Long-Term Outcomes of Early Loading of Straumann Implant-Supported Fixed Segmented Bridgeworks in Edentulous Maxillae: A 10-Year Prospective Study

Survival and complication rates of two dental implant systems supporting fixed restorations: 10-year data of a randomized controlled clinical study

OBJECTIVES

To compare clinical, radiographic, biological and technical long-term outcomes of two types of dental implants over a period of 10 years.

MATERIALS AND METHODS

Ninety-eight implants were placed in 64 patients, randomly allocated to one of two manufacturers (AST and STM). All implants were loaded with fixed restorations. Outcome measures were assessed at implant insertion (Ti), at baseline examination (TL), at 1, 3, 5, 8 and 10 (T10) years. Data analysis included survival, bone level changes, complications and clinical measures.

RESULTS

Re-examination was performed in 43 patients (23 AST and 20 STM) at 10 years. The implant level analysis was based on 37 (AST) and 32 (STM) implants. Survival rates of 100% were obtained for both groups. The median changes of the marginal bone levels between baseline and T10 (the primary endpoint) amounted to a loss of 0.07 mm for group AST and a gain of 0.37 mm for group STM (intergroup p = 0.008). Technical complications occurred in 27.0% of the implants in group AST and in 15.6% in group STM. The prevalence of peri-implant mucositis was 29.7% (AST) and 50.1% (STM). The prevalence of peri-implantitis amounted to 0% (AST) and 6.3% (STM).

CONCLUSIONS

Irrespective of the implant system used, the survival rates after 10 years were high. Minimal bone level changes were observed, statistically significant but clinically negligible in favor of STM. Technical complications were more frequently encountered in group AST, while group STM had a higher prevalence of peri-implant mucositis.

A preclinical study comparing single- and double-root 3D-printed Ti-6Al-4V implants

Recently, double-root implants have been investigated using 3D-printed technology. Here, we investigated damping capacity, microcomputed tomographic (micro-CT) and histological analyses of double-root 3D-printed implants compared with single-root 3D printed implants. Single- and double-root 3D-printed implants were fabricated and placed at both sides of mandibular third and fourth premolars in four beagle dogs. The damping capacity was measured, and periapical X-rays were taken every 2 weeks for 12 weeks. The bone volume/tissue volume (BV/TV) and bone mineral density (BMD) around the implants were measured with micro-CT. Bone-to-implant contact (BIC) and bone area fraction occupancy (BAFO) were measured in histological samples. The implant stability values between the groups were not significantly different, except at 4 and 12 weeks. The marginal bone changes were similar at the mesial and distal areas between the groups. The BV/TV and BMD values of the double-root 3D-printed implants showed no statistical difference through micro-CT analysis, but the double-root 3D-printed implants showed lower BIC and BAFO values through histomorphometric analysis compared to the single-root 3D-printed implants. Compared to single-root implants, 3D-printed double-root implants demonstrated comparable stability and bone remodeling around the fixtures, but the statistically significant bone loss in the furcation area remains problematic.

Effects of Dental Implants and Nutrition on Elderly Edentulous Subjects: Protocol for a Factorial Randomized Clinical Trial

Background

Loss of masticatory function consequent to tooth loss has been associated with changes in food choices and insufficient nutritional intake. To date, interventions based on dental prostheses alone did not significantly improve nutrient intake. Pilot studies have shown positive impacts of interventions combining implant-supported fixed dental prosthesis with brief dietary advice. The relative contribution and the potential synergy of the components of such interventions need to be determined as it has major public health implications for the community-dwelling aging population that continues to disproportionately suffer from tooth loss and its consequences.

Objective

To assess the effect of rehabilitation of masticatory function with fixed implant supported dentures and nutrition education in older subjects with terminal dentition (stage IV periodontitis) or full edentulism.

