Evaluation of crown discoloration induced by endodontic sealers and colour change ratio determination after bleaching

Investigating the Effect of Internal Bleaching With 10% Carbamide Peroxide on the Color Change of Three Types of Common Endodontic Sealers

Background and purpose Color change caused by materials used for endodontic treatment is an important clinical issue. The current research examined the impact of internal bleaching with 10% carbamide peroxide on discolored teeth resulting from various types of sealers. Materials and methods In this study, 36 anterior teeth were cut from 1 mm beneath the cementoenamel junction (CEJ), and the samples were divided into three groups of 12. Then, AH26 (Tulsa Dental, Tulsa, OK), Endofill (Herpo Produtos Dentários Ltda, Petrópolis, Brazil), and AH Plus (Dentsply DeTrey, Konstanz, Germany) color change potential sealers were placed inside the pulp chamber. The cervical access cavity was covered with a thin layer of glass ionomer. After one month, the material was removed, and bleaching was done with 10% carbamide peroxide. The color of the samples was measured by a spectrophotometer before bleaching, one week after bleaching, and one week after bleaching again. The data were subjected to statistical analysis using the Statistical Package for Social Sciences (SPSS) software version 16 (IBM SPSS Statistics, Armonk, NY), with a significance level set at P<0.05. Results The results showed that the factor of time and material used and the opposing effect of these two on the amount of L and ΔE were statistically significant (P<0.05). After one to two weeks of internal bleaching, all groups showed some degree of reduction in sealer-induced discoloration. In addition, in all groups, the largest difference in L was related to the difference in L0 and L2 (before bleaching and one week after bleaching again), and the lowest difference was related to the difference in L0 and L1. Also, the highest ΔE(T0,T1) belonged to the Endofill group, and this significantly differed from the AH26 group. AH26 showed the lowest value of ΔE(T0,T1), and after two weeks, the ΔE of all groups was higher than the clinically observable limit. The highest ΔE(T2,T0) among the groups belonged to the Endofill group. The ΔE(T2,T0) of AH26 and Endofill was significantly higher than AH Plus. Among all ΔE values, the AH Plus group had the lowest values. Conclusion Color change caused by Endofill and AH26 sealers showed a better response to internal bleaching than the AH Plus sealer.

A facile method for rejuvenating the bonding efficacy of root canal sealer-smeared dentine

OBJECTIVES

To examine the efficacy of glycine powder air-polishing on cleaning root canal sealer-smeared dentine.

METHODS

Dentine surfaces were contaminated with a smear of epoxy resin-based sealer or tricalcium silicate-based sealer. The contaminated surfaces were cleaned with saline, 75% ethanol, or air-polishing with glycine powder. Uncontaminated dentine was used as the control. The cleanliness of pulpal floor dentine was examined using scanning electron microscopy and energy dispersive X-ray analysis. The effectiveness of the three cleaning protocols was examined by testing the tensile bond strength of a self-etching adhesive to the decontaminated dentine. Resin infiltration into the dentinal tubules was identified using confocal laser scanning microscopy (CLSM).

RESULTS

Morphological examination and elemental analysis indicated that glycine powder air-polishing was more effective in removing the two sealers. Tensile bond strength of adhesive-bonded dentine was significantly reduced when either sealer was cleaned with saline or ethanol. Conversely, air-polishing restored the adhesive strength of the sealer-smeared dentine to the level of the control. Longer and denser resin tags were identified with CLSM when sealers were removed with air-polishing.

CONCLUSIONS

Air-polishing with glycine powder was effective in cleaning sealer-smeared dentine, as demonstrated by the rejuvenation of the tensile bond strength of a self-etching adhesive to the decontaminated dentine.

CLINICAL SIGNIFICANCE

Glycine powder air-polishing improves the cleanliness of root canal sealer-smeared dentine and rejuvenates adhesive bonding effectiveness.

