Decellularized human amniotic membrane: how viable is it as a delivery system for human adipose tissue-derived stromal cells?

Inhibition of the AP-1/TFPI2 axis contributes to alleviating cerebral ischemia/reperfusion injury by improving blood-brain barrier integrity

Reperfusion after cerebral ischemia leads to secondary damage to the nervous system, called cerebral ischemia/reperfusion injury (CIRI). The blood-brain barrier (BBB) consists of endothelial cells and tight junction (TJ) proteins, and its disruption aggravates CIRI. Two GSE datasets identified Tissue Factor Pathway Inhibitor 2 (TFPI2) as a differentially upregulated gene (Log2FC > 1, p < 0.01) in the cerebral cortex of ischemic rats, and TFPI2 affects angiogenesis of endothelial cells. Moreover, genes (c-Jun, c-Fos, FosL1) encoding subunits of Activator Protein-1 (AP-1), a transcription factor involved in IRI, were highly expressed in ischemic samples. Thus, the effects of the AP-1/TFPI2 axis on CIRI were explored. We determined increased TFPI2 expression in the cerebral cortex of rats receiving middle cerebral artery occlusion (MCAO) for 90 min and reperfusion (R) for 48 h. Then AAV2-shTFPI2 particles (5 × 1010 vg) were injected into the right lateral ventricle of rats 3 weeks before MCAO/R. TFPI2 knockdown decreased infarct size and neuronal injury in ischemic rats. It improved BBB integrity, demonstrated by reduced FITC-dextran leakage in brain tissues of MCAO/R-operated rats. Furthermore, it increased the expression of TJ proteins (Occludin, Claudin-5, TJP-1) in the cerebral cortex of rats with CIRI. Consistently, we found that TFPI2 knockdown mitigated cell damage in mouse endothelial bEND.3 cells with oxygen and glucose deprivation (ODG) for 6 h and reoxygenation (R) for 18 h (OGD/R) treatment. High co-expression of c-Jun and c-Fos significantly elevated TFPI2 promoter activity. c-Jun knockdown inhibited TFPI2 expression in OGD/R-treated bEND.3 cell. Collectively, our findings demonstrate that inhibition of the AP-1/TFPI2 axis alleviates CIRI.

Transplantation of acellular amniotic membrane seeded with adipose-derived mesenchymal stem cells in a rat model of intrauterine adhesion

Objective

This study aimed to investigate the role of acellular amniotic membrane (AAM) loaded with adipose-derived mesenchymal stem cells (ADSCs) for the treatment of intrauterine adhesion.

Methods

One hundred twenty female Spargue-Dawley rats were randomly divided into four groups: sham operation group (the uterus was picked out and incised without treatment), intrauterine adhesion group, the experimental group treated with AAM, and experimental group treated with AAM loaded with ADSCs. Histological and immunohistochemical analysis were performed on 3, 7, and 14 days after surgery to evaluate the degree of uterine fibrosis and regeneration of injured endometrium. RNA sequencing and real-time PCR were used to explore the potential mechanism by which ADSCs modulated immune response and promoted endometrial regeneration.

Results

On 14 days after surgery, the endometrial thickness, number of glands, and degree of fibrosis reduction in the ADSCs/AAM group was higher than those in the AAM group, and similar to the sham operation group. RNA sequencing analysis showed that ADSCs can modulate local immune responses and promote the formation of functional endometrium. Meanwhile, we found that ADSCs significantly decreased the levels of pro-inflammatory cytokines (TNF-α and IL-1β) and increased the levels of anti-inflammatory cytokines (bFGF and IL-6).

Conclusion

Our results demonstrated that AAM loaded with ADSCs can result in the regeneration of injured endometrium and fibrosis reduction. Meanwhile, ADSCs also regulated the immune microenvironment, which was beneficial to functional endometrial recovery.

Assessment of the proteome profile of decellularized human amniotic membrane and its biocompatibility with umbilical cord-derived mesenchymal stem cells

Extracellular matrix-based bio-scaffolds are useful for tissue engineering as they retain the unique structural, mechanical, and physiological microenvironment of the tissue thus facilitating cellular attachment and matrix activities. However, considering its potential, a comprehensive understanding of the protein profile remains elusive. Herein, we evaluate the impact of decellularization on the human amniotic membrane (hAM) based on its proteome profile, physicochemical features, as well as the attachment, viability, and proliferation of umbilical cord-derived mesenchymal stem cells (hUC-MSC). Proteome profiles of decellularized hAM (D-hAM) were compared with hAM, and gene ontology (GO) enrichment analysis was performed. Proteomic data revealed that D-hAM retained a total of 249 proteins, predominantly comprised of extracellular matrix proteins including collagens (collagen I, collagen IV, collagen VI, collagen VII, and collagen XII), proteoglycans (biglycan, decorin, lumican, mimecan, and versican), glycoproteins (dermatopontin, fibrinogen, fibrillin, laminin, and vitronectin), and growth factors including transforming growth factor beta (TGF-β) and fibroblast growth factor (FGF) while eliminated most of the intracellular proteins. Scanning electron microscopy was used to analyze the epithelial and basal surfaces of D-hAM. The D-hAM displayed variability in fibril morphology and porosity as compared with hAM, showing loosely packed collagen fibers and prominent large pore areas on the basal side of D-hAM. Both sides of D-hAM supported the growth and proliferation of hUC-MSC. Comparative investigations, however, demonstrated that the basal side of D-hAM displayed higher hUC-MSC proliferation than the epithelial side. These findings highlight the importance of understanding the micro-environmental differences between the two sides of D-hAM while optimizing cell-based therapeutic applications.

Sterilization of Human Amniotic Membrane Using an Ozone Hydrodynamic System

Human amniotic membrane (hAM) is an important biomaterial for Tissue Engineering, due to its great regenerative properties and potential use as a scaffold. The most used procedure to sterilize biomaterials is gamma-irradiation, but this method can affect several properties, causing damage to the structure and reducing the growth factors. The present work evaluated the efficiency of a new method based on ozonated dynamic water for hAM sterilization. HAM fragments were experimentally contaminated with Staphylococcus aureus, Escherichia coli, Candida albicans, Staphylococcus epidermidis, and Clostridium sporogenes (106 CFU/mL) and submitted to sterilization process for 5, 10 and 15 min. The analyses did not reveal microbial activity after 10 min for S. aureus and C. sporogenes and after 15 min for E. coli and S. epidermidis. The microbial activity of C. albicans was reduced with the exposure time increase, but the evaluated time was insufficient for complete sterilization. The depyrogenation process was investigated for different ozonation times (15, 20, 25, 30, and 35 min) to evaluate the ozone sterilization potential and presented promising results after 35 min. The ozone effect on hAM structure was evaluated by histological analysis. A decrease in epithelium average thickness was observed with the exposure time increase. Furthermore, some damage in the epithelium was observed when hAM was exposed for 10 and 15 min. It can indicate that ozone, besides being effective in sterilization, could promote the hAM sample's de-epithelization, becoming a possible new method for removing the epithelial layer to use hAM as a scaffold.

Gelatin Methacryloyl (GelMA)-Based Biomaterial Inks: Process Science for 3D/4D Printing and Current Status

Tissue engineering for injured tissue replacement and regeneration has been a subject of investigation over the last 30 years, and there has been considerable interest in using additive manufacturing to achieve these goals. Despite such efforts, many key questions remain unanswered, particularly in the area of biomaterial selection for these applications as well as quantitative understanding of the process science. The strategic utilization of biological macromolecules provides a versatile approach to meet diverse requirements in 3D printing, such as printability, buildability, and biocompatibility. These molecules play a pivotal role in both physical and chemical cross-linking processes throughout the biofabrication, contributing significantly to the overall success of the 3D printing process. Among the several bioprintable materials, gelatin methacryloyl (GelMA) has been widely utilized for diverse tissue engineering applications, with some degree of success. In this context, this review will discuss the key bioengineering approaches to identify the gelation and cross-linking strategies that are appropriate to control the rheology, printability, and buildability of biomaterial inks. This review will focus on the GelMA as the structural (scaffold) biomaterial for different tissues and as a potential carrier vehicle for the transport of living cells as well as their maintenance and viability in the physiological system. Recognizing the importance of printability toward shape fidelity and biophysical properties, a major focus in this review has been to discuss the qualitative and quantitative impact of the key factors, including microrheological, viscoelastic, gelation, shear thinning properties of biomaterial inks, and printing parameters, in particular, reference to 3D extrusion printing of GelMA-based biomaterial inks. Specifically, we emphasize the different possibilities to regulate mechanical, swelling, biodegradation, and cellular functionalities of GelMA-based bio(material) inks, by hybridization techniques, including different synthetic and natural biopolymers, inorganic nanofillers, and microcarriers. At the close, the potential possibility of the integration of experimental data sets and artificial intelligence/machine learning approaches is emphasized to predict the printability, shape fidelity, or biophysical properties of GelMA bio(material) inks for clinically relevant tissues.

