Photodynamic therapy: An adjunct to conventional root canal disinfection strategies

In vitro evaluation of antimicrobial photodynamic therapy with photosensitizers and calcium hydroxide on bond strength, chemical composition, and sealing of glass-fiber posts to root dentin

Investigate the impact of antimicrobial photodynamic therapy (aPDT) using different photosensitizers (PSs) such as indocyanine green (IG), curcumin (CC), and methylene blue (MB), with or without intracanal application of calcium hydroxide (CH), on the push-out bond strength of glass-fiber posts (GFPs) to intraradicular dentin, the chemical composition of the root substrate, and the sealing of the adhesive interface across different thirds of intraradicular dentin. A total of 112 bovine teeth underwent biomechanical preparation and were divided into eight experimental groups (n = 14 each): Negative control with deionized water; positive control with deionized water + CH; IG group with indocyanine green and infrared laser; IG + CH group; CC group with curcumin and blue LED; CC + CH group; MB group with methylene blue and red laser; and MB + CH group. The push-out bond strength was measured using a universal testing machine (n = 8), and scanning electron microscopy characterized the fracture patterns. Energy dispersive spectroscopy (n = 3) analyzed the chemical composition of the dentin substrate, while fluorescence confocal microscopy (n = 3) assessed the adhesive interface sealing between the resin cement and root dentin. Data were analyzed using two-way repeated measures ANOVA and the Tukey test for push-out bond strength and chemical composition comparison, with the Kruskal-Wallis and Dunn's tests (α = 0.05) for adhesive interface sealing. Significant bond strength differences were noted across root thirds and experimental groups (P < .05), with the IG + CH group showing the highest cervical bond strength and the IG group the lowest. Apical bond strength was highest in the CC group but lower in the NC and PC groups. Mixed failures predominated, except in the MB + CH group, where adhesive failures prevailed. Elemental composition varied among groups treated with different PSs and CH (P < .05), but interface quality, tag formation, and penetration depth showed no significant differences (P > .05). Laser-activated 500 mg/L CC combined with CH emerged as a clinically relevant option for root canal decontamination before GFPs luting. aPDT with different PSs and root canal depth influenced the push-out bond strength of GFPs and the chemical composition of root dentin. Curcumin-mediated aPDT at 500 mg/L proved effective, enhancing bond strength and sealing while maintaining consistent dentin composition across depths.

Antimicrobial photodynamic therapy effects mediated by methylene blue in surfactant medium as an adjuvant treatment of teeth with apical periodontitis and presence of fistula-Protocol for randomized, controlled, double-blind clinical trial

OBJECTIVE

This study aims to evaluate the efficacy of photodynamic therapy as an adjunct to conventional endodontic treatment in patients with apical periodontitis and fistulas. In this study, a fistula is characterized as a pathological conduit originating from the infected region at the root apex of the tooth, traversing the oral mucosa, and extending to the external surface of the gingiva. This pathological condition frequently complicates the management of endodontic infections, thereby necessitating the evaluation of supplementary therapeutic interventions. The standard treatment for endodontic infections involves thorough disinfection of the root canal system to remove microbial contamination from the canal and surrounding tissues. To potentially augment the efficacy of conventional treatment, aPDT is proposed as a supplementary, non-invasive technique. This innovative technique uses a photosensitizer, which is a light-sensitive dye, in combination with a light source to produce reactive oxygen species. Reactive oxygen species can effectively target and eliminate bacteria in the root canal system, potentially enhancing treatment outcomes.

METHODS

The study will involve 140 teeth with apical periodontitis and fistulas. The teeth will be randomly assigned to one of two treatment groups. Group I will receive only the conventional endodontic treatment, which includes root canal cleaning, shaping, and obturation. Group II will undergo the same conventional endodontic treatment, but with an additional step of aPDT. The aPDT procedure involves applying a photosensitizer to the root canal and irradiating it with light to produce reactive oxygen species. Each group will consist of 70 teeth to ensure adequate statistical power. The primary outcome is fistula resolution, assessed clinically at 15 and 30 days post-treatment. The secondary outcome is the comparison of apical radiolucency from periapical radiographs to evaluate healing and reduction of periapical pathology.

CONCLUSIONS

The study aims to determine if adding aPDT significantly improves the management of apical periodontitis and overall success rates of endodontic treatment. The results will provide insights into the effectiveness of aPDT as an adjunctive treatment and its potential benefits in clinical practice.

