Effectiveness of Autologous Platelet Concentrates in the Sinus Lift Surgery: Findings from Systematic Reviews and Meta-Analyses

Maxillary sinus augmentation is one of the most predictable procedures for the rehabilitation of the posterior maxilla. The current overview aimed to summarize the findings provided by systematic reviews (SRs) and meta-analyses on the effectiveness of autologous platelet concentrates (APCs) in sinus lift and to assess the methodological quality of the included SRs. Three electronic databases have been explored. SRs and meta-analyses addressing the effectiveness of APCs in sinus lift technique were included. Clinical, radiographic and histomorphometric findings were considered for APCs as solely grafting materials and APCs in combination with biomaterials. Outcomes were implant survival rate (ISR), implant stability (IS), implant failure (IF), postoperative complications, histomorphometric findings, radiographic bone gain, bone volume and bone density. The methodological quality of the included SRs was assessed using the updated version of "A Measurement Tool to Assess Systematic Review" (AMSTAR-2). Thirty SRs were included. The methodological quality of the included reviews ranged from critically low (3 studies) to high (9 studies). The included SRs showed favorable clinical outcomes, short-term new bone formation and no biological complications when APCs were used both as solely graft material or in combination with other biomaterials. However, no significant additional effects in the long-term period were observed. APCs did not add any further positive effects compared to the physiological healing derived by the natural blood clot. The current overview of SRs highlighted the need for high-quality SRs evaluating the role of APCs in sinus lift though network meta-analyses, in order to identify the most powerful material for sinus lift augmentation. The use of APCs improves the healing of soft tissues and the postoperative quality of life in the short-term period. Thus, its application can be recommended.

Polydopamine-Functionalized Strontium Alginate/Hydroxyapatite Composite Microhydrogel Loaded with Vascular Endothelial Growth Factor Promotes Bone Formation and Angiogenesis

Critical-size bone defects are a common and intractable clinical problem that typically requires filling in with surgical implants to facilitate bone regeneration. Considering the limitations of autologous bone and allogeneic bone in clinical applications, such as secondary damage or immunogenicity, injectable microhydrogels with osteogenic and angiogenic effects have received considerable attention. Herein, polydopamine (PDA)-functionalized strontium alginate/nanohydroxyapatite (Sr-Alg/nHA) composite microhydrogels loaded with vascular endothelial growth factor (VEGF) were prepared using microfluidic technology. This composite microhydrogel released strontium ions stably for at least 42 days to promote bone formation. The PDA coating can release VEGF in a controlled manner, effectively promote angiogenesis around bone defects, and provide nutritional support for new bone formation. In in vitro experiments, the composite microhydrogels had good biocompatibility. The PDA coating greatly improves cell adhesion on the composite microhydrogel and provides good controlled release of VEGF. Therefore, this composite microhydrogel effectively promotes osteogenic differentiation and vascularization. In in vivo experiments, composite microhydrogels were injected into critical-size bone defects in the skull of rats, and they were shown by microcomputed tomography and tissue sections to be effective in promoting bone regeneration. These findings demonstrated that this novel microhydrogel effectively promotes bone formation and angiogenesis at the site of bone defects.

Bone Tissue Engineering (BTE) of the Craniofacial Skeleton, Part I: Evolution and Optimization of 3D-Printed Scaffolds for Repair of Defects

Bone tissue regeneration is a complex process that proceeds along the well-established wound healing pathway of hemostasis, inflammation, proliferation, and remodeling. Recently, tissue engineering efforts have focused on the application of biological and technological principles for the development of soft and hard tissue substitutes. Aim is directed towards boosting pathways of the healing process to restore form and function of tissue deficits. Continued development of synthetic scaffolds, cell therapies, and signaling biomolecules seeks to minimize the need for autografting. Despite being the current gold standard treatment, it is limited by donor sites' size and shape, as well as donor site morbidity. Since the advent of computer-aided design/computer-aided manufacturing (CAD/CAM) and additive manufacturing (AM) techniques (3D printing), bioengineering has expanded markedly while continuing to present innovative approaches to oral and craniofacial skeletal reconstruction. Prime examples include customizable, high-strength, load bearing, bioactive ceramic scaffolds. Porous macro- and micro-architecture along with the surface topography of 3D printed scaffolds favors osteoconduction and vascular in-growth, as well as the incorporation of stem and/or other osteoprogenitor cells and growth factors. This includes platelet concentrates (PCs), bone morphogenetic proteins (BMPs), and some pharmacological agents, such as dipyridamole (DIPY), an adenosine A 2A receptor indirect agonist that enhances osteogenic and osteoinductive capacity, thus improving bone formation. This two-part review commences by presenting current biological and engineering principles of bone regeneration utilized to produce 3D-printed ceramic scaffolds with the goal to create a viable alternative to autografts for craniofacial skeleton reconstruction. Part II comprehensively examines recent preclinical data to elucidate the potential clinical translation of such 3D-printed ceramic scaffolds.

Three-Dimensional Printing Bioceramic Scaffolds Using Direct-Ink-Writing for Craniomaxillofacial Bone Regeneration

Defects characterized as large osseous voids in bone, in certain circumstances, are difficult to treat, requiring extensive treatments which lead to an increased financial burden, pain, and prolonged hospital stays. Grafts exist to aid in bone tissue regeneration (BTR), among which ceramic-based grafts have become increasingly popular due to their biocompatibility and resorbability. BTR using bioceramic materials such as β-tricalcium phosphate has seen tremendous progress and has been extensively used in the fabrication of biomimetic scaffolds through the three-dimensional printing (3DP) workflow. 3DP has hence revolutionized BTR by offering unparalleled potential for the creation of complex, patient, and anatomic location-specific structures. More importantly, it has enabled the production of biomimetic scaffolds with porous structures that mimic the natural extracellular matrix while allowing for cell growth-a critical factor in determining the overall success of the BTR modality. While the concept of 3DP bioceramic bone tissue scaffolds for human applications is nascent, numerous studies have highlighted its potential in restoring both form and function of critically sized defects in a wide variety of translational models. In this review, we summarize these recent advancements and present a review of the engineering principles and methodologies that are vital for using 3DP technology for craniomaxillofacial reconstructive applications. Moreover, we highlight future advances in the field of dynamic 3D printed constructs via shape-memory effect, and comment on pharmacological manipulation and bioactive molecules required to treat a wider range of boney defects.

Tissue Engineering Supporting Regenerative Strategies to Enhance Clinical Orthodontics and Dentofacial Orthopaedics: A Scoping, Perspective Review

The personalized regenerative therapeutic strategies applicable in the structural and functional repair of maxillofacial/dental defects are expected to extend beyond the limits of what is currently possible in the management of dentofacial anomalies and treating malocclusions. The application of undifferentiated stem cells (SCs), including signaling molecule control and individualized tissue engineering based on targeted therapies, has been proposed to overcome therapeutic limitations and complications associated with treatments for craniofacial defects, including severe orthodontic discrepancies. This scoping, prospective review discusses comprehensively the current knowledge and prospects for improving clinical outcomes by the application of novel cell-required and cell-free regenerative strategies in biomedicine. The existing evidence, although scant, suggests that patients receiving an orthodontic treatment could benefit from precise tissue augmentation, allowing enhancement of tooth movement generated by orthognathic forces; faster, more predictable alignment of dental arches; optimal management of periodontal complications; and prevention of external root resorption. Ultimately, enriching orofacial tissues and “customizing” the repair of congenital/acquired defects in the craniofacial region can be vastly enhanced to provide a positive therapeutic outcome and improve patients’ quality of life.