Methods

A 2 × 2 factorial randomized controlled trial with 16-month follow-up of eligible adults (≥60 years) with loss of masticatory function consequent to full arch edentulism or terminal dentition (n = 120) will be conducted to test whether the rehabilitation of masticatory function with fixed implant supported dentures, nutrition education and/or their combination improves intake of fresh fruits and vegetables for aging subjects. The study has been designed to detect changes in fresh fruits and fresh vegetables intake at 4 months using the 24-h dietary recall method. Changes in protein as percentage of total energy, nutritional biomarkers, plasma metabolomics, oral and gut microbiome, quality of life and masticatory function will also be assessed.

Discussion

We hypothesize that receiving rehabilitation of masticatory function with fixed implant dentures together with nutrition education is the most effective intervention for improving nutrient intake in aging community-dwelling subjects with extensive tooth loss. The results of this study will assist in designing better treatment regimens, guide medical care for individual subjects, and inform public health and policy.

Clinical Trials Registration

NCT05334407.

Randomized controlled clinical study comparing two types of two‐piece dental implants supporting fixed restorations – results at 8 years of loading

Objectives

To assess clinical, technical, biological, and radiographic outcomes of implants supporting fixed restorations using two types of dental implants with non‐matching implant–abutment junctions at 8 years.

Materials and methods

Sixty‐four patients were randomly assigned to receive one of two implant systems (S1 or S2) and eventually fixed restorations. Patients were examined at loading (T_L), one (T₁), three (T₃), five (T₅), and eight years (T₈). Outcome measures included implant and restoration survival, technical and biological complications, and radiographic bone levels. All data were analyzed on the implant and patient level.

Results

Ninety‐eight implants were inserted in 64 patients and loaded with fixed restorations. At 8 years, 49 patients with 42 (S1) and 36 (S2) implants (25 in group S1 and 24 in group S2 on the patient level) were re‐examined. The survival rates on the patient level were 97.6% (S1) and 97.2% (S2). The marginal bone levels (the primary endpoint) amounted to a gain of 0.21 mm (Q1: −0.11 mm; Q3: 0.5 mm) (S1) (p = .007) and to a loss of 0.24 mm (Q1: −0.79 mm; Q3: 0.05 mm) (S2) (p = .001) between baseline (T_L) and T₈ (intergroup p < .001). The technical complication rates were 28% (S1) and 12.5% (S2) (intergroup p = .289). Peri‐implant mucositis was observed in 24% (S1) and 50% (S2) of the implants on the patient level (intergroup p = .792). The respective figures for peri‐implantitis were 0% (S1) and 12.5% (S2) (intergroup p = .11).

Conclusions

Dental implants with non‐matching implant–abutment junctions supporting fixed restorations resulted in high survival rates independent of the system used. Differences, mainly observed in terms of technical complications (in favor of S2), biological complications (in favor of S1), and marginal bone‐level changes (in favor of group S1), appear to be clinically negligible.

A randomized clinical study to compare implant stability and bone loss using early loading protocol in two implant systems with different design

Aims

The study compared changes in implant stability and bone loss of implants with different designs using early loading at 6 weeks.

Setting and Design

In vivo-comparative study.

Materials and Methods

Forty subjects were selected and divided randomly by sealed envelope method in Group X and Group A for early loading for missing single posterior tooth in mandible. Implants in Group X had flared crest module and buttress thread design, whereas implants in Group A had parallel crest module and V-shaped thread design. All subjects were evaluated by Ostell for implant stability at the interval of baseline, 6 weeks, 3 months, and 6 months. ImageJ software was used for measurement of crestal bone loss in intraoral periapical radiographs at the interval of 6 weeks, 3 months, and 6 months.

Statistical Analysis Used

Unpaired t test, repeated ANOVA, Tukey post hoc test.

Results

The mean bone loss values of Group X at predetermined interval were 1.51 ± 0.20 mm, 2.11 ± 0.21 mm and 2.13 ± 0.21 mm. The mean bone loss values of Group A were 1.79 ± 0.16 mm, 2.92 ± 0.23 mm and 2.95 ± 0.23 mm. The mean bone loss was statistical significant (P < 0.05) at 6 weeks, 3 months and 6 months. It was highly significant in Group A at 6 months (P < 0.001).

Conclusions

It was concluded that Group X implants design showed better implant stability and less bone loss when compared to Group A implants design.

