracture morphologies were analysed using scanning electron microscopy (SEM). The surface fracture topographies were significantly dependent on the material microstructure, the mechanical properties, and the ultrasonic machining vibration amplitudes. Larger scale fractures with higher arithmetic mean, peak and valley heights, and kurtosis and skewness height distributions were induced in higher brittleness indexed pre-crystallized ZLS than lower indexed crystallized ZLS by conventional machining. Conchoidal fractures occurred in pre-crystallized ZLS while microcracks were found in crystallized state although brittle fractures mixed with localized ductile flow deformations dominated all machined ZLS surfaces. Ultrasonic machining at an ideal vibration amplitude resulted in more ductile removal, reducing fractured-induced peaks and valleys for both materials than conventional processing. This research demonstrates the microstructure-property-processing interdependence for ZLS materials and the novel machining technique to be superior to current processing, reducing fractures in the materials and potentially advancing dental CAD/CAM techniques.

Comparing the accuracy of distinct scanning systems and their impact on marginal/internal adaptation of tooth-supported indirect restorations. A scoping review

OBJECTIVE

To summarize the existing scientific evidence on the effect of distinct intraoral (IOS) and extraoral (EOS) scanners in terms of their accuracy for image acquisition and the marginal/internal adaptation of indirect restorations.

METHODS

The protocol of this scoping review is available online (https://osf.io/cwua7/). A structured search, with no date restriction, was performed in LILACS, MEDLINE via Pubmed, EMBASE, Web of Science, and Scopus, for articles written in English. The inclusion criteria were studies that considered at least two scanners, regardless of method (intra or extraoral), for the production of tooth-supported restorations. Two independent and blinded researchers screened the studies, collected and analyzed the data descriptively.

RESULTS

103 studies were included (55 on marginal/internal adaptation, 33 on accuracy, 5 on both outcomes, and 10 reviews). Most of them, shown clinically acceptable adaptation (<120 μm). Factors commonly related to the performance of scanners are: use of anti-reflection powders, method of image acquisition, and restoration/tooth characteristics. The need of anti-reflection powders was controversial. Different scanning principles seems to result on similar performance; IOS that combine them could be promising. The most explored systems were Omnicam - IOS, and inEos X5 - EOS, which showed similar performance on marginal/internal adaptation. Scarce studies explored the performance of EOS systems, especially in terms of accuracy. Different restoration designs as single-unit seemed not to modify the performance of scanners. Limited information is available regarding the planned cement space, restorative material and design (multi-unit restorations), as also techniques to measure adaptation.

CONCLUSIONS

Digital scanners are valid approaches to obtain accurate impressions resulting in clinically acceptable restorations. Systems that uses combined principles of image acquisition seems promising for optimal performance. Based on high discrepancy, the quality of evaluated evidence is low, and well-designed studies are still encouraged, especially considering validated IOS/EOS as a control comparison condition.

An 8-year retrospective study of fixed prosthodontics clinical unit completions in a postgraduate prosthodontics program

Background and Aims

The range of aesthetic fixed prosthodontics materials utilizing digital manufacturing techniques has expanded in recent years ostensibly replacing traditional laboratory techniques and materials. This retrospective study conducted over eight consecutive years aimed to analyze the types of laboratory fabricated fixed prosthodontics clinical units completed in a postgraduate prosthodontics specialist training program and determine meaningful trends.

Methods

The logbooks of eight postgraduate prosthodontics completions from 2014 to 2021 were reviewed and the different types of laboratory fabricated fixed prosthodontics units and total number of fixed prosthodontics units completed were recorded. The data was categorized and presented in tabulated and chart form using Microsoft Excel software (version 2016). Paired t-tests and Mann-Kendall trend tests were performed to analyze for statistical significance between the different restoration types across the program completions.

Results

Porcelain bonded to metal (PBM) crowns represented 42.05% of all fixed prosthodontics units completed over all study years followed by all-ceramic crowns (ACC) (18.14%) and full gold crowns (FGC) (10.70%). Jointly, PBM, ACC and FGC's encompassed 70.88% of all fixed prosthodontics units. Over the 8-year study period, there were observed trends of reduced use of PBM's, increased use of ACC's, statistically significant reduced use of FGC's (p = 0.035) and a statistically significant difference in the use of complete and partial coverage restorations (p < 0.001).

Conclusion

PBM crowns were the dominant laboratory fabricated fixed prosthodontic clinical unit across postgraduate prosthodontics program completions. The trend in later years indicating ACC as the dominant crown type warrants further investigation.

Fixed prosthodontics clinical unit completions in an undergraduate curriculum: A 10-year retrospective study

INTRODUCTION

Providing undergraduate dental students with a range of clinical experiences in fixed prosthodontics procedures is an important component of dental education. The aim of this retrospective study was to analyse the types of laboratory-fabricated fixed prosthodontics clinical units completed by undergraduate students over 10 consecutive years and determine any significant trends.

MATERIALS AND METHODS

The fixed prosthodontics treatment registers from 2012 to 2021 were reviewed and the different types of completed fixed prosthodontics units and total number of fixed prosthodontics units were recorded for each year. Completed units were categorised according to the type of restoration and expressed in whole numbers and as a percentage of the total number of units completed in each year. The data were presented in table and graph form. Mann-Kendall tests were performed to statistically analyse for trends in the different restoration types.

RESULTS

Throughout all study years, porcelain bonded to metal (PBM) crowns (48.25%, range 35.70%-59.91%) were the most frequently completed fixed prosthodontics unit followed by full gold crowns (FGC) (20.84%, range 14.89%-27.30%) and all-ceramic crowns (ACC) (12.70%, range 3.67%-24.41%). Collectively, PBM, FGC and ACC comprised 81.80% of all completed fixed prosthodontics units. There were observed trends of increased use of all types of all-ceramic containing restorations, all types of all-gold containing restorations, all types of partial coverage restorations and specifically ceramic onlays and gold onlays. There were observed trends of reduced use of cast gold post-cores and all types of bridges.

CONCLUSION

PBM crowns were the mainstay laboratory-fabricated fixed prosthodontic unit completed over 10 years of undergraduate student fixed prosthodontics clinical practice.