Clinical and patient-reported outcomes of tissue engineering strategies for periodontal and peri-implant reconstruction

Scientific advancements in biomaterials, cellular therapies, and growth factors have brought new therapeutic options for periodontal and peri-implant reconstructive procedures. These tissue engineering strategies involve the enrichment of scaffolds with living cells or signaling molecules and aim at mimicking the cascades of wound healing events and the clinical outcomes of conventional autogenous grafts, without the need for donor tissue. Several tissue engineering strategies have been explored over the years for a variety of clinical scenarios, including periodontal regeneration, treatment of gingival recessions/mucogingival conditions, alveolar ridge preservation, bone augmentation procedures, sinus floor elevation, and peri-implant bone regeneration therapies. The goal of this article was to review the tissue engineering strategies that have been performed for periodontal and peri-implant reconstruction and implant site development, and to evaluate their safety, invasiveness, efficacy, and patient-reported outcomes. A detailed systematic search was conducted to identify eligible randomized controlled trials reporting the outcomes of tissue engineering strategies utilized for the aforementioned indications. A total of 128 trials were ultimately included in this review for a detailed qualitative analysis. Commonly performed tissue engineering strategies involved scaffolds enriched with mesenchymal or somatic cells (cell-based tissue engineering strategies), or more often scaffolds loaded with signaling molecules/growth factors (signaling molecule-based tissue engineering strategies). These approaches were found to be safe when utilized for periodontal and peri-implant reconstruction therapies and implant site development. Tissue engineering strategies demonstrated either similar or superior clinical outcomes than conventional approaches for the treatment of infrabony and furcation defects, alveolar ridge preservation, and sinus floor augmentation. Tissue engineering strategies can promote higher root coverage, keratinized tissue width, and gingival thickness gain than scaffolds alone can, and they can often obtain similar mean root coverage compared with autogenous grafts. There is some evidence suggesting that tissue engineering strategies can have a positive effect on patient morbidity, their preference, esthetics, and quality of life when utilized for the treatment of mucogingival deformities. Similarly, tissue engineering strategies can reduce the invasiveness and complications of autogenous graft-based staged bone augmentation. More studies incorporating patient-reported outcomes are needed to understand the cost-benefits of tissue engineering strategies compared with traditional treatments.

Use of Leukocyte-PlateletRich Fibrin in Conservative Management of Odontogenic Keratocyst: A Case Report

A 29-year-old female patient was referred to the Department of Oral and Maxillofacial Surgery in Taleghani Hospital of Shahid Beheshti University of Medical Science, Tehran, Iran, in 2019, complaining of increased volume and pain in the posterior mandibular region. Cone-beam computed tomography and multislice computed tomography were performed, and an incisional biopsy was done. The histopathologic examination confirmed the diagnosis of Odontogenic Keratocyst (OKC). Surgical treatment was performed with marsupialization. After a year of follow-up, the resultant small-sized cyst was curetted, and Leukocyte-PlateletRich Fibrin (LPRF) was placed in the bony depression. The significant healing of the lesion was noted on regular follow-up visits with complete resolution at 15 months. This report showed that the application of LPRF might accelerate the healing of soft tissues and bone regeneration with no inhibitory effect on the natural healing process.

Application of biomolecules modification strategies on PEEK and its composites for osteogenesis and antibacterial properties

As orthopedic and dental implants, polyetheretherketone (PEEK) is expected to be a common substitute material of titanium (Ti) and its alloys due to its good biocompatibility, chemical stability, and elastic modulus close to that of bone tissue. It could avoid metal allergy and bone resorption caused by the stress shielding effect of Ti implants, widely studied in the medical field. However, the lack of biological activity is not conducive to the clinical application of PEEK implants. Therefore, the surface modification of PEEK has increasingly become one of the research hotspots. Researchers have explored various biomolecules modification methods to effectively enhance the osteogenic and antibacterial activities of PEEK and its composites. Therefore, this review mainly summarizes the recent research of PEEK modified by biomolecules and discusses the further research directions to promote the clinical transformation of PEEK implants.

Sinus Lift Associated with Leucocyte-Platelet-Rich Fibrin (Second Generation) for Bone Gain: A Systematic Review

The purpose of this systematic review was to analyze sinus lifting procedures and to compare the efficiency of this treatment associated with the second generation of platelet-rich fibrin related to its effects on bone gain and to clarify the regenerative efficacy in sinus lift procedure, whether alone or as a coadjutant to other bone graft materials. The PICOT question was, “In clinical studies with patients needing a maxillary sinus lift (P), does the use of PRF either alone (I) or in conjunction with other biomaterials (C) improve the clinical outcome associated with bone gain and density (O), with at least three months of follow-up (T)?” An electronic search was conducted in the MEDLINE (PubMed), Science Direct, and Scopus databases through a search strategy. A total of 443 articles were obtained from the electronic database search. Sixteen articles met all criteria and were included in this review. Within the limitation of this study and interpreting the results carefully, it was suggested that a higher risk for implant failure after a sinus elevation might be seen in patients with residual bone ≤4 mm, and PRF application was effective, suggesting reducing the time needed for new bone formation.

Dimensional and histomorphometric evaluation of biomaterials used for alveolar ridge preservation: a systematic review and network meta-analysis

OBJECTIVES

This systematic review and network meta-analysis aimed to answer to the following questions: (a) In patients undergoing alveolar ridge preservation after tooth extraction, which grafting material best attenuates horizontal and vertical ridge resorption, as compared to spontaneous healing?, and (b) which material(s) promotes bone formation in the extraction socket?

MATERIALS AND METHODS

The MEDLINE, SCOPUS, CENTRAL, and EMBASE databases were screened in duplicate for RCTs up to March 2021. Two independent authors extracted the data and assessed the risk of bias of the included studies. Primary outcomes were ridge horizontal and vertical dimension changes and new bone formation into the socket. Both pairwise and network meta-analysis (NMA) were undertaken to obtain estimates for primary outcomes and compare different grafting materials.

RESULTS

Eighty-eight RCTs were included, with a total of 2805 patients and 3073 sockets. Overall, a total of 1740 sockets underwent alveolar ridge preservation with different materials (1432 were covered by a membrane). Pairwise meta-analysis showed that, as compared to spontaneous healing, all materials statistically significantly reduced horizontal and vertical shrinkage. According to the multidimensional scale ranking of the NMA, xenografts (XG) and allografts (AG), alone or combined with bioactive agents (Bio + AG), were the most predictable materials for horizontal and vertical ridge dimension preservation, while platelet concentrates performed best in the percentage of new bone formation.

