Contribution of XP-Endo files to the root canal filling removal: A systematic review and meta-analysis of in vitro studies

Characteristics and Effectiveness of XP-Endo Files and Systems: A Narrative Review

Background: XP-endo files are composed of Max-Wire alloy, which was developed by FKG Dentaire (La Chaux-de-Fonds, Switzerland). This alloy, known as Martensite-Austenite Electropolish Flex, is the first NiTi alloy used in endodontics to combine the shape memory effect with superelasticity for use in clinical practice. Objective: This article aims to provide a comprehensive overview of the existing knowledge and evidence regarding different XP-endo files and systems, XP-endo Finisher (XPEF), XP-endo Shaper (XPES), XP-endo Retreatment (XPER), XP-endo Rise (XPE-Rise), and XPE-Rise Retreatment (XPE-Rise-R), to help clinicians understand their different properties and recommended clinical uses. Moreover, this review aims to identify future research opportunities in this field. Materials and Methods: A search was performed in the PubMed database using the keywords "XP endo" or "XP-endo". A total of 309 studies were identified during the initial search, and then initial abstract screening was conducted. The inclusion criteria included any study that aimed to evaluate XP endo files and systems on permanent teeth, either in vivo or in vitro. We excluded studies that were unrelated to the subject, literature reviews, case studies, and studies that employed deciduous teeth. Finally, we performed an extensive review of the selected 130 studies, which we assessed, summarized, and classified based on the specific XP-endo file used. Conclusion: Overall, XP-endo files offer significant improvements in endodontic treatment. XPEF excels in irrigation activation and medicament removal, and XPES succeeds in canal cleaning, shaping, and retreatment. The XPER system, which incorporates the XPEF-R file, shows promise in removing root-filling materials, but its performance is inconsistent compared to other retreatment systems. We have found limited information regarding the latest XPE-Rise and XPE-Rise-R systems, additional research is required to fully determine their comparative effectiveness and optimize their clinical application.

Effect of Calcium Hydroxide as an Intracanal Medication on Dentine Fracture Resistance: A Systematic Review and Network Meta-Analysis

INTRODUCTION

Bacterial infections necessitate effective root canal disinfection during endodontic therapy. Calcium hydroxide (CH), a widely used intracanal medication, shows conflicting effects on dentine fracture resistance in different studies. This study aimed to perform a comprehensive systematic review and network meta-analysis to evaluate the effects of CH on the fracture resistance of dentine in human teeth across different periods.

METHODS

PubMed, EMBASE, MEDLINE (EBSCO), Cochrane Library, Scopus, Google Scholar, and ProQuest databases were exhaustively searched to identify studies published until February 29, 2024, with no language restrictions. Laboratory studies that investigated dentine fracture resistance in human permanent teeth following intracanal CH exposure were included. The risk of bias was evaluated using modified criteria derived from previous studies. Network meta-analysis was performed using the frequentist method. Prespecified subgroup analyses focused on simulating immature teeth.

RESULTS

The search yielded 2,265 studies from all databases, and 27 met the inclusion criteria, involving 3,879 teeth or roots. The overall results from network meta-analysis indicated that CH affected the fracture resistance of human dentine. Subgroup analysis revealed that the duration influencing fracture resistance was ≥4 weeks for mature teeth, but no specific time limitation for immature teeth. The overall quality of the evidence showed a moderate to high risk of bias.

CONCLUSIONS

Short-term use of CH does not compromise human root dentine strength, supporting its routine application in clinical practice. CH remains a viable treatment strategy for over 4 weeks of medication needs but requires carefully considering the associated risks and benefits emphasizing on preservation and disease resolution.

REGISTRATION

PROSPERO database (CRD 42024513199).

