In the dental implant era, why do we still bother saving teeth?

Clinical Efficacy of CBCT and 3D-Printed Replicas in Molar Autotransplantation: A Controlled Clinical Trial

BACKGROUND/AIM

To evaluate the efficacy of the combined cone-beam (CBCT)/3D-replicas protocol on the clinical and radiographic outcomes of autotransplanted molars.

MATERIAL AND METHODS

Controlled clinical trial registered ISRCTN13563091 from August 2019 to September 2022. Patients aged 13-22 years requiring permanent premolar extraction and having at least one non-erupted third molar were enrolled at the Institute of Stomatology, Stradins University, Riga, Latvia. Patients in the 3D-replicas (n = 30) underwent maxillary CBCT scans and had 3D-printed replicas of the third molar fabricated, while the control group (n = 28) did not. The clinical outcomes included tooth mobility, bleeding on probing, and periodontal pocket depth assessed at 3, 6, and 12 months. The radiographic outcomes included root development, obliteration, periapical status, and crown changes at 12 months.

RESULTS

Of the 55 patients assigned to interventions, 46 completed the study. No significant differences in survival and radiographic outcomes were found between the control (n = 22) and 3D-replica group (n = 24): root development (p = 0.3), root resorption (p = 0.057), periapical status (p = 0.7), and crown/root ratio change (p = 0.4). Logistic regression showed no significant associations between radiologic predictors (root resorption: p = 0.4; periapical status: p > 0.9; root development: p = 0.8). Significant clinical outcome predictors included total operative time (β = 0.0043, p = 0.049), Moorrees' stage (stage 4: β = -0.31, p < 0.001; stage 5: β = -0.39, p < 0.001), and four donor placement times (β = 0.93, p < 0.001), but group assignment was not a significant predictor.

CONCLUSIONS

The CBCT/3D-replica protocol showed no significant differences in the clinical or radiological outcomes. The high success rates in both groups suggest that the protocol is valuable primarily for optimizing surgical efficiency and as a training tool for clinicians.

Application of Minimally Invasive Prosthodontics With an Esthetic 16-Unit Rehabilitation of the Dental Arches for a Patient With Anterior Dental Crowding and a Relatively Deep Bite: A Case Report

Minimally invasive dentistry indicates an operative intervention to correct or manipulate a dental anomaly or lesion while focusing on preserving the original tissues as much as possible. Losing teeth or teeth loss is one of the most common problems patients have always suffered from due to different reasons, such as caries, trauma, or periodontal problems. In cases of multiple teeth loss, oral rehabilitation is usually indicated. Aesthetic reconstruction of a patient's mouth with crowded teeth and a deep bite is challenging for prosthodontists. This case report shows an applicable conservative approach of minimally invasive dentistry in this situation while maintaining vertical dimension and centric occlusion.

Periodontal Patients' Perceptions and Knowledge of Dental Implants-A Questionnaire Study

Background: Highly prevalent tooth loss is observed among populations around the world. To restore masticatory function and satisfactory aesthetics, missing teeth must be replaced. Dental implants are increasingly used for this purpose. This study aimed to assess periodontal patients' knowledge and attitudes towards dental implants. Methods: 467 anonymous questionnaires of periodontal patients were analyzed. The population participants were divided according to gender, age, education and place of residence. In the statistical analysis, the chi-squared test of independence was used (p < 0.05). The main questions addressed patients' knowledge about dental implants and the factors influencing their decision to undergo implantation. Results: The majority of periodontal patients were aware of dental implants and the importance of oral hygiene in their maintenance. However, the population studied had many knowledge deficits, especially on the technical and biological aspects of implants. The lack of knowledge about peri-implantitis was surprising in the group seeking professional periodontal care. Patients obtained information mainly from the internet and from family and friends, with their dentists being the third source. Good functional and aesthetic outcomes would encourage them to undergo the implantation procedure, and high cost and the possibility of complications were the most discouraging factors. Conclusions: Given the growing popularity of implant treatment, patients should be provided with evidence-based knowledge about indications and possible contraindications to implants to make informed decisions.

Surgical Extrusion of Three Premolars to Re-establish the Biological Width: Case Series

AIM

This case series was to describe the use of surgical extrusion for three different cases as a technique to re-establish the biological width in patients with insufficient crown height.