CONCLUSIONS

Alveolar ridge preservation is effective in reducing both horizontal and vertical shrinkage, as compared to untreated sockets. NMA confirmed the consistency of XG for ridge dimension preservation, but several other materials and combinations like AG, Bio + AG, and AG + alloplasts, produced even better results than XG in clinical comparisons. Further evidence is needed to confirm the value of such alternatives to XG for alveolar ridge preservation. Bio + AG performed better than the other materials in preserving ridge dimension and platelet concentrates in new bone formation. However, alloplasts, xenografts, and AG + AP performed consistently good in majority of the clinical comparisons.

CLINICAL RELEVANCE

XG and Bio + AG demonstrated significantly better performance in minimizing post-extraction horizontal and vertical ridge dimension changes as compared with other grafting materials or with spontaneous healing, even if they presented the worst histological outcomes. Allografts and other materials or combinations (AG + AP) presented similar performances while spontaneous healing ranked last.

The use of rhBMP2 for augmentation of established horizontal/vertical defects may require additional use of rhVEGF to achieve significant bone regeneration: An in vivo experimental study

AIM

To test the hypothesis that the use of rhBMP2 in established defects requires additional growth factors such as rhVEGF to accomplish effective bone repair.

MATERIALS AND METHODS

Horizontal/vertical defects of 2 cm length and 1 cm height were created bilaterally in the alveolar crest of the maxillae of 18 minipigs together with the extraction of all premolar teeth and one molar tooth on both sides. After 3 months of healing, defects were augmented with 0.5 g particulate PDLLA/CaCO3 composite loaded with 400 µg rhBMP2/50 µg rhVEGF165 on one side and 800 µg rhBMP2 on the other in 12 test animals, whereas defects in six control animals were sham operated and left unfilled on one side and augmented with blank carriers on the other. After 4 and 13 weeks, the animals were evaluated each for area of new bone formation (mm²) and bone density (area %).

RESULTS

Augmentations with carriers loaded with 800 g µrhBMP2 failed to induce significantly more bone than in the augmentations with unloaded carrier after 4 and 13 weeks (p = .1000, p = .381). Augmentations with carriers loaded with 400 µg rhBMP2 and 50 µg erhVEGF165 resulted in significantly increased bone formation after 13 weeks (p = .024) compared to blank carriers. Soft tissue in augmentations with combined rhBMP2/rhVEGF165 loading exhibited numerous microvessels compared to soft tissue in augmentations with rhBMP2.

CONCLUSIONS

It is concluded that effective bone regeneration in augmentations of established alveolar ridge defects may require the application of rhVEGF additionally to rhBMP2.

A retrospective preliminary histomorphometric and clinical investigation on sinus augmentation using enzyme-deantigenic, collagen-preserving equine bone granules and plasma rich in growth factors

Background

Enzyme-deantigenic equine bone (EDEB) is a substitute of autogenous bone. Mixing it with plasma rich in growth factors (PRGF) seems a viable option to achieve enhanced bone formation in alveolar bone augmentation surgeries. This retrospective study aims to first report the histomorphometric and clinical outcomes achieved when using the EDEB/PRGF mixture for performing sinus augmentation procedures followed by delayed implant placement.

Materials and methods

Records of 11 patients who underwent 14 sinus augmentation surgeries using EDEB/PRGF followed by delayed implant placement were retrospectively collected and analyzed to assess histomorphometric data concerning newly formed bone (NFB) and residual biomaterial (RB) recorded at implant placement, marginal bone loss (MBL) values of implants placed in the augmented sinuses, and implant and prosthetic success and survival rates.

Results

At 5.6 ± 1.1 months after grafting, NFB and RB were 34.0 ± 9.1% and 11.3 ± 2.2% respectively, and no histologic signs of inflammation or immune reaction were observed in any of the 34 bone biopsies being collected. Further, 86.5 ± 4.3 months after implant placement, MBL was 0.40 ± 0.07 mm. No implant or prosthesis failed, and the implant success and survival rates were 100%

Conclusions

Within the limitations of the present study, grafting EDEB/PRGF for lateral sinus augmentation and delayed implant placement seems to be safe. Compared to published data concerning EDEB alone, results of the present study do not suggest that the EDEB/PRGF combination may provide a histomorphometric or medium-/long-term clinical advantage.

Growth Factors in Oral Tissue Engineering: New Perspectives and Current Therapeutic Options

The present investigation is aimed at systematically analyzing the recent literature about the innovative scaffold involved in the reconstructive surgeries by applying growth factors and tissue engineering. An extensive review of the contemporary literature was conducted according to the PRISMA guidelines by accessing the PubMed, Embase, and Scopus Elsevier databases. Authors performed the English language manuscript research published from 2003 to 2020. A total of 13 relevant studies were included in the present review. The present systematic review included only papers with significant results about correlation between scaffold, molecular features of growth factor, and reconstructive surgeries in oral maxillofacial district. The initial research with filters recorded about 1023 published papers. Beyond reading and considering of suitability, only 42 and then 36 full-text papers were recorded for the revision. All the researches recorded the possibility of using growth factors on rebuilding atrophic jaws. Different growth factors like morphogenetic factors, cytokines, and inflammatory ones and their application over different scaffold materials were recorded. Further investigations should be required in order to state scientific evidence about a clear advantage of applying tissue engineering for therapeutic purpose.

GDF-5 induces epidermal stem cell migration via RhoA-MMP9 signalling

The migration of epidermal stem cells (EpSCs) is critical for wound re-epithelization and wound healing. Recently, growth/differentiation factor-5 (GDF-5) was discovered to have multiple biological effects on wound healing; however, its role in EpSCs remains unclear. In this work, recombinant mouse GDF-5 (rmGDF-5) was found via live imaging in vitro to facilitate the migration of mouse EpSCs in a wound-scratch model. Western blot and real-time PCR assays demonstrated that the expression levels of RhoA and matrix metalloproteinase-9 (MMP9) were correlated with rmGDF-5 concentration. Furthermore, we found that rmGDF-5 stimulated mouse EpSC migration in vitro by regulating MMP9 expression at the mRNA and protein levels through the RhoA signalling pathway. Moreover, in a deep partial-thickness scald mouse model in vivo, GDF-5 was confirmed to promote EpSC migration and MMP9 expression via RhoA, as evidenced by the tracking of cells labelled with 5-bromo-2-deoxyuridine (BrdU). The current study showed that rmGDF-5 can promote mouse EpSC migration in vitro and in vivo and that GDF-5 can trigger the migration of EpSCs via RhoA-MMP9 signalling.

