Investigation of High-Speed Erythrocyte Flow and Erythrocyte-Wall Impact in a Lab-on-a-Chip

Rheological Role of Stiff Nanorings on Concurrently Strengthening and Toughening Polymer Nanocomposites

Nanorings, which are increasingly uncovered in natural systems and synthesized in man-made materials, exhibit dynamics distinct from those known for linear chains. We show in this study that, when immersed in a polymer melt matrix, segments of a stiff nanoring (SNR) have more facilitated subdiffusion, i.e., with a larger scaling exponent in the mean squared displacement, than those belonging to one flexible counterpart, while the whole SNR is more suppressed by its surroundings. It is revealed that adding SNRs contributes to achieving the long-anticipated rheological objective of sol- and gel-like characteristics at high and low shearing frequencies, respectively. This study suggests the promising prospect of exploiting SNRs to concurrently strengthen and toughen target polymer nanocomposites.

Advances in Microfluidics for Single Red Blood Cell Analysis

The utilizations of microfluidic chips for single RBC (red blood cell) studies have attracted great interests in recent years to filter, trap, analyze, and release single erythrocytes for various applications. Researchers in this field have highlighted the vast potential in developing micro devices for industrial and academia usages, including lab-on-a-chip and organ-on-a-chip systems. This article critically reviews the current state-of-the-art and recent advances of microfluidics for single RBC analyses, including integrated sensors and microfluidic platforms for microscopic/tomographic/spectroscopic single RBC analyses, trapping arrays (including bifurcating channels), dielectrophoretic and agglutination/aggregation studies, as well as clinical implications covering cancer, sepsis, prenatal, and Sickle Cell diseases. Microfluidics based RBC microarrays, sorting/counting and trapping techniques (including acoustic, dielectrophoretic, hydrodynamic, magnetic, and optical techniques) are also reviewed. Lastly, organs on chips, multi-organ chips, and drug discovery involving single RBC are described. The limitations and drawbacks of each technology are addressed and future prospects are discussed.

Investigation of red blood cell partitioning in an in vitro microvascular bifurcation

There is a long history of research examining red blood cell (RBC) partitioning in microvasculature bifurcations. These studies commonly report results describing partitioning that exists as either regular partitioning, which occurs when the RBC flux ratio is greater than the bulk fluid flowrate ratio, or reverse partitioning when the RBC flux ratio is less than or equal to that of the bulk fluid flowrate. This paper presents a study of RBC partitioning in a single bifurcating microchannel with dimensions of 6 to 16 μm, investigating the effects of hematocrit, channel width, daughter channel flowrate ratio, and bifurcation angle. The erythrocyte flux ratio, N*, manifests itself as either regular or reverse partitioning, and time-dependent partitioning is much more dynamic, occurring as both regular and reverse partitioning. We report a significant reduction in the well-known sigmoidal variation of the erythrocyte flux ratio (N*) versus the volumetric flowrate ratio (Q*), partitioning behavior with increasing hematocrit in microchannels when the channel dimensions are comparable with cell size. RBCs "lingering" or jamming at the bifurcation were also observed and quantified in vitro. Results from trajectory analyses suggest that the RBC position in the feeder channel strongly affects both partitioning and lingering frequency of RBCs, with both being significantly reduced when RBCs flow on streamlines near the edge of the channel as opposed to the center of the channel. Furthermore, our experiments suggest that even at low Reynolds number, partitioning is affected by the bifurcation angle by increasing cell-cell interactions. The presented results provide further insight into RBC partitioning as well as perfusion throughout the microvasculature.

Artificial Organs 2016: A Year in Review

In this Editor's Review, articles published in 2016 are organized by category and briefly summarized. We aim to provide a brief reflection of the currently available worldwide knowledge that is intended to advance and better human life while providing insight for continued application of technologies and methods of organ Replacement, Recovery, and Regeneration. As the official journal of The International Federation for Artificial Organs, The International Faculty for Artificial Organs, the International Society for Mechanical Circulatory Support, the International Society for Pediatric Mechanical Cardiopulmonary Support, and the Vienna International Workshop on Functional Electrical Stimulation, Artificial Organs continues in the original mission of its founders "to foster communications in the field of artificial organs on an international level." Artificial Organs continues to publish developments and clinical applications of artificial organ technologies in this broad and expanding field of organ Replacement, Recovery, and Regeneration from all over the world. We were pleased to publish our second Virtual Issue in April 2016 on "Tissue Engineering in Bone" by Professor Tsuyoshi Takato. Our first was published in 2011 titled "Intra-Aortic Balloon Pumping" by Dr. Ashraf Khir. Other peer-reviewed Special Issues this year included contributions from the 11th International Conference on Pediatric Mechanical Circulatory Support Systems and Pediatric Cardiopulmonary Perfusion edited by Dr. Akif Ündar and selections from the 23rd Congress of the International Society for Rotary Blood Pumps edited by Dr. Bojan Biocina. We take this time also to express our gratitude to our authors for offering their work to this journal. We offer our very special thanks to our reviewers who give so generously of time and expertise to review, critique, and especially provide meaningful suggestions to the author's work whether eventually accepted or rejected. Without these excellent and dedicated reviewers the quality expected from such a journal could not be possible. We also express our special thanks to our Publisher, John Wiley & Sons for their expert attention and support in the production and marketing of Artificial Organs. We look forward to reporting further advances in the coming years.