BACKGROUND

Surgical extrusion serves as an important means to reestablishing a proper biological width. Such method provides an excellent alternative for the restoration of teeth with insufficient ferrule and ensuring a suitable dental restoration.

CASES DESCRIPTIONS

This case series describes the management of three different cases with compromised teeth #25, #35, and #44, respectively. The approach involved the surgical extrusion of the compromised sites from subgingival to supragingival and the splinting of the teeth using a semi-rigid splint. A successful prognosis was observed on follow-up visits.

CONCLUSION

This technique is a good alternative for general practitioners because of its easy implementation and time efficiency. In addition, the method requires less equipment and provides for adequate space for the re-establishment of biological width.

CLINICAL SIGNIFICANCE

Such technique can re-establish a healthy biological width, the existing occlusion can be maintained without alterations, and it demonstrated the suitability of surgical extrusion technique in such clinical situations. Case selection is equally important. Cases with single-rooted teeth with fractures or caries in proximity to the marginal bone level without vertical root fractures generally provide positive outcomes on providing this treatment. How to cite this article: Boreak N, Al Moaleem MM, Zain AA, et al. Surgical Extrusion of Three Premolars to Re-establish the Biological Width: Case Series. J Contemp Dent Pract 2024;25(6):593-598.

Computer-aided design and computer-aided manufacturing poly (methyl methacrylate) interim veneers for immediate esthetic restoration of autotransplanted teeth

Autotransplanted teeth in the maxillary anterior region should be restored or reshaped as soon as possible for functional and esthetic reasons as well as the well-being of the patient. However, such tooth restorations are frequently not carried out immediately after tooth transplantation because the process could have a negative impact on the healing process. The development of a simple, immediate, and atraumatic esthetic interim restoration would be of great benefit to both the clinician and patient and address all the concerns caused by immediately preparing the tooth postoperatively and cementing a permanent restoration. This report describes the use of CAD-CAM technology to create poly (methyl methacrylate) veneers preoperatively that can be cemented extraorally on the extracted donor tooth for the immediate and interim recontouring of autotransplanted anterior teeth.

Perforating dental implants and maxillary sinus pathology

OBJECTIVES

To study the association between perforation dental implants into the maxillary sinus cavity and the development of sinus pathology.

METHODS

We retrospectively examined 3732 computerized tomography (CT) scans to detect maxillary implants. The detected scans were grouped based on apparent or lack of perforated dental implants in the maxillary sinus (study and control group, respectively). Clinical data was gathered including the CT indication, patients' demographics, comorbidities and medications, implant features, and the radiographic appearance of the maxillary sinuses. We conducted a logistic regression to identify risk factors to develop radiopaque thickening in the sinuses.

RESULTS

Included in the study were 198 patients with 719 maxillary implants; of these, 236 and 483 implants were in the study and control groups, respectively. Sinus opacification was associated with implants' perforations (p < 0.001), diameter, and side and place (p < 0.05). Implants' perforation (OR = 3.679; 95% CI = 1.891-7.157) and diameter (OR = 1.608; 95% CI = 1.067-2.424), sinus floor augmentation (OR = 2.341; 95% CI = 1.087-5.042), male gender (OR = 2.703; 95% CI = 1.407-5.192), and smoking (OR = 6.073; 95% CI = 2.911-12.667) were associated with ipsilateral sinus fullness.

CONCLUSIONS

A first large study on the association between maxillary dental implant and sinus pathology. Dental implant perforation is associated with sinus opacification. Considering dental implant diameter, rather than vertical depth of penetration into the sinus, as an important criterion when examining perforated dental implants necessitates a new approach to clinical decision-making.