The impact of methylene blue photosensitizer, aPDT and a calcium hydroxide-based paste on the physicochemical and mechanical characteristics of root canal dentin and the bonding interface of fiberglass posts

PURPOSE

To investigate the influence of methylene blue (MB)-mediated antimicrobial photodynamic therapy (aPDT) and calcium hydroxide (CH) medication on the mechanical characteristics, degree of conversion (DC), quantification, and volume of gaps at the adhesive interface of glass fiber posts (GFPs) luted to distinct thirds of root canal dentin. Additionally, the microhardness (MH), elastic modulus (Eit), morphology, and chemical structure of the intraradicular dentin were assessed.

MATERIALS AND METHODS

6 experimental groups were formed by sorting 102 bovine incisors. Canals receiving deionized water irrigation as a negative control; canals receiving deionized water irrigation and filled with CH as a positive control; groups treated with CH + MB at 50 and 100 mg/L without irradiation; and groups treated with CH + MB at 50 and 100 mg/L irradiated by red laser for 60 s (660 nm; 100 mW; 6.5 J; 72 J/cm2). MH, Eit, and DC properties were evaluated for both the resin cement layer and root dentin substrate (n = 8). Volume and quantification of gaps at the bonding interface (n = 6), and dentin morphology and chemical content were investigated (n = 3). Data were analyzed using a repeated-measures 2-way ANOVA followed by Tukey post hoc analysis (α = 0.05).

RESULTS

The distinct intraradicular thirds and treatment with MB-mediated aPDT, whether activated or not, in combination with CH, had a significant impact on the mechanical characteristics of the root dentin. This effect was also observed in the MH, Eit, DC, quantification, and volume of gaps at the luting interface (P < .05). In general, a higher concentration of MB, whether activated by a red laser or not, led to lower values in the mechanical properties of the root dentin, as well as in MH, Eit, and DC at the adhesive interface (P < .05). Additionally, these groups exhibited higher values for quantification and volume of gaps at the luting substrate (P < .05). Scanning electron micrographs and energy dispersive X-ray spectra showed qualitative similarity among all groups, except for the negative experimental control group.

CONCLUSIONS

MB-mediated aPDT at 50 mg/L, in combination with CH, demonstrated favorable physico-chemical and mechanical characteristics in intraradicular dentin, along with satisfactory mechanical features and the adhesive interface integrity for GFPs at all intraradicular depths.

CLINICAL SIGNIFICANCE

MB-mediated aPDT at a concentration of 50 mg/L combined to CH medication represents a suitable choice for photosensitization in the context of intracanal disinfection following the biomechanical procedure and prior to luting of intraradicular restorations.

In vitro study on how photodynamic therapy and calcium hydroxide medication influence adhesive interface properties of glass-fiber posts to intraradicular dentin

PURPOSE

This in vitro study evaluated the influence of antimicrobial photodynamic therapy (aPDT), using methylene blue (MB) as photosensitizer (PS) and calcium hydroxide (CH) as intracanal medication on adhesive bond strength, sealing, and integrity of the luting interface of glass-fiber posts to different thirds of endodontically treated root canal dentin.

MATERIAL AND METHODS

102 incisors were sorted into 6 groups: a negative control irrigated with deionized water; a positive control irrigated with deionized water and filled with CH; CH + MB 50 mg/L without laser radiation; CH + MB 100 mg/L without laser radiation; CH + MB 50 mg/L radiated by red laser; and CH + MB 100 mg/L radiated by red laser. Push-out bond strength (n = 8), adhesive interface sealing (n = 3), and volume and quantification of voids (n = 6) were assessed using a universal testing machine, confocal laser scanning microscope, and computerized microtomography, respectively. Scanning electron micrographs were obtained from representative samples to qualify the fracture patterns. Push-out bond strength and adhesive interface integrity data were subjected to 2-way ANOVA for repeated measures followed by Tukey's test (α = 0.05). Adhesive interface sealing was evaluated by the inter-examiner Kappa test and submitted to Kruskal-Wallis and Dunns tests (α = 0.05).