DENTAL PATIENT-REPORTED OUTCOMES IN ENDODONTICS - A NARRATIVE REVIEW

Recently in oral health care settings, the focus of assessing treatment outcomes has shifted from the perspective of the clinician towards that of the patient. Endodontology is a specialty of dentistry concerned with the prevention and treatment of pulp and periapical diseases. Research in endodontology and its associated treatment outcomes have focused mainly on clinician-reported outcomes (CROs) and not dental patient-reported outcomes (dPROs). As a result, there is a need to emphasize the importance and relevance of dPROs to researchers and clinicians. The aim of this review is to present an overview of dPROs and dPROMs within endodontics in an attempt to create a better understanding of the patient experience, highlight the need to place the patient at the center of treatment, enhance patient care and encourage more research into dPROs. The key dPROs following endodontic treatment include pain, tenderness, tooth function, need for further intervention, adverse effects (exacerbation of symptoms, tooth discoloration) and Oral Health-Related Quality of Life. dPROs are important following endodontic treatment because they assist clinicians and patients when they discuss and select the most appropriate management options, help clinicians make decisions on pre-operative assessment, prevention and treatment, and improve the methodology and design of future clinical studies. Clinicians and researchers in endodontology should prioritize patient welfare and undertake routine analyses of dPROs using appropriate and robust measures. Due to the lack of agreement over the reporting and definition of endodontic treatment outcomes, a comprehensive project to define a ``Core Outcome Set for Endodontic Treatment Methods (COSET)'' is currently ongoing. In the future, a new and exclusive assessment tool should be developed to reflect the viewpoints of patients receiving endodontic treatment more accurately.

Colorimetric Comparison of Internal Bleaching with and without Removing Mineral Trioxide Aggregate (MTA) on Induced Coronal Tooth Discoloration by MTA

Objective. This study aimed to colorimetric comparison of internal bleaching with and without removing mineral trioxide aggregate (MTA) on induced coronal tooth discoloration by MTA cement. In this experimental study, twenty human teeth were prepared. An OrthoMTA barrier was placed 1 mm below the CEJ. The teeth were restored with composite resin and were placed in the aging accelerator machine. Then, the specimens were divided into two groups (n = 10); in group A, part of the OrthoMTA was removed and the glass ionomer was placed on the OrthoMTA, and in group B, the OrthoMTA remained intact. Internal bleaching was performed 5 times in 6-day intervals using 37% carbamide peroxide gel. Color determination was performed in 5 stages: baseline, after OrthoMTA discoloration, before OrthoMTA removal, after OrthoMTA removal, and after bleaching treatment sessions. In group A, 8 specimens reached to ∆E < 3.3 after 2 times internal bleaching treatment, and in group B, 5 specimens reached to ∆E < 3.3 with almost 3 bleaching sessions (p > 0.05). Additionally, 5 specimens reached to the initial color (baseline) after bleaching treatment, 4 specimens in group A and 1 specimen in group B. After OrthoMTA removal, 2 specimens in group A reached to ∆E < 3.3. There was no significant difference between groups with or without OrthoMTA removal (p=0.06). Although, the specimens with OrthoMTA removal required fewer bleaching treatment sessions, and the mean value of ∆E was lower in this group.

Role of enamel and dentin on color changes after internal bleaching associated or not with external bleaching

Objective

To evaluate the effect of the association between external and internal tooth bleaching on color changes in dentin and enamel, individually or recombined, previously stained with triple antibiotic paste (TAP).

Methodology

Forty enamel-dentin specimens from bovine incisors were separated into ten blocks according to similarity in their whiteness index (WID). Three specimens within each block were stained by dentin exposure to TAP, and the remaining specimen was used as control to estimate color changes. Specimens were sectioned to separate tissues, and dentin and enamel colors were measured individually and after being recombined. Alterations in color (CIEDE2000 - ΔE₀₀) and translucency parameter (TP) resulting from staining were estimated by color difference between stained and control specimens. The contribution of each tissue to the color change (CTCC) was also calculated. Non-sectioned stained specimens were bleached by applying sodium perborate on dentin, associated or not with 35% hydrogen peroxide on enamel. Color changes caused by bleaching procedures were estimated and data were analyzed using the paired t-test or Two-way repeated measures ANOVA.

Results

TAP caused more pronounced changes in dentin, but enamel color was also affected. Both protocols presented a similar ΔE₀₀, and dentin showed the greater color change. After exposure to TAP, we observed a reduction in WID; WID values were the same for bleached and control specimens regardless of protocol. We found no significant effect of substrate and bleaching technique on TP. Enamel played a more critical role in color changes caused by either staining or bleaching procedures.

Conclusion

Enamel color played a greater role on tooth color changes than dentin. External and internal bleaching association did not improve bleaching effect on specimens stained with TAP.

Tooth discoloration caused by endodontic treatment: A cross-sectional study

INTRODUCTION

This cross-sectional study evaluated the influence of endodontic filling material, cervical limit of root filling, and tooth location on the color variation (∆E₀₀ ) from 1 to 60 months of follow-up.

