Prospective Clinical Study with New Materials for Tissue Regeneration: A Study in Humans

OBJECTIVE

 This study was performed to evaluate the clinical, radiographic, and histomorphometric outcomes of novel bone grafting materials and dental membranes and to compare the results with current data from the literature.

MATERIALS AND METHODS

 New synthetic bone substitutes, consisting of biphasic calcium phosphate in the ratio of 60% hydroxyapatite and 40% β-tricalcium phosphate, were applied in bony defects and covered by either a novel synthetic poly(lactic-co-glycolic) acid (PLGA) or porcine collagen membrane. A sample of 51 biomaterials was placed in a total of 20 patients during different surgical protocols. Implants were simultaneously inserted, and in the case of sinus floor elevations 6 months later. Pre- and postoperative cone-beam computed tomographies were taken. Bone biopsies were harvested from augmented sides and processed for histomorphometric evaluation.

STATISTICAL ANALYSIS

 Averages and ranges were calculated for the percentage of newly formed bone, residual biomaterial, and connective tissue. Data were submitted to analyze the radiological mean differences in length, width, and density. Paired t-tests were deployed for the analysis of differences within each group between the baseline (preoperative) and the final (postoperative) measurements.

RESULTS

 The mean bone gain in length and width were 0.96 ± 3.33 mm (+27.59%) and 1.22 ± 1.87 mm (+30.48%), respectively. The bone density was increased by a factor of 4, reaching an average of 387.47 ± 328.86 HU. Histomorphometric evaluations revealed new bone formation of 41.44 ± 5.37%, residual biomaterial of 24.91 ± 7.31%, and connective tissue of 33.64 ± 4.81%. The mean healing period was 8.32 ± 3.00 months.

CONCLUSIONS

 Data from this study confirmed the suitability of the tested materials in dental surgery. The biomaterials may be recommended for various clinical procedures. A satisfactory level of increase of new bone was reported in augmented sides. No significant differences were observed between the tested membranes. PLGA membranes might be superior to collagen membranes for their easier handling.

Biocompatibility and osteointegration capability of β-TCP manufactured by stereolithography 3D printing: In vitro study

Beta-tricalcium phosphate (β-TCP) bioceramics have an inorganic composition similar to the human bone. While conventional methods can only produce ceramic scaffolds with poor controllability, the advancement of 3D-printing, especially stereolithography, made it possible to manufacture controllable, highly precise, micropore ceramic scaffolds. In this study, the stereolithography was applied to produce β-TCP bioceramics, while ZrO₂, Al₂O₃, Ti6Al4V, and polyetheretherketone (PEEK) were used as controls. Phase analysis, water contact angle tests, and Micro-CT were applied to evaluate the surface properties and scaffold. Hemolytic toxicity, cell proliferation, and morphological assessment were performed to evaluate the biocompatibility. Alkaline phosphatase (ALP) level, mineralization, and qRT-PCR were measured to evaluate the osteointegration. During the manufacturing of β-TCP, no evident impurity substance and hemolytic toxicity was found. Cells on β-TCP had good morphologies, and their proliferation capability was similar to Ti6Al4V, which was higher than the other materials. Cells on β-TCP had higher ALP levels than PEEK. The degree of mineralization was significantly higher on β-TCP. The expression of osteogenesis-related genes on β-TCP was similar to Ti6Al4V and higher than the other materials. In this study, the β-TCP produced by stereolithography had no toxicity, high accuracy, and excellent osteointegration capability, thus resulting as a good choice for bone implants.

Pre-Clinical Models in Implant Dentistry: Past, Present, Future

Biomedical research seeks to generate experimental results for translation to clinical settings. In order to improve the transition from bench to bedside, researchers must draw justifiable conclusions based on data from an appropriate model. Animal testing, as a prerequisite to human clinical exposure, is performed in a range of species, from laboratory mice to larger animals (such as dogs or non-human primates). Minipigs appear to be the animal of choice for studying bone surgery around intraoral dental implants. Dog models, well-known in the field of dental implant research, tend now to be used for studies conducted under compromised oral conditions (biofilm). Regarding small animal models, research studies mostly use rodents, with interest in rabbit models declining. Mouse models remain a reference for genetic studies. On the other hand, over the last decade, scientific advances and government guidelines have led to the replacement, reduction, and refinement of the use of all animal models in dental implant research. In new development strategies, some in vivo experiments are being progressively replaced by in vitro or biomaterial approaches. In this review, we summarize the key information on the animal models currently available for dental implant research and highlight (i) the pros and cons of each type, (ii) new levels of decisional procedures regarding study objectives, and (iii) the outlook for animal research, discussing possible non-animal options.

