Performance of a new implant system and drilling protocol-A minipig intraoral dental implant model study

AIM

A new implant system encompassing implants with a tri-oval cross-sectional design and a simplified site preparation protocol at low speed and no irrigation has been developed. The objective of this study was to assess the safety and efficacy of the new implant system using the minipig intraoral dental implant model.

METHODS

Eight Yucatan minipigs were included. Twelve weeks after extractions, four implants per animal were randomly placed and allowed to heal transmucosal for 13 weeks: two Ø3.5 × 10 mm implants with a back-tapered collar and circular cross-section (control) and two Ø3.5 × 11 mm implants with tri-oval collar and cross-section (test). MicroCT and histological analysis was performed.

RESULTS

Thirty-two implants were placed; one implant for the control group was lost. Histologically, BIC was higher in the test compared with the control group (74.1% vs. 60.9%, p < .001). At the platform level, inflammation was statistically significantly higher albeit mild in the test compared with the control group. No other significant differences were observed between groups. MicroCT analysis showed that bone-to-implant-contact (BIC) and trabecular thickness were statistically significantly higher for the test than the control group. Test group had significantly higher first BIC distance than controls on lingual sites.

CONCLUSIONS

The present study results support the safety and efficacy of the new dental implant system and simplified site preparation protocol; human studies should be carried out to confirm these findings.

The effect of triangular cross-section neck design on crestal bone stability in the anterior mandible: A retrospective study with a 5-year follow-up

OBJECTIVES

The objective of this study, which included a 5-year follow-up, was to compare peri-implant soft tissue health, crestal bone loss (CBL), and buccal bone thickness (BBT) around triangular cross-section neck (TN) or round neck (RN) implants, using cone-beam computed tomography.

MATERIALS AND METHODS

This study was initially designed as a prospective 1-year randomized controlled study and then extended with a 5-year retrospective evaluation of clinical and radiographic records. In the initial 1-year study, a total of 20edentulous patients receiving 40 implants with similar diameters were randomly assigned to the RN or TN groups using a split-mouth design. Pocket probing depths (PPD), plaque index (PI), and gingival index (GI) were recorded at postoperative month 12. CBL and BBT at three levels (0, -2, and -4 mm) were evaluated 1 year after insertion. Five years after insertion, PPD, PI, GI, CBL, and BBT were recorded as patients were recalled for clinical and radiographic monitoring.

RESULTS

Nineteen patients completed the study. After 5 years, no significant differences in PPD, PI, and GI scores and BBT values between the two groups (p > .05). The mean ± SD CBL values at the final follow-up visit were -0.71 ± 0.69 mm for TN and -1.03 ± 0.86 mm for RN (p < .01).

CONCLUSIONS

These results suggest better crestal bone preservation using implants with TN when compared to RN after a 5-year follow-up. However, TN showed similar results to RN regarding peri-implant soft tissue health and BBT.

Influence of buccal bone wall thickness on the peri-implant hard and soft tissue dimensional changes: A systematic review

BACKGROUND

The significance on the association between the peri-implant bucco-lingual dimension (BLD) at the stage of implant placement and the occurrence of biological and esthetic complications is yet unknown.

MATERIAL AND METHODS

Systematic screening of electronic sources was carried out to identify clinical and preclinical studies reporting on the baseline BLD and/or buccal bone thickness (BBT) values. A secondary objective was to assess the effect of simultaneous grafting at sites with deficient or no buccal bone wall (BBW) at baseline. The primary outcome variables were BBT, BLD, and buccal vertical bone loss (VBL) at re-evaluation. Moreover, radiographic, clinical, and patient-reported outcome measures (PROMs) were evaluated.

RESULTS

Overall, 12 clinical and four preclinical studies met the inclusion criteria. Inconsistencies were found in defining the critical BBT across the clinical and preclinical data evaluated. The clinical evidence demonstrated that during healing, dimensional changes occur in the alveolar bone and in the BBW that may compromise the integrity of the peri-implant bone, leading to VBL and mucosal recession (MR), particularly in scenarios exhibiting a thin BBW. The preclinical evidence validated the fact that implants placed in the presence of a thin BBW, are more prone to exhibit major dimensional changes and VBL. Moreover, the clinical data supported that, in scenarios where dehiscence-type defects occur and are left for spontaneous healing, greater VBL and MR together with the occurrence of biologic complications are expected. Furthermore, the augmentation of dehiscence-type defects is associated with hard and soft tissue stability. PROMs were not reported.