PRP in wound healing applications

Platelets play a crucial role in hemostasis, tissue regeneration and host defense. Based on these settings, platelet-rich plasma (PRP) and its derivatives are therapeutically used to promote wound healing in several scenarios. This review summarizes the biological mechanisms underlying the most traditional as well as innovative applications of PRP in wound healing. These mechanisms involve the combined action of platelet-derived growth factors and cytokines, together with the role of plasma-derived fibrillar, antioxidant and homeostatic factors. In addition, regenerative treatments with PRP consist of personalized and non-standardized methods. Thus, the quality of PRP varies depending on endogenous factors (e.g., age; gender; concomitant medication; disease-associated systemic factors; nutrition) and exogenous factors (anticoagulants and cellular composition). This review also analyses whether these factors affect the biological mechanisms of PRP in wound healing applications.

The Influence of Residual Alveolar Bone Height on Graft Composition after Maxillary Sinus Augmentation Using Two Different Xenografts: A Histomorphometric Comparative Study

AIM

To evaluate the hypothesis of a correlation between the preoperative residual alveolar bone height (RBH) and graft maturation after maxillary sinus floor augmentation procedures using two different bone substitutes.

METHODS

A total of 20 patients who underwent unilateral maxillary sinus floor augmentation with either mineralized deproteinized bovine bone (DBBM) or a xenograft enriched with polymer and gelatin (NBS) were included in this prospective study. Six months after sinus surgery, bone biopsies were harvested with a 3.2 mm diameter trephine bur, prior to dental implant placement. Histomorphometric analysis was performed, and the results were correlated with the individual RBH. Implants were loaded after 5 months of insertion, and 1-year implant success and marginal bone level change were assessed.

RESULTS

RBH was 2.17 ± 1.11 mm (range 0.5-3.5 mm) and 2.14 ± 0.72 mm (range 0.5-3.0 mm) in the NBS and DBBM group, respectively. The biopsy analyses for the DBBM group showed woven bone increases by 5.08% per 1-mm increment of RBH; medullary spaces decreased by 9.02%, osteoid decreased by 4.4%, residual biomaterial decreased by 0.34%, and lamellar bone increased by 5.68% per 1-mm increase of RBH. In the NBS group, samples showed woven bone increases by 8.08% per 1-mm increase of RBH; medullary spaces decreased by 0.38%; osteoid increased by 1.34%, residual biomaterial decreased by 0.58%, and lamellar bone decreased by 5.50% per 1-mm increase of RBH. There was no statistically significant difference in the correlation between RBH and lamellar bone, woven bone, and osteoid, independently of the material used. Implant success was 100% in both groups, and marginal bone loss was 1.02 ± 0.42 mm in DBBM and 0.95 ± 0.31 mm in the NBS group after the 1-year follow-up.

CONCLUSION

In spite of the absence of significance, the observed trend for woven bone to increase and medullary spaces to decrease when RBH increases deserves attention. Residual bone dimension might be a determinant in the bone graft maturation after maxillary sinus augmentation.

Clinical Application of Concentrated Growth Factor Fibrin Combined With Bone Repair Materials in Jaw Defects

PURPOSE

We investigated the promoting effect of concentrated growth factor (CGF) fibrin on the repair of jaw bone defects.

PATIENTS AND METHODS

We designed a clinical trial composed of patients with jaw defects. Forty patients were divided into the test and control groups. CGF fibrin combined with Bio-Oss bone powder (Giestlich Pharma, Wolhusen, Switzerland) was used in the test group. Bio-Oss bone powder alone was used in the control group. The concentration of vascular endothelial growth factor (VEGF) and transforming growth factor (TGF)-β in the red blood cell (RBC) layer and CGF gel was measured. At different time points before and after surgery, the serum bone alkaline phosphatase (BAP), osteocalcin, and bone mineral density levels were measured. Regular examinations and computed tomography scans were also performed in the follow-up period.

RESULTS

The CGF fibrin available for clinical use was obtained by centrifugation. One day after preparation by centrifugation, the VEGF and TGF-β concentration in the CGF gel was 2.57-fold and 3.4-fold greater than the concentration in the RBC layer, respectively. The BAP and osteocalcin levels increased at 1 and 12 weeks postoperatively in both groups. Furthermore, the BAP and osteocalcin levels in the test group were significantly greater than those in the control group at 1 and 12 weeks postoperatively (P < .05 for all). The bone mineral density in the bone defect area of the test group was also significantly greater than that of the control group at 6 months postoperatively (P < .05). Evaluation of the regular radiographic scans revealed that the effects in the test group were better than those in the control group.

CONCLUSIONS

CGF fibrin could promote new bone formation in jaw defects, with benefit to the healing of bone tissue and, thus, is a promising bone repair material.

Immediate reconstruction of mandibular defect after treatment of medication-related osteonecrosis of the jaw (MRONJ) with rhBMP-2/ACS and miniplate: Review of 3 cases

•

The pathogenesis of MRONJ is related to repression of osteoclast mediated bone remodeling.

•

rhBMP-2 can stimulate not only osteoblasts but also osteoclasts and induce new bone formation.

•

ACS has been proved to be a good carrier of rhBMP-2 with maximal efficacy.

•

Application of rhBMP-2/ACS can be a new approach to surgical treatment for MRONJ patients.

Introduction

The purpose of this study was to pursue, and to report the results of, mandibular reconstruction and rehabilitation of medication-related osteonecrosis of the jaw (MRONJ) patients having large critical-sized defects of the mandible using a combination of recombinant human bone morphogenetic protein-2 (rhBMP-2) and absorbable collagen sponge (ACS) with surgical miniplate without any grafting materials.

Case presentation

Three (3) patients aged 67 and 86 (2 patients) presented due to discomfort on the mandible. They all had a medical history of bisphosphonate and steroids treatment orally or intravenously, and all had been diagnosed as MRONJ stage 3. Sequestrectomy and saucerization were performed, and then a surgical miniplate (Hansolmedical, Korea) was adapted and fixed on the sound portion of the mandible. rhBMP-2 was loaded onto an ACS at a dose of 1.5 mg/cc. Several rhBMP-2 (Cowellmedi, Korea)/ACS (Ateloplug, TRMkorea, Korea) were placed into the bony defect with a surgical miniplate. All 3 patients recovered without complications. They all exhibited radiographic evidence of bone formation by 3 months postoperatively in every case.

Conclusions

All 3 patients were treated successfully with rhBMP-2/ACS and miniplate without any complications. This protocol reported herein represents a new approach to the surgical treatment of maxillofacial bone defects and deficiencies, especially in MRONJ patients.

Risk factors in bone augmentation procedures

Bone augmentation is an extremely common procedure in implant dentistry today because of significant advancements with reactive biomaterials, a better understanding of the mechanism of action that is found with growth factors contained in platelets, and improvements in surgical techniques. The expectation is for the surgeon to place the dental implant in the position that best serves the requirements of the prosthetic restorations. With the increasing demands that patients have for ideal prosthetic results, surgeons are expected to predictably augment both hard and soft tissues to provide the anticipated esthetic and functional outcomes. Bone grafting can be performed before, during, and after the implant placement; however, these augmentation procedures come with increased cost, the risk of complications such as infection or failure, and lengthening of the total treatment time. In addition, a plethora of grafting materials are available commercially, where they are often inadequately studied, or there is minimal information regarding their predictability or long-term success, or ability to support dental implants. It is clear that although the surgical field has seen major progress since early implant surgical techniques in the 1980s, major challenges still exist with hard tissue augmentation procedures. This review will discuss these challenges that are increased and often specific to bone graft healing, and which are becoming more common as implant site development often requires bone augmentation to improve volume or contour deficiencies. The risk factors that patients may present with that will affect outcomes with bone augmentation procedures are identified, and recommendations for the prevention of complications or managing complications once they have occurred are provided.