Impact of low-fusion gutta-percha cones used in variations of the continuous wave condensation technique with filling sealers based on bioceramic compounds on the quality of root canal filling

To evaluate the impact on the quality of filling with of low-fusion and conventional gutta-percha cones. Thirty-six maxillary canines were prepared and divided into three groups: I-conventional cone with Downpack at 200 °C at 4 mm from the WL; II-low-fusion cone with Downpack at 100 °C up to 4 mm from the WL; III-low-fusion cone with Downpack at 100 °C up to 7 mm from the WL. Temperature variations were measured in thirds on the external surface of the root. The bond strength was evaluated using the push-out test. The adhesive interface was analyzed by scanning electron microscopy. The bond strength and the temperature variation data were analyzed using analysis of variance and the failure type using the chi-square test. The low-fusion cone group with 7 mm Downpack showed higher bond strength (4.2 ± 2.7) compared with conventional cones (2.8 ± 1.6) and low-fusion cones with 4 mm Downpack (2.9 ± 1.6) (p < 0.05), with occurrence of a higher number of adhesive failures to the filling material and mixed failures. Relative to temperature variation, there was less temperature change in the apical third, in the low-fusion cone with Downpack 7 mm (1.0 ± 1.0) (p < 0.05). The use of low-fusion cones allowed the continuous wave condensation technique to be performed at a lower depth of Downpack at 100 °C at 7 mm, with less heating in the apical third, without compromising the quality of filling. Using gutta-percha cones with low fusion, which permits a lower condensation temperature and reduced Downpack depth, maintains the quality of filling, in order to minimize possible damage to the periapical tissues.

Impact of different activation procedures on sodium hypochlorite penetration into dentinal tubules after endodontic retreatment via confocal laser scanning microscopy

BACKGROUND

Infected dentinal tubules are a possible source of bacteria that are responsible for the failure of root canal treatment. Therefore, disinfection of dentinal tubules by increasing the penetration of the irrigation solution is important for success in retreatment cases. This study utilized confocal laser scanning microscopy (CLSM) to assess and compare the impact of XPR, ultrasonic irrigation (UI) and sonic activation (SA) on NaOCl penetration into dentinal tubules following endodontic retreatment.

METHODS

A total of forty mandibular premolars were enrolled in this investigation. Following root canal preparation up to ProTaper X3 file (30/0.07), root canals were obturated with gutta-percha and bioceramic root canal sealer with single cone technique. The root canal filling materials were removed using ProTaper nickel-titanium rotary retreatment files until the working length was reached. The retreatment procedure was finalized using the ProTaper Next X4 (40/0.06). The teeth were divided into four groups based on the irrigation activation technique: control (conventional needle irrigation), SA, UI and XPR. During the final irrigation procedure, Rhodamine B dye was introduced to 5% NaOCl for visualization via CLSM. Subsequent to image acquisition, the maximum penetration, penetration percentage, and penetration area were calculated. Data were statistically analyzed using the Kruskal-Wallis, Friedman, and Bonferroni Dunn multiple comparison tests through R software (p < 0.05).

RESULTS

In the middle third, UI yielded a significantly higher penetration percentage than the control group (p < 0.05). The UI and XPR groups showed increased penetration percentages in the coronal and middle thirds compared with the apical third (P < 0.05). Maximum penetration was notably reduced in the apical third than in comparison with the coronal and middle thirds in all groups (p < 0.05). In the control, SA and XP groups, the penetration area was ranked in descending order as coronal, middle and apical (p < 0.05). Conversely, in the ultrasonic group, the penetration area was significantly lower in the apical third than in the middle and coronal thirds (p < 0.05).

CONCLUSIONS

UI enhanced the penetration percentage in the middle third of the root compared with that in the control group. XPR and SA showed no significant effect on NaOCl penetration following retreatment.