Trabeculae microstructure parameters serve as effective predictors for marginal bone loss of dental implant in the mandible

Marginal bone loss (MBL) is one of the leading causes of dental implant failure. This study aimed to investigate the feasibility of machine learning (ML) algorithms based on trabeculae microstructure parameters to predict the occurrence of severe MBL. Eighty-one patients (41 severe MBL cases and 40 normal controls) were involved in the current study. Four ML models, including support vector machine (SVM), artificial neural network (ANN), logistic regression (LR), and random forest (RF), were employed to predict severe MBL. The area under the receiver operating characteristic (ROC) curve (AUC), sensitivity, and specificity were used to evaluate the performance of these models. At the early stage of functional loading, severe MBL cases showed a significant increase of structure model index and trabecular pattern factor in peri-implant alveolar bone. The SVM model exhibited the best outcome in predicting MBL (AUC = 0.967, sensitivity = 91.67%, specificity = 100.00%), followed by ANN (AUC = 0.928, sensitivity = 91.67%, specificity = 93.33%), LR (AUC = 0.906, sensitivity = 91.67%, specificity = 93.33%), RF (AUC = 0.842, sensitivity = 75.00%, specificity = 86.67%). Together, ML algorithms based on the morphological variation of trabecular bone can be used to predict severe MBL.

Complications of Fixed Full-Arch Implant-Supported Metal-Ceramic Prostheses

We aimed to assess the biological and mechanical-technical complications and survival rate of implants of full-arch metal-ceramic prostheses, during five years of follow-up. 558 implants (of three different brands) retaining 80 full-arch metal-ceramic prostheses were placed in 65 patients, all of whom were examined annually for biological and mechanical-technical complications during the five years of follow-up. Descriptive statistics and univariate logistic regression were calculated. The cumulative survival rate of the implants was 99.8%, and 98.8% prosthesis-based. Mucositis was the most frequent of the biological complications and peri-implantitis was recorded as 13.8% at restoration-level, 16.9% at patient level and 2.0% at implant level. An implant length greater than 10 mm was shown to be a protective factor against biological complications. The mechanical-technical complications were associated with implant diameter, abutment/implant connection and retention system. Loss of screw access filling was the most frequent prosthetic complication, followed by the fracture of the porcelain. Full-arch metal-ceramic prostheses show a high prevalence of implant and prosthesis survival, with few biological and mechanical-technical complications.

On the Cleanliness of Different Oral Implant Systems: A Pilot Study

(1) Background: This paper aimed to compare the cleanliness of clinically well-documented implant systems with implants providing very similar designs. The hypothesis was that three well-established implant systems from Dentsply Implants, Straumann, and Nobel Biocare were not only produced with a higher level of surface cleanliness but also provided significantly more comprehensive published clinical documentation than their correspondent look-alike implants from Cumdente, Bioconcept, and Biodenta, which show similar geometry and surface structure. (2) Methods: Implants were analyzed using SEM imaging and energy-dispersive X-ray spectroscopy to determine the elemental composition of potential impurities. A search for clinical trials was carried out in the PubMed database and by reaching out to the corresponding manufacturer. (3) Results: In comparison to their corresponding look-alikes, all implants of the original manufacturers showed—within the scope of this analysis—a surface free of foreign materials and reliable clinical documentation, while the SEM analysis revealed significant impurities on all look-alike implants such as organic residues and unintended metal particles of iron or aluminum. Other than case reports, the look-alike implant manufacturers provided no reports of clinical documentation. (4) Conclusions: In contrast to the original implants of market-leading manufacturers, the analyzed look-alike implants showed significant impurities, underlining the need for periodic reviews of sterile packaged medical devices and their clinical documentation.

Complications and survival rates of 55 metal-ceramic implant-supported fixed complete-arch prostheses: A cohort study with mean 5-year follow-up

STATEMENT OF PROBLEM

Long-term outcomes with metal-ceramic (MC) implant-supported fixed complete dental prostheses (IFCDPs) are scarce.

PURPOSE

The purpose of this retrospective study was to assess the rate of biologic and technical complications in a cohort of edentulous patients treated with MC IFCDPs by residents after a mean clinical follow-up of 5 years (range: 1 to 12 years).