Comparison of the effects of preservation methods on structural, biological, and mechanical properties of the human amniotic membrane for medical applications

Amniotic membrane (AM), the innermost layer of the placenta, is an exceptionally effective biomaterial with divers applications in clinical medicine. It possesses various biological functions, including scar reduction, anti-inflammatory properties, support for epithelialization, as well as anti-microbial, anti-fibrotic and angio-modulatory effects. Furthermore, its abundant availability, cost-effectiveness, and ethical acceptability make it a compelling biomaterial in the field of medicine. Given the potential unavailability of fresh tissue when needed, the preservation of AM is crucial to ensure a readily accessible and continuous supply for clinical use. However, preserving the properties of AM presents a significant challenge. Therefore, the establishment of standardized protocols for the collection and preservation of AM is vital to ensure optimal tissue quality and enhance patient safety. Various preservation methods, such as cryopreservation, lyophilization, and air-drying, have been employed over the years. However, identifying a preservation method that effectively safeguards AM properties remains an ongoing endeavor. This article aims to review and discuss different sterilization and preservation procedures for AM, as well as their impacts on its histological, physical, and biochemical characteristics.

Processing methods for human amniotic membrane as scaffold for tissue engineering with mesenchymal stromal human cells

Tissue engineering is an interdisciplinary field that applies the principles of engineering and life sciences toward the development of biological substitutes that restore, maintain, or improve tissue function. The aims of this work were to compare chemically and physically processed human Amniotic Membranes (hAM) and analyze the cytocompatibility and proliferation rate (PR) of two primary human mesenchymal stromal cell lines, from different sources and donor conditions seeded over these scaffolds. The evaluated hAM processes were: cold shock to obtain a frozen amniotic membrane (FEAM) with remaining dead epithelial cells, denudation of hAM with trypsin for 20/10 min (DEAM20/10) or treatment with sodium dodecyl sulfate to decellularized hAM (DAM). All samples were sterilized with gamma radiation. The selection of the treated hAM to then generate composites was performed by scanning and transmission electron microscopy and characterization by X-ray diffraction, selecting DEAM10 and FEAM as scaffolds for cell seeding. Two sources of primary human stromal cells were used, both developed by our researchers, human Dental Pulp Stem Cells (hDPSC) from living donors and human Mesenchymal Stromal Cells (hMSC) from bone marrow isolated from brain dead donors. This last line of cells conveys a novel source of human cells that, to our knowledge, have not been tested as part of this type of construct. We developed four in vitro constructs without cytotoxicity signs and with different PR depending on the scaffolds and cells. hDPSC and hMSC grew over both FEAM and DEAM10, but DEAM10 allowed higher PR.

Biological importance of human amniotic membrane in tissue engineering and regenerative medicine

The human amniotic membrane (hAM) is the innermost layer of the placenta. Its distinctive structure and the biological and physical characteristics make it a highly biocompatible material in a variety of regenerative medicine applications. It also acts as a supply of bioactive factors and cells, which indicate the advantages over other tissues. In this review, we firstly discussed the biological properties of hAM-derived cells in vivo or in vitro, along with their stemness of markers, pointing out a promising source of stem cells for regenerative medicine. Then, we systematically summarized current knowledge on the collection, preparation, preservation, and decellularization of hAM, as well as their characteristics helping to improve the understanding of applications in tissue engineering. Finally, we highlighted the recent advances in which hAM has undergone additional modifications to achieve an adequate perspective of regenerative medicine applications. More investigations are required in utilizing appropriate modifications to enhance the therapeutic effectiveness of hAM in the future.

Human Acellular Amniotic Membrane as Skin Substitute and Biological Scaffold: A Review of Its Preparation, Preclinical Research, and Clinical Application

Human acellular amniotic membrane (HAAM) has emerged as a promising tool in the field of regenerative medicine, particularly for wound healing and tissue regeneration. HAAM provides a natural biological scaffold with low immunogenicity and good anti-infective and anti-scarring results. Despite its potential, the clinic application of HAAM faces challenges, particularly with respect to the preparation methods and its low mechanical strength. This review provides a comprehensive overview of HAAM, covering its preparation, sterilization, preclinical research, and clinical applications. This review also discusses promising decellularization and sterilization methods, such as Supercritical Carbon Dioxide (SC-CO2), and the need for further research into the regenerative mechanisms of HAAM. In addition, we discuss the potential of HAAM as a skin dressing and cell delivery system in preclinical research and clinical applications. Both the safety and effectiveness of HAAM have been validated by extensive research, which provides a robust foundation for its clinical application.

Evolution of biomimetic ECM scaffolds from decellularized tissue matrix for tissue engineering: A comprehensive review

Tissue engineering is essentially a technique for imitating nature. Natural tissues are made up of three parts: extracellular matrix (ECM), signaling systems, and cells. Therefore, biomimetic ECM scaffold is one of the best candidates for tissue engineering scaffolds. Among the many scaffold materials of biomimetic ECM structure, decellularized ECM scaffolds (dECMs) obtained from natural ECM after acellular treatment stand out because of their inherent natural components and microenvironment. First, an overview of the family of dECMs is provided. The principle, mechanism, advances, and shortfalls of various decellularization technologies, including physical, chemical, and biochemical methods are then critically discussed. Subsequently, a comprehensive review is provided on recent advances in the versatile applications of dECMs including but not limited to decellularized small intestinal submucosa, dermal matrix, amniotic matrix, tendon, vessel, bladder, heart valves. And detailed examples are also drawn from scientific research and practical work. Furthermore, we outline the underlying development directions of dECMs from the perspective that tissue engineering scaffolds play an important role as an important foothold and fulcrum at the intersection of materials and medicine. As scaffolds that have already found diverse applications, dECMs will continue to present both challenges and exciting opportunities for regenerative medicine and tissue engineering.

Antimicrobial peptide-loaded decellularized placental sponge as an excellent antibacterial skin substitute against XDR clinical isolates

Post-wound infections have remained a serious threat to society and healthcare worldwide. Attempts are still being made to develop an ideal antibacterial wound dressing with high wound-healing potential and strong antibacterial activity against extensively drug-resistant bacteria (XDR). In this study, a biological-based sponge was made from decellularized human placenta (DPS) and then loaded with different concentrations (0, 16 µg/mL, 32 µg/mL, 64 µg/mL) of an antimicrobial peptide (AMP, CM11) to optimize an ideal antibacterial wound dressing. The decellularization of DPS was confirmed by histological evaluations and DNA content assay. The DPS loaded with different contents of antimicrobial peptides (AMPs) showed uniform morphology under a scanning electron microscope (SEM) and cytobiocompatibility for human adipose tissue-derived mesenchymal stem cells. Antibacterial assays indicated that the DPS/AMPs had antibacterial behavior against both standard strain and XDR Acinetobacter baumannii in a dose-dependent manner, as DPS loaded with 64 µg/mL showed the highest bacterial growth inhibition zone and elimination of bacteria under SEM than DPS alone and DPS loaded with 16 µg/mL and 32 µg/mL AMP concentrations. The subcutaneous implantation of all constructs in the animal model demonstrated no sign of acute immune system reaction and graft rejection, indicating in vivo biocompatibility of the scaffolds. Our findings suggest the DPS loaded with 64 µg/mL as an excellent antibacterial skin substitute, and now promises to proceed with pre-clinical and clinical investigations.

