The synergetic effect of bioactive molecule-loaded electrospun core-shell fibres for reconstruction of critical-sized calvarial bone defect-The effect of synergetic release on bone Formation

Promoting neurovascularized bone regeneration with a novel 3D printed inorganic-organic magnesium silicate/PLA composite scaffold

Critical-size bone defect repair presents multiple challenges, such as osteogenesis, vascularization, and neurogenesis. Current biomaterials for bone repair need more consideration for the above functions. Organic-inorganic composites combined with bioactive ions offer significant advantages in bone regeneration. In our work, we prepared an organic-inorganic composite material by blending polylactic acid (PLA) with 3-aminopropyltriethoxysilane (APTES)-modified magnesium silicate (A-M2S) and fabricated it by 3D printing. With the increase of A-M2S proportion, the hydrophilicity and mineralization ability showed an enhanced trend, and the compressive strength and elastic modulus were increased from 15.29 MPa and 94.61 MPa to 44.30 MPa and 435.77 MPa, respectively. Furthermore, A-M2S/PLA scaffolds not only exhibited good cytocompatibility of bone marrow mesenchymal stem cells (BMSCs), human umbilical vein endothelial cells (HUVECs), and Schwann cells (SCs), but also effectively promoted osteogenesis, angiogenesis, and neurogenesis in vitro. After implanting 10% A-M2S/PLA scaffolds in vivo, the scaffolds showed the most effective repair of cranium defects compared to the blank and control group (PLA). Additionally, they promoted the secretion of proteins related to bone regeneration and neurovascular formation. These results provided the basis for expanding the application of A-M2S and PLA in bone tissue engineering and presented a novel concept for neurovascularized bone repair.

An engineered lamellar bone mimicking full-scale hierarchical architecture for bone regeneration

Lamellar bone, compactly and ingeniously organized in the hierarchical pattern with 6 ordered scales, is the structural motif of mature bone. Each hierarchical scale exerts an essential role in determining physiological behavior and osteogenic bioactivity of bone. Engineering lamellar bone with full-scale hierarchy remains a longstanding challenge. Herein, using bioskiving and mineralization, we attempt to engineer compact constructs resembling full-scale hierarchy of lamellar bone. Through systematically investigating the effect of mineralization on physicochemical properties and bioactivities of multi-sheeted collagen matrix fabricated by bioskiving, the hierarchical mimicry and hierarchy-property relationship are elucidated. With prolongation of mineralization, hierarchical mimicry and osteogenic bioactivity of constructs are performed in a bidirectional manner, i.e. first rising and then descending, which is supposed to be related with transformation of mineralization mechanism from nonclassical to classical crystallization. Construct mineralized 9 days can accurately mimic each hierarchical scale and efficiently promote osteogenesis. Bioinformatic analysis further reveals that this construct potently activates integrin α5-PI3K/AKT signaling pathway through mechanical and biophysical cues, and thereby repairing critical-sized bone defect. The present study provides a bioinspired strategy for completely resembling complex hierarchy of compact mineralized tissue, and offers a critical research model for in-depth studying the structure-function relationship of bone.

A pilot study: Nano-hydroxyapatite-PEG/PLA containing low dose rhBMP2 stimulates proliferation and osteogenic differentiation of human bone marrow derived mesenchymal stem cells

Background

Bone morphogenetic protein 2 (BMP2) can enhance posterolateral spinal fusion (PLSF). The minimum effective dose that may stimulate mesenchymal stem cells however remains unknown. Nano-hydroxyapatite (nHAp) polyethylene glycol (PEG)/polylactic acid (PLA) was combined with recombinant human BMP2 (rhBMP2). We in vitro evaluated proliferation, differentiation, and osteogenic genes of human bone marrow mesenchymal stem cells with 0.5, 1.0, and 3.0 μg/mL rhBMP2 doses in this study.

Methods

In vitro experimental study was designed to proliferation by a real-time quantitative cell analysis system and the osteogenic differentiation by alkaline phosphatase (ALP) activity and osteogenic marker (Runx2, OPN, and OCN) gene expressions of human derived bone marrow mesenchymal stem cells (hBMMSCs). nHAp was produced by wet chemical process and characterized by Fourier transform infrared spectrophotometer, scanning electron microscopy, and energy-dispersive x-ray spectroscopy. PEG/PLA polymer was produced at a 51:49 molar ratio. 0.5, 1.0, and 3.0 μg/mL rhBMP2 and nHAp was combined with the polymers. hBMMSCs were characterized by multipotency assays and surface markers were assessed by flow cytometer. The hBMMSC-rhBMP2 containing nHAp-PEG/PLA composite interaction was evaluated by transmission electron microscopy. Proliferative effect was evaluated by real-time proliferation analysis, and osteogenic capacity was evaluated by ALP activity assay and qPCR.