Experimental study of the synergistic effect and network regulation mechanisms of an applied combination of BMP-2, VEGF, and TGF-β1 on osteogenic differentiation

The study aimed to explore the osteogenic effect induced by the combined use of bone morphogenetic protein-2 (BMP-2), vascular endothelial growth factor (VEGF), and transforming growth factor-β1 (TGF-β1), attain the best combination for osteogenic quality and efficiency, and explore the network regulation mechanisms of induced osteogenesis. MC3T3-E1 cells were cultured in vitro, and BMP-2, VEGF, and TGF β1 were added to osteogenic induction mediums in different combinations to conduct experiments. At 7 and 14 days, the alkaline phosphatase (ALP) and Alizarin Red S (ARS) staining of the applied BMP-2 and VEGF combination were deeper and the quantitative analysis were higher than those of the other groups. After optimizing the time-effect relationship of the combined application, with BMP-2, VEGF, and TGF-β1 adding in the early stage and BMP-2 and VEGF adding in the late, the ALP and ARS staining of these groups were deeper and the quantitative analyses were meaningfully higher than the BMP-2 and VEGF combination group at 7 and 14 days. The expression of the RUNX2 gene and the Smad1 signaling pathway in the optimized combination group was also significantly higher. The results demonstrate that the combination of BMP-2, VEGF, and TGF-β1 applied according to the time-effect relationship can significantly promote osteogenic differentiation mainly through the classical BMP-receptor-Smad signal pathway.

The effect of autologous leukocyte platelet rich fibrin on the rate of orthodontic tooth movement: A prospective randomized clinical trial

Objective:

The aim of this study was to evaluate the effect of LPRF, placed in extraction sockets, on orthodontic tooth movement (OTM).

Materials and Methods:

Thirty extraction sockets from eight patients (five males, three females, with a mean age of 17.37 years; range 12–25 years) requiring extraction of first premolars based on their orthodontic treatment plan participated in this split-mouth clinical trial. In one randomly selected quadrant of each jaw, the extraction socket was preserved as the experimental group by immediate placement of LPRF in the extraction socket. The other quadrant served as the control group for secondary healing. Immediately, the teeth adjacent to the defects were pulled together by a NiTi closed-coil spring with constant force. A piece of 0.016 × 0.022-inch stainless steel wire was used as the main arch wire. The amount of OTM was measured on the study casts at eight time points with 2-week intervals for 3 months. Analysis of random effect model was performed for the purpose of comparison between the experimental and control groups.

Results:

According to the random effect model, a statistically significant difference was found between the experimental and control group in rate of OTM (P = 0.006).

Conclusion:

According to the results, application of LPRF, as an interdisciplinary approach combining orthodontics and surgery, may accelerate OTM, particularly in extraction cases.

Regenerative Effect of Platelet Concentrates in Oral and Craniofacial Regeneration

Platelet concentrates (PCs) are biological autologous products derived from the patient's whole blood and consist mainly of supraphysiologic concentration of platelets and growth factors (GFs). These GFs have anti-inflammatory and healing enhancing properties. Overall, PCs seem to enhance bone and soft tissue healing in alveolar ridge augmentation, periodontal surgery, socket preservation, implant surgery, endodontic regeneration, sinus augmentation, bisphosphonate related osteonecrosis of the jaw (BRONJ), osteoradionecrosis, closure of oroantral communication (OAC), and oral ulcers. On the other hand, no effect was reported for gingival recession and guided tissue regeneration (GTR) procedures. Also, PCs could reduce pain and inflammatory complications in temporomandibular disorders (TMDs), oral ulcers, and extraction sockets. However, these effects have been clinically inconsistent across the literature. Differences in study designs and types of PCs used with variable concentration of platelets, GFs, and leucocytes, as well as different application forms and techniques could explain these contradictory results. This study aims to review the clinical applications of PCs in oral and craniofacial tissue regeneration and the role of their molecular components in tissue healing.

Autologous Fibrin Glue With Collagen Carrier During Maxillary Sinus Lift Procedure

This study aimed to describe the use of autologous fibrin glue (AFG) with a collagen carrier during maxillary sinus lift procedures with immediate implants during 3 years of follow-up. Twelve patients who had lost their teeth in the region associated to maxillary sinus, with a bone remnant 3 to 5 mm in height, were selected to perform a maxillary sinus augmentation with AFG and collagen membrane, placing the implant immediately. After 5 months, the implants were connected and rehabilitated. The patients were followed-up for a 3-year period, being evaluated every 6 months. At the end of the 3-year follow-up period, 100% implant success was observed, with a mean of bone augmentation of 7.75 mm. Three maxillary sinus membranes were perforated and healed by using AFG and collagen membrane without identify any complication during the follow-up period. Finally, the use of collagen carrier combined with AFG as a filling material during the maxillary sinus lift procedure may be a low-cost and reliable alternative that allows bone formation.

[Recent research advances on alveolar ridge preservation after tooth extraction]

Resorption of alveolar bone that occurs following tooth extraction is irreversible, it may compromise the restoration of implants or conventional prostheses. Ridge preservation can minimize ridge resorption after tooth extraction. In this article, healing features of socket after tooth extraction, factors influencing ridge remodeling, and the use of bioma-terials were reviewed.

Wnt11 promotes BMP9-induced osteogenic differentiation through BMPs/Smads and p38 MAPK in mesenchymal stem cells

Bone morphogenetic protein 9 (BMP9), as one of the most potent osteogenic factors, is a promising cytokine for bone tissue engineering. Wnt11 can regulate the development of the skeletal system and is related to high bone mass syndrome. However, the effect of Wnt11 on BMP9-induced osteogenic differentiation remains unknown. In this study, we investigated the relationship between Wnt11- and BMP9-induced osteogenic differentiation in mesenchymal stem cells (MSCs). We recapitulated the osteogenic potential of BMP9 in C3H10T1/2 cells. The messenger RNA expression of Wnt11 is detectable in the available progenitor cells, and BMP9 can obviously increase the protein level of Wnt11 in these cells. Exogenous Wnt11 potentiates the effect of BMP9 on increasing alkaline phosphatase (ALP) activities, the expression of osteopontin (OPN), and Runt-related transcription factor 2 (Runx2), so does matrix mineralization in C3H10T1/2 cells. Although Wnt11 cannot increase the BMP9-induced ectopic bone formation, it can increase the bone density induced by BMP9 apparently. Wnt11 increases the level of p-Smad1/5/8, as well as p-p38. Meanwhile, Wnt11 promotes the effect of BMP9 on increasing the levels of p-Smad1/5/8 and p-p38. Inhibition of p38 decreases the BMP9-induced ALP activities, the expression of OPN, and the mineralization in C3H10T1/2 cells. However, all of these effects of the p38 inhibitor on BMP9-induced osteogenic markers can be almost reversed by the overexpression of Wnt11. Our findings suggested that Wnt11 can enhance the osteogenic potential of BMP9 in MSCs, and this effect may be partly mediated through enhancing BMPs/Smads and the p38 MAPK signal, which was induced by BMP9.