Antimicrobial Effect of the Amniotic Membrane Isolated and Associated with Photodynamic Therapy

Microbial control through alternative therapies, such as the amniotic membrane (AM) and antimicrobial photodynamic therapy (aPDT), has been gaining prominence with the advancement of bacterial resistance to conventional treatments. This study aimed to evaluate the antimicrobial effect of AM isolated and associated with aPDT using the PHTALOX® as a photosensitizer (PS) against Staphylococcus aureus and Pseudomonas aeruginosa biofilms. The groups studied were: C+; L; AM; AM+L; AM+PHTX; and AM+aPDT. The irradiation parameters were 660 nm, 50 J.cm−2, and 30 mW.cm−2. Two independent microbiological experiments were carried out in triplicate, and the results were analyzed by CFU/mL counting and a metabolic activity test, both statistically analyzed (p < 0.05). The integrity of the AM was verified after the treatments by a scanning electron microscope (SEM). The groups AM, AM+PHTX, and, mainly, AM+aPDT showed a statistical difference when compared to C+ regarding the decrease in CFU/mL and metabolic activity. SEM analysis showed significant morphological alterations in the AM+PHTX and AM+aPDT groups. The treatments with AM isolated or associated with PHTALOX® were adequate. The association had potentiated the biofilm effect, and the morphological differences presented by AM after treatment did not hinder its antimicrobial effect, encouraging its use in biofilm formation locals.

An in vitro comparison of human corneal epithelial cell activity and inflammatory response on differently designed ocular amniotic membranes and a clinical case study

Amniotic membrane (AM) is a naturally derived biomaterial with biological and mechanical properties important to Ophthalmology. The epithelial side of the AM promotes epithelialization, while the stromal side regulates inflammation. However, not all AMs are equal. AMs undergo different processing with resultant changes in cellular content and structure. This study evaluates the effects of sidedness and processing on human corneal epithelial cell (HCEC) activity, the effect of processing on HCEC inflammatory response, and then a case study is presented. Three differently processed, commercially available ocular AMs were selected: (1) Biovance®3L Ocular, a decellularized, dehydrated human AM (DDHAM), (2) AMBIO2®, a dehydrated human AM (DHAM), and (3) AmnioGraft®, a cryopreserved human AM (CHAM). HCECs were seeded onto the AMs and incubated for 1, 4 and 7 days. Cell adhesion and viability were evaluated using alamarBlue assay. HCEC migration was evaluated using a scratch wound assay. An inflammatory response was induced by TNF-α treatment. The effect of AM on the expression of pro-inflammatory genes in HCECs was compared using quantitative polymerase chain reaction (qPCR). Staining confirmed complete decellularization and the absence of nuclei in DDHAM. HCEC activity was best supported on the stromal side of DDHAM. Under inflammatory stimulation, DDHAM promoted a higher initial inflammatory response with a declining trend across time. Clinically, DDHAM was used to successfully treat anterior basement membrane dystrophy. Compared with DHAM and CHAM, DDHAM had significant positive effects on the cellular activities of HCECs in vitro, which may suggest greater ocular cell compatibility in vivo.

Silver Nanoparticle Incorporated Human Amniotic Membrane Gel Accelerates Second-Degree Burn Wound Healing in Wister Rat

Burn has terrible consequences for the affected patients, making them vulnerable to wound infections and septicemia, which results in physical and mental disability and death, necessitating superior treatment options. Human amniotic membrane (HAM) has been utilized in burn wounds for decades for its low immunogenicity, angiogenic, anti-inflammatory, and antimicrobial properties and for promoting epithelialization. Silver nanoparticles (AgNPs), on the other hand, have antimicrobial properties and promote fibroblast migration. This study aimed to determine the burn wound healing potential of HAM + AgNPs. The gel was prepared using HAM (1% and 2%), AgNPs, carbopol 934, acrylic acid, glycerine, and triethanolamine, and different physical properties (pH, water absorption, swelling variation, spreadability, etc.) of the gel were determined; nuclear magnetic resonance (NMR) spectroscopy, antibacterial activity, brine shrimp lethality test, and histopathological observation were conducted. In vivo studies with Wistar rats demonstrated better healing capabilities than individual components of the gel. Wound contraction percentage after 20 days was 96.1 ± 0.27% which was highly significant (p < 0.0001), and the epithelialization period was 23.67 ± 2.05 days (p < 0.01) for HAM + AgNPs which was preferable to the positive control, AgNPs, HAM, and negative control; also, the histopathologic observation using hematoxylin and eosin, and Masson's trichrome staining were showed the better healing progress for HAM + AgNPs. Both HAM and AgNPs had antibacterial activities against gram-positive and gram-negative bacteria. These results indicated that the formulated HAM + AgNPs gel had remarkable effectiveness in burn wound healing compared to others. Further studies will be conducted to determine the molecular mechanism behind wound healing.

Functional acellular matrix for tissue repair

In view of their low immunogenicity, biomimetic internal environment, tissue- and organ-like physicochemical properties, and functionalization potential, decellularized extracellular matrix (dECM) materials attract considerable attention and are widely used in tissue engineering. This review describes the composition of extracellular matrices and their role in stem-cell differentiation, discusses the advantages and disadvantages of existing decellularization techniques, and presents methods for the functionalization and characterization of decellularized scaffolds. In addition, we discuss progress in the use of dECMs for cartilage, skin, nerve, and muscle repair and the transplantation or regeneration of different whole organs (e.g., kidneys, liver, uterus, lungs, and heart), summarize the shortcomings of using dECMs for tissue and organ repair after refunctionalization, and examine the corresponding future prospects. Thus, the present review helps to further systematize the application of functionalized dECMs in tissue/organ transplantation and keep researchers up to date on recent progress in dECM usage.

Bioscaffold developed with decellularized human amniotic membrane seeded with mesenchymal stromal cells: assessment of efficacy and safety profiles in a second-degree burn preclinical model

Therapies to deep burn injuries remain a global challenge. Human amniotic membrane (hAM) is a biomaterial that has been increasingly explored by the field of regenerative medicine. A decellularized hAM (DhAM) can be used as scaffold for mesenchymal stromal cells (MSCs) to grow without the loss of their stemness potential, allowing its application as cell therapy for wound healing. In this work, we associated DhAM with adipose-derived MSCs (DhAM + AD-MSCs), as a therapy strategy for second-degree burns in a preclinical model. Animals with induced second-degree burns were divided into four groups: control, which consists of a non-adherent gauze; a synthetic commercial dressing as the positive control (Control+); DhAM; and DhAM plus rat AD-MSCs (DhAM + AD-MSCs), followed by detailed and long term analysis (5 weeks). The macroscopical analysis showed the healing improvement in the wound area after the DhAM + AD-MSC treatment. Histological analysis also showed no alteration in the animal organs and a regular epithelial progression in comparison to the control. This observation was also confirmed by the analysis of suprabasal layers in the neoepidermis with CK10, showing a stratified and differentiated epithelium, when compared to Control and Control+. A strong CD73 (ecto-5'-nucleotidase) labeling was observed in the first 2 weeks postburn in dermis and epidermis. The expression in dermis was stronger in the second week in the middle of the wound, when comparing the Control+ with DhAM + AD-MSCs (p= 0.0238). In the epidermis the expression of CD73 was increased in all regions when compared to the control. This data suggests the involvement of this protein on wound healing. A low CD11b labeling was observed in DhAM + AD-MSCs treatment group mainly in the last treatment week, in comparison to Control and Control+ (p< 0.0001), which indicates a reduction in the inflammatory process. MSCs through CD73 can release high concentrations of adenosine, an immunosuppressive molecule, suggesting that this could be the mechanism by which the inflammation was better modulated in the DhAM + AD-MSCs group. The results obtained with this preclinical model confirm the effectiveness and safety of this low-cost and highly available dressing for future clinical application as a therapy for burn treatments.

Decellularized extracellular matrix scaffolds: Recent trends and emerging strategies in tissue engineering

The application of scaffolding materials is believed to hold enormous potential for tissue regeneration. Despite the widespread application and rapid advance of several tissue-engineered scaffolds such as natural and synthetic polymer-based scaffolds, they have limited repair capacity due to the difficulties in overcoming the immunogenicity, simulating in-vivo microenvironment, and performing mechanical or biochemical properties similar to native organs/tissues. Fortunately, the emergence of decellularized extracellular matrix (dECM) scaffolds provides an attractive way to overcome these hurdles, which mimic an optimal non-immune environment with native three-dimensional structures and various bioactive components. The consequent cell-seeded construct based on dECM scaffolds, especially stem cell-recellularized construct, is considered an ideal choice for regenerating functional organs/tissues. Herein, we review recent developments in dECM scaffolds and put forward perspectives accordingly, with particular focus on the concept and fabrication of decellularized scaffolds, as well as the application of decellularized scaffolds and their combinations with stem cells (recellularized scaffolds) in tissue engineering, including skin, bone, nerve, heart, along with lung, liver and kidney.