Results

hBMMSC proliferation in the 0.5 μg/mL rhBMP2 + nHAp-PEG/PLA and the 1.0 μg/mL rhBMP2 + nHAp-PEG/PLA groups were higher compared to control. 1.0 μg/mL rhBMP2 + nHAp-PEG/PLA and 3.0 μg/mL rhBMP2 + nHAp-PEG/PLA containing composites induced ALP activity on days 3 and 10. 0.5 μg/mL rhBMP2 + nHAp-PEG/PLA application stimulated Runx2 and OPN gene expressions.

Conclusion

rhBMP2 + nHAp-PEG/PLA composites stimulate hBMMSC proliferation and differentiation. The nHAp-PEG/PLA composite with low dose of rhBMP2 may enhance bone formation in future clinical PLSF applications.

Coaxial TP/APR electrospun nanofibers for programmed controlling inflammation and promoting bone regeneration in periodontitis-related alveolar bone defect models

Periodontitis is a pathological dental condition that damages the periodontal tissue and leads to tooth loss. Bone regeneration in periodontitis-related alveolar bone defects remains a challenge for periodontists and tissue engineers because of the complex periodontal microenvironment. The inflammatory microenvironment is associated with poor osteogenesis; therefore, the reduction of inflammation is essential for bone regeneration in periodontitis-related alveolar bone defects. Here, we developed a programmed core-shell nanofibers that allows the sequential and controlled release of tea polyphenols (TP) and AdipoRon (APR) to control inflammation and promote bone regeneration to repair periodontitis-related alveolar bone defects. Core-shell nanofibers with a sequentially controlled release function were synthesized using electrospinning. We investigated the therapeutic effects of the nanofibers in vitro and in a mouse periodontitis model. The results of the release profiles demonstrated that TP was released rapidly in the early stages and APR was continuously released thereafter. In vitro experiments showed that the programmed core-shell nanofibers reduced the levels of proinflammatory cytokines and increased osteogenic differentiation in an inflammatory microenvironment. In vivo experiments, the programmed core-shell nanofibers ameliorated periodontal tissue inflammation and improved alveolar bone regeneration. Our results indicated that the programmed core-shell nanofibers with a sequential-release function provides an ideal strategy for repairing periodontitis-related alveolar bone defects, and its application in the treatment of diseases with spatiotemporal specificity is promising.

Coaxially Fabricated Dual-Drug Loading Electrospinning Fibrous Mat with Programmed Releasing Behavior to Boost Vascularized Bone Regeneration

In clinical treatment, the bone regeneration of critical-size defects is desiderated to be solved, and the regeneration of large bone segment defects depends on early vascularization. Therefore, overcoming insufficient vascularization in artificial bone grafts may be a promising strategy for critical-size bone regeneration. Herein, a novel dual-drug programmed releasing electrospinning fibrous mat (EFM) with a deferoxamine (DFO)-loaded shell layer and a dexamethasone (DEX)-loaded core layer is fabricated using coaxial electrospinning technology, considering the temporal sequence of vascularization and bone repair. DFO acts as an angiogenesis promoter and DEX is used as an osteogenesis inducer. The results demonstrate that the early and rapid release of DFO promotes angiogenesis in human umbilical vascular endothelial cells and the sustained release of DEX enhances the osteogenic differentiation of rat bone mesenchymal stem cells. DFO and DEX exert synergetic effects on osteogenic differentiation via the Wnt/β-catenin signaling pathway, and the dual-drug programmed releasing EFM acquired perfect vascularized bone regeneration ability in a rat calvarial defect model. Overall, the study suggests a low-cost strategy to enhance vascularized bone regeneration by adjusting the behavior of angiogenesis and osteogenesis in time dimension.

