Hernia

Development and validation of a high-quality simulator with exchangeable peritoneum for transabdominal preperitoneal laparoscopic inguinal hernia repair

INTRODUCTION

Practical simulation training with proper haptic feedback and the fragility of the human body is required to overcome the long learning curve associated with laparoscopic inguinal hernia repair (LIHR). However, few hernia models accurately reflect the texture and fragility of the human body. Therefore, in this study, we developed a novel model for transabdominal preperitoneal (TAPP) LIHR training and evaluated its validity.

METHODS

We developed a high-quality mock peritoneum with a hydrated polyvinyl alcohol layer and a unique two-way crossing cellulose fiber layer. To complete the simulation, the peritoneum was adhered to a urethane foam inguinal base with surgical landmarks. Participants could perform all the procedures required for the TAPP LIHR. Twenty-four surgeons performed TAPP LIHR simulation using a novel simulator. Their opinions were rated on a 5-point Likert scale. Additionally, 6 surgical residents and 10 surgical experts performed the procedure. Their performance was evaluated using the TAPP checklist score and procedure time.

RESULTS

Most participants strongly agreed that the TAPP LIHR simulator with an exchangeable peritoneum model was useful. The participants agreed on the model fidelity for tactile sensation, forceps handling, and humanlike anatomy. In comparisons between surgical residents and experts, the experts had significantly higher scores (10.6 vs. 17.2, p < 0.05) and shorter procedure times (92.3 vs. 55.9 min; p < .05) than did surgical residents.

CONCLUSIONS

We developed a high-quality exchangeable peritoneal model that mimics the human peritoneum's texture and fragility. This model enhances laparoscopic simulation training, potentially shortening TAPP LIHR learning curves.

Preliminary results of robotic inguinal hernia repair following its introduction in a single-center trial

AIM

Robotic surgery using the da Vinci system has markedly increased worldwide. However, robotic inguinal hernia repair remains unpopular outside the United States. We introduced and evaluated a robotic transabdominal preperitoneal repair (R-TAPP) technique for inguinal hernia in our hospital.

METHODS

First, we designed a task protocol according to the surgical results of 388 laparoscopic TAPP (L-TAPP) procedures performed during the 4 years prior to introducing R-TAPP. Our task protocol included several time limitations during a step-wise procedure: creating the peritoneal flap (<60 minutes), mesh placement with fixation (<30 minutes), and peritoneal suture closure (<30 minutes) under experienced supervision. We investigated the preliminary clinical results of R-TAPP performed by a single operator between December 2018 and January 2020.

RESULTS

We identified 27 lesions in 20 patients (unilateral in 13 and bilateral in seven). According to the Japan Hernia Society Classification, our cohort included eight type I, five type II, and seven bilateral hernias (nine type I, four type II, and one type IV). The median operation time was 124 minutes (range, 81-164 minutes), and the median console operation time was 85 minutes (range, 50-132). The median time required for the peritoneal incision was 30 minutes (range, 18-54 minutes), that for mesh placement (including tucking) was 13 minutes (range, 7-27 minutes), and that for peritoneal suturing was 9 minutes (range, 3-20 minutes).

CONCLUSION

Our preliminary results suggest that our task protocol for R-TAPP is feasible. However, refinement of our task protocol is essential for standardization.

Single-incision laparoscopic totally extraperitoneal repair for bilateral inguinal hernias after femoral-femoral artery bypass in a patient on antiplatelet therapy: A case report

A 77-year-old man visited our hospital due to bilateral painful inguinal swellings. He had a history of femoral-femoral artery bypass surgery for peripheral artery disease and took ethyl icosapentate. Additionally, he had a previous history of open left colectomy for descending colon cancer and had a median incision reaching the lower abdomen. With a diagnosis of bilateral direct inguinal hernias after femoral-femoral artery bypass surgery, he underwent single-incision laparoscopic surgery for totally extraperitoneal repair, continuing on ethyl icosapentate. During surgery, the preperitoneal space was safely and easily dissected, avoiding a subcutaneous vascular graft. No perioperative complications or hernia recurrence have been observed at 3 months follow-up.

Needlescopic herniorrhaphy using one umbilical 5-mm trocar and two lateral 3-mm trocars: A case series

INTRODUCTION

Laparoscopic surgery has become a standard treatment for inguinal hernia, with it recently being characterized by the use of smaller instruments. However, reports on needlescopic transabdominal preperitoneal repair using one umbilical 5-mm and two lateral 3-mm trocars are extremely rare.

METHODS

Seven patients with unilateral inguinal hernia underwent this surgical procedure. A 5-mm trocar was inserted from the umbilical and two 3-mm trocars were inserted from the lateral. After dissection of the preperitoneal layer, a mesh was fixed using a tucker inserted from the umbilical 5-mm trocar while viewing through the 3-mm optics from the lateral trocar.

RESULTS

All procedures were completed without intraoperative complications and conversion to the conventional method. The surgical results of our needlescopic TAPP repair have been shown to not be inferior to those of the conventional method.

CONCLUSION

Our needlescopic herniorrhaphy using one umbilical 5-mm trocar and two lateral 3-mm trocars is minimally invasive hernia repair.

Usefulness of a novel, slim long syringe-like device for applying surgical mesh through a 5-mm trocar

We developed a device for introducing surgical mesh through a 5-mm trocar during transabdominal preperitoneal hernia repair. This device is like a slim long syringe; it has a polypropylene outer sheath (outer diameter, 5.8 mm; inner diameter, 5.6 mm; length, 2500 mm) and inner rod, and is made in a similar manner to a drinking straw. Therefore, the manufacturing costs are low. To use the device, folded mesh is placed inside it with a grasper before surgery. The device is then inserted through the trocar, and the mesh is pushed out by the inner rod and applied. The folded mesh extrudes smoothly pubis side to lateral side along the inguinal curve. It reinforces the area without any contamination and expands in a manner that makes it easy for the surgeon to place and fix the mesh. Our device allows mesh to be applied smoothly, comfortably, and economically, and it may reduce the risk of infection.

Bilateral inguinal hernia after axillary-femoral artery bypass effectively treated with laparoscopic repair: A case report

We report herein our experience with bilateral inguinal hernia surgery for a patient who had previously undergone a Y-shaped vascular graft for an abdominal aortic aneurysm and then right axillary-bilateral femoral artery bypass surgery. Preoperative physical examination and imaging revealed a subcutaneous vascular graft passing from the right axilla through the right flank region and branching at the lower abdomen to reach the femoral areas on both sides. As repair surgery by inguinal incision was considered difficult, we performed laparoscopic surgery. Bilateral direct hernia was observed on intraperitoneal observation. Essentially no intraperitoneal organ adhesion to the abdominal wall was present, and the previous surgery was also confirmed not to have reached the inguinal preperitoneal space. Transabdominal preperitoneal repair was therefore performed, yielding favorable results.