In Vitro Cone Beam CT Analysis of the Efficacy of Three Supplementary Steps In the Removal of Obturation Material in Endodontic Retreatment

OBJECTIVES

To evaluate and compare the efficacy of XP-endo Finisher R (FKG Dentaire, Le Locle, Neuchatel, Switzerland), EDDY (VDW Dental, Munich, Germany), and passive ultrasonic irrigation (PUI) as supplementary steps following the D-RaCe retreatment file system (FKG Dentaire) in the removal of root canal obturation material using cone beam CT.

MATERIALS AND METHODS

A total of 45 two-rooted permanent maxillary first premolars were selected. Following access preparation, cleaning, and shaping with Hero Shaper (Micro Mega, Besançon, BFC, France) rotary file up to 25/04%, thermoplasticized obturation was performed with TotalFill BC sealer (FKG Dentaire) and gutta-percha. The specimens were subjected to routine retreatment using the D-RaCe retreatment file system. Cone beam computed tomography (CBCT) and volumetric analysis were performed before and after this procedure. The samples were divided into group A (XP-endo Finisher R: n=15), group B (EDDY: n=15), and group C (PUI: n=15). Finally, a third CBCT was taken and a volumetric analysis was done. Statistical analysis was done using SPSS Statistics version 26.0 (IBM Corp., Armonk, NY, USA).

RESULTS

The lowest mean residual volume of obturation material was seen with XP-endo Finisher R (1.6 mm3), followed by PUI (1.7 mm3). The EDDY showed the least efficiency in complete debridement of the root canals (3.6 mm3). This difference in values was statistically significant.

CONCLUSION

The XP-endo Finisher R and PUI showed superior performance than EDDY in the removal of remaining obturation material from the root canal system after retreatment with the D-RaCe retreatment file system. However, none of the systems were able to completely remove the root canal obturation materials.

Cleaning efficacy and debris extrusion of supplementary file systems XP-endo Finisher and XP-endo Finisher R in endodontic retreatment

Aim

To evaluate cleaning efficacy and debris extrusion of supplementary file systems XP Endo Finisher (XPEF) and XP Endo Finisher R (XPEFR) in endodontic retreatment.

Materials and Methods

Thirty single-rooted teeth with single canals were selected, canal preparation done till file #30 6% and obturation completed using lateral condensation technique with AH Plus sealer. The samples were stored at 37°C in a 100% humidity incubator for 7 days. The samples were distributed across the three groups according to the method of retreatment (n = 10): Group I: Neo Endo retreatment (NER) files, Group II: NER files + XPEF, and Group III: NER files + XPEFR. Removal of gutta percha using each file system according to the distributed groups was performed. The extruded debris was collected in an Eppendorf tube, dried in a hot air oven, and weighed. Teeth were sliced longitudinally using carborundum discs. Coronal, middle, and apical thirds were assessed for cleaning efficacy under a stereomicroscope. Results were tabulated and subjected to the statistical analysis using the Kruskal-Wallis H-test followed by post hoc turkey HSD test. All statistical tests were carried out at significance level P < 0.05.

Results

It was seen that Group II (NER files + XPEF) exhibited better cleaning efficacy than Group III (NER files + XPEFR), although the results were not statistically significant. Greater debris extrusion was seen with Group III when compared to Group II.

Conclusion

Supplementary files XPEF/XPEFR enhance the cleaning efficacy in endodontic retreatment, but the debris extrusion of XPEFR is more than XPEF.

Citric Acid Conditioning as an Alternative to EDTA for Growth Factors Release and Stem Cell Response in Regenerative Endodontics: A Systematic Review of In Vitro Studies

INTRODUCTION

Citric acid (CA) conditioning may be a promising alternative to ethylenediaminetetraacetic acid (EDTA) in regenerative endodontic procedures, as reported to improve growth factors' release from dentin. This review systematically investigated the effect of CA conditioning on the growth factors release from dentin and cell behavior compared to EDTA conditioning.