RESULTS

Assessing the apical region, the positive control and MB_100WA + Ca(OH)₂ groups showed lower adhesive bond strength compared to the MB_100A + Ca(OH)₂ group (P < 0.05). The cervical third showed higher bond strength than the apical third for the positive control, MB_50WA + Ca(OH)_2, MB_100WA + Ca(OH)_2, and MB_50A + Ca(OH)₂ groups (P < 0.05). A prevalence of mixed failure was observed in all experimental groups. There were no statistically significant differences in adhesive interface sealing for any of the parameters assessed (P > 0.05). MB_100WA + Ca(OH)₂ and MB_100A + Ca(OH)₂ groups promoted a higher volume and quantification of voids compared to the negative control group evaluating the cervical third (P < 0.05). In general, there were no differences in the quantification of voids comparing the intraradicular thirds (P > 0.05), differently to the volume of voids in which, in general, the cervical third promoted higher values compared to the middle and apical thirds (P < 0.05).

CONCLUSION

aPDT with methylene blue PS at 50 mg/L associated with calcium hydroxide as intracanal medication demonstrated satisfactory bond strength, sealing, and integrity of the adhesive interface at any intraradicular depth.

Influence of agitation methods of irrigants after methylene blue-mediated PDT on the bonding interface of a fiber post cementation system

BACKGROUND

This study evaluated the effects of final agitation methods of irrigants to remove methylene blue and sodium hypochlorite residues after PDT-assisted endodontic treatment on the bond strength of fiber posts cemented with etch-and-rinse adhesive and conventional resin cement.

METHODS

Ninety bovine teeth were endodontically treated. In sequence, post space preparation followed by methylene blue-mediated PDT and sodium hypochlorite (NaOCl) irrigation were performed. Six final irrigations protocols for dye and NaOCl removal were performed prior to cementation with etch-and-rinse adhesive (Adper Scocthbond Multipurpose) and conventional dual resin cement (RelyX ARC): Conventional endodontic irrigation (CEI), passive ultrasonic irrigation (PUI), mechanical agitation with XP Endo Finisher (XPF), XP Clean (XPC) or Easy Clean (ECL) and distilled water (NCO - control). After fiber post cementation, push-out bond strength test was performed at different thirds of the post space. Failure mode was also analyzed. ANOVA and Tukey's post-hoc test was used for data analysis (α=5%).

RESULTS

PUI, XPF e XPC protocols showed the highest bond strength values with no difference among them (p > 0.05), although they were similar to NCO, regardless of the post space third. CEI e ECL showed similar bond strength values, regardless of the third (p > 0.05). Adhesive failure was the most incident for CEI and ECL, while mixed and cohesive failures were predominant in PUI, XPF, XPC and NCO groups.

CONCLUSIONS

Mechanical agitation of distilled water with XPF, XPC and PUI after methylene blue-mediated PDT and irrigation with 2.5% sodium hypochlorite promoted bond strength of the resin cementation system in post space dentin comparable to control group.

Effect of photodynamic therapy on resin-dentin bonding interface using different illumination time

OBJECTIVES

The aim of the present study was to evaluate the effect of photodynamic therapy(PDT) on the resin-dentin bonding interface using different illumination time.

METHODS

Seventy completed, isolated molar teeth were collected for this study, sixty of them were used in microtensile bond strength tests. These teeth were initially divided randomly in two main groups(n=30) by the random number table method upon the type of using illumination or not respectively. Then these groups followed by dividing each category in five subgroups(n=6): group A, group B1,group B2, group B3, group B4, group a, group b1, group b2, group b3, group b4. After different treatment, the remaining teeth were made specimens which were observed the fracture modes and interfaces under a stereomicroscope and a scanning electron microscope(SEM). The dentin permeability of the specimens were evaluated by a laser scanning confocal microscope(LSCM). To detect significance difference between means of different groups analysis of variance(ANOVA) was performed followed by LSD-t tests.

RESULTS

There was a significant statistical difference in the microtensile bond strength of the different illumination time of PDT between four experimental groups and the control (P<0.05).

CONCLUSION

With the increase of the illumination time in PDT, the bonding strength between resin and dentin decreased gradually.

Influence of photodynamic therapy and intracanal medication on Martens hardness, elastic modulus and bond strength of glass-fiber posts to endodontically treated root dentin

BACKGROUND

The purpose of this in vitro study was to evaluate the influence of photodynamic therapy (PDT) with methylene blue photosensitizer (PS) and calcium hydroxide intracanal medication on Martens hardness (MH), elastic modulus (Eit) and adhesive bond strength of glass-fiber posts in different thirds of intraradicular dentin.