Will stem cells from fat and growth factors from blood bring new hope to female patients with reproductive disorders?

Female reproductive system disorders (FRSD) with or without infertility are prevalent women's health problems with a variety of treatment approaches including surgery and hormone therapy. It currently considering to sub-branch of regenerative medicine including stem cells or growth factors injection-based delivery treatment might be improved female reproductive health life. The most common products used for these patients treatment are autologous cell or platelet-based products from patients, including platelet-rich plasma, plasma rich in growth factor, platelet-rich fibrin, and stromal vascular fraction. In this review, we discuss each of the above products used in treatment of FRSD and critically evaluate the clinical outcome.

A multifunctional electrowritten bi-layered scaffold for guided bone regeneration

The guided bone regeneration (GBR) concept has been extensively utilized to treat maxillofacial bone defects in clinical practice. However, the repair efficacy of currently available GBR membranes is often compromised by their limited bone regeneration potential and deficient antibacterial activity. In this study, inspired by the bi-layered structure design of the commonly used Bio-Gide^Ⓡmembrane, we designed and fabricated a new kind of multifunctional bi-layered "GBR scaffold" combining solution electrospinning writing (SEW) and solution electrospinning (SES) techniques using a single SEW printer. Copper-loaded mesoporous silica nanoparticles (Cu@MSNs) were incorporated into the poly(lactic-co-glycolic acid)/gelatin (PLGA/Gel, denoted as PG) fiber matrix to construct a composite PG-Cu@MSNs fibrous scaffold. The obtained GBR scaffold consisted of a loose and porous SEW layer to support and facilitate bone ingrowth, and a dense and compact SES layer to resist non-osteoblast interference. The resulting enhanced mechanical properties, coordinated degradation profile, and facile preparation procedure imparted the composite scaffold with good clinical feasibility. In vitro biological experiments indicate that the PG-Cu@MSNs composite scaffold exhibited favorable osteogenic and antibacterial properties. Furthermore, an in vivo rat periodontal defect model further confirmed the promising bone regeneration efficacy of the PG-Cu@MSNs scaffold. In conclusion, the developed electrowritten Cu@MSNs-incorporated bi-layered scaffold with hierarchical architecture and concurrent osteogenic and antibacterial functions may hold great potential for application in GBR.

Membranes for Guided Bone Regeneration: A Road from Bench to Bedside

Bone resorption can negatively influence the osseointegration of dental implants. Barrier membranes for guided bone regeneration (GBR) are used to exclude nonosteogenic tissues from influencing the bone healing process. In addition to the existing barrier membranes available on the market, a growing variety of membranes for GBR with tailorable physicochemical properties are under preclinical evaluation. Hence, the aim of this review is to provide a comprehensive description of materials used for GBR and to report the main industrial and regulatory aspects allowing the commercialization of these medical devices (MDs). In particular, a summary of the main attributes defining a GBR membrane is reported along with a description of commercially available and under development membranes. Finally, strategies for the scaling-up of the manufacturing process and the regulatory framework of the main MD producers (USA, EU, Japan, China, and India) are presented. The description of the regulatory approval process of GBR membranes is representative of the typical path that medium- to high-risk MDs have to follow for an effective medical translation, which is of fundamental importance to increase the impact of biomedical research on public health.

PRGF as adjunct to DBB in maxillary sinus floor augmentation: histological results of a pilot split-mouth study

Background

Various technologies of autologous blood concentrates are currently evaluated for their potential to enhance bone formation.