Effect of Calcium Silicate-Based Intracanal Medicament and Calcium Hydroxide on Growth Factor TGF-β1 Release from Root Canal Dentine

Effective root canal disinfection and the subsequent release of natural growth factors from dentin are crucial to the success of regenerative endodontic procedures. This study evaluated the effect of newly introduced calcium silicate-based temporary intracanal medicament Bio-C Temp and calcium hydroxide-based material UltraCal XS on the release of transforming growth factor β1 (TGF-β1) from root canal dentin. Twenty-two intact and fully developed human premolars from patients aged 15-18 were shaped and irrigated according to the current clinical recommendations. The teeth were then gently split in half, and the root canal dentin of paired samples was covered with Bio-C Temp or UltraCal XS. After 3 weeks of incubation, the specimens were conditioned with 17% EDTA and the collected solution was subjected to the quantification of the released TGF-β1 by performing an ELISA. One-way analysis of variance (ANOVA), followed by Tukey's test, was selected to determine the statistically significant differences between the groups at the 0.95 confidence level. The highest mean value of released TGF-β1 (1993.1 pg/mL) was detected in the control group, where the root canal dentin was conditioned with 17% EDTA alone. Regarding the experimental groups, Bio-C Temp released a statistically significantly higher amount of TGF-β1 (282.14 pg/mL) compared to UltraCal XS (114.28 pg/mL; p = 0.0158). Bio-C Temp affected the release of growth factors from root canal dentin less than UltraCal XS and may therefore serve as an intracanal medicament for regenerative endodontic procedures.

Effect of 3D printed replicas on the duration of third molar autotransplantation surgery: A controlled clinical trial

BACKGROUND/AIM

This study aimed to develop a protocol that combines cone-beam computed tomography (CBCT), software, and 3D printing to design 3D replicas for tooth autotransplantation. The goal was to evaluate the impact of this approach on the extraoral time of the donor teeth and the total surgical time, thereby enhancing surgical efficiency and outcomes.

MATERIALS AND METHODS

A non-randomized trial (protocol 10.1186/ISRCTN13563091) was conducted at Riga Stradins University, enrolling 46 patients (13-22 years old) who required molar extraction and possessed a non-erupted third molar. The patients were sequentially assigned to a 3D replica group (24 patients) or a control group (22 patients). The primary outcome measured was the extra-alveolar time of the donor tooth, and the secondary outcome was the total duration of surgery. Both were assessed using a sample size capable of detecting a 10-min difference. A generalized linear model adjusted for various factors was used to test for significant time differences (p < .05) between the groups.

RESULTS

Forty-six patients were included in this analysis. The effect of using 3D replicas was not statistically significant and was associated with a decrease in the extraoral time of the donor tooth in seconds (β = -9.35, 95% CI [-40.86, 22.16]). For the total surgical time in minutes, the use of 3D replicas had a statistically significant impact, reducing the operation duration in minutes (β = -13.42, 95% CI [-24.50, -2.34]). No early complications were observed in either group, with all teeth present at 3-4 weeks post-surgery.

CONCLUSIONS

The integration of 3D printing technology can enhance the efficiency of autotransplantation surgeries, primarily by reducing surgical time.

New Perspectives in Third Molar Auto-Transplantation: Literature Review and a Case Report of Clinical, Financial and Forensic Implications

Third molar extraction is the most common procedure in oral and maxillofacial surgery. Third molars are considered less functional than other teeth and are often extracted. Sometimes, they are also used for auto-transplantation for the benefit of oral rehabilitation. Since many biological factors are involved in this surgical approach, herein, we outline a review of the biological characteristics of medico-legal/forensic interest, in addition to presenting a successful clinical case. A scoping review of currently available research data (following the principles of PRISMA-ScR or the Preferred Reporting Items for Systematic Reviews and Meta-Analyses extension for Scoping Reviews) on third molar auto-transplantation was conducted by drawing upon the main databases (Scopus, PubMed, Google Scholar and LILACS) to evaluate biological and clinical characteristics possibly relatable to forensic issues. All the collected data were summarized and elaborated on for the purpose of this article. A patient underwent extraction of the right upper first molar and auto-transplantation of the unerupted ipsilateral third molar. Many biologic and clinical factors are involved in the success of this clinical procedure. Knowledge of third molar anatomy, of its development and viable surgical approaches are all essential elements; just as important are the treatment of the tooth before and after transplantation and the integrity of the periodontal ligament. Follow-up of the clinical case for 5 years made it possible to verify the stability of the procedure over time. Third molar auto-transplantation is feasible and cost-effective. However, the use of third molars as donor teeth in auto-transplantation may have medico-legal implications. The lack of official protocols and consistent evidence-based guidelines for operators still prevent such a procedure from becoming mainstream; therefore, it is viewed with suspicion by clinicians and patients, even though the biological factors herein detected point to a reasonably high degree of safety. The understanding of many specific biological and clinical factors involved in the stability of third molar auto-transplantation allows for a thorough understanding of the forensic implications relevant to clinical practice. Effective communication and information provision are therefore of utmost importance, in the interest of both patients and doctors.