METHODS

Ninety-six bovine teeth were distributed into the following 6 experimental groups: a negative control irrigated with deionized water; a positive control irrigated with deionized water and filled with calcium hydroxide intracanal medication (Ca[OH]₂); Ca[OH]₂ + methylene blue 50 mg/L without activation; Ca[OH]₂ + methylene blue 100 mg/L without activation; Ca[OH]₂ + methylene blue 50 mg/L activated by red laser; and Ca[OH]₂ + methylene blue 100 mg/L activated by red laser (n = 16). MH and Eit were measured using an ultramicrodurometer under load action of 3 mN (n = 8). Adhesive bond strength was measured using the push-out test in a universal testing machine (n = 8), and representative samples underwent scanning electron microscopy. Data on MH, Eit, and bond strength were subjected to normality tests and analyzed by ANOVA and Tukey's test (α = 0.05).

RESULTS

Methylene blue PS, activated or not by red laser, associated with calcium hydroxide medication did not promote significant difference as compared to the control groups irrigated with deionized water, associated or not with the use of intracanal medication, regarding mechanical properties and bond strength (p > 0.05). Experimental groups showed no difference between the thirds regarding root canal depth (p > 0.05), except for the positive control group, in which the apical third showed higher Eit values than the middle third (p = 0.0324). There was a predominance of mixed failure in all experimental groups, excepted the red laser-activated group treated with the highest concentration of methylene blue, which showed predominance of adhesive failure.

CONCLUSIONS

PDT with methylene blue PS at 50 mg/L, associated with intracanal calcium hydroxide medication is a satisfactory alternative for endodontic treatment as there is no interference in the mechanical properties and bond strength among glass-fiber posts to intraradicular dentin at any depth of the root canal.

Evaluation of various methods of methylene blue removal from the post space after photodynamic therapy on the bonding interface using different resin cementation systems

BACKGROUND

To evaluate the effects of three protocols for removing 0.01 % methylene blue from the post space after photodynamic therapy on bond strength and tag formation in the dentin of the fiber post space, using a conventional cementation system with an etch-and-rinse or universal adhesive system.

METHODS

Sixty human canines were endodontically treated for fiber post cementation. The specimens were randomized into 6 groups (n = 10): G1, G2, G3, G4, G5, and G6. The G1, G2, and G3 groups were irrigated with saline solution, 2.5 % sodium hypochlorite (NaOCl), and 2.5 % NaOCl, agitated by passive ultrasonic irrigation (PUI), respectively. In these groups, a conventional cementation system with etch-and-rinse adhesive was used. The G4, G5, and G6 groups were irrigated with the respective solutions mentioned above and cemented using a conventional cementation system with universal adhesive. Tag formation in the dentin was evaluated by confocal laser scanning microscopy. The push-out bond strength test was performed on three thirds of the specimens.

RESULTS

In the cervical and middle thirds, the greatest extent of dentin tag formation occurred in the G1 (p = 0.023 and p = 0.033, respectively). In the apical third, G1, G2, and G3 demonstrated similar tag formation between themselves (p = 0.089). In the cervical and middle thirds, G4 demonstrated the highest bond strength when compared to the other groups (p < 0.05).

CONCLUSION

The protocols for removing 0.01 % methylene blue with NaOCl, irrespective of the involvement of passive ultrasonic irrigation, negatively effects the bond strength and tag formation in the dentin of the post space.

Photosensitizers attenuate LPS-induced inflammation: implications in dentistry and general health

Antimicrobial photodynamic therapy (aPDT) is a complementary therapeutic modality for periodontal and endodontic diseases, in which Gram-negative bacteria are directly involved. Currently, there are few evidences regarding the effects of aPDT on bacterial components such as lipopolysaccharide (LPS) and it would represent a major step forward in the clinical use of this therapy. In this context, this study aimed to evaluate the efficacy of different photosensitizers (PSs) used in aPDT in LPS inhibition. Four PSs were used in this study: methylene blue (MB), toluidine blue (TBO), new methylene blue (NMB), and curcumin (CUR). Different approaches to evaluate LPS interaction with PSs were used, such as spectrophotometry, Limulus amebocyte lysate (LAL) test, functional assays using mouse macrophages, and an in vivo model of LPS injection. Spectrophotometry showed that LPS decreased the absorbance of all PSs used, indicating interactions between the two species. LAL assay revealed significant differences in LPS concentrations upon pre-incubation with the different PSs. Interestingly, the inflammatory potential of LPS decreased after previous treatment with the four PSs, resulting in decreased secretion of inflammatory cytokines by macrophages. In vivo, pre-incubating curcumin with LPS prevented animals from undergoing septic shock within the established time. Using relevant models to study the inflammatory activity of LPS, we found that all PSs used in this work decreased LPS-induced inflammation, with a more striking effect observed for NMB and curcumin. These data advance the understanding of the mechanisms of LPS inhibition by PSs.