METHODS

Searches were conducted (PubMed/MEDLINE, Scopus, Web of Science, Embase, SciELO, Cochrane Library, and grey literature) until May-2023. Only in vitro studies that evaluated the effects of CA on growth factors' release from dentin and cell behavior outcomes compared to EDTA were included. The studies were critically appraised using a modified Joanna Briggs Institute's checklist. Meta-analysis was unfeasible.

RESULTS

Out of the 335 articles screened, nine were included. Among these, three studies used dentin discs/roots from permanent human teeth; the rest combined them with stem cells. 10% CA for 5 or 10 minute was the most used protocol. Meanwhile, EDTA concentrations ranged from 10% to 17%. In eight studies examining the release of growth factors, five reported a significant release of transforming growth factor-β after dentin conditioning with 10% CA compared to 17% EDTA. Regarding cell behavior (6 studies), three studies assessed cell viability. The findings revealed that 10% CA conditioning showed cell viability similar to those of 17% EDTA. Additionally, in two out of three studies, it was observed that 10% CA conditioning did not affect cell morphology. The studies had a low risk of bias.

CONCLUSIONS

The use of 10% CA to condition dentin for 5-10 minutes resulted in a notable transforming growth factor -β1 release, but its cell responses were similar to those of EDTA.

Impact of access cavities on root canal preparation, restorative protocol quality, and fracture resistance of teeth

The survival of endodontically treated teeth depends on the remaining tooth structure. The aim of this study was to evaluate the impact of different access cavities on root canal preparation, restorative protocol, and fracture resistance of endodontically treated teeth. Fifty-six mandibular molars were divided into control (n=8) and experimental (n=16) groups according to access cavity: Traditional, Conservative, and Truss; and redistributed (n=8) according to instrumentation protocols: Reciproc Blue and R-motion. After, teeth were scanned in micro-CT and then filled and redistributed according to composite resin restoration (n=8): Filtek One BulkFill and Filtek Z350. A new micro-CT scan was performed to analyze the restorative material. Then, samples were submitted to fracture resistance testing and the failure pattern was determined. Data were analyzed using paired T-test, ANOVA, Tukey, and chi-square tests (α=0.05). In Truss, R-Motion promoted less transportation in different thirds of root canals. Higher percentages of voids (5.05%) and filling material (11.7%) were observed in Truss. Fracture resistance values were higher for the control group, followed by Truss, Conservative, and Traditional. The predominant failure pattern was type-II. In Truss, reciprocating instruments with smaller taper showed less canal transportation. Also, Truss provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material. Thus, in Truss, reciprocating files with smaller taper showed less canal transportation, and these cavities provided higher values of fracture resistance, although it presented a higher percentage of voids and remaining filling material.

Endodontic Orthograde Retreatments: Challenges and Solutions

Endodontic orthograde retreatments are considered one of the possible treatment options in case of post-treatment diseases considering the promising results present in the literature. Despite this, a plethora of articles have been published on this topic, and drawing conclusions could be challenging. For this reason, this review aims to summarize the crucial points on each aspect of non-surgical endodontic retreatments, discussing and comparing the current protocols, techniques, materials, and indications. Taking into consideration data from the literature, in terms of diagnosis, CBCT should be considered the first choice, since it can thoroughly affect the diagnosis and treatment plan. Regarding the procedural phases, some conclusions can be drawn: when present, coronal restoration materials such as crowns, partial prostheses, post, and core should be removed; the use of magnification devices, ultrasonic instruments, and an in-depth interpretation of radiographic images with both 2D and 3D images are strongly recommended during the orifice location; additional protocols such as irrigants activation, ultrasonic cleaning, and rotary or reciprocating instrumentation of treated canals are strongly recommended for filling materials removal and to achieve a high-quality chemo-mechanical disinfection; perforations should be treated as soon as possible, and the material of choice to treat them is the MTA or other calcium-silicate-based repair materials; the presence of ledges does not intrinsically reduce the success rate of RCRts if properly managed; in case of instrument fragments, their removal should be considered as the first treatment option, however many variables should be considered to select the proper technique or consider the option of bypassing.