Survival, complications, and patient-reported outcomes of endodontically treated teeth versus dental implant-supported prostheses: A systematic review

STATEMENT OF PROBLEM

Decision making for compromised teeth involving the choice between endodontic treatment and tooth extraction followed by an implant-supported prosthesis is challenging. However, systematic reviews examining studies using the same patients or clinical settings to provide conclusive evidence regarding the best approach are lacking.

PURPOSE

The purpose of this systematic review was to compare the survival rate, complications, failure, and patient-reported outcomes of endodontically treated teeth and implant-supported prostheses.

MATERIAL AND METHODS

After the protocol had been registered at the International Prospective Register of Systematic Reviews (PROSPERO), PubMed, Scopus, and the Cochrane Database of Systematic Reviews were searched from database inception to July 2023 with no language restriction. A manual literature search was performed. The review protocol was based on the population, intervention, comparator, outcome, and study design (PICOS) criteria and included all observational and experimental human studies that directly compared the survival, complications, and patient-reported outcomes of teeth with pulpal and periapical disease after all types of endodontic treatment and subsequent restoration and tooth extraction followed by an implant-supported prosthesis. The risk of bias of the included studies was assessed by using the modified Newcastle-Ottawa scale.

RESULTS

Eight observational studies were included in this systematic review: 3 retrospective cohort and 5 case-control studies. Three included studies revealed no difference in survival rate between endodontically treated teeth and implant-supported prostheses during the first 3 years, but the survival of endodontically treated teeth declined over time with a higher failure rate than implant-supported prostheses. In contrast, the other 3 included studies reported lower survival rate for implant-supported prostheses and more complications. In terms of patient-reported outcomes, patients were generally satisfied with both treatment modalities, with notable improvements in oral health-related quality of life in those receiving endodontic treatment.

CONCLUSIONS

Whether implant-supported prostheses or endodontically treated teeth are better in terms of survival outcome is unclear. Improved oral health-related quality of life was found after endodontic treatment.

LONG-TERM OUTCOMES OF IMPLANT PLACEMENT VERSUS TOOTH PRESERVATION IN PERIODONTALLY COMPROMISED TEETH MAY BE COMPARABLE

ARTICLE TITLE AND BIBLIOGRAPHIC INFORMATION

Sarafidou K, Lazaridi I, Gotsis S, Kirmanidou Y, Vasilaki D, Hirayama H, Michalakis K. Tooth preservation vs. extraction and implant placement in periodontally compromised patients: A systematic review and analysis of studies. J Prosthodont. 2022 Oct;31(8):e87-e99. doi:10.1111/jopr.13560. Epub 2022 Aug 2. PMID: 35794083 SOURCE OF FUNDING: No external funding was received for this research.

TYPE OF STUDY/DESIGN

Systematic review (without meta-analysis).

Forensic exploration of endodontic cements: Unveiling macroscopic and radiographic changes under high temperatures

OBJECTIVE

To evaluate macroscopically and radiographically the behavior of four endodontic sealers submitted to high temperatures, with forensic purposes.

METHODS

Sixty-four lower anterior teeth were included. All teeth were endodontically treated, and simulation of external cervical resorption (ECR) was performed. Half of the sample was filled with AH-Plus™ cement and had ECR sealed with Bio-C-Repair™. The other 32 teeth were filled with Bio-C-Sealer™ cement and had their respective ECR sealed with MTA-Repair™. Then, all teeth were introduced into a bovine bone block to simulate the alveolar bone. The teeth were submitted to incineration at temperatures of 600, 800, 1000, and 1140 °C. All teeth were radiographed before and after incineration. The pre-and post-incineration radiopacity of cements and dentin were evaluated using the ImageJ™ software and compared using a t-test for paired samples.