Bone Regeneration of Peri-Implant Defects Using a Collagen Membrane as a Carrier for Recombinant Human Bone Morphogenetic Protein-2

This study is designed to determine the effect of collagen membrane (CM) soaked with bone morphogenetic protein-2 (rhBMP-2) for the treatment of peri-implant dehiscence defects. Material and Methods. Three treatment groups were allocated at each defect in 5 dogs: (i) collagenated synthetic bone (OC) and CM soaked with rhBMP-2 (BMP group), (ii) OC and CM soaked with saline (nonBMP group), and (iii) no further treatment (control group). Titanium pins were used to stabilize the membranes in two dogs. Radiographic and histomorphometric analyses were performed 4 weeks later. Results. The median augmented volumes were 4.27 mm³, 6.24 mm³, and 2.75 mm³ in the BMP, nonBMP, and control groups, respectively; the corresponding median first bone-to-implant contact (fBIC) distances were 3.25 mm, 3.08 mm, and 2.56 mm (P > 0.05). The placement of pins (with the BMP and nonBMP groups pooled) significantly improved bone regeneration: the augmented volumes were 17.60 mm³ with pins and 3.68 mm³ without pins (P = 0.024), with corresponding fBIC distances of 2.25 mm and 3.31 mm, respectively (P < 0.001). Conclusions. The addition of rhBMP-2 to CM failed to improve bone regeneration of peri-implant dehiscence defects compared to using an unsoaked CM after 4 weeks. However, the stabilization of CMs using pins positively influenced the outcomes.

Maxillary Sinus Augmentation for Dental Implant Rehabilitation of the Edentulous Ridge: A Comprehensive Overview of Systematic Reviews

OBJECTIVES

The objective of this systemic review was to perform a comprehensive overview of systematic reviews and meta-analyses of the maxillary sinus augmentation procedure for implant rehabilitation in humans. The following were evaluated in this overview: (1) anatomic variables affecting sinus augmentation, (2) histomorphometric analysis of the grafted sinus, (3) volumetric changes after sinus grafting, and (4) implant survival beyond 1 year.

MATERIAL AND METHODS

Electronic databases were searched for systematic reviews and meta-analyses of implant-related sinus augmentation published from 1976 to September 2015. The studies selected must identify itself as a systemic review or meta-analysis in the title or abstract and must pertain to sinus augmentation.

RESULTS

Thirty-three publications fulfilled the review criteria. The AMSTAR ratings for the 33 chosen reviews scored greater than 3 of 11, with 8 reviews scoring greater or equal to 8 of 11.

CONCLUSION

The outcome of this overview suggested that the following will increase the success of sinus augmentation and survival of implants placed in the grafted sinus: (1) the use of barrier membranes over the lateral window when using a lateral approach to graft the sinus, (2) the use of particulate autogenous bone with or without other substitute graft materials, (3) sinus augmentation without the use of grafting materials may be considered provided that the space between the sinus membrane and floor can be maintained, (4) the use of rough-surfaced implants, (5) simultaneous implant placement with residual bone height greater than 4 mm, and (6) the cessation of smoking.

Scaffold-Based Temporomandibular Joint Tissue Regeneration in Experimental Animal Models: A Systematic Review

Reconstruction of degenerated temporomandibular joint (TMJ) structures remains a clinical challenge. Tissue engineering (TE) is a promising alternative to current treatment options, where the TMJ is either left without functional components, or replaced with autogenous, allogeneic, or synthetic grafts. The objective of this systematic review was to answer the focused question: in experimental animal models, does the implantation of biomaterial scaffolds loaded with cells and/or growth factors (GFs) enhance regeneration of the discal or osteochondral TMJ tissues, compared with scaffolds alone, without cells, or GFs? Following PRISMA (Preferred Reporting Items for Systematic reviews and Meta-Analysis) guidelines, electronic databases were searched for relevant controlled preclinical in vivo studies. Thirty studies reporting TMJ TE strategies in both small (rodents, rabbits; n = 25) and large animals (dogs, sheep, goats; n = 5) reporting histological and/or radiographic outcomes were included. Twelve studies reported ectopic (subcutaneous) implantation models in rodents, whereas 18 studies reported orthotopic, surgically induced defect models in large animals. On average, studies presented with an unclear-to-high risk of bias. In most studies, mesenchymal stem cells or chondrocytes were used in combination with either natural or synthetic polymer scaffolds, aiming for either TMJ disc or condyle regeneration. In summary, the overall preclinical evidence (ectopic [n = 6] and orthotopic TMJ models [n = 6]) indicate that addition of chondrogenic and/or osteogenic cells to biomaterial scaffolds enhances the potential for TMJ tissue regeneration. Standardization of animal models and quantitative outcome evaluations (biomechanical, biochemical, histomorphometric, and radiographic) in future studies, would allow more reliable comparisons and increase the validity of the results.

Autologous Periosteum-Derived Micrografts and PLGA/HA Enhance the Bone Formation in Sinus Lift Augmentation

Sinus lift augmentation is a procedure required for the placement of a dental implant, whose success can be limited by the quantity or quality of available bone. To this purpose, the first aim of the current study was to evaluate the ability of autologous periosteum-derived micrografts and Poly(lactic-co-glycolic acid) (PLGA) supplemented with hydroxyl apatite (HA) to induce bone augmentation in the sinus lift procedure. Secondly, we compared the micrograft's behavior with respect to biomaterial alone, including Bio-Oss® and PLGA/HA, commercially named Alos. Sinus lift procedure was performed on 24 patients who required dental implants and who, according to the study design and procedure performed, were divided into three groups: group A (Alos + periosteum-derived micrografts); group B (Alos alone); and group C (Bio-Oss® alone). Briefly, in group A, a small piece of periosteum was collected from each patient and mechanically disaggregated by Rigenera® protocol using the Rigeneracons medical device. This protocol allowed for the obtainment of autologous micrografts, which in turn were used to soak the Alos scaffold. At 6 months after the sinus lift procedure and before the installation of dental implants, histological and radiographic evaluations in all three groups were performed. In group A, where sinus lift augmentation was performed using periosteum-derived micrografts and Alos, the bone regeneration was much faster than in the control groups where it was performed with Alos or Bio-Oss® alone (groups B and C, respectively). In addition, the radiographic evaluation in the patients of group A showed a radio-opacity after 4 months, while after 6 months, the prosthetic rehabilitation was improved and was maintained after 2 years post-surgery. In summary, we report on the efficacy of periosteum-derived micrografts and Alos to augment sinus lift in patients requiring dental implants. This efficacy is supported by an increased percentage of vital mineralized tisssue in the group treated with both periosteum-derived micrografts and Alos, with respect to the control group of Alos or Bio-Oss® alone, as confirmed by histological analysis and radiographic evaluations at 6 months from treatment.