MATERIAL AND METHODS

Forty-one participants with 55 MC IFCDPs underwent a single-visit comprehensive examination that included a medical and dental history review and clinical and radiographic examinations. All supporting implants and prostheses were examined for biologic and technical complications. Life table analysis and Kaplan-Meier survival curves were calculated.

RESULTS

Of 359 moderately rough surface dental implants, 2 had failed in 1 patient after 11 years of functional loading, yielding a cumulative implant survival rate of 99.4%. Owing to the implant failure, 1 of 55 edentulous arches restored with IFCDPs failed, yielding a cumulative prosthesis survival rate of 98.2% after mean observation period of 5.0 years. Soft tissue recession was the most frequent minor biologic complication (annual rate 7.8% at the prosthesis level) for both cement and screw-retained IFCDPs (group C and S), and peri-implantitis (annual rate 1.6% at the implant level) the most frequent major biologic complication. Wear of porcelain (annual rate 8.0% at the prosthesis level) was the most frequent minor technical complication for both groups, and fracture of porcelain (annual rate 0.8% at the dental-unit level) was the most frequent major technical complication. Minor complications were the most frequent in both the groups (cement and screw retained).

CONCLUSIONS

High implant and prosthesis survival rates (above 98%) were achieved, yet substantial complication rates were encountered. The most frequent major biologic complication was peri-implantitis, with a 5-year implant-based rate of 8% (95% confidence interval [CI]: 5.8-11.1), whereas the most frequent major complication was fracture of porcelain with a 5-year dental unit-based rate of 4%. The estimated cumulative rates for "prosthesis free of biologic complications" were 50.4% (95% CI: 36.4% to 63.0%) at 5 years and 10.1% (95% CI: 3.5% to 20.8%) at 10 years, whereas for "prosthesis free of technical complications," they were 56.4% (95% CI: 41.7% to 68.8%) at 5 years and 9.8% (95% CI: 3.2% to 21.0%) at 10 years.

Long-term (10-year) dental implant survival: A systematic review and sensitivity meta-analysis

OBJECTIVES

To identify and appraise the most recent studies reporting dental implant survival in adults (≥18 years) using contemporary implant systems (solid screw, roughened surface) for a period of 10 years; and explore new predictors of implant survival.

SOURCE

MEDLINE, Scopus, and the Cochrane Central Register of Controlled trials were searched from 1997 to January 2018 to focus on contemporary implant systems.

STUDY SELECTION

Only prospective observational studies with at least 10 participants and 35 implants were included. The unit of study was the 'absolute survival' rate of dental implants after 10 years in the oral cavity. Study quality was assessed utilising a modified Hoy risk of bias tool for prevalence studies. A sensitivity meta-analysis was undertaken utilising a plausibly imputed model for missing data.

DATA

18 studies met the inclusion criteria. The summary estimate for 10-year survival at the implant level was 96.4% (95% CI 95.2%-97.5%) and the prediction interval was 91.5%-99.4%. The sensitivity meta-analysis summary estimate of survival was 93.2% (95% CI 90.1% to 95.8%)p = 0.041 with a prediction interval of 76.6%-100%. Older age (≥ 65 years) was a significant predictor at 91.5%, p = 0.038 in the sensitivity meta-analysis.

CONCLUSIONS

A traditional analysis produced similar 10-year survival estimates to previous systematic reviews. A more realistic sensitivity meta-analysis accounting for loss to follow-up data and the calculation of prediction intervals demonstrated a possible doubling of the risk of implant loss in the older age groups.

CLINICAL SIGNIFICANCE

Improved analysis provides the clinician with better estimation of the real-world risk of implant failures so helping the clinician communicate the potential risk to patients.

The influence of prosthetic material on implant and prosthetic survival of implant-supported fixed complete dentures: a systematic review and meta-analysis

PURPOSE

Evaluating the impact of the prosthetic material on implant- and prosthetic survival of implant-supported fixed complete dentures.

