Effect of the buccal gap width following immediate implant placement on the buccal bone wall: A retrospective cone-beam computed tomography analysis

The Bio-Restorative Concept for Implant-Supported Restorations

OBJECTIVE

This study aims to present the bio-restorative approach in implant dentistry, which combines biological and restorative concepts through digital planning. This concept combines periodontal, surgical, and prosthetic variables, aiming to reduce patient morbidity while achieving satisfactory esthetic and functional outcomes in implant-supported restorations in the long term.

OVERVIEW

Implant dentistry evolved from a primarily surgical to a recent prosthetically driven approach. This evolution was partly due to advancements in bone reconstructive techniques and an increased demand for esthetic outcomes. Recently, digital planning has introduced a new paradigm that allows for the full integration of both approaches. The bio-restorative concept considers functional, esthetic, and biological variables in a virtual planning environment. This is achieved through the simultaneous digital assessment of (A) anatomical site characteristics and (B) implant restorative variables. These variables include digital tooth arrangement, soft-hard tissue conditions, implant variables, supra-platform components, and a surgical plan that respects or modifies peri-implant phenotype.

CONCLUSIONS

The bio-restorative concept is intended to improve contemporary implant dentistry by integrating updated biological and prosthetic notions through digital planning. Adopting this paradigm has the potential to redefine the standards in implant dentistry, fostering a holistic and patient-centered approach.

CLINICAL CONSIDERATIONS

It enhances patient and clinician satisfaction through more efficient and less invasive procedures. Significantly, it improves predictability, leading to successful implant-supported restorations in the long term.

Management of an extensive soft tissue deficiency prior to immediate implant in the aesthetic zone: a 4-year follow-up

Soft tissue deficiency in a tooth extraction site in the aesthetic area is a common and challenging clinical situation. This case report demonstrates the successful treatment of extensive gingival recession and buccal bone dehiscence associated with a hopeless tooth. Initially, a connective tissue graft was used to cover the root and thicken the soft tissue. After 2 months, the tooth was extracted, an implant was immediately placed, and a temporary restoration was installed. After 3 months, the soft tissue exhibited a natural and harmonious architecture. A custom zirconia abutment and crown were then fabricated and placed. At the 4-year follow-up, the peri-implant tissue displayed satisfactory aesthetics, with a well-structured buccal bone plate and healthy peri-implant indicators. This two-stage approach, addressing gingival recession first and proceeding with immediate implant placement after soft tissue healing, proved to be a safe and effective method with stable long-term results.

Flapless early implant placement into the uncalcified provisional matrix-Does it lead to osseointegration of the implant? A preclinical study

AIM

To test whether early implant placement into the extraction socket containing an uncalcified provisional matrix leads to successful osseointegration and stable marginal bone levels.

MATERIALS AND METHODS

In six mongrel dogs, the mandibular molars were extracted. Three weeks later, early implant placement was performed according to three experimental protocols: (i) flapless implant placement with preservation of the provisional matrix; (ii) flap elevation, socket debridement and implant placement; and (iii) flap elevation, socket debridement, implant placement and guided bone regeneration (GBR). One untreated extraction socket served as a control group. Data analyses were based on histologic slides 3 months after implant placement.

RESULTS

There were no differences in bone-to-implant contact between the three experimental groups (66.97%, 58.89% and 60.89%, respectively) (inter-group comparison p = .42). Marginal bone levels, first bone-to-implant contact as well as the thickness of the connective tissue did not reveal any significant differences between the groups (p = .85, .60 and .65, respectively).

CONCLUSIONS

Flapless early implant placement into posterior extraction sockets was as effective as an open flap approach in conjunction with GBR. Mineralization of the socket seems to occur irrespective of the presence of dental implants or biomaterials.

Evaluation of buccal bone resorption in immediate implant placement in thin versus thick buccal bone plates: An 18-month follow-up prospective cohort study

OBJECTIVES

The current guidelines recommend that immediate implants be placed in patients with thick (>1 mm) buccal bone due to the inevitable tissue remodeling that follows tooth extraction. The aim of the current study was to investigate the effect of buccal bone thickness on bone resorption in immediate implant placement and compare two measuring techniques of the aforementioned resorption.

MATERIALS

The present study was designed as a prospective nonrandomized, controlled clinical trial. A total of 30 implants were split between the two study arms, thin buccal bone and thick buccal bone. The primary outcome was to assess vertical bone changes radiographically by cone beam scans preoperatively, at 2 months and 18 months after implant placement in patients with thin and thick buccal plate. Secondary outcomes included the change in the thickness of the buccal bony plate, marginal bone loss, and pink esthetic score.