Decellularized Tissues for Wound Healing: Towards Closing the Gap Between Scaffold Design and Effective Extracellular Matrix Remodeling

The absence or damage of a tissue is the main cause of most acute or chronic diseases and are one of the appealing challenges that novel therapeutic alternatives have, in order to recover lost functions through tissue regeneration. Chronic cutaneous lesions are the most frequent cause of wounds, being a massive area of regenerative medicine and tissue engineering to have efforts to develop new bioactive medical products that not only allow an appropriate and rapid healing, but also avoid severe complications such as bacterial infections. In tissue repair and regeneration processes, there are several overlapping stages that involve the synergy of cells, the extracellular matrix (ECM) and biomolecules, which coordinate processes of ECM remodeling as well as cell proliferation and differentiation. Although these three components play a crucial role in the wound healing process, the ECM has the function of acting as a biological platform to permit the correct interaction between them. In particular, ECM is a mixture of crosslinked proteins that contain bioactive domains that cells recognize in order to promote migration, proliferation and differentiation. Currently, tissue engineering has employed several synthetic polymers to design bioactive scaffolds to mimic the native ECM, by combining biopolymers with growth factors including collagen and fibrinogen. Among these, decellularized tissues have been proposed as an alternative for reconstructing cutaneous lesions since they maintain the complex protein conformation, providing the required functional domains for cell differentiation. In this review, we present an in-depth discussion of different natural matrixes recently employed for designing novel therapeutic alternatives for treating cutaneous injuries, and overview some future perspectives in this area.

Fabrication of a multi-layered decellularized amniotic membranes as tissue engineering constructs

As a promising approach in tissue engineering, decellularization has become one of the mostly-studied research areas in tissue engineering thanks to its potential to bring about several advantages over synthetic materials since it can provide a 3-dimensional ECM structure with matching biomechanical properties of the target tissue. Amniotic membranes are the tissues that nurture the embryos during labor. Similarly, these materials have also been proposed for tissue regeneration in several applications. The main drawback in using amniotic membranes is the limited thickness of these materials since most tissues require a 3D matrix for an enhance regeneration. In order to prevent this limitation, here we report a facile fabrication methodology for multilayered amniotic membrane-based tissue constructs. The amniotic membranes of Wistar albino rats were first decellularized with the physical and chemical methods and utilized as scaffolds. Secondly, the prepared decellularized membranes were sutured to form a multilayered 3D structure. Within the study, 7 groups including control (PBS), were prepared based on physical and chemical decellularization methods. UV exposure and freezing techniques were used as a physical decellularization methods while hypertonic medium and SDS (sodium dodecyl sulfate) protocols were used as chemical decellularization methods. The combinations of both protocols were also used. In groups, A was the control and group B was applied just UV. In group C was applied UV and freezing. In addition to UV and freezing, in group D was applied hypertonic solution while group E was applied SDS (0.03 %). In group F was applied UV, freezing, hypertonic solution and SDS (0.03 %). In group G was applied UV, hypertonic solution, SDS (0.03 %) and freezing, respectively. Based on the histological and quantitative analyses, F and G groups were found as the most efficient decellularization protocols in rat amniotic membranes. Then, group F and G decellularized amniotic membranes were used to form scaffolds and thus-formed matrices were further characterized in vitro cell culture studies and mechanical tests. Cytotoxicity analyses performed using MTT showed a good cell viability in F and G groups scaffolds. The percentage viability rate was higher in G group (81.3 %) compared to F (75.33 %) and also cell viability in G group was found more meaningful according to p value which was obtained 0.007. Cellular adhesions after in vitro cell culture and morphology of scaffolds were evaluated by scanning electron microscopy (SEM). It was observed that the cells cultivated in equal amounts of tissue scaffolds were higher in the F compared to that observed in group G. The mechanical testing with 40 N force revealed 0.77 mm displacement in group F while it was 0.75 mm in group G. Moreover, according to force-controlled test, 2.9 mm displacement of F group and 1.2 mm displacement of G group was measured. As a result, this study shows that the multilayered decellularized amniotic membrane scaffolds support cell survival and adhesion and can form a flexible biomaterial with desired handling properties.

Aligned Poly(ε-caprolactone) Nanofibers Superimposed on Decellularized Human Amniotic Membrane Promoted Myogenic Differentiation of Adipose Derived Stem Cells

Objective

This study was designed to fabricate a suitable permanent scaffold for the normal aligned myotube formation and improve the process of myogenic differentiation of selected stem cells.

Materials and Methods

In this experimental study, an engineered scaffold composed of decellularized human amniotic membrane (DHAM) and electrospun fibers of poly(ε-caprolactone) (PCL) was fabricated and characterized. PCL nanofibers were superimposed on DHAM (PCL-DHAM) in two different patterns, including randomized fibers (Random) and aligned fibers (Aligned). Adipose derived stem cells (ADSCs) were isolated from adult Wistar rats and cultured on designed scaffold and induced to myotube differentiation. Using an MTT assay, the vitality of cells was determined. Then, myogenic cell differentiation was assessed using scan electron microscopy (SEM), immunofluorescence assay, and reverse transcription-polymerase chain reaction (RT-PCR).

Results

The mechanical properties of engineered PCL-DHAM composite improved significantly compared to DHAM as a control. The engineered PCL-DHAM promoted cell growth and high expression of myosin, Mhc2 and myogenin and thus enhanced the myotube formation.

Conclusion

These findings revealed that bio-composite membrane prepared from PCL nanofibers and DHAM, may represent a promising biomaterial as a desirable scaffold for applying in the bioengineered muscle repair.

Adipose-Derived Stromal Cells and Mineralized Extracellular Matrix Delivery by a Human Decellularized Amniotic Membrane in Periodontal Tissue Engineering

Periodontitis is a prevalent disease characterized by the loss of periodontal supporting tissues, bone, periodontal ligament, and cementum. The application of a bone tissue engineering strategy with Decellularized Human Amniotic Membrane (DAM) with adipose-derived stromal cells (ASCs) has shown to be convenient and valuable. This study aims to investigate the treatments of a rat periodontal furcation defect model with DAM, ASCs, and a mineralized extracellular matrix (ECM). Rat ASCs were expanded, cultivated on DAM, and with a bone differentiation medium for four weeks, deposited ECM on DAM. Periodontal healing for four weeks was evaluated by micro-computed tomography and histological analysis after treatments with DAM, ASCs, and ECM and compared to untreated defects on five consecutive horizontal levels, from gingival to apical. The results demonstrate that DAM preserves its structure during cultivation and healing periods, supporting cell attachment, permeation, bone deposition on DAM, and periodontal regeneration. DAM and DAM+ASCs enhance bone healing compared to the control on the gingival level. In conclusion, DAM with ASC or without cells and the ECM ensures bone tissue healing. The membrane supported neovascularization and promoted osteoconduction.

Freeze-dried bovine amniotic membrane as a cell delivery scaffold in a porcine model of radiation-induced chronic wounds

Background

Locoregional stem cell delivery is very important for increasing the efficiency of cell therapy. Amnisite BA (Amnisite) is a freeze-dried amniotic membrane harvested from bovine placenta. The objective of this study was to investigate the retention of cells of the stromal vascular fraction (SVF) on Amnisite and to determine the effects of cell-loaded Amnisite in a porcine radiation-induced chronic wound model.

Methods

Initially, experiments were conducted to find the most suitable hydration and incubation conditions for the attachment of SVF cells extracted from pig fat to Amnisite. Before seeding, SVFs were labeled with PKH67. The SVF cell-loaded Amnisite (group S), Amnisite only (group A), and polyurethane foam (group C) were applied to treat radiation-induced chronic wounds in a porcine model. Biopsy was performed at 10, 14, and 21 days post-operation for histological analysis.

Results

Retaining the SVF on Amnisite required 30 minutes for hydration and 1 hour for incubation. A PKH67 fluorescence study showed that Amnisite successfully delivered the SVF to the wounds. In histological analysis, group S showed increased re-epithelialization and revascularization with decreased inflammation at 10 days post-operation.