STUDY SELECTION

Electronic and hand searches were conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) to identify clinical studies including at least 10 patients restored with implant-supported dentures. The primary outcome was to evaluate the implant survival rate according to the applied restorative materials. The prosthetic survival rate was evaluated as secondary outcomes.

RESULTS

Forty-one of 2254 studies were finally selected. A statistically significant difference (p = 0.0337) was found between implant survival rates in the main restorative groups (metal-ceramic:97%(95%CI [0.96;0.98]), all-ceramic:99%(95%CI [0.98;1.00]), metal-resin:97%(95%CI [0.96;0.98])). Prosthetic survival rates were: (metal-ceramic:95%(95%CI [0.89;0.97]), all-ceramic:97%(95%CI [0.92;0.99]), metal-resin:97%(95%CI [0.95;0.98]), with no statistically significant difference (p = 0.3796) between the groups. Chipping incidence rates were as follows: metal-ceramic:8%(95%CI[0.03;0.20]), all-ceramic:15%(95%CI [0.06;0.32]), and metal-resin:22%(95%CI [0.13;0.33]). Five types of exact restorative materials were identified (porcelain-fused-to-non-precious alloy, porcelain-fused-to-zirconia, precious-metal-acrylic-resin, non-precious-metal-acrylic resin, and PMMA). Again, implant survival rates were statistically significantly influenced by the applied restorative materials (p = 0.0126), whereas, no significant differences were reported regarding prosthetic survival rate.

CONCLUSIONS

Prosthetic material selection seems to have no clinically relevant influence on implant- and prosthetic survival rate in implant-supported fixed complete dentures. Due to the high chipping rate, quantifying prosthetic survival alone does not seem to be a reliable tool for evaluating the outcome of the restorations and providing recommendations. These results, along with the obvious lack of evidence, suggest that clinicians must exercise caution whenever porcelain-fused-to-zirconia or metal-resin restorations are considered.

Implant supported cantilevered fixed dental rehabilitations in partially edentulous patients: Systematic review of the literature. Part I

OBJECTIVES

To investigate in which clinical situations a cantilever fixed implant supported restorations can be a treatment alternative and which complications are reported.

MATERIALS AND METHODS

Two operators screened the literature (MEDLINE, EMBASE) and performed a hand search on the main journals dealing with implantology and prosthetics until 31 December 2017. Only articles that considered cantilever implant fixed restorations with at least 10 patients and with a mean follow-up of at least 5 year were selected. The outcome variables were survival of implants and prosthesis, mechanical, technical and biological complications, marginal bone loss. The review was performed according to the PRISMA statements. Risk of bias assessment was evaluated. Failure and complication rates were analysed using random effect Poisson regression models to obtain summary estimate of 5- and 10-year survival and complication rates.

RESULTS

A total of nine papers were selected for partially edentulous patients and reported high survival rate of the prosthesis. The estimated survival rate for 5-10 years was calculated to be 98.4% for the implants and 99.2% for the rehabilitations. Mechanical, technical and biological complications were reported with a cumulative 5-10 years complication rate of 28.66% and 26.57% for the patients and for the prosthesis, respectively. Two papers for single implant supporting 2-unit cantilever were not sufficient to draw conclusions.

CONCLUSIONS

There is evidence that cantilever can be successful treatment in partially edentulous patients. In two adjacent edentulous sites, data are not yet sufficient.

Optimal number of implants for complete-arch implant-supported prostheses with a follow-up of at least 5 years: A systematic review and meta-analysis

STATEMENT OF PROBLEM

Consensus is lacking regarding the optimal number of implants for supporting complete-arch prostheses with good survival rates and lower prosthetic complications and marginal bone loss.

PURPOSE

The purpose of this systematic review was to evaluate the influence of the number of implants used for complete-arch prostheses with at least 5 years of follow-up.

MATERIAL AND METHODS

A search was performed in the PubMed/MEDLINE, Scopus, and Cochrane Library databases according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) criteria and was registered in The International Prospective Register of Systematic Reviews (CRD42016048468). The following was the population, intervention, comparison, outcome (PICO) question: Does the number of implants influence the longevity of complete-arch prostheses?