CONCLUSIONS

Dimensional changes occur as result of implant placement in healed ridges that may lead to instability of the peri-implant hard and soft tissues. Sites presenting a thin BBW are more prone to exhibit major changes that may compromise the integrity of the buccal bone and may lead to biologic and esthetic complications.

Clinical and radiographic assessment of circular versus triangular cross-section neck implants in the posterior maxilla: Five-year follow-up of a randomized controlled trial

OBJECTIVES

Dental implants with a triangular neck design have been developed in order to maintain peri-implant bone. The primary aim of this randomized controlled trial (RCT) was to assess after 5 years the peri-implant bone stability and the peri-implant soft tissue conditions with this new triangular implant neck design compared to a conventional round neck implant design.

MATERIAL AND METHODS

This is a secondary evaluation of a RCT including 34 patients. Patients were recalled after 1, 3, and finally 5 years to assess implant survival and peri-implant bone levels using standardized radiographs. Peri-implant soft tissue health was also evaluated by recording probing depth, plaque index and Bleeding on Probing. Patient Reported Outcome Measures (PROMs) and the Pink Esthetic Score were also assessed.

RESULTS

No implant loss occurred during the 5-year follow up period. The mean ± SD proximal bone remodeling after 5 years reached 0.38 ± 0.39 mm for the circular design and 0.29 ± 0.58 mm for the triangular design (p = .49). Peri-implant soft tissue health parameters and PROMs were found to be comparable. Altogether, 80% of implants presented peri-implant mucositis whereas one implant (4%) displayed sings of peri-implantitis.

CONCLUSION

The 5-year evaluation of the triangular neck implants showed similar results to the circular neck implants.

Significance of buccal bone wall thickness on the fate of peri-implant hard and soft tissues: A systematic review

BACKGROUND

The significance of the association between the peri-implant buccolingual dimension (BLD) at the stage of implant placement and the occurrence of biological and esthetic complications is yet unknown.

MATERIAL AND METHODS

Systematic screening of electronic sources was carried out to identify clinical and preclinical studies reporting on the baseline BLD and/or buccal bone thickness (BBT) values. A secondary objective was to assess the effect of simultaneous grafting at sites with deficient or no buccal bone wall (BBW) at baseline. The primary outcome variables were BBT, BLD, and vertical bone loss (VBL) at re-evaluation. Moreover, radiographic, clinical- and patient-reported outcome measures (PROMs) were evaluated.

RESULTS

Overall, 12 clinical and four preclinical studies met the inclusion criteria. The clinical evidence demonstrated that during healing, dimensional changes occur in the alveolar bone and in the BBW that may compromise the integrity of bone around a dental implant. The preclinical evidence validated the fact that implants placed in the presence of thin BBW are more prone to exhibit major dimensional changes. Moreover, the clinical and preclinical data supported that in scenarios where dehiscence-type defects are left for spontaneous healing, greater VBL and mucosal recession (MR) together with the occurrence of biologic complications are expected. Furthermore, the augmentation of dehiscence-type defects is associated with hard and soft tissue stability.

CONCLUSIONS

Dimensional changes occur as a result of implant placement in healed ridges that may lead to VBL and MR. Thin BBW (≲2 mm) are prone to exhibit major postchanges that may compromise the integrity of the buccal bone, biologic and esthetic complications.

Clinical and Radiographic Evaluation of a Novel Triangular Implant Neck Design: A Case Series

The objective of this study was to evaluate the clinical and radiographic behavior of a novel triangular neck implant configuration in partially edentulous patients. Sixteen patients with a mean age of 58.3 years, were rehabilitated with 25 implants inserted in the healed sites of the maxilla and mandible; implant diameter was Ø3.3 and 3.9 mm. Clinical and radiographic measurements were first performed at prosthesis delivery that served as baseline; they were further evaluated after a mean period of 15.6 months. The interproximal peri-implant bone levels were the primary outcome; the mesial and distal data were recorded and a mean value was calculated. Secondary outcomes included peri-implant probing depth (PPD) and bleeding on probing (BoP). The paired t-test was used to compare the radiographic and clinical outcomes between baseline and follow-up. The mean bone levels at the mesial and distal aspects at baseline were 0.45 (0.47) and 0.57 (0.69), respectively; at follow-up they were 0.59 (0.42) and 0.78 (0.59), respectively. The differences were not statistically significant. Similarly, no significant differences were found for the clinical parameters. Within the limitations of the present study, it could be concluded that this new triangular neck bone level implant macro-design was used successfully to treat partially edentulous patients. Larger controlled clinical studies are warranted to confirm the present radiographic and clinical findings.