Programmed core-shell electrospun nanofibers to sequentially regulate osteogenesis-osteoclastogenesis balance for promoting immediate implant osseointegration

The biology of immediate post-extraction implant osseointegration is mediated by a coordinated cascade of osteoblast-osteoclast interactions. The aim of this study was to develop a dual-delivery system that allowed sequential release of substance P (SP) to promote bone regeneration and alendronate (ALN) to reduce bone resorption, which will improve the implant osseointegration. We used coaxial electrospinning to fabricate the core-shell poly lactic-co-glycolic acid (PLGA)/gelatin nanofibers, which consists of SP in the shell and ALN in the core. This programmed delivery system was shown to release SP and ALN sequentially to match the spatio-temporal specificity of bone healing. The migration assay demonstrated that the SP-ALN dual-delivery system increased bone marrow mesenchymal stem cells (BMSCs) transmigration. Besides, the expression of osteogenic/osteoclastic markers, Alizarin Red staining, tartrate-resistant acid phosphatase (TRAP) staining, F-actin staining and bone resorption experiment showed that the dual-delivery system can render a microenvironment favorable for osteogenic differentiation and adverse to osteoclastogenesis. Using a rat immediate implant model, we validated the promoted osteogenic property and osseointegration around the implants of SP-ALN dual-delivery system by micro-computed tomography (micro-CT) and histological analysis. These findings suggest that the dual-delivery system with time-controlled release of SP and ALN by core-shell nanofibers provides a promising strategy to facilitate immediate implant osseointegration through favorable osteogenesis. STATEMENT OF SIGNIFICANCE: Immediate implant placement is potentially challenged by the difficulties in achieving primary implant stability and early osteogenesis. Initial period of osteointegration is regulated by osteoblastic/osteoclastic cells resulting in a coordinated healing process. To have an efficient bone regeneration, the coaxial electrospinning was used to fabricate a programmed dual-delivery system. The SP released rapidly and favored for BMSCs migration and osteogenic differentiation, while the sustained release of ALN can reduce the bone resorption. The rat immediate implant model indicated that the SP-ALN dual-delivery system could present the promoted peri‑implant osteogenic property and osseointegration through modulating the osteogenesis-osteoclastogenesis balance. This work highlights the sequential dual delivery of SP and ALN has a promising potential of achieving enhanced osseointegration for immediate implant placement.

A Rapid and Convenient Approach to Construct Porous Collagen Membranes via Bioskiving and Sonication-Feasible for Mineralization to Induce Bone Regeneration

Porous mineralized collagen membranes efficiently promote bone regeneration. To generate them, we need to fabricate collagen membranes that are porous. However, the current fabrication method is primarily based on a bottom-up strategy, with certain limitations, such as a long manufacturing process, collagen denaturation, and failure to control fibril orientation. Using a top-down approach, we explore a novel method for constructing porous collagen membranes via the combined application of bioskiving and sonication. Numerous collagen membranes with well-aligned fibril structures were rapidly fabricated by bioskiving and then sonicated at 30, 60, 90, and 120 W for 20 min. This treatment allowed us to study the effect of power intensity on the physicochemical traits of collagen membranes. Subsequently, the prepared collagen membranes were immersed in amorphous calcium phosphate to evaluate the feasibility of mineralization. Additionally, the bioactivities of the membranes were assessed using preosteoblast cells. Tuning the power intensity was shown to modulate fibril orientation, and the porous membrane without denatured collagen could be obtained by a 20-min sonication treatment at 90 W. The prepared collagen membrane could also be further mineralized to enhance osteogenesis. Overall, this study offers a rapid and convenient approach for fabricating porous collagen membranes via bioskiving and sonication.

Effect of Different Additives on the Mechanical Properties of Gelatin Methacryloyl Hydrogel: A Meta-analysis

Gelatin methacryloyl (GelMA) hydrogel has adjustable physicochemical properties and a three-dimensional network structure for cell growth and hence a hot issue in the field of tissue engineering. However, its poor mechanical properties limit the application in the scaffold, especially as a bone scaffold. To date, many research studies have been carried out by adding some additives into GelMA to construct GelMA-based composites to improve the mechanical properties. However, there is a controversy as to whether the additives can improve the mechanical properties of GelMA. Herein, meta-analysis was used to evaluate the influence of the additives on the mechanical properties of GelMA-based composites, which can provide reference for the further enhancement of mechanical properties of GelMA. In this study, meta-analysis was adopted to investigate the influence of additives on the mechanical properties of GelMA composites; composites with different concentrations of GelMA, that is, ≥10% (w/v), 5-10% (w/v), and ≤5% (w/v) were found in 23 literatures and heterogeneity could be found among these references. Accordingly, it is found that additives can improve the mechanical properties in each concentration.