RESULTS

Only 26 implants were statistically analyzed as one early failure was observed in each group. Furthermore, 2 patients of the thick group withdrew from the study. Cone beam computed tomography measurements revealed that at 2 months the vertical bone loss was 1.09 for the thin group and 0.85 for the thick group. The buccal bone plate resorption of the thin group was 0.39 mm while it was 0.52 mm for the thick group. The buccal bone plate was 1.25 mm in the thin group and 1.88 mm in the thick group. The PES did not show any significant difference with very good esthetic results.

CONCLUSION

Within the limitations of the current study, the amount of buccal bone plate resorption and the subsequent thickness obtained after implantation in both groups suggest successful long-term results. The two measuring techniques have proven to be comparable and reliable in the measurement of buccal bony plate changes. https://classic.

CLINICALTRIALS

gov/ct2/results?cond=&term=NCT04731545&cntry=EG&state=&city=&dist=.

Jumping gap in immediate implant placement in the esthetic zone: A virtual implant planning using cone-beam computed tomography

PURPOSE

A jumping gap (JG) refers to the implant's future buccal wall; this study aims to estimate the jumping gap dimension in relation to virtual implant placement and subsequently link the implant diameter and implant position with the anatomical site.

METHODS

This observational study was conducted to analyze the maxillary teeth in the esthetic zone from cone-beam computed tomography (CBCT) scans using OnDemand software. The horizontal jumping gap dimension of each tooth was assessed by subtracting the calculated virtual implant diameter from the socket dimensions.

RESULTS

A total of 253 anterior and premolar maxillary teeth were analyzed from 52 CBCT scans. The estimated JG dimensions were 1.23 ± 0.59 mm, 1.80 ± 0.64 mm, 3.02 ± 0.69 mm, for central incisors, lateral incisors and canines respectively, 3.70 ± 0.68 mm for the first premolars showing the highest horizontal gap and 3.19 ± 0.88 mm for second premolars. The incisors showed the smallest horizontal gap compared to the canines and premolars.

CONCLUSIONS

In terms of JG, immediate implant placement is more favorable at the canine and premolar sites. By contrast, the incisors sites should be handled with extreme caution, where the use of narrower implants is advisable when necessary.

The facial-coronal ridge crest alterations after single immediate implant placement and provisionalization with thin buccal plate phenotype in anterior maxilla: A radiographic case-series study

AIM

To explore the features of and potential landmarks that predict crestal ridge remodeling after immediate implant placement and provisionalization (IIPP) with thin buccal plate phenotype in the anterior maxilla.

MATERIALS AND METHODS

Patients requiring IIPP of single maxillary incisor with thin buccal bone plate (<1 mm) were recruited. Cone-beam computed tomography (CBCT), performed before and 6 months after the intervention, were three-dimensionally superimposed. A virtual line connecting the bony emergence points of adjacent teeth was drawn as a reference. The facial-coronal alveolar crest of the extraction socket and healed ridge were located in mesial, middle and distal cross-sectional planes, and linear ridge reductions were measured. The correlation between ridge reduction and local factors was analyzed.

RESULTS

Fifty patients were included. From the extraction socket to healed ridge, the alveolar crest underwent linear bone reduction of 1.50 ± 0.50, 1.54 ± 0.66 and 1.65 ± 0.73 mm in the mesial, middle, and distal regions in an apical-palatal direction. The middle region had significantly higher horizontal (facial-palatal) but lower vertical (coronal-apical) bone reduction than the mesial and distal areas (P < 0.01). The facial-coronal ridge crest of the healed ridge located close to the reference line. Ridge reduction positively correlated with the distance between the initial facial-coronal crest of the extraction socket and the reference line (P < 0.01).

CONCLUSIONS

Alveolar crest of the socket lost its curvature and tended to attain a flat profile after IIPP due to inconsistent ridge reduction in middle, mesial and distal areas. The reference line may be a potential landmark for predicting the ridge crest after remodeling.

Case report and literature review: autonomous robotic system assisted palatal implantation at an anterior teeth site compromised by periapical cyst

Background

Immediate implant placement (IIP), which preserves gingival height and papilla shape while simultaneously accelerating the implant treatment period, has become a popular method due to its commendable clinical outcomes. Nonetheless, deploying immediate implants demands specific preconditions concerning the remaining alveolar bone. This poses a challenge to the accuracy of implant surgery.

Case presentation

In this report, we present the case of a 60-year-old woman with a left upper anterior tooth crown dislodged for over a month. Cone beam computed tomography (CBCT) revealed the absence of a labial bone wall on tooth 22, a remaining 1 mm bone wall on the labial side of the root apex, and a 17.2 mm*8.9 mm*4.7 mm shadow in the periapical region of the root apices of teeth 21 and 22, with the narrowest width on the sagittal plane being approximately 5 mm. After the surgeon removed the cyst, they completed the subsequent implantation surgery using an autonomous robot in a challenging aesthetic area. This method circumvented the potential exposure of the screw thread on the labial implant surface, assured initial implant stability.