Conclusions

SVFs had acceptable adherence on hydrated Amnisite, with successful cell delivery to a radiation-induced chronic wound model.

Transplantation of decellularized and lyophilized amniotic membrane inhibits endometrial fibrosis by regulating connective tissue growth factor and tissue inhibitor of matrix metalloproteinase-2

Intrauterine adhesion (IUA) is a disease characterized by endometrial fibrosis caused by injury to the endometrium. In the present study, decellularized and lyophilized human amniotic membrane (DL-AM) material was transplanted in a rat model to explore the preventive effect against IUA. A total of 24 Sprague Dawley rats were randomly divided into an IUA (n=12) group and an IUA + DL-AM (n=12) group. To establish the model, the endometrium of the left uterus was scraped, while that of the right uterus was used as a control. In the IUA group, scraped uteri were sutured without any other treatment, whereas DL-AM was transplanted onto the scraped uteri in the IUA + DL-AM group. Uteri were resected for histological and immunohistochemical evaluation at 3, 7, 14 and 28 days after surgery. The results confirmed the development of IUA, which was accompanied by an increase in the rate of fibrotic area. Integral optical density (IOD) values of connective tissue growth factor (CTGF) were elevated in the IUA group, while matrix metalloproteinase-2 (MMP-2) decreased relative to the control group (P<0.05). After DL-AM transplantation, the IOD value of CTGF dropped, while MMP-2 increased compared with the IUA group (P<0.05). However, compared with that in the control group, the IOD value of CTGF was still higher, whereas MMP-2 was still lower in the IUA + DL-AM group (P<0.05). Furthermore, no evidence of endometrial regeneration was detected in both the IUA and IUA + DL-AM groups. Overall, these results indicated that in the rat model of IUA, transplantation of DL-AM had the potential to prevent the formation of fibrosis to a certain extent and may thus be an alternative strategy for managing the condition.

Tailoring electrospun mesh for a compliant remodeling in the repair of full-thickness abdominal wall defect - The role of decellularized human amniotic membrane and silk fibroin

Tailored electrospun meshes have been increasingly explored for abdominal wall defect repair in preclinical and clinical studies. However, the fabrication of a bioengineered mesh adapts to the intraperitoneal repair for a compliant remodeling remains a great challenge. In this study, we fabricated a functional mesh by combining polycaprolactone (PCL) with silk fibroin (SF) and decellularized human amniotic membrane (HAM) proportionally via electrospinning. SF was integrated with PCL (40:60 w/w) to regulate the structural flexibility. Micronized HAM was incorporated to PCL/SF (10:90 w/w) to provide a biocompatible milieu with functions being conferred to facilitate intraperitoneal repair. After the blend electrospinning, the PCL/SF/HAM mesh was characterized in vitro and implanted into the rat model with a full-thickness defect for a comprehensive evaluation in comparison to the PCL and PCL/SF meshes. The results demonstrated that electrospinning fabricated PCL stabilized the mechanical elongation toward approximating the native counterparts after integrating with SF. After integrating with HAM, which is coupled with diverse biomolecular compositions, the developed PCL/SF/HAM mesh provided a better microenvironment for cell proliferation and vasculogenic network over other meshes without HAM addition and possessed the functions capable of inhibiting transforming growth factor β1 (TGF-β1) expression and collagen secretion under inflammatory conditions. Moreover, the functional mesh developed less-intensive adhesion along with histologically weaker inflammatory response and foreign body reaction than the PCL and PCL/SF meshes after 90 days in vivo. During the remodeling process, the bioactive structure induced more pronounced neovascularization and remarkable incorporation of collagen and elastin fibers and contractile filaments for a mechanically sufficient and physiologically stiffness-matched healing. This tailor-made mesh expands the intraperitoneal applicability of conventional electrospun meshes for a compliant remodeling in the repair of abdominal wall defects.

Applications of Human Amniotic Membrane for Tissue Engineering

An important component of tissue engineering (TE) is the supporting matrix upon which cells and tissues grow, also known as the scaffold. Scaffolds must easily integrate with host tissue and provide an excellent environment for cell growth and differentiation. Human amniotic membrane (hAM) is considered as a surgical waste without ethical issue, so it is a highly abundant, cost-effective, and readily available biomaterial. It has biocompatibility, low immunogenicity, adequate mechanical properties (permeability, stability, elasticity, flexibility, resorbability), and good cell adhesion. It exerts anti-inflammatory, antifibrotic, and antimutagenic properties and pain-relieving effects. It is also a source of growth factors, cytokines, and hAM cells with stem cell properties. This important source for scaffolding material has been widely studied and used in various areas of tissue repair: corneal repair, chronic wound treatment, genital reconstruction, tendon repair, microvascular reconstruction, nerve repair, and intraoral reconstruction. Depending on the targeted application, hAM has been used as a simple scaffold or seeded with various types of cells that are able to grow and differentiate. Thus, this natural biomaterial offers a wide range of applications in TE applications. Here, we review hAM properties as a biocompatible and degradable scaffold. Its use strategies (i.e., alone or combined with cells, cell seeding) and its degradation rate are also presented.

Amniotic membrane matrix effects on calcineurin-NFAT-related gene expressions of SHED treated with VEGF for endothelial differentiation

The nuclear factor of activated T-cell (NFAT) signaling pathway is involved in angiogenesis following initiation by vascular endothelial growth factor (VEGF). A number of angiogenic genes have been associated with calcineurin in the NFAT pathway, forming a calcineurin-NFAT pathway. This study aims to investigate the involvement of four angiogenic genes within the calcineurin-NFAT pathway in the endothelial-like differentiation of stem cells from human exfoliated deciduous teeth (SHED) cultured on a human amniotic membrane (HAM) induced by VEGF. SHED were induced with VEGF for 24 h, then cultured on the stromal side of HAM. The cells were then further induced with VEGF until days 1 and 14. To understand the role of calcineurin, its potent inhibitor, cyclosporin A (CsA), was added into the culture. Results from SEM and H&E analyses showed SHED grew on HAM surface. Gene expression study of Cox-2 showed a drastically reduced expression with CsA treatment indicating Cox-2 involvement in the calcineurin-NFAT pathway. Meanwhile, IL-8 was probably controlled by another pathway as it showed no CsA inhibition. In contrast, high expression of ICAM-1 and RCAN1.4 by VEGF and CsA implied that these genes were not controlled by the calcineurin-NFAT-dependent pathway. In conclusion, the results of this study suggest the involvement of Cox-2 in the calcineurin-NFAT-dependent pathway while RCAN1.4 was controlled by NFAT molecule in endothelial-like differentiation of SHED cultured on HAM with VEGF induction.

Photo-crosslinkable amniotic membrane hydrogel for skin defect healing

The human amniotic membrane (HAM) collagen matrix derived from human placenta can be decellularized (dHAM) to form a natural biocompatible material. dHAM has different bioactive substances and has been used widely in human tissue engineering research. However, dHAM has some disadvantages, e.g., poor mechanical properties, easy degradation and inconvenient operation and use, so it is not conducive to large-area or full-thickness skin defect healing. To overcome these limitations, for the first time, dHAM was grafted with methacrylic anhydride (MA) to form photocrosslinked dHAM methacrylate (dHAMMA); dHAMMA was then blended with methacrylated gelatin (GelMA), followed by the addition of a photosensitizer for photocrosslinking to obtain the fast-forming GelMA-dHAMMA composite hydrogel. Further, GelMA-dHAMMA was found to have the porous structure of a bicomponent polymer network and good physical and chemical properties. In vitro experiments, GelMA-dHAMMA was found to promote fibroblast proliferation and α-smooth muscle actin (α-SMA) expression. In vivo investigations also demonstrated that GelMA-dHAMMA promotes wound collagen deposition and angiogenesis, and accelerates tissue healing. GelMA-dHAMMA inherits the good mechanical properties of GelMA and maintains the biological activity of the amniotic membrane, promoting the reconstruction and regeneration of skin wounds. Thus, GelMA-dHAMMA can serve as a promising biomaterial in skin tissue engineering. STATEMENT OF SIGNIFICANCE: Since the early 20th century, the human amniotic membrane (HAM) has been successfully used for trauma treatment and reconstruction purposes. dHAM has different bioactive substances and has been used widely in human tissue-engineering research. In this work, the dHAM and gelatin were grafted and modified by using methacrylic anhydride (MA) to form photocrosslinked dHAMMA and methacrylated gelatin (GelMA). Then, the dHAMMA and GelMA were blended with a photosensitizer to form the GelMA-dHAMMA composite hydrogel derived from gelatin-dHAM. GelMA-dHAMMA exhibits a bicomponent-network (BCN) interpenetrating structure. dHAM dydrogel has advantages, e.g., good mechanical properties, slow degradation and convenient operation, so it is conducive to large-area or full-thickness skin defect healing.