Aim

To report on the histological outcome of maxillary sinus floor augmentation (MSFA) with deproteinized bovine bone (DBB) in combination with chair-side prepared autologous platelet-rich growth factor (PRGF), in comparison to that with DBB alone.

Materials and methods

Six partially edentulous patients with ≤ 3-mm residual bone height bilaterally in the posterior maxilla were subjected to MSFA with the lateral window technique, using DBB in combination with PRGF (PRGF System1 Vitoria, Spain) on one side or DBB alone on the contralateral side. Cylindrical biopsies from the augmented sinuses were collected during implant installation, ca. 6 months post-MSFA, and subjected to non-decalcified histological and histomorphometric evaluation.

Results

The collected biopsies varied in length (range 3.5–9.9 mm); consequently, the portion of the biopsy representing augmented tissues also varied (range 2.3–14.6 mm²). New bone formation with a trabecular appearance and numerous DBB particles in contact with the new bone or with loose connective tissue were observed. No differences in the relative volumes of bone formation were found in sinuses augmented with DBB + PRGF or DBB alone 6 months after MSFA (35.6 ± 8.26 mm and 37.8 ± 3.15 mm, respectively).

Conclusion and clinical implications

In conclusion, based on these preliminary results, PRGF as adjunct to DBB for MSFA, except from improved handling during the operation, does not appear to enhance nor interfere with bone formation inside the human sinus 6 months after MSFA, compared with the use of DBB alone.

Plasma rich in growth factors (PRGF) in intraoral bone grafting procedures: A systematic review

PURPOSE

This systematic review aimed at assessing the effects of PRGF in new bone formation, soft tissue healing and post-operative pain and swelling in sites that underwent ridge preservation, ridge augmentation and maxillary sinus augmentation procedures.

MATERIALS AND METHODS

A comprehensive literature search employing seven databases was conducted by two independent reviewers. Only randomized and non-randomized controlled clinical trials using PRGF alone or in combination with bone grafting materials were selected.

RESULTS

Overall, 919 studies were identified, of which a total of 8 articles were included in the qualitative analysis. Two of the selected studies reported on ridge preservation, one on ridge augmentation and five on maxillary sinus augmentation. Positive results were recorded for soft tissue healing and post-operative pain and swelling following these procedures. However, outcomes of PRGF on new bone formation post extraction and on maxillary sinus augmentation when combined with other biomaterials were conflicting. Meta-analysis could not be conducted for any variables due to the heterogeneity of selected studies.

CONCLUSION

Limited evidence exists on the effects of PRGF in different intraoral bone grafting procedures, with some benefit reported on soft tissue healing and post-operative symptomatology. As this platelet concentrate is commonly used in clinical practice, further research is needed to fully assess its clinical indications and effectiveness.

Guided Bone Regeneration Using Collagen Scaffolds, Growth Factors, and Periodontal Ligament Stem Cells for Treatment of Peri-Implant Bone Defects In Vivo

Introduction

The aim of the study was an evaluation of different approaches for guided bone regeneration (GBR) of peri-implant defects in an in vivo animal model.

Materials and Methods

In minipigs (n = 15), peri-implant defects around calcium phosphate- (CaP-; n = 46) coated implants were created and randomly filled with (1) blank, (2) collagen/hydroxylapatite/β-tricalcium phosphate scaffold (CHT), (3) CHT + growth factor cocktail (GFC), (4) jellyfish collagen matrix, (5) jellyfish collagen matrix + GFC, (6) collagen powder, and (7) collagen powder + periodontal ligament stem cells (PDLSC). Additional collagen membranes were used for coverage of the defects. After 120 days of healing, bone growth was evaluated histologically (bone to implant contact (BIC;%)), vertical bone apposition (VBA; mm), and new bone height (NBH; %).

Results

In all groups, new bone formation was seen. Though, when compared to the blank group, no significant differences were detected for all parameters. BIC and NBH in the group with collagen matrix as well as the group with the collagen matrix + GFC were significantly less when compared to the collagen powder group (all: p < 0.003).

Conclusion

GBR procedures, in combination with CaP-coated implants, will lead to an enhancement of peri-implant bone growth. There was no additional significant enhancement of osseous regeneration when using GFC or PDLSC.