RESULTS

It was possible to confirm color change and appearance of cracks in the tissues and dental materials tested, varying according to the temperature. Radiographically, it was observed that the dental crowns completely detached at 1000 ° and 1140 °C, and, only at 1140 °C, the roots showed cracks. Regarding the radiopacity, there was a significant difference in the shades of gray in AH-Plus™ when subjected to 1000 ° and 1140 °C, and at 600 ° and 1000 °C in Bio-C-Sealer™. In Bio-C-Repair™ and MTA-Repair™, a difference was observed at 600 ° and 1140 °C.

CONCLUSIONS

There were macroscopic and radiographic alterations of the materials. This data is important in Forensic Dentistry and may contribute to identifying carbonized victims.

Tooth intentional replantation from 1964 to 2023: A bibliometric analysis

BACKGROUND/AIM

There is no thorough overview of intentional tooth replantation techniques. We performed a bibliometric analysis of the development of intentional tooth replantation.

MATERIALS AND METHODS

A comprehensive search of the Web of Science and SCOPUS databases was conducted in February 2023. Original articles and reviews of human studies with "intentional replantation" or synonyms in the titles, abstracts, or keywords were included. A descriptive analysis of bibliographic data, co-occurrence analysis, and coupling of publications was performed. Multivariate analysis was used to explore the bibliometric parameters associated with the citation counts.

RESULTS

The study included 171 papers, which were co-authored by 500 individuals affiliated with 217 institutions from 28 countries/regions. The USA contributed the greatest number of publications, followed by China, and Japan. The USA had 694 citations, followed by Japan (210), and Turkey (210). The Journal of Endodontics and Dental Traumatology contributed the most citations. Five directions for future research were identified based on the coupling relationships of publications, including "managing vertical root fractures with adhesive resin using the intentional replantation technique," "intentional replantation for periodontally hopeless or endodontically compromised teeth," "intentional replantation for treating abnormalities of morphological development," "outcomes and prognosis factors of intentional replantation," and "treating root replacement resorption by intentional replantation." Multivariate analysis showed that the publication year, Journal Citation Reports ranking of journals, study design, and disease type were predictors of citation counts.

CONCLUSIONS

This bibliometric analysis provides a comprehensive description of the intentional replantation technique. The USA published the greatest volume of papers and generated the most citations. The Journal of Endodontics and Dental Traumatology are considered the most influential. The Journal Citation Reports journal ranking (Q1, Q2), study design (case reports, cohort studies), and disease type (crown root fractures) were associated with the citation counts.

Autotransplantation for Restoration of Dentition Defects After Excision of Jaw Cysts

Bone defect caused by jaw cystectomy has always been the main factor affecting postoperative wound healing and is also the common cause of maxillofacial bone defect, which brings challenges to the subsequent restoration of missing teeth. In this paper, the authors report a 22-year-old young woman who had a mandibular cyst in the left lower posterior tooth area. She underwent mandibular bone cyst excision and simultaneous extraction of teeth 36 and 37. One and two months after the removal of the mandibular bone cyst, autologous tooth transplantation was performed in stages from tooth 28 to tooth 36 and from tooth 18 to tooth 37. The case shows that tooth autotransplantation is a viable option for the restoration of dentition defects after the excision of jaw cysts, which can promote the healing of the bone defect after the operation.

Esthetic reconstruction of a localized severely resorbed anterior maxilla associated with peri-implantitis: A clinical report

This clinical report described the esthetic reconstruction of a localized severely resorbed right anterior maxilla associated with peri-implantitis. For vertical bone augmentation, guided bone regeneration surgery was performed by raising a flap with the remote incision technique, followed by soft tissue grafting and vestibuloplasty. The biologically oriented preparation technique was used to improve the health and stability of the peri-implant tissues. The surgical treatment and a novel method of prosthetic rehabilitation provided excellent esthetic and functional outcomes.

Contemporary issues in the management of dental trauma

Contemporary diagnosis and management of traumatic dental injuries requires a multifaceted understanding of the pathological and psychological impact over a patient's lifetime. The legacy of dental trauma injuries can have repercussions for the dentition and supporting tissues, requiring complicated multidisciplinary clinical input. Foresight is required to ensure optimal aesthetic and functional outcomes. Mitigating risks and maximising benefits in patients presenting with polytrauma can be challenging, but if optimally managed at the acute presentation, the long-term burden to the patient and the clinician is reduced. This paper aims to discuss the contemporary clinical dilemmas, challenges and controversies related to the management of dental trauma.