Synergistic effect of high-intensity interval training and stem cell transplantation with amniotic membrane scaffold on repair and rehabilitation after volumetric muscle loss injury

Despite the high regenerative capacity of skeletal muscle, volumetric muscle loss (VML) is an irrecoverable injury. One therapeutic approach is the implantation of engineered biologic scaffolds enriched with stem cells. The objective of this study is to investigate the synergistic effect of high-intensity interval training (HIIT) and stem cell transplantation with an amniotic membrane scaffold on innervation, vascularization and muscle function after VML injury. A VML injury was surgically created in the tibialis anterior (TA) muscle in rats. The animals were randomly assigned to three groups: untreated negative control group (untreated), decellularized human amniotic membrane bio-scaffold group (dHAM) and dHAM seeded with adipose-derived stem cells, which differentiate into skeletal muscle cells (dHAM-ADSCs). Then, each group was divided into sedentary and HIIT subgroups. The exercise training protocol consisted of treadmill running for 8 weeks. The animals underwent in vivo functional muscle tests to evaluate maximal isometric contractile force. Regenerated TA muscles were harvested for molecular analyses and explanted tissues were analyzed with histological methods. The main finding was that HIIT promoted muscle regeneration, innervation and vascularization in regenerated areas in HIIT treatment subgroups, especially in the dHAM-ADSC subgroup. In parallel with innervation, maximal isometric force also increased in vivo. HIIT upregulated neurotrophic factor gene expression in skeletal muscle. The amniotic membrane bio-scaffold seeded with differentiated ADSC, in conjunction with exercise training, improved vascular perfusion and innervation and enhanced the functional and morphological healing process after VML injury. The implications of these findings are of potential importance for future efforts to develop engineered biological scaffolds and for the use of interval training programs in rehabilitation after VML injury.

Simultaneous Effects of High Intensity Interval Training and Human Amniotic Membrane Scaffold on Rat Tibialis Anterior Vascularization and Innervation after Volumetric Muscle Loss Injury

BACKGROUND

Despite the high regenerative capacity of skeletal muscle, volumetric muscle loss (VML) is an irrecoverable injury. One therapeutic approach is the implantation of engineered biologic scaffolds.

OBJECTIVE

To investigate the simultaneous effect of high intensity interval training (HIIT) and the use of decellularized human amniotic membrane (dHAM) scaffolds on vascularization, growth factor, and neurotrophic factor gene expression, and muscle force generation in the tibialis anterior (TA) of rats after VML injury.

METHODS

VML injury was created in the TA of 24 rats, which were randomly divided into two groups-12 animals with and 12 without the use of a dHAM scaffold. After injury, each group was further divided into two groups of 6 animals each-sedentary and HIIT. Blood vessels were visualized and counted by hematoxylin and eosin staining. The PowerLab converter assay was used to evaluate isometric contraction force. The relative expression of neurotrophic factors and growth factor genes was measured with reverse transcription PCR (RT-PCR).

RESULTS

The number of blood vessels in the whole regenerating areas showed a significant difference in the dHAM-HIIT and dHAM-sedentary groups compared to the sedentary group without dHAM (p=0.001 and p=0.003, respectively). BDNF and GDNF mRNA levels in the dHAM-HIIT group were significantly (p<0.05) higher than those in other groups; NGF mRNA levels did not differ significantly among groups. Isometric contraction force in the dHAM-HIIT group was significantly (p=0.001) greater compared to the sedentary group without dHAM.

CONCLUSION

Combined use of dHAM scaffoldsand HIIT would improve the structure of the injured muscle during regeneration after VML by better vascular perfusion. HIIT leads to greater force generation and innervation by modulating neurotrophic factor synthesis in regenerating muscles.

Long-term preservation effects on biological properties of acellular placental sponge patches

Decellularization, preservation protocol and storage time influence the biomechanical and biological properties of allografts and xenografts. Here, we examined the consequences of storage time on the antibacterial, angiogenic and biocompatibility properties of the decellularized placental sponge (DPS) in vitro and in vivo. The DPS samples were preserved for one, three and six months at -20 °C. The decellularized scaffolds showed uniform morphology with interconnected pores compared with not decellularized sponges. Storage time did not interfere with collagen and vascular endothelial growth factor contents, and cytobiocompatibility for Hu02 fibroblast cells. Chorioallantoic membrane assay and subcutaneous implantation indicated a decreased new vessel formation and neovascularization in six months DPS sample compared with other experimental groups. The number of CD4⁺ and CD68⁺ cells infiltrated into the six months DPS on the implanted site showed a significant increase compared with one and three months sponges. The antibacterial activities and angiogenic properties of the DPS decreased over storage time. Three months preservation at -20 °C is suggested as the optimal storage period to retain its antibacterial activity and high stimulation of new vessel formation. This storage protocol could be considered for preservation of similar decellularized placenta-derived products with the aim of retaining their biological properties.

Human Amniotic Membrane: A review on tissue engineering, application, and storage

Human amniotic membrane (hAM) has been employed as scaffolding material in a wide range of tissue engineering applications, especially as a skin dressing and as a graft for corneal treatment, due to the structure of the extracellular matrix and excellent biological properties that enhance both wound healing and tissue regeneration. This review highlights recent work and current knowledge on the application of native hAM, and/or production of hAM-based tissue-engineered products to create scaffolds mimicking the structure of the native membrane to enhance the hAM performance. Moreover, an overview is presented on the available (cryo) preservation techniques for storage of native hAM and tissue-engineered products that are necessary to maintain biological functions such as angiogenesis, anti-inflammation, antifibrotic and antibacterial activity.

Gelatin Electrospun Mat as a Potential Co-culture System for In Vitro Production of Sperm Cells from Embryonic Stem Cells

Engineering of 3D substrates with maximum similarity to seminiferous tubules would help to produce functional sperm cells in vitro from stem cells. Here, we present a 3D electrospun gelatin (EG) substrate seeded with Sertoli cells and determine its potential for guided differentiation of embryonic stem cells (ESCs) toward germline cells. The EG was fabricated by electrospinning, and its morphology under SEM, as well as cytobiocompatibility for Sertoli cells and ESCs, was confirmed by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl tetrazolium bromide and cell attachment assay. Embryoid bodies (EBs) were formed from ESCs and co-cultured with Sertoli cells, induced with BMP4 for 3 and 7 consecutive days to induce the differentiation of EBs toward germline cells. The differentiation was investigated by immunocytochemistry (ICC), flow cytometry, and RT-PCR in four experimental groups of EBs (EBs cultured in gelatin-coated cell culture plates); Scaffold/EB (EBs cultured on EG); ESCs/Ser (EBs and Sertoli cells co-cultured on gelatin-coated cell culture plates without EG); and Scaffold/EB/Ser (EBs and Sertoli cells co-cultured on EG). All experimental groups exhibited a significantly increased MVH (germline-specific marker) and decreased c-KIT (stemness marker) expression when compared with the EB group. ICC and flow cytometry revealed that Scaffold/EB/Ser had the highest level of MVH and the lowest c-KIT expression at both 3 and 7 days postdifferentiation compared with other groups. RT-PCR results showed a significant increase in the germline marker (Dazl) and a significant decrease in the ESC stemness marker (Nanog) in Scaffold/EB compared to the EB group. The germline markers Gcna, Stella, Mvh, Stra8, Piwil2, and Dazl were significantly increased in Scaffold/EB/Ser compared to the Scaffold/EB group. Our findings revealed that the EG scaffold can provide an excellent substrate biomimicking the micro/nanostructure of native seminiferous tubules and a platform for Sertoli cell-EB communication required for growth and differentiation of ESCs into germline cells.