Irrigants and irrigation activation systems in Endodontics

Root canal infections are typically polymicrobial and involve strong bacterial interactions. The goal of endodontic treatment is to remove infected content from the root canal system to allow the healing of a pre-existing periapical lesion or to prevent infection of the periradicular tissues. Instrumentation alone is not capable of touching all of the root canal walls. Therefore, the irrigation process is an essential step in the endodontic treatment. However, due to the complex anatomy of the root canal system, this cleaning is very challenging. Although syringe and needle irrigation associated with the use of chemical substances is still the most used method, it does not guarantee optimal cleaning of the root canals. As a result, not only alternative irrigating substances but also numerous activation systems - which are technologies that aim to optimize the action of irrigating substances, both chemically and physically - have been developed. This work aimed to review the characteristics of both classic and current alternatives of irrigating substances and irrigation activation systems.

Comparable Effectiveness of Photon-Induced Photoacoustic Streaming with XP-Endo Finisher and Passive Ultrasonic Irrigation on Removing Residual Root Canal Filling Materials from Oval Canals

Objective: This study aimed to evaluate the effectiveness of photon-induced photoacoustic streaming (PIPS), XP-endo Finisher (XPF), and passive ultrasonic irrigation (PUI) for the removal of root canal filling materials from oval root canals. Background: Various adjunctive irrigation techniques following mechanical preparation have been applied to enhance removal of fillings during root canal retreatment. However, whether there is superiority of one approach over others remains controversial. Methods: Thirty extracted single-rooted teeth with oval-shaped canals were instrumented with the ProTaper Next (PTN) system and obturated with the warm vertical compaction technique. After storage at 37°C for 1 month, retreatment was performed with the PTN system up to size X4. The teeth were then randomly assigned into three groups (n = 10) that were, respectively, subjected to supplementary irrigation with different protocols: PIPS, PUI, and XPF, followed by measurement of filling material volumes using high-resolution micro-computed tomography. Results: The PTN preparation resulted in significant reductions in residual filling materials (p < 0.05), whereas PIPS, PUI, and XPF moderately improved the removal of the remnants (p > 0.05). The residual filling materials after supplementary irrigation ranged from 0.384 ± 0.181 to 0.421 ± 0.143 mm³ in oval canals. There was no significant difference in the effectiveness among the PIPS, PUI, and XPF approaches (p > 0.05). Conclusions: Mechanical preparations are useful for removing most root fillings during retreatment in oval-shaped canals. PIPS can reduce residual root-filling materials to the similar extent as PUI and XPF.

Effectiveness of Two Endodontic Instruments in Calcium Silicate-Based Sealer Retreatment

The objective of the present in vitro work was to investigate the effectiveness and time required for the removal of calcium silicate-based sealer using two rotary retreatment systems. Sixty extracted, single-canal, lower premolars were used. After obturation using the single-cone technique with calcium silicate-based sealer, samples were divided into four groups according to the technique of desobturation: Group 1 (G1): D-Race; Group 2 (G2): D-Race followed by the use of XP-Endo Finisher R; Group 3 (G3): Protaper Universal Retreatment; and Group 4 (G4): Protaper Universal Retreatment followed by the use of XP-Endo Finisher R. Cone beam computed tomography (CBCT) images were used to calculate the remaining filling materials at the middle and apical thirds. Times required to perform each method were recorded. Scanning electron microscopy (SEM) and digital microscopy were used to evaluate the remaining filling materials. Data were statistically analyzed using the t-test and one way ANOVA on ranks tests. No statistically significant difference was found between G1 and G3 after CBCT observations (p > 0.05). Xp-Endo Finisher R significantly increased the ability to remove materials regardless of the initially used retreatment system (p < 0.05). Statistically significant longer time was found in G3 and G4 compared to G1 and G2, respectively (p < 0.05), to reach the full working length. No retreatment system was able to totally remove the calcium silicate-based sealer from the root canal at the middle and apical thirds (p > 0.05). Digital microscopy demonstrated that the residual materials were the remaining sealers on the canal walls. SEM showed the mineral depositions of calcium silicate materials onto the canal walls and into the dentinal tubules. However, that calcium silicate materials provide mineral deposition into the dentinal tubules might indicate that the traditional irrigants could not be sufficient to remove calcium silicate-based materials from the root canal, and other agents should be used to make retreatment considerably easier.