Conclusion

Five months after the operation, the dental crown was restored. The implant remained stable, with yielding notable clinical results. To the best of our knowledge, this clinical case is the first to report the feasibility and precision of immediate implantation in anterior teeth site with periapical cyst removal, performed by an autonomous robotic surgical system. Autonomous robots exhibit exceptional accuracy by accurately controlling axial and angular errors. It can improve the accuracy of implant surgery, which may become a key technology for changing implant surgery. However, further clinical trials are still needed to provide a basis for the rapid development of robotic surgery field.

Marginal bone level change of immediately restored implants with simultaneous guided bone regeneration: A systematic review

AIM

To assess marginal bone level change (MBLc), clinical outcomes for soft tissue, and survival rates for immediately restored implants with simultaneous guided bone regeneration (GBR).

MATERIALS AND METHODS

Electronic and manual searches were conducted in PubMed/MEDLINE, EMBASE, and CENTRAL for studies that investigated immediately restored implants in simultaneously grafted sites with a mean follow-up of over 12 months. MBLc was the primary outcome. Soft tissue clinical parameters and implant survival rate (ISR) were the secondary outcomes.

RESULTS

Twenty-five studies (5 randomized controlled trials, 6 prospective studies, 2 retrospective studies, and 12 case series) were included, from which 692 immediately restored implants were analyzed. For studies that investigated bone grafts in the gap between the implant and the peripheral bone wall, the weighted mean MBLc was -0.73 ± 1.52 mm (range: -1.50 to 0.26 mm) for 475 implants. Pink esthetic score (PES) was improved in eight studies and the weighted cumulative ISR was 98.99% (Median: 100%) in 622 implants. Mean MBLc was -1.19 ± 0.26 mm for 30 implants in studies that reported gap with dehiscence and/or fenestration augmentation. Weighted cumulative ISR was 97.25% in 70 implants. A meta-analysis was not possible due to the lack of studies with an eligible control group. Therefore, the data should be interpreted with caution.

CONCLUSION

Less marginal bone loss and more predictable soft tissue parameters can be achieved for immediately restored implants with simultaneous peri-implant gap filling compared with gap with dehiscence/fenestration grafting. Increased ISR for implants with gap filling was observed. However, more evidence is needed to confirm whether immediate provisional prostheses should be utilized when bone defects are simultaneously augmented around the implants.

The natural CAD/CAM anterior implant single tooth restoration: A novel digital workflow

OBJECTIVE

To report a novel digital workflow to replace an anterior maxillary tooth lost due to trauma with an implant multilayer restoration by using the patient's extracted tooth as a final crown restoration using computer-aided design/computer-aided manufacturing (CAD/CAM) technology.

CLINICAL CONSIDERATIONS

Instead of using the patient's natural tooth as an immediate provisional restoration to achieve predictable results in terms of esthetics and soft tissue structure, a novel digital strategy was performed to obtain a natural final crown restoration by using the patient's tooth associated with a lithium disilicate customized implant abutment.

CONCLUSIONS

The perspective of using this strategic approach for implant restorative dental treatments in patients with traumatic root fractures in the anterior region has great potential as it helps to maintain the emergence profile of the natural dentition and esthetics.

CLINICAL SIGNIFICANCE

Optimal esthetic outcomes are challenging in implant dentistry regarding soft tissue structure and morphology factors. Using natural teeth from surgery to deliver the final restoration might be beneficial when an anterior tooth is lost due to trauma.

Critical review on bone grafting during immediate implant placement

In the last 20 years, immediate implant placement has been proposed as a predictable protocol to replace failing teeth. The research conducted in preclinical and clinical studies have focused on soft and hard tissue changes following tooth extraction and immediate implant placement. Different approaches for hard and soft tissue grafting together with provisional restorations have been proposed to compensate tissue alterations. This review analyzed some relevant clinical and preclinical literature focusing on the impact of bone grafting procedures on immediate implant placement in terms of hard and soft tissue changes, aesthetic results, and patient-related outcomes.

Selection criteria for immediate implant placement and immediate loading for single tooth replacement in the maxillary esthetic zone: A systematic review and meta-analysis

OBJECTIVES

The aim of this study was to review available evidence for Type 1A (immediate implant placement and immediate loading) of single tooth replacement in the maxillary esthetic zone.