Engraftment of bioengineered three-dimensional scaffold from human amniotic membrane-derived extracellular matrix accelerates ischemic diabetic wound healing

Human amniotic membrane (HAM) is traditionally used for the treatment of non-healing wounds. However, high density of HAM-matrix (HAM-M) diminishes cellular contribution for successful tissue regeneration. Herein we investigated whether a bioengineered micro-porous three-dimensional (3D) HAM-scaffold (HAM-S) could promote healing in ischemic wounds in diabetic type 1 rat. HAM-S was prepared from freshly decellularized HAM. Then, 30 days after inducing diabetes, an ischemic circular excision was generated on rats' skin. The diabetic animals were randomly divided into untreated (Diabetic group), engrafted with HAM-M (D-HAM-M group) and HAM-S (D-HAM-S group). Also, non-diabeticuntreated rats (Healthy group) were considered as control. Stereological, molecular, and tensiometrical assessments were performed on post-surgical days 7, 14, and 21. We found that the volumes of new epidermis and dermis, the numerical density of epidermal basal cells and fibroblasts, the length density of blood vessels, the numbers of proliferating cells and collagen deposition as well as biomechanical properties of healed wound were significantly higher in D-HAM-S group in most cases compared those of the diabetic group, or even in some cases compared to D-HAM-M group. Furthermore, in D-HAM-S group, the transcripts for genes contributing to regeneration (Tgf-β, bFgf and Vegf) upregulated more than those of D-HAM-M group, when compared to diabetic ones. Overall, the HAM-S had more impact on delayed wound healing process compared to traditional use of intact HAM. It is therefore suggested that the bioengineered three dimensional micro-porous HAM-S is more suitable for cells adhesion, penetration, and migration for contributing to wounded tissue regeneration.

Biosynthesis, characterization and evaluation of the supportive properties and biocompatibility of DBM nanoparticles on a tissue-engineered nerve conduit from decellularized sciatic nerve

In this study, we examined the supporting effects of nano-demineralized bone matrix on the cultivation of Wharton's jelly stem cells on acellularized nerve scaffold. Demineralized bone matrix nanoparticles were prepared and characterized by several experiments. Decellularized sciatic nerve scaffolds were prepared and their efficiency was evaluated using histological stainings and biomechanical testing. Results of histological staining indicated that the integrity of the extra cellular matrix components was preserved. Also, the growth and viability of WJSCs on the scaffolds were significantly higher in DBM nanoparticle groups. We conclude that supportive properties of nano-DBM groups showed better cell viability and a suitable microenvironment for proliferation, retention, and adhesion of cells compared with other groups.

How preparation and preservation procedures affect the properties of amniotic membrane? How safe are the procedures?

Human amniotic membrane (AM) has been widely used for tissue engineering and regenerative medicine applications. AM has many favorable characteristics such as high biocompatibility, antibacterial activity, anti-scarring property, immunomodulatory effects, anti-cancer behavior and contains several growth factors that make it an excellent natural candidate for wound healing. To date, various methods have been developed to prepare, preserve, cross-link and sterilize the AM. These methods remarkably affect the morphological, physico-chemical and biological properties of AM. Optimization of an effective and safe method for preparation and preservation of AM for a specific application is critical. In this review, the isolation, different methods of preparation, preservation, cross-linking and sterilization as well as their effects on properties of AM are well discussed. For each section, at least one effective and safe protocol is described in detail.

Effects of acellular equine amniotic allografts on the healing of experimentally induced full-thickness distal limb wounds in horses

OBJECTIVE

To characterize the growth factors contained in equine amniotic membrane allograft (eAM; StemWrap scaffold and StemWrap+ injection) and to evaluate the effect of eAM on equine distal limb wound healing.

STUDY DESIGN

Prospective experimental controlled study.

SAMPLE POPULATION

Eight adult horses.

METHODS

Transforming growth factor (TGF)-β1, vascular endothelial growth factor (VEGF), epidermal growth factor, platelet-derived growth factor-BB, and prostaglandin E₂ (PGE₂ ) concentrations in StemWrap+ were assessed with enzyme-linked immunosorbent assay. Two full-thickness 6.25-cm² skin wounds were created on each metacarpus. On one forelimb, one wound was treated with eAM, and the other was left untreated (eAM control). On the contralateral limb, one wound was treated with a silicone dressing, and the other served as negative control. Three-dimensional images were obtained to determine wound circumference and surface area analyses at each bandage change until healed. Excessive granulation tissue was debrided once weekly for 4 weeks. Biopsy samples were taken to evaluate quality of wound healing via histologic and immunohistochemistry assays.

RESULTS

StemWrap+ contained moderate concentrations of TGF-β1 (494.10 pg/mL), VEGF (212.52 pg/mL), and PGE₂ (1811.61 pg/mL). Treatment of wounds with eAM did not affect time to healing or histologic quality of the healing compared with other groups but was associated with increased granulation tissue production early in the study, particularly on day 7.

CONCLUSION

Application of eAM resulted in increased granulation tissue production while maintaining appropriate healing of experimental wounds.

CLINICAL SIGNIFICANCE

Use of eAM is likely most beneficial for substantial wounds in which expedient production of large amounts of granulation tissue is desirable.

Decellularized human amniotic membrane: From animal models to clinical trials

The efficacy of decellularized products for healing of acute and chronic wounds mostly relies on physical and chemical properties, processing methods and host response. Human Amniotic Membrane (HAM) is considered as an effective and highly used wound dressing in clinic. According to the proposed decellularization protocols for developing of HAM, we have compared different protocols to introduce the most efficient methods, which can be used as a functional dermal matrix. In this study, different methods of HAM decellularization were used to achieve an optimal process. After achievement of appropriate decellularized method in vitro the amniotic membrane were examined in term of animal in vivo study and human clinical trial. The results of in vitro and in vivo assay indicate that the HAMs which were prepared with peracetic acid (2 M) had a significantly different in term of GAGs quantification, DNA isolation and quantification, histological assessment, collagen analysis, Cell-Tissue Interaction Study and cytotoxicity (P < 0/05). Tissue samples treated with peracetic acid (2 M) were more acceptable than that of samples prepared with other protocols in terms of preserving natural components and structure and removing of cell fragments. The peracetic acid-processed HAM was further functionally evaluated through in vivo assessments that can further lead to tissue reconstruction within the human host.

Crosstalk between chitosan and cell signaling pathways

The field of tissue engineering (TE) experiences its most exciting time in the current decade. Recent progresses in TE have made it able to translate into clinical applications. To regenerate damaged tissues, TE uses biomaterial scaffolds to prepare a suitable backbone for tissue regeneration. It is well proven that the cell-biomaterial crosstalk impacts tremendously on cell biological activities such as differentiation, proliferation, migration, and others. Clarification of exact biological effects and mechanisms of a certain material on various cell types promises to have a profound impact on clinical applications of TE. Chitosan (CS) is one of the most commonly used biomaterials with many promising characteristics such as biocompatibility, antibacterial activity, biodegradability, and others. In this review, we discuss crosstalk between CS and various cell types to provide a roadmap for more effective applications of this polymer for future uses in tissue engineering and regenerative medicine.

Concise Review: Fetal Membranes in Regenerative Medicine: New Tricks from an Old Dog?

The clinical application of the fetal membranes dates back to nearly a century. Their use has ranged from superficial skin dressings to surgical wound closure. The applications of the fetal membranes are constantly evolving, and key to this is the uncovering of multiple populations of stem and stem-like cells, each with unique properties that can be exploited for regenerative medicine. In addition to pro-angiogenic and immunomodulatory properties of the stem and stem-like cells arising from the fetal membranes, the dehydrated and/or decellularized forms of the fetal membranes have been used to support the growth and function of other cells and tissues, including adipose-derived mesenchymal stem cells. This concise review explores the biological origin of the fetal membranes, a history of their use in medicine, and recent developments in the use of fetal membranes and their derived stem and stem-like cells in regenerative medicine. Stem Cells Translational Medicine 2017;6:1767-1776.