RESULTS

Nineteen studies including 1006 patients with a mean age of 61.44 years were selected for evaluation. The number of implants per jaw ranged between 2 and 9 in the maxilla, mandible, or both jaws. For implant survival rate in complete-arch prostheses with fewer than 5 implants per jaw, the pooled weighted event rate was 1.4% (I²=25.26%; P=.211) and 4.2% (I²=81.35%; P<.001) for complete arches with more than 4 implants per jaw. For the prosthesis survival rate, the pooled weighted event rate for a complete-arch with fewer than 5 implants per jaw was 1.5% (I²=0%; P=.677) and 9% (I²=17.33%; P=.304) for complete arches with more than 4 implants per jaw. For prosthesis complications for complete arches with fewer than 5 implants per jaw, the pooled weighted event rate was 19.9% (I²=93.5%; P<.001) and 24.5% (I²=88.89; P<.001) for complete arches with more than 4 implants per jaw. The mean marginal bone loss for complete arches with fewer than 5 implants per jaw was 1.22 ±0.49 mm (I²=99.46; P<.001) and 1.46 ±0.46 mm (I²=99.6; P <.001) for more than 4 implants per jaw.

CONCLUSIONS

The current systematic review indicated no relationship of the number of implants used to support a complete-arch prosthesis with implant survival rate, prosthesis survival rate, prosthesis complications, or marginal bone loss in studies with follow-up periods of between 5 and 15 years.

Scanning Electron Microscope (SEM) Evaluation of the Interface between a Nanostructured Calcium-Incorporated Dental Implant Surface and the Human Bone

Purpose. The aim of this scanning electron microscope (SEM) study was to investigate the interface between the bone and a novel nanostructured calcium-incorporated dental implant surface in humans. Methods. A dental implant (Anyridge^®, Megagen Implant Co., Gyeongbuk, South Korea) with a nanostructured calcium-incorporated surface (Xpeed^®, Megagen Implant Co., Gyeongbuk, South Korea), which had been placed a month earlier in a fully healed site of the posterior maxilla (#14) of a 48-year-old female patient, and which had been subjected to immediate functional loading, was removed after a traumatic injury. Despite the violent trauma that caused mobilization of the fixture, its surface appeared to be covered by a firmly attached, intact tissue; therefore, it was subjected to SEM examination. The implant surface of an unused nanostructured calcium-incorporated implant was also observed under SEM, as control. Results. The surface of the unused implant showed a highly-structured texture, carved by irregular, multi-scale hollows reminiscent of a fractal structure. It appeared perfectly clean and devoid of any contamination. The human specimen showed trabecular bone firmly anchored to the implant surface, bridging the screw threads and filling the spaces among them. Conclusions. Within the limits of this human histological report, the sample analyzed showed that the nanostructured calcium-incorporated surface was covered by new bone, one month after placement in the posterior maxilla, under an immediate functional loading protocol.

Marginal bone loss around non-submerged implants is associated with salivary microbiome during bone healing

Marginal bone loss during bone healing exists around non-submerged dental implants. The aim of this study was to identify the relationship between different degrees of marginal bone loss during bone healing and the salivary microbiome. One hundred patients were recruited, and marginal bone loss around their implants was measured using cone beam computed tomography during a 3-month healing period. The patients were divided into three groups according to the severity of marginal bone loss. Saliva samples were collected from all subjected and were analysed using 16S MiSeq sequencing. Although the overall structure of the microbial community was not dramatically altered, the relative abundance of several taxonomic groups noticeably changed. The abundance of species in the phyla Spirochaeta and Synergistetes increased significantly as the bone loss became more severe. Species within the genus Treponema also exhibited increased abundance, whereas Veillonella, Haemophilus and Leptotrichia exhibited reduced abundances, in groups with more bone loss. Porphyromonasgingivalis, Treponemadenticola and Streptococcus intermedius were significantly more abundant in the moderate group and/or severe group. The severity of marginal bone loss around the non-submerged implant was associated with dissimilar taxonomic compositions. An increased severity of marginal bone loss was related to increased proportions of periodontal pathogenic species. These data suggest a potential role of microbes in the progression of marginal bone loss during bone healing.