Covariates Relating to Implant Failure and Marginal Bone Loss of a Novel Triangular Neck-Implant Placed by Post-Graduate Students: A 1-Year Prospective Cohort Study

(1) Background: Most of the clinical literature dealing with dental implants has been issued by experienced teams working either in university settings or in private practice. The purpose of this study was to identify contributing covariates to implant failure and marginal bone loss (MBL) at the 1-year follow-up of a novel triangular-neck implant design when placed by inexperienced post-graduate students. (2) Methods: A prospective cohort study was conducted on study participants eligible for implant placement at the UIC (International University of Catalonia), Barcelona, Spain. Implant failure rate and contributors to implant failure and MBL were investigated among 24 implant and patient variables. (3) Results: One hundred and twenty implants (V3, MIS) were placed and rehabilitated by the students. The mean insertion torque was 37.1 Ncm. Survival and success rates were 97.5% and 96.7%, respectively. Implants placed in patients with smoking habits displayed a tendency of higher failure risk (OR = 5.31, p = 0.17) when compared to non-smokers. The mean (SD) MBL was 0.51 (0.44) mm. Gender significantly affected the MBL (p = 0.020). Bleeding on probing (BoP) on the buccal sites proved to be a good predictor of proximal MBL (p = 0.030). (4) Conclusions: The survival and success rates of the V3 triangular-neck implant placed by inexperienced post-graduate students at the 1-year follow-up were high and similar to the ones published in the literature by experienced teams on other implants.

The effect of triangular cross-section neck design on crestal bone stability in the anterior mandible: A randomized, controlled, split-mouth clinical trial

OBJECTIVES

This randomized controlled trial aimed to compare crestal bone loss (CBL) and buccal bone thickness (BBT) around triangular cross-section neck (TN) to round neck (RN) implants retaining mandibular overdentures one year after loading, using cone beam computed tomography (CBCT).

MATERIAL AND METHODS

Twenty edentulous patients receiving 40 implants with similar diameters were randomly assigned to the RN and TN groups. Clinical buccal bone thickness (CBBT) around the implants was measured with a caliper at baseline. A resonance frequency analyzer was used to measure the implant stability quotient (ISQ) at the baseline and two months after insertion. Pocket probing depths (PPD), plaque index (PI), and gingival index (GI) were also recorded at postoperative months 2, 6, and 12. CBCT was used to evaluate proximal CBL and BBT at three levels (0, -2, and -4 mm) one year after loading.

RESULTS

No implant loss was observed during the follow-up period. No significant differences in CBBT, ISQ values, and scores for PPD, PI, and GI between the two groups were observed at any time (p > .05). BBT was also comparable one year after loading (p > .05). The mean ± SD proximal CBL one year after loading was 0.58 ± 0.36 mm for TN and 0.91 ± 0.59 mm for RN (p < .01).

CONCLUSIONS

This study found better crestal bone preservation in the implants with the novel neck design than conventional neck design in the anterior mandible after a follow-up of one year. However, it may not be clinically noticeable.

Endodontic treatment of various palatal root in maxillary molars: Case series and clinical experience

BACKGROUND AND OVERVIEW

The purpose of this article is to present the variations in maxillary molar palatal root canals and provide a reference for the possible variations in root canal treatment.

CASE DESCRIPTION

Five rare cases with palatal canal variation presented in this case series received nonsurgical endodontic treatment successfully. These case reports highlight that understanding and managing the different types of canal configurations in palatal roots of maxillary molars is essential to successful root canal treatment. We tried 2 methods of examining the palatal canal variation to provide examples for clinicians in diagnosing and treating similar cases.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

The outline form of the access cavity and the shape of the pulp chamber floor are important factors for identifying variations in root canal number. Moreover, cone-beam computed tomography can help in detecting variations in root canals.