MATERIALS AND METHODS

Color records were obtained from 70 participants who received 83 endodontic treatments. CIEL*a*b* color coordinates were measured on the homologous tooth, which was considered as baseline, and on endodontic treated teeth with a spectrophotometer. ∆E₀₀ was calculated by the CIEDE2000 method at three conditions (condition 1: homologous tooth vs endodontically treated tooth after ≤1 month; condition 2: homologous tooth vs endodontically treated tooth after >1-12 months; condition 3: homologous tooth vs endodontically treated tooth after >12 months up to 5 years) for each variable. The zinc oxide and eugenol mineral trioxide aggregate or resin-based filling materials, dental cervix or ≥2 mm in the apical direction cervical limit of root filling and anterior or posterior tooth location were considered in the comparisons. Confidence intervals for the means (95% CI) were calculated, ∆E₀₀ values and CIEL*a*b* individual color coordinates were compared for each pair of variables using the Student t test or Welch test (α = .05).

RESULTS

Greater ∆E₀₀ values were generally observed in the condition 3 for cervical limit (∆E₀₀ = 10.7), use of zinc oxide and eugenol and mineral trioxide aggregate-based filling materials (∆E₀₀ = 10.7), and anterior teeth (∆E₀₀ = 12.4). Only in the condition 1, the ∆E₀₀ values of the filling materials did not show statistical differences (P = .198).

CONCLUSIONS

Higher ∆E₀₀ values were yielded from zinc oxide and eugenol and mineral trioxide aggregate-based filling materials, anterior teeth, and dental cervix cervical limit of root filling.

CLINICAL SIGNIFICANCE

Tooth discoloration yielded by endodontic materials and procedures is a challenge to clinical practice resulting in aesthetic problems and discomfort to both patient and professional, especially when it occurs in anterior teeth.

Mineral trioxide aggregate and other bioactive endodontic cements: an updated overview - part II: other clinical applications and complications

Mineral trioxide aggregate (MTA) is a dental material used extensively for vital pulp therapies (VPT), protecting scaffolds during regenerative endodontic procedures, apical barriers in teeth with necrotic pulps and open apices, perforation repairs as well as root canal filling and root-end filling during surgical endodontics. A number of bioactive endodontic cements (BECs) have recently been introduced to the market. Most of these materials have calcium and silicate in their compositions; however, bioactivity is a common property of these cements. These materials include the following: BioAggregate, Biodentine, BioRoot RCS, calcium-enriched mixture cement, Endo-CPM, Endocem, EndoSequence, EndoBinder, EndoSeal MTA, iRoot, MicroMega MTA, MTA Bio, MTA Fillapex, MTA Plus, Neo MTA Plus, Ortho MTA, Quick-Set, Retro MTA, Tech Biosealer, and TheraCal LC. It has been claimed that these materials have properties similar to those of MTA but without the drawbacks. In Part I of this review, the available information on the chemical composition of the materials listed above was reviewed and their applications for VPT was discussed. In this article, the clinical applications of MTA and other BECs will be reviewed for apexification, regenerative endodontics, perforation repair, root canal filling, root-end filling, restorative procedures, periodontal defects and treatment of vertical and horizontal root fractures. In addition, the literature regarding the possible drawbacks of these materials following their clinical applications is reviewed. These drawbacks include their discolouration potential, systemic effects and retreatability following use as a root filling material. Based on selected keywords, all publications were searched regarding the use of MTA as well as BECs for the relevant clinical applications. Numerous publications were found regarding the use of BECs for various endodontic applications. The majority of these investigations compared BECs with MTA. Despite promising results for some materials, the number of publications using BECs for various clinical applications was limited. Furthermore, most studies had several methodological shortcomings and low levels of evidence.

Tooth Discoloration Resulting from a Nano Zinc Oxide-Eugenol Sealer

Introduction:

A desirable quality of any endodontic sealer is its ability to be tooth color friendly. Therefore the aim of the present study was to evaluate the tooth discoloration potential of a nano zinc oxide-eugenol (NZOE) sealer.

Methods and Materials:

In order to evaluate tooth discoloration, the pulp chamber of 60 human maxillary central and lateral incisors were filled with one of the sealers, naming AH-26 (resin-based sealer), Pulpdent sealer (ZOE-based) and a NZOE experimental sealer. Color measurements was assessed at the baseline (before placement of sealers) (T0), 24 h (T1) and 72 h (T2) h, 1-week (T3), and 1-month (T4) after the placement of sealers using the Easy Shade spectrophotometer. Data were analyzed in SPSS software using one-way ANOVA, and repeated measured ANOVA.

Results:

No significant differences were observed when the paired comparison test was performed (P>0.05).

Conclusion:

The tested NZOE sealer had similar tooth discoloration potential in comparison with AH-26 and ZOE sealer.