Risk factors associated with implant sites prepared by orthodontic treatment: a systematic review

The patient's health and quality of life would probably be improved with dental implant. This study aimed to evaluate the risk factors associated with dental implants place by orthodontic treatment. In this study, information on risk factors associated with implants of sites prepared, radiology stereotypes and hospitalized were obtined from databases such as Scopus, Google scholar and PubMed, and 58 articles were included for this purpose. After analyzing the articles, 24 articles were not accepted and 34 articles were accepted, then, 16 articles were miscarriage and 18 articles were scientific sources. The results showed that orthodontic treatment has a significant effect on a person's sense of beauty and would possibly increase self-confidence and quality of life. The stability of the implant in the healing phase depends on the quality and quantity of the bone. Also, the width of the bone is one of the important issues in creating a successful treatment. When an implant fails, problems and symptoms of failure usually occur within the first year after surgery. After one year, there is only about a 1% chance of failure, and on average only 1% of all implants fail each year.

Clinical applications and outcomes of the surgical tooth extrusion technique: A bibliometric analysis from 1982 to 2023

STATEMENT OF PROBLEM

The surgical extrusion technique has been advocated for severely damaged teeth as well as for intruded and unerupted teeth. However, a quantitative literature analysis is lacking.

PURPOSE

The purpose of this bibliometric analysis was to provide a comprehensive overview of surgical extrusion, assess the applications and outcomes, and evaluate topics for future research.

MATERIAL AND METHODS

An electronic search was conducted in leading databases in April 2023. Human studies with surgical tooth extrusion or synonyms in titles or abstracts were included. A bibliographic analysis, co-occurrence analysis, and coupling of publications were performed. The analysis of variance was used to assess the characteristics of the subgroups based on indications. The survival rate was evaluated by using the Kaplan-Meier method in the R software program (α=.05).

RESULTS

Fifty-one studies from 1982 to 2023 were included. The Journal of Dental Traumatology and the Journal of Prosthetic Dentistry combined published approximately one-third of the papers and acquired the most citations. The burst detection of keywords revealed 4 popular research topics: the Benex extraction system, chlorhexidine for infection control, rigid or semi-rigid splints to decrease the risk of complications, and novel restorative materials to improve esthetics. An overall survival rate of 96.36% was reported among 316 participants with 330 extruded teeth. No significant differences were found in study types, geographic distribution, year of publication, or citation counts among the 4 subgroups (surgical extrusion for subgingival fractures, extensive caries, intruded teeth, and unerupted teeth). A significant difference was observed among the Kaplan-Meier curves of the 4 subgroups (P=.030).

CONCLUSIONS

Surgical extrusion may be used to save otherwise nonrestorable teeth, and the procedure has shown promising survival rates when teeth are properly selected and the procedure is well executed. Subgingival fractures and extensive caries near bone level are the predominant indications, as well as intruded and unerupted teeth. Surgical extrusion is a reliable treatment option to facilitate tooth restoration for severely damaged teeth, especially for maxillary anterior teeth.

Initial Development of an Immediate Implantation Model in Rats and Assessing the Prognostic Impact of Periodontitis on Immediate Implantation

BACKGROUND

To establish an immediate implantation rat model and to evaluate the effects of pre-existing periodontitis and two different socket rinse solutions on immediate implantation prognosis.

METHODS

Sprague-Dawley (SD) rats were randomly divided into three groups before immediate implantation, including the control group, the group with experimentally induced periodontitis (EP), in which rats have been experimentally induced periodontitis before implantation, and the group with induced periodontitis and with extraction sockets rinsed with three percent H2O2 (EP-H2O2), in which rats have been induced periodontitis before implantation, and extraction sockets were rinsed with three percent H2O2. Periodontitis was induced by ligating the thread around the molars for four weeks. Six weeks after titanium alloy implants were self-tapped and left to heal transmucosally, maxillae were dissected after the clinical examination to perform micro-CT and histological analysis.