Methodological quality assessment criteria for the evaluation of laboratory-based studies included in systematic reviews within the specialty of Endodontology: a development protocol

High quality systematic reviews in the field of Dentistry provide the most definitive overarching evidence for clinicians, guideline developers and healthcare policy makers to judge the foreseeable risks, anticipated benefits, and potential harms of dental treatment. In the process of carrying out a systematic review, it is essential that authors appraise the methodological quality of the primary studies they include, because studies which follow poor methodology will have a potentially serious negative impact on the overall strength of the evidence and the recommendations that can be drawn. In Endodontology, systematic reviews of laboratory studies have used quality assessment criteria developed subjectively by the individual authors as there are no comprehensive, well-structured, and universally accepted criteria that can be used objectively and universally to individual studies included in reviews. Unfortunately, these subjective criteria are likely to be inaccurately-defined, unreliably-applied, inadequately-analysed, unreasonably-biased, defective, and non-repeatable. The aim of the present paper is to outline the process to be followed in the development of comprehensive methodological quality assessment criteria to be used when evaluating laboratory studies that should be included in systematic reviews within Endodontology. The development of new methodological quality assessment criteria for appraising the laboratory-based studies included in systematic reviews within Endodontology will follow a three-stage process. First, a steering committee will be formed by the project leaders to develop a preliminary list of assessment criteria by modifying and adapting those already available, but with the addition of several new items relevant for Endodontology. The initial draft assessment criteria will be reviewed and refined by a Delphi Group (n=40) for their relevance and inclusion using a nine-point Likert scale. Second, the agreed items will then be discussed in an online or face-to-face meeting by a group of experts (n=10) to further refine the assessment criteria. Third, based on the feedback received from the online/face-to-face meeting, the steering committee will revise the quality assessment criteria and subsequently a group of authors will be selected to pilot the new system. Based on the feedback collected, the criteria may be revised further before being approved by the steering committee. The assessment criteria will be published in relevant journals, presented at national and international congresses/meetings, and will be freely available on a dedicated website. The steering committee will update the assessment criteria periodically based on feedback received from end-users.

Impact of several NiTi-thermally treated instrumentation systems on biomechanical preparation of curved root canals in extracted mandibular molars

AIM

To evaluate the shaping ability of several heat-treated nickel-titanium systems used to prepare root canals with moderate and severe curvature, in extracted mandibular molars, by micro-computed tomography, considering their variation in kinematics and design.

METHODOLOGY

Curved-mesial roots of mandibular molars were randomly selected and assigned into 4 balanced experimental groups (n = 10), established by determining homogeneous 3D parameters of volume and surface area: R-Motion (RM) size 30, 0.04 taper (RM; FKG Dentaire), Reciproc Blue (RCB) size 25, 0.08 taper (RCB; VDW GmbH), HyFlex CM (HFX) size 30, 0.04 taper (HFX; Coltène Whaledent) and XP-endo Shaper size (XPS) 30, 0.01 taper (XPS; FKG Dentaire). The volume of irrigation was established at 10 ml of 2.5% NaOCl. Throughout the entire root canal preparation procedures, the samples were fixed in a vice submerged in a container with water monitored at 37°C. Dimensional cross-sectional measures of area, perimeter, roundness, major/minor diameters and 3-dimensional (volume, surface area, structure model index - SMI) parameters as well as the smallest dentine thickness along the cervical and middle root thirds were evaluated by micro-CT. Data were analysed using analysis of variance and post hoc Tukey tests (α = 5%).