Release of VEGF from Dental Implant Improves Osteogenetic Process: Preliminary In Vitro Tests

Introduction: During osseointegration process, the presence of an inflammatory event could negatively influence the proper osteogenetic ability of the implant surface. In order to reduce this possibility, an implementation of angiogenetic event through the release of Vascular Endothelial Growth Factor (VEGF) can be a tool as co-factor for osteoblastic differentiation. In this paper, novel dental implant surfaces enriched with VEGF have been tested. Material and methods: The ability of VEGF-enriched titanium implants to improve the osteogenetic properties of Mesenchymal stem cells (MSC), also in the presence of an inflammatory environment, have been in vitro tested. Molecular biology, morphological analyses, and biochemical tests have been performed in order to confirm biological properties of these surfaces. Results: Our results confirm that the presence of VEGF onto the implant surface is able not only to protect the cells from in vitro aging and from Reactive Oxygen Species (ROS) damage, but it also improves their osteogenic and endothelial differentiation, even in the presence of inflammatory cytokines. Conclusion: This study establishes a biologically powerful novel tool that could enhance bone repair in dental implant integration.

Basic Principles of Bioengineering and Regeneration

In a quest to provide best-quality treatment, results, and long-term prognosis, physicians must be well versed in emerging sciences and discoveries to more favorably provide suitable options to patients. Bioengineering and regeneration have rapidly developed, and with them, the options afforded to surgeons are ever-expanding. Grafting techniques can be modified according to evolving knowledge. The basic principles of bioengineering are discussed in this article to provide a solid foundation for favorable treatment and a comprehensive understanding of the reasons why each particular treatment available can be the most adequate for each particular case.

Virtual Surgery Planning and Three-Dimensional Printing Template to Customize Bone Graft Toward Implant Insertion

Premaxillary tooth loss and bone deficiency or atrophy often occur in facial trauma. Onlay bone graft and implants have so far been the best means of restoring function and esthetic appearance. Void space between the graft and the jaw bone, over projection and mucosal trauma can cause mucosal dehiscence, bone exposure, or resorption and can compromise implant survival. Virtual surgical planning using 3-dimensional printing technology has improved the efficiency of craniofacial surgery. The drawbacks of this technology are its cost and time-consuming preparation. However, the democratization of high-performance 3-dimensional printing and open-source software have enabled surgeons to master the procedure. The authors applied this innovative technology to customize bone graft for insertion of a premaxillary implant. It enabled us to custom-make the bone graft on the template and to perfectly embed the graft in the gap with a reduce operating time and a good osteointegration.

Cell Cotransplantation Strategies for Vascularized Craniofacial Bone Tissue Engineering: A Systematic Review and Meta-Analysis of Preclinical In Vivo Studies

The regenerative potential of tissue-engineered bone constructs may be enhanced by in vitro coculture and in vivo cotransplantation of vasculogenic and osteogenic (progenitor) cells. The objective of this study was to systematically review the literature to answer the focused question: In animal models, does cotransplantation of osteogenic and vasculogenic cells enhance bone regeneration in craniofacial defects, compared with solely osteogenic cell-seeded constructs? Following PRISMA (Preferred Reporting Items for Systematic Reviews and Meta-Analyses) guidelines, electronic databases were searched for controlled animal studies reporting cotransplantation of endothelial cells (ECs) with mesenchymal stem cells (MSCs) or osteoblasts in craniofacial critical size defect (CSD) models. Twenty-two studies were included comparing outcomes of MSC/scaffold versus MSC+EC/scaffold (co)transplantation in calvarial (n = 15) or alveolar (n = 7) CSDs of small (rodents, rabbits) and large animal (minipigs, dogs) models. On average, studies presented with an unclear to high risk of bias. MSCs were derived from autologous, allogeneic, xenogeneic, or human (bone marrow, adipose tissue, periosteum) sources; in six studies, ECs were derived from MSCs by endothelial differentiation. In most studies, MSCs and ECs were cocultured in vitro (2-17 days) before implantation. Coculture enhanced MSC osteogenic differentiation and an optimal MSC:EC seeding ratio of 1:1 was identified. Alloplastic copolymer or composite scaffolds were most often used for in vivo implantation. Random effects meta-analyses were performed for histomorphometric and radiographic new bone formation (%NBF) and vessel formation in rodents' calvarial CSDs. A statistically significant benefit in favor of cotransplantation versus MSC-only transplantation for radiographic %NBF was observed in rat calvarial CSDs (weighted mean difference 7.80% [95% confidence interval: 1.39-14.21]); results for histomorphometric %NBF and vessel formation were inconclusive. Overall, heterogeneity in the meta-analyses was high (I² > 80%). In summary, craniofacial bone regeneration is enhanced by cotransplantation of vasculogenic and osteogenic cells. Although the direction of treatment outcome is in favor of cotransplantation strategies, the magnitude of treatment effect does not seem to be of relevance, unless proven otherwise in clinical studies.

Effect of Blood Component Coatings of Enosseal Implants on Proliferation and Synthetic Activity of Human Osteoblasts and Cytokine Production of Peripheral Blood Mononuclear Cells

The study monitored in vitro early response of connective tissue cells and immunocompetent cells to enosseal implant materials coated by different blood components (serum, activated plasma, and plasma/platelets) to evaluate human osteoblast proliferation and synthetic activity and inflammatory response presented as a cytokine profile of peripheral blood mononuclear cells (PBMCs) under conditions imitating the situation upon implantation. The cells were cultivated on coated Ti-plasma-sprayed (Ti-PS), Ti-etched (Ti-Etch), Ti-hydroxyapatite (Ti-HA), and ZrO₂ surfaces. The plasma/platelets coating supported osteoblast proliferation only on osteoconductive Ti-HA and Ti-Etch whereas activated plasma enhanced proliferation on all surfaces. Differentiation (BAP) and IL-8 production remained unchanged or decreased irrespective of the coating and surface; only the serum and plasma/platelets-coated ZrO₂ exhibited higher BAP and IL-8 expression. RANKL production increased on serum and activated plasma coatings. PBMCs produced especially cytokines playing role in inflammatory phase of wound healing, that is, IL-6, GRO-α, GRO, ENA-78, IL-8, GM-CSF, EGF, and MCP-1. Cytokine profiles were comparable for all tested surfaces; only ENA-78, IL-8, GM-CSF, and MCP-1 expression depended on materials and coatings. The activated plasma coating led to uniformed surfaces and represented a favorable treatment especially for bioinert Ti-PS and ZrO₂ whereas all coatings had no distinctive effect on bioactive Ti-HA and Ti-Etch.