RESULTS

An immediate implantation model was successfully built in rats. There was no significant difference in implant survival rates between the EP and control groups. However, the clinical examination results, micro-CT analysis, and histological analysis in EP and EP-H2O2 groups showed a significantly worse prognosis than in the control group. Three percent H2O2 showed a similar effect with saline.

CONCLUSION

This study presented a protocol for establishing a rat immediate implantation model and showed that periodontitis history might negatively affect the prognosis of immediate implantation. These findings urge caution and alternative strategies for patients with periodontal disease history, enhancing the long-term success of immediate implantation in dental practice. Additionally, the comparable outcomes between 3% H2O2 and saline suggest the use of saline as a cost-effective and safer alternative for implant site preparation in dental practice.

Evaluation of Behavior of Castable versus Machined Solid Abutments for Morse Tapper Implant Connection: A Clinical Retrospective Study

Objective: The primary objective of the present retrospective clinical study was to evaluate and compare the clinical performance presented by castable abutments developed for the MT system versus intermediate machined abutments, specifically regarding prosthetic or implant fractures/loss; the secondary objective was to verify the looseness of the abutments and the behavior of the peri-implant soft tissues. Methods: This clinical retrospective study was conducted on patients rehabilitated between 2019 and 2020. Inclusion criteria were patients in good general health, with an implants-supporting single crown; with solid machined abutments (control group) or castable UCLA abutments; with a connection portion (base) machined in cobalt-chrome (test group) over Morse taper DuoCone implants in the posterior mandible area; and at least two years in function. Clinical assessment was carried out by the same professional, considering the following parameters: (A) prosthetic: (i) loosening of the fixation screw, (ii) fracture of the screw and (iii) the number of times the patient had some type of complication after the installation of the prostheses were evaluated; (B) biological: (i) without keratinized mucosa (KM), (ii) 1 mm or less, (iii) between 1 and 2 mm and (iv) greater than 2 mm of KM width; and the presence or absence of mucositis. Furthermore, radiographic evaluation was performed in order to assess the marginal bone loss. These evaluations permitted to compare the groups analyzed and patients enrolled. Data were statistically analyzed, with the level of significance set at α = 0.05. Results: 79 patients with 120 MT implants were evaluated (80 castable UCLA abutments and 40 machined solid abutments). The follow-up was from 2 to 4 years. There was a 100% implant survival rate. Therefore, the control group showed two fractured abutments (5%) and no abutment loosening (95% for prosthetic survival rate), whereas the test group showed no abutment fracture but nine loosening screws (11.3%) (100% for prosthetic survival rate). Keratinized mucosa was considered thin or absent in 19 implants in the control group (47.5%) and 42 in the test group (52.5%). Mucositis was found in 11 implants in the control group (27.5%) and 27 in the test group (33.8%). A positive correlation was observed between the width of keratinized mucosa and mucositis (r = 0.521, p = 0.002). The mean marginal bone loss was 2.3 mm, ranging from 1.1 to 5.8 mm. No correlation was observed when considering marginal bone loss versus the three parameters (implant diameter, implant length and time of the prosthesis in function). Conclusions: The results suggest that UCLA-type abutments are a viable option for rehabilitating implants with Morse taper connections, suggesting lower fracture risk. Further research is necessary to confirm these findings and thoroughly evaluate the clinical performance and long-term outcomes.

Osseointegration of Dental Implants in Patients with Congenital and Degenerative Bone Disorders: A Literature Review

Aims and Objectives

The aim of this study was to describe the mechanism of dental implants osseointegration in patients with congenital and degenerative genetic bone disorders.

Materials and Methods

A PubMed and Scopus documents search was carried out between November 2021 in the, using words such as "osseointegration," "degenerative disease," "congenital disease," and "dental implants."

Results

The thirteen articles selected dealt with dental implants osseointegration in patients with congenital and degenerative bone disorders. The influence and repercussion of these diseases on the bone system, as well as the osseointegration process were described from healing to bone remodeling. In addition, certain articles described some considerations to improve the osseointegration process in patients suffering from these types of conditions.

Conclusions

Within the limitations of this literature review we can conclude that osseointegration in patients with ectodermal dysplasia and osteoporosis could be achieved. However, the planning process for dental implant placement in these patients should be more meticulous and individualized considering the degree of tissue involvement as well as the patient's age and skeletal development compared to systemically healthy patients.