RESULTS

Reciproc Blue and XPS had significantly greater mean increases in cross-sectional area measurements, only in the middle third, when compared with RM and HFX (p < .05). RM, RCB and XPS had a similar increase in measurements of length and width of perimeter (p > .05), and HFX had significantly lower mean increases in perimeter values only when compared with XPS (p < .05). RCB and XPS had significantly greater mean increases in volume when compared with RM and HFX (p < .05). RM had a significantly lower difference in SMI after preparation, compared with RCB, HFX and XPS (p < .05). The smallest dentine thickness was observed after the use of RCB (p < .05), in the danger and safety zones.

CONCLUSIONS

XP-endo Shaper and RM had a shaping ability similar to that of instruments with larger tapers, achieved with less dentine removal in danger and safe zones in curved-mesial canals of extracted molar teeth treated on a laboratory benchtop.

Passive ultrasonic irrigation, EndoActivator system and XP-endo Finisher R as additional cleaning techniques to remove residual filling materials from flattened root canals

Background:

The effectiveness of endodontic retreatment essentially depends on the cleaning and/or disinfection processes. In this context, the removal of root canal filling materials plays a crucial role.

Aims:

To assess the efficacy of passive ultrasonic irrigation (PUI), EndoActivator system (EAS), and XP-endo Finisher R (XPEFR) as additional cleaning techniques to remove the remaining root canal filling materials from flattened root canals.

Subjects and Methods:

Thirty-six similar flattened distal root canals of extracted human first lower molars were selected by micro-computed tomography (micro-CT) and then instrumented and filled. After the initial retreatment procedures, the residual volume of root canal filling materials was assessed by micro-CT (V1). Then, the specimens were divided into three groups (n. 12), according to the additional cleaning technique and submitted to another micro-CT scan (V2).

Statistical Analysis Used:

Analysis of variance and Games-Howell tests (P < 0.05).

Results:

The percentage reduction in the residual volume of root canal filling materials reached by PUI, EAS, and XPEFR was 28.38%, 28.12%, and 43.52%, respectively, considering the total space of the root canal (P > 0.05). In the apical third, these values were 20.05%, 21.54%, and 48.82% (P < 0.05).

Conclusions:

Additional cleaning techniques enabled removing a greater amount of root canal filling material from flattened distal root canals of extracted human first lower molars. Considering the total space of the root canal, there were no statistically relevant differences among the groups. In the apical third, XPEFR performed better.

Comparison of the efficacy of three different supplementary cleaning protocols in root-filled teeth with a bioceramic sealer after retreatment-a micro-computed tomographic study

OBJECTIVE

The present study evaluated the efficacy of three different supplementary cleaning protocols on the removal of bioceramic-based root canal filling materials from oval-shaped canals.

MATERIALS AND METHODS

A total of 36 human mandibular premolars were instrumented and obturated with gutta-percha and iRoot SP using the single-cone technique. Retreatment was performed with ProTaper Universal retreatment files. The samples were randomly divided into the following supplementary cleaning protocols: conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI), and XP-endo Finisher R (XPR). The samples underwent micro-CT scanning to quantify the amount of residual filling materials after retreatment and after performing the cleaning protocols. The volume of filling material removal was analyzed by one-way analysis of variance and post hoc Bonferroni and Games-Howell tests (P < 0.05).

RESULTS

There were significant differences in the amount of root canal filling material removal in every comparison group (P < 0.05). The XPR removed significantly more residual filling materials (P < 0.01) followed by PUI and CSI (P < 0.05). Similar efficacy was found in the total root canal and all root thirds.