A systematic review and meta-analysis on the influence of biological implant surface coatings on periimplant bone formation

This systematic review and meta-analysis evaluated the influence of biological implant surface coatings on periimplant bone formation in comparison to an uncoated titanium reference surface in experimental large animal models. The analysis was structured according to the PRISMA criteriae. Of the1077 studies, 30 studies met the inclusion criteriae. Nineteen studies examined the bone implant contact (BIC) and were included in the meta-analysis. Overall, the mean increase in BIC for the test surfaces compared to the reference surfaces was 3.7 percentage points (pp) (95% CI -3.9-11.2, p = 0.339). Analyzing the increase in BIC for specific coated surfaces in comparison to uncoated reference surfaces, inorganic surface coatings showed a significant mean increase in BIC of 14.7 pp (95% CI 10.6-18.9, p < 0.01), extracellular matrix (ECM) surface coatings showed an increase of 10.0 pp (95% CI 4.4-15.6, p < 0.001), and peptide coatings showed a statistical trend with 7.1 pp BIC increase (95% CI -0.8-15.0, p = 0.08). In this review, no statistically significant difference could be found for growth factor surface coatings (observed difference -3.3 pp, 95% CI -16.5-9.9, p = 0.6). All analyses are exploratory in nature. The results show a statistically significant effect of inorganic and ECM coatings on periimplant bone formation. © 2016 Wiley Periodicals, Inc. J Biomed Mater Res Part A: 104A: 2898-2910, 2016.

Mechanical properties of bone tissues surrounding dental implant systems with different treatments and healing periods

OBJECTIVES

The objective of the current study was to examine whether the nanoindentation parameters can assess the alteration of bone quality resulting from different degrees of bone remodeling between bone tissue ages around the dental implant interface with different treatments and healing periods.

MATERIALS AND METHODS

Dental implants were placed in mandibles of six male dogs. Treatment groups included: resorbable blast media-treated titanium (Ti) implants, alumina-blasted zirconia implants (ATZ), alumina-blasted zirconia implants applied with demineralized bone matrix (ATZ-D), and alumina-blasted zirconia implants applied with rhBMP-2 (ATZ-B). Nanoindentation modulus (E), hardness (H), viscosity (η), and viscoelastic creep (Creep/P _max) were measured for new and old bone tissues adjacent to the implants at 3 and 6 weeks of post-implantation. A total of 945 indentations were conducted for 32 implant systems.

RESULTS

Significantly lower E, H, and η but higher Creep/P _max were measured for new bone tissues than old bone tissues, independent of treatments at both healing periods (p < 0.001). All nanoindentation parameters were not significantly different between healing periods (p > 0.568). ATZ-D and ATZ-B implants had the stiffer slope of correlation between E and Creep/P _max of the new bone tissue than Ti implant (p < 0.039).

CONCLUSIONS

Current results indicated that, in addition to elastic modulus and plastic hardness, measurement of viscoelastic properties of bone tissue surrounding the implant can provide more detailed information to understand mechanical behavior of an implant system.

CLINICAL RELEVANCE

Ability of energy absorption in the interfacial bone tissue can play a significant role in the long-term success of a dental implant system.

Bone morphogenetic protein signaling in bone homeostasis

Bone morphogenetic proteins (BMPs) are cytokines belonging to the transforming growth factor-β (TGF-β) superfamily. They play multiple functions during development and tissue homeostasis, including regulation of the bone homeostasis. The BMP signaling pathway consists in a well-orchestrated manner of ligands, membrane receptors, co-receptors and intracellular mediators, that regulate the expression of genes controlling the normal functioning of the bone tissues. Interestingly, BMP signaling perturbation is associated to a variety of low and high bone mass diseases, including osteoporosis, bone fracture disorders and heterotopic ossification. Consistent with these findings, in vitro and in vivo studies have shown that BMPs have potent effects on the activity of cells regulating bone function, suggesting that manipulation of the BMP signaling pathway may be employed as a therapeutic approach to treat bone diseases. Here we review the recent advances on BMP signaling and bone homeostasis, and how this knowledge may be used towards improved diagnosis and development of novel treatment modalities. This article is part of a Special Issue entitled "Muscle Bone Interactions".

Bone Tissue Engineering Challenges in Oral & Maxillofacial Surgery

Over the past decades, there has been a substantial amount of innovation and research into tissue engineering and regenerative approaches for the craniofacial region. This highly complex area presents many unique challenges for tissue engineers. Recent research indicates that various forms of implantable biodegradable scaffolds may play a beneficial role in the clinical treatment of craniofacial pathological conditions. Additionally, the direct delivery of bioactive molecules may further increase de novo bone formation. While these strategies offer an exciting glimpse into potential future treatments, there are several challenges that still must be overcome. In this chapter, we will highlight both current surgical approaches for craniofacial reconstruction and recent advances within the field of bone tissue engineering. The clinical challenges and limitations of these strategies will help contextualize and inform future craniofacial tissue engineering strategies.

Bone formation with deproteinized bovine bone mineral or biphasic calcium phosphate in the presence of autologous platelet lysate: comparative investigation in rabbit

Bone substitutes alone or supplemented with platelet-derived concentrates are widely used to promote bone regeneration but their potency remains controversial. The aim of this study was, therefore, to compare the regenerative potential of preparations containing autologous platelet lysate (APL) and particles of either deproteinized bovine bone mineral (DBBM) or biphasic calcium phosphate (BCP), two bone substitutes with different resorption patterns. Rabbit APL was prepared by freeze-thawing a platelet suspension. Critical-size defects in rabbit femoral condyle were filled with DBBM or DBBM+APL and BCP or BCP+APL. Rabbits were sacrificed after six weeks and newly formed bone and residual implanted material were evaluated using nondemineralized histology and histomorphometry. New bone was observed around particles of all fillers tested. In the defects filled with BCP, the newly formed bone area was greater (70%; P < 0.001) while the residual material area was lower (60%; P < 0.001) than that observed in those filled with DBBM. New bone and residual material area of defects filled with either APL+DBBM or APL+BCP were similar to those observed in those filled with the material alone. In summary, osteoconductivity and resorption of BCP were greater than those of DBBM, while APL associated with either DBBM or BCP did not have an additional benefit.

Current concepts: tissue engineering and regenerative medicine applications in the ankle joint

Tissue engineering and regenerative medicine (TERM) has caused a revolution in present and future trends of medicine and surgery. In different tissues, advanced TERM approaches bring new therapeutic possibilities in general population as well as in young patients and high-level athletes, improving restoration of biological functions and rehabilitation. The mainstream components required to obtain a functional regeneration of tissues may include biodegradable scaffolds, drugs or growth factors and different cell types (either autologous or heterologous) that can be cultured in bioreactor systems (in vitro) prior to implantation into the patient. Particularly in the ankle, which is subject to many different injuries (e.g. acute, chronic, traumatic and degenerative), there is still no definitive and feasible answer to ‘conventional’ methods. This review aims to provide current concepts of TERM applications to ankle injuries under preclinical and/or clinical research applied to skin, tendon, bone and cartilage problems. A particular attention has been given to biomaterial design and scaffold processing with potential use in osteochondral ankle lesions.