Three-dimensional electrospun gelatin scaffold coseeded with embryonic stem cells and sertoli cells: A promising substrate for in vitro coculture system

In this study, we present an electrospun gelatin (EG) scaffold to mimic the extracellular matrix of the testis. The EG scaffold was synthesized by electrospinning and crosslinked with glutaraldehyde vapor to decrease its water solubility and degradation rate. The scanning electron microscope micrographs showed the homogenous morphology of randomly aligned gelatin fibers. The average diameter of gelatin fibers before and after crosslinking was approximately 180 and 220 nm, respectively. Modulus, tensile strength, and elongation at break values were as 161.8 ± 24.4 MPa, 4.21 ± 0.54 MPa, and 7.06 ± 2.12 MPa, respectively. The crosslinked EG showed 75.2% ± 4.5% weight loss after 14 days with no changes in the pH value of degradation solution. Cytobiocompatibility of the EG for sertoli cells and embryonic stem cells (ESCs) was determined in vitro. Sertoli cells were isolated from mouse testis and characterized by immunostaining and flow cytometry. The effects of EG on proliferation and attachment of both sertoli cells and ESCs were examined. The EG scaffolds exhibited no cytotoxicity for sertoli and ESCs. Both sertoli and ESCs were well attached and grown on EG. Coculture of sertoli and ESCs on EG showed better ESCs adhesion compared with ESCs alone. Our findings indicate the potential of EG as a substrate for proliferation, adhesion, and coculture of sertoli and ESCs and may be considered as a promising engineered microenvironment for in vitro coculture system with the aim of guiding stem cells differentiation toward sperm-producing cells.

Homing of adipose stem cells on the human amniotic membrane as a scaffold: A histological study

BACKGROUND

The human amniotic membrane (HAM) is a suitable and effective scaffold for cell culture and delivery, and adipose-derived stem cells (ADSCs) are an important source of stem cells for transplantation and chondrogenic differentiation.

OBJECTIVE

To assess the practicability of a cryopreserved HAM as a scaffold in cell proliferation and differentiation in vitro.

MATERIALS AND METHODS

In this experimental study, adipose tissue samples were harvested from the inguinal region of male patients aged 15-30 years. Flow cytometry was used to identify CD31, CD45, CD90, and CD105 markers in adipose stem cells. HAM was harvested from donor placenta after cesarean section, washed, trypsin-based decellularized trypsinized decellularized, and used as a scaffold via three methods: 1) ADSCs were differentiated into chondrocytes on cell culture flasks (monolayer method), and after 14 days of culture, the cells were transferred and cultured on both sides of the HAM; 2) ADSCs were cultured and differentiated directly on both sides of the HAM for 14 days (scaffold-mediated differentiation); and 3) chondrocytes were differentiated with micromass culture for 14 days, transferred on HAM, and tissue slides were histologically analyzed qualitatively.

RESULTS

Flow cytometry confirmed the presence of mesenchymal stem cells. Histological findings revealed that the cells adhered and grew well on the stromal layer of HAM. Among the three methods, scaffold-mediated differentiation of ADSCs showed the best results.

CONCLUSION

ADSCs have excellent attachment, viability, and differentiation capacity in the stromal side of HAM. Additionally, the direct culture and differentiation of ADSCs on HAM is more suitable than the culture of differentiated cells on HAM.

Modulation of Hypertrophic Scar Formation Using Amniotic Membrane/Electrospun Silk Fibroin Bilayer Membrane in a Rabbit Ear Model

Hypertrophic scarring is a dermal disorder resulting from collagen and other extra cellular matrix protein depositions following the deep trauma, severe burn injury, and surgery incisions. A variety of therapeutic procedures are currently available, however, achieving an ideal treatment method remains a challenge. In our recently published report, a 3D bilayered decellularized human amniotic membrane/electrospun silk fibroin membrane was fabricated and characterized for regenerative medical applications. To obtain a solid bind between two layers, the samples were immersed in 70% ethanol. In this study, the effects of amniotic membrane/electrospun silk fibroin on minimizing the postinjury hypertrophic scar formation were determined in the rabbit ear model. In vivo experiments were carried out to assess the bilayer membrane characteristics on full thickness hypertrophic scar at days 28 and 50 postimplantations. A significant decrease in collagen deposition and expression and increased expression and deposition of MMP1 in the wound bed were observed on the wounds dressed with bilayered membrane when compared to the amniotic membrane alone and controls (wound with no implant). The current study shows that our fabricated construct has potential as an efficient antiscarring wound dressing material and may also serve for the subsequent soft tissue engineering needs.

Development of a visible light, cross-linked GelMA hydrogel containing decellularized human amniotic particles as a soft tissue replacement for oral mucosa repair

Early effective treatment of oral mucosal defects is the key to ensuring defect healing and functional recovery. The application of human amniotic membrane (HAM) in promoting wound healing has been shown to be safe and effective. However, amniotic membrane is thin, easy to tear and difficult to handle. Combined with the natural forces at play in the oral cavity, this has restricted the clinical applications of HAM for healing of mucosal defects. Methacrylated gelatin (GelMA) has good mechanical strength and adhesion, and can be used as a bionic repair film to attach to the damaged surface of oral mucosa, but GelMA lacks bioactive substances and cannot promote the rapid repair of oral mucosal defects. The aim of this study was to design a type of composite GelMA hydrogel mixed with decellularized human amniotic particles (dHAP) as an oral mucosa substitute, to promote regeneration of defective mucosa by stimulating rapid angiogenesis. The composite substitute GelMA–dHAP was easy to synthesize and store, and easy to operate for repair of oral mucosal defects. We show the angiogenic potential of GelMA–dHAP on chick chorioallontoic membrane and the curative effect of GelMA–dHAP as a treatment in the rabbit oral mucosa defect model. In conclusion, this study confirms the effectiveness of GelMA–dHAP as an ideal soft tissue substitute for the repair of oral mucosal defects, overcoming the shortcomings of using HAM or GelMA alone.

Early effective treatment of oral mucosal defects is the key to ensuring defect healing and functional recovery.

Tissue-Engineered Grafts from Human Decellularized Extracellular Matrices: A Systematic Review and Future Perspectives

Tissue engineering and regenerative medicine involve many different artificial and biologic materials, frequently integrated in composite scaffolds, which can be repopulated with various cell types. One of the most promising scaffolds is decellularized allogeneic extracellular matrix (ECM) then recellularized by autologous or stem cells, in order to develop fully personalized clinical approaches. Decellularization protocols have to efficiently remove immunogenic cellular materials, maintaining the nonimmunogenic ECM, which is endowed with specific inductive/differentiating actions due to its architecture and bioactive factors. In the present paper, we review the available literature about the development of grafts from decellularized human tissues/organs. Human tissues may be obtained not only from surgery but also from cadavers, suggesting possible development of Human Tissue BioBanks from body donation programs. Many human tissues/organs have been decellularized for tissue engineering purposes, such as cartilage, bone, skeletal muscle, tendons, adipose tissue, heart, vessels, lung, dental pulp, intestine, liver, pancreas, kidney, gonads, uterus, childbirth products, cornea, and peripheral nerves. In vitro recellularizations have been reported with various cell types and procedures (seeding, injection, and perfusion). Conversely, studies about in vivo behaviour are poorly represented. Actually, the future challenge will be the development of human grafts to be implanted fully restored in all their structural/functional aspects.

Human acellular amniotic membrane implantation for lower third nasal reconstruction: a promising therapy to promote wound healing

Background

The lower third of the nose is one of the most important cosmetic units of the face, and its reconstructive techniques remain a big challenge. As an alternative approach to repair or regenerate the nasal tissue, the biomaterial-based strategy has been extensively investigated. The aim of this study is to determine the safety and efficacy of human acellular amniotic membrane (HAAM) to repair the full-thickness defects in the lower third of the nose in humans.

Methods

In this study, 180 patients who underwent excision of skin lesions of the lower third of the nose from 2012 to 2016 were included; of the patients, 92 received HAAM and Vaseline gauze treatments, and the other 88 patients received Vaseline gauze treatment only. The haemostasis time and the duration of operation were recorded during surgery; after surgery, the time to pain disappearance, scab formation and wound healing, and the wound healing rate were measured.

Results

Immediately after the HAAM implantation, a reduction of the haemostasis time and an accelerated disappearance of pain were observed. Compared with the control group, the formation and detachment of scab in patients who received the HAAM implantation were notably accelerated, postoperatively. When the diameter of the lesion exceeded 5 mm, the HAAM implantation was found to enhance the wound healing, although this enhancement was not seen when the diameter was less than 5 mm. Additionally, the HAAM implantation significantly reduced bleeding, wound infection and scar formation, postoperatively.

Conclusions

HAAM-assisted healing is a promising therapy for lower third nasal reconstruction leading to rapid wound healing and fewer complications and thus has considerable potential for extensive clinical application in repairing skin wounds.

Trial registration

ChiCTR1800017618, retrospectively registered on July 08, 2018.