Evaluation of antimicrobial photodynamic therapy with toluidine blue against Enterococcus faecalis: Laser vs LED

AIM

This study aimed to compare the antibacterial effect of antimicrobial photodynamic therapy (aPDT) by use of light emitting diode (LED) and diode laser light sources with toluidine blue (TBO) photosensitizer on Enterococcus faecalis (E. faecalis) biofilm in root canals of extracted single-canal human teeth.

METHODS

Eighty-five sound human single-canal teeth were chosen for this study and standardized to have 15 mm of root length. The root canals were prepared with ProTaper rotary files and inoculated and incubated with E. faecalis for one week. Samples were divided into five experimental (n = 15) groups of PDT with TBO/LED, TBO/diode laser, LED, TBO and diode laser and one negative (NaOCl) and one positive (no treatment) control group. Dentin chip samples were collected from inside the canals using size 40 hedstrom file. The number of colony forming units (CFUs) in each group was calculated.

RESULTS

Irrespective of the light source used for activation of photosensitizer (diode or LED), PDT was significantly more effective than other experimental groups (P < 0.001). No significant difference was noted between aPDT with diode laser or LED (P > 0.05). No significant difference was noted in colony count among other groups (LED, TBO, diode; P > 0.05).

CONCLUSION

The results showed that aPDT significantly decreased residual bacteria in the canal. Thus, it may be used as an adjunct for root canal disinfection. Both diode and LED are suitable light sources for this purpose and can be used alternatively.

Antimicrobial photodynamic therapy assessment of three indocyanine green-loaded metal-organic frameworks against Enterococcus faecalis

BACKGROUND

Antimicrobial photodynamic therapy (aPDT) has emerged as one of the promising non-invasive adjuvant treatments of endodontic infections. The key part of this technique is application of an optimized nontoxic photosensitizer (PS), like indocyanine green (ICG) which when activated by light can destroy bacterial contaminants. Notwithstanding all featured properties of ICG, this PS mainly suffers from the lack of stability and concentration-dependent aggregation. A variety of nanomaterials (NMs) has been widely exploited to improve the stability and efficiency of ICG. The objective of this study was to evaluate and compare the efficiency of three high capacious metal organic frameworks (MOFs) to produce MOF-ICG as novel PSs improving ICG loading, stability and antimicrobial activity. This is first report on ICG-loaded MOFs for aPDT against endodontic infections.

MATERIALS AND METHODS

Three different nano-MOFs were synthesized (denoted as Fe-101, Al-101 and Fe-88), and employed for ICG loading (MOF-ICG). The stability of immobilized ICG, antimicrobial and anti-biofilm properties of MOF-ICG against Enterococcus faecalis (E. faecalis) as one of the main factors of endodontic infections as well as expression ratio of the esp gene in E. faecalis were evaluated.

RESULTS

Fe-101 and Al-101 showed acceptable ICG loading (ICG loading capacity of 16.93 ± 0.32 and 18.17 ± 0.31, respectively) as well as considerable enhanced aqueous stability (percent of degradation were only 14% and 17%, respectively) in comparison to free ICG (percent of degradation was 95%) after 10 days. ICG-free MOFs could surprisingly suppress the viability of E. faecalis after laser irradiation up to 18.1%, 28.8%, and 38.3% for Al-101, Fe-88 and Fe-101, respectively. ICG loaded MOFs mediated aPDT could significantly reduce the count of E. faecalis to 60.72%, 45.12%, and 62.67%, respectively (p < 0.05). The Fe-88-ICG-PDT, Fe-101-ICG-PDT and Al-101-ICG-PDT considerably dropped the biofilm formation of E. faecalis by 37.54%, 47.01% and 53.68% (p < 0.05). The expression of esp gene was also remarkably declined to 4.4-, 6.0- and 6.2-fold after aPDT in the presence of Fe-88-ICG, Al-101-ICG and Fe-101-ICG, respectively (P < 0.05).

CONCLUSION

Owing to the significant features of the Fe-101 including acceptable ICG loading and stability, as well as reasonable antimicrobial effect after ICG loading in comparison to free ICG, it could be considered as a promising nano-PSs in aPDT to remove E. faecalis.