CONCLUSIONS

The additional use of XP-endo Finisher R and passive ultrasonic irrigation effectively removed the bioceramic-obturated root filling materials from the oval-shaped canals. However, none of the techniques completely removed the filling materials.

CLINICAL RELEVANCE

The XP-endo Finisher R and passive ultrasonic irrigation exhibited greater efficacy compared with syringe irrigation in the reduction of residual filling materials after retreatment in root-filled teeth with a bioceramic sealer.

Impact of Endodontic Kinematics on Stress Distribution During Root Canal Treatment: Analysis of Photoelastic Stress

INTRODUCTION

Structural defects created by endodontic treatment are the most common cause of major dental failures. This study analyzed levels of stress produced by endodontic instruments during the root canal treatment by photoelastic analysis of stress.

METHODS

Twenty-four human premolars were randomly divided into 4 groups (n = 6) according to instrumentation protocol: ProTaper Next (GPT), One Shape (GOS), Wave One Gold (GWO), and TF Adaptive (GTF). The evaluation of the photoelastic model was performed at 4 dental zones: dental-crown region, cervical third of root, middle third of root, and apical third of root. Silicone molds were prepared (2 × 15 mm), and pinjets were used inside the root canals to fixate teeth. Photoelastic resin (2:1 ratio) was poured into the silicone molds to form photoelastic models. A transmission polariscope was used to analyze the positions of interest and recorded with a digital camera. Tardy's method was used to quantify the fringe order (n) and calculate the maximum stress value (τ) at each selected point. Data were analyzed with two-way analysis of variance, Tukey test (P < .05), fringe descriptive analysis.

RESULTS

All groups showed a significant increase in the level of stress created during biomechanical preparation of the root canals. In the quantitative analysis, there was no statistically significant difference among the groups (P > .05). In the qualitative analysis, GPT and GTF instruments achieved greater levels of stresses compared with GWO and GOS instruments. At the beginning of instrumentation, stresses were concentrated at the coronary level and the end of instrumentation at the middle and apical root level.

CONCLUSIONS

All endodontic systems resulted in accumulation of stress along the dental structure. Stress was found in different concentrations along the tooth and at different levels.

Influence of different calcium hydroxide removal protocols on the bond strength of epoxy resin-based sealer in long oval root canals

This study evaluated the effect of different protocols for Ca(OH)₂ removal on the bond strength (BS) of epoxy resin-based sealer in long oval root canals. Forty-eight mandibular incisors with long oval root canals were selected by CBCT. Biomechanical preparation was performed, the samples were filled with Ca(OH)₂ paste and distributed in four groups (n = 12): G-without Ca(OH)₂ paste (C); G2-syringe/needle (SN); G3-SN + XP-Endo® Finisher (XPF); G4-SN + passive ultrasonic irrigation (PUI). After 7 days, Ca(OH)₂ was removed and teeth were filled using AHPlus and guttapercha. In four samples from each group, the sealer was manipulated with 0.1% rhodamine to assess sealer penetration by fluorescent laser confocal microscopy (FLCM). Samples were sectioned in slices for BS, scanning electron microscopy, and FLCM analysis. The BS data were analyzed by ANOVA and Tukey tests (α = 0.05). The lowest BS values were found for the SN group (12.89 ± 4.36) compared to C (35.55 ± 10.05), while PUI group presented intermediate values (28.57 ± 9.35) and the XPF group (31.34 ± 9.8) showed values that were sometimes similar to C group and sometimes similar to PUI group (p > .05). The analysis of the adhesive interface showed evident gaps, with the presence of residues between the dentin and the filling material for the SN group, and for C, XPF and PUI groups juxtaposed adhesive interface. FLCM images showed sealer penetration in the dentinal tubules along the entire perimeter for C, XPF, and PUI groups. Ca(OH)₂ removal with XPF and PUI from long oval root canals resulted in higher bond strength values compared to SN, besides better sealer penetration on dentinal tubules and juxtaposed adhesive interface.