β-Tricalcium phosphate contained beaded-fiber scaffolds characterized by high early osteoinductive activity for vascularized bone regeneration

The calcium phosphate component and surface topology of a scaffold are considered the two main factors that influence osteogenic differentiation. This research reports a one-step but effective scaffold preparation method that can regulate the morphology of nanofibers and control the distribution and release behavior of calcium phosphate nanoparticles (CaPs). Two beaded-on-string CaPs-loaded electrospun scaffolds (PT7.5 and PT4.5) with composite microstructures of microbeads and nanofibers were fabricated by adjusting the concentration of the electrospinning solution. The presence of the composite microstructure was conducive to the surface exposure and sustained release of bioactive components, which in turn could significantly promote the biomineralization and protein adsorption of the scaffold. A study of the human umbilical vein endothelial cells (HUVECs) and rat-bone marrow-derived mesenchymal stem cells (rBMSCs) revealed that cells cultured on scaffolds with composite microstructures (especially PT4.5) could enhance tube formation of the HUVECs and osteogenic differentiation of rBMSCs. The PT4.5 with significantly different microbead and nanofiber sizes presented the high potential to improve the early osteoinductive activity and angiogenesis of the CaPs-loaded electrospun scaffold and expand its advantage in bone regeneration.

Multidrug-loaded electrospun micro/nanofibrous membranes: Fabrication strategies, release behaviors and applications in regenerative medicine

Electrospun micro/nanofibrous membranes (EFMs) have been widely investigated as local drug delivery systems. Multiple drugs can be simultaneously incorporated into one EFM to create synergistic effects, reduce side effects, and play their respective roles in the complex physiological processes of tissue regeneration and postoperative adhesion prevention. Due to the versatile electrospinning techniques, sustained and programmed release behaviors of multiple drugs could be achieved by modulating the structure of the EFMs and the location of the drugs. In this review, various multidrug incorporation approaches based on electrospinning are overviewed. In particular, the advantages and limitations of each drug incorporation technique, the methods to control drug release and the effect of one drug release on another are discussed. Then the applications of multidrug-loaded EFMs in regenerative medicine, including wound healing, bone regeneration, vascular tissue engineering, nerve regeneration, periodontal regeneration and adhesion prevention are comprehensively reviewed. Finally, the future perspectives and challenges in the research of multidrug-loaded EFMs are discussed.

The synergetic effect of bioactive molecule-loaded electrospun core-shell fibres for reconstruction of critical-sized calvarial bone defect-The effect of synergetic release on bone Formation

OBJECTIVES

Bone regeneration is a complex process modulated by multiple growth factors and hormones during long regeneration period; thus, designing biomaterials with the capacity to deliver multiple bioactive molecules and obtain sustained release has gained an increasing popularity in recent years. This study is aimed to evaluate the effect of a novel core-shell electrospun fibre loaded with dexamethasone (DEX) and bone morphogenetic protein-2 (BMP-2) on bone regeneration.

MATERIALS AND METHODS

The core-shell electrospun fibres were fabricated by coaxial electrospinning technology, which were composed of poly-D, L-lactide (PLA) shell and poly (ethylene glycol) (PEG) core embedded with BMP-2 and DEX-loaded micelles. Morphology, hydrophilicity, gradation, release profile of BMP-2 and DEX, and cytological behaviour on bone marrow mesenchymal stem cells (BMSCs) were characterized. Furthermore, the effect on bone regeneration was evaluated via critical-sized calvarial defect model.

RESULTS

The electrospun fibres were featured by the core-shell fibrous architecture and a suitable degradation rate. The sustained release of DEX and BMP-2 was up to 562 hours. The osteogenic gene expression and calcium deposition of BMSCs were significantly enhanced, indicating the osteoinduction capacity of electrospun fibres. This core-shell fibre could accelerate repair of calvarial defects in vivo via synergistic effect.

CONCLUSIONS

This core-shell electrospun fibre loaded with DEX and BMP-2 can act synergistically to enhance bone regeneration, which stands as a strong potential candidate for repairing bone defects.