MATERIALS AND METHODS

An electronic search was conducted utilizing the databases of MEDLINE, Embase, and Cochrane to identify publications reporting on the outcomes of Type 1A for single tooth replacement in the maxillary esthetic zone. The success and survival rates of the included articles were reported, which were further categorized according to the clinical criteria reported in Type 1A. Mean survival rates were univariately compared between risk groups and additionally between studies published before and since 2012 using bias-corrected and study size-weighed bootstrap tests. A study time-correcting meta-analysis was then performed to obtain an overall effect for the study pool.

RESULTS

A total of 3118 publications were identified in the search, with a total of 68 articles included. A mean number of implants per study were 37.2 and mean follow-up was 2.8 years. All the included studies utilizing Type 1A report highly selective inclusion and exclusion criteria. Univariate risk group comparison determined that studies before 2012 report a significantly lower mean survival rate (difference of -1.9 percentage points [PP], 95% CI: [-0.3, -4.0], p = .02), facial gap dimension had an impact on survival rates (+3.1 PP [0.2, 5.3] for width >2 mm, p = .04), as well as presence of endodontic infection (+2.6 PP [0.9, 5.1], p = .004).

CONCLUSIONS

Type 1A has a high survival rate in studies reporting strict patient and site selection criteria. Further research is required to assess esthetic and functional success with Type 1A treatments.

Influence of using collagen on the soft and hard tissue outcomes of immediate dental implant placement: A systematic review and meta-analysis

OBJECTIVE

To compare the effects of bone grafting materials, collagen-infused grafting materials, and no grafting materials on the soft and hard tissue outcomes when an immediate implant is placed.

MATERIALS AND METHODS

In addition to hand searching, electronic searches were performed in Pubmed, Embase, and the Cochrane Central Register of Controlled Trials (CENTRAL). Only RCTs were included in our review. The Cochrane ROB 2.0 tool was used to assess the risk of bias (ROB). Two subgroups were used to evaluate implant failure rate, buccal bone resorption, soft tissue thickness, and esthetic scores. In the meta-analysis, both the fixed-effects model and the random-effects model were employed.

RESULT

7 RCTs were selected after screening 580 studies, and 205 patients were included in the review, with 279 implants. Two RCTs were at low bias of risk, three were at moderate bias, and two were deemed at high risk of bias. The failure rate (95% CI: 0.17 to 11.84) and soft tissue thickness were not significantly different between collagen with bone grafting materials and without bone grafting materials. On the basis of the failure rate and buccal bone thickness, there was no significant difference between collagen with bone grafting materials and bone grafting materials. While we found collagen with bone grafting materials could have a significant advantage on the buccal bone thickness (MD: -0.43,95% CI -0.72 to -0.41) and esthetic outcome (MD: -1.23,95% CI -1.90 to -0.55).

CONCLUSION

In the statement of immediate implant implantation, the thickness of the buccal bone and esthetic outcomes did significantly benefit from bone grafting materials with collagen inserted in the "jumping gap".

Bone dimensional changes after flapless immediate implant placement with and without bone grafting: Randomized clinical trial

INTRODUCTION

Immediate implant in postextraction sockets requires managing the postextraction alveolar resorption. This randomized clinical trial examined vertical and horizontal changes 1-year following flapless immediate implant with and without xenograft at sites with thin labial plate.

METHODS

Forty patients with hopeless teeth in maxillary esthetic zone were randomly assigned to receiving either one immediate implant without bone graft (control) or with bone graft (intervention). Cone beam computed tomography (CBCT) scans were obtained pre-extraction and 1-year postoperatively to measure thickness and dimensional changes of the labial bone.

RESULTS

Cone beam computed tomography measurements revealed that a xenograft, when compared to no xenograft, led to 0.2 mm increased fill of the horizontal gap (95% confidence interval (CI): -1.1, 0.7). In both groups, there was a significant reduction in the labio-palatal bone width after 1 year compared to baseline (P ≤ 0.05). There was no significant difference (P > 0.05) between the xenograft when compared to no xenograft regarding the labio-palatal bone collapse % at 0 mm (-0.2, 95% CI: -4.8, 4.5) and 2 mm apical to the labial crest (1.9, 95% CI: -1.8, 5.6). While at 5 mm the ridge was significantly reduced (P ≤ 0.05) in the no xenograft when compared to xenograft (4.5, 95% CI: 0.7, 8.2). The xenograft when compared to no xenograft, led to 1.1 mm less vertical bone changes (95% CI: 0.4, 1.9). Both groups revealed significant positive correlation between labio-palatal socket dimension and bone formed labial to the implant (P ≤ 0.05). [Correction added on 7 February 2023, after first online publication: In the 8th line of this section, the word "collapse" was changed to "ridge" in this version.] CONCLUSION: This investigation suggested that immediate implants with or without grafting the labial gap preserved alveolar bone dimension and that bone formation labial to the implant was related to initial labio-palatal socket dimension.