Review of guidance for the selection of regenerative endodontics, apexogenesis, apexification, pulpotomy, and other endodontic treatments for immature permanent teeth

This review guidance is a work in progress because the limitations of regenerative endodontics are still being discovered. The endodontic treatments for immature permanent teeth with a necrotic pulp can vary considerably among endodontic practitioners. Whereas, regenerative endodontic treatments are growing in popularity and are creating ever more complex treatment protocols, involving revascularization and/or autologous platelet-rich plasma and scaffolds to elicit host stem cell de novo tissue formation to reestablish the vitality of immature teeth for the purpose of continuing root maturation. Despite much evolving controversy about their potential benefits, risks, prognosis, and contraindications, this review is aimed to discuss how to ensure that regenerative endodontic treatments are successful, by strictly adhering to case selection criteria, and following precise steps to accomplish and monitor the success of the treatment. A review of the endodontic literature was performed, together with practical observations of the problems and outcomes of performing regenerative endodontic treatments. Traditionally, apexification has long been the treatment of choice provided to immature teeth with a necrotic pulp. Regenerative endodontics may be provided as an alternative to apexification, if the tooth and patient meet all the case selection criteria, and if there are no contraindications. Regenerative endodontics has the unique potential advantage of being able to continue the root development in immature permanent teeth, thereby potentially saving the teeth for the lifetime of the patient. Whereas, conventional endodontic root canal treatment, Cvek partial pulpotomy, apexogenesis, and apexification, should always be provided when these treatments are more likely to benefit the patient because they can be more successful than regenerative endodontics.

Multidisciplinary Approach for Autotransplantation and Restoration of a Maxillary Premolar into an Area of an Avulsed Anterior Tooth: A Case Report with a 6-Year Follow-up

The loss of an anterior tooth because of avulsion has been reported in up to 3% of dental injuries. Management alternatives, such as implant-supported restorations and a fixed partial denture, are contraindicated in growing patients because of the continuous growth of the alveolar process. At the same time, orthodontic treatment for gap closure will result in asymmetry and will require adjustment of the adjacent healthy teeth. Therefore, restoring a missing tooth imposes a treatment challenge, especially in children and young adults. Tooth autotransplantation is a treatment modality with high reported survival and success rates that overcome these mentioned limitations. It might also help to preserve the alveolar bone and the soft tissues. This case report describes a multidisciplinary approach for managing a 13-year-old boy who lost his right maxillary central incisor because of a fall. Management included autotransplantation of the left maxillary second premolar to the site of the lost right maxillary central incisor, management of external inflammatory resorption with an endodontic treatment, orthodontic treatment, and aesthetic restoration of the area with composite resin crowns that can be adapted to the expected changes of the jaws during the craniofacial growing period. At the 6-year follow-up, the teeth demonstrated a positive outcome.

Association of Number of Teeth with ADL/IADL in Korean Middle-Aged and Older Adults: An Analysis of the 7th Korean Longitudinal Study of Aging

We determined the association between the number of natural and implant teeth with activities of daily living (ADL) and instrumental ADL (IADL) levels in middle-aged and older adults aged ≥ 55 years. We included 6,925 participants, who underwent a computer-assisted personal interview in the 7th Korean Longitudinal Study of Aging. After controlling for general characteristics, the associations between the number of natural and implant teeth with ADL and IADL levels were examined using multiple regression analysis. The participants had 21.2 natural teeth and 1.08 implant teeth on average. The ADL and IADL levels were 0.61 and 1.56, 0.40 and 1.16, and 1.10 and 0.31 in participants with ≤ 9, 10-19, and ≥ 20 teeth, respectively. There was no significant association between ADL and the number of natural and implant teeth (p > 0.05). However, a one-unit increase in IADL score was associated with a reduced number of natural (β = -0.031, p < 0.001) and implant (β = -0.194, p = 0.006) teeth. Difficulties regarding IADL were associated with fewer natural and implant teeth, suggesting that maintaining and managing the number of teeth is critical to promoting the health of middle-aged and older adults.

Stability of implant-abutment connection in three different systems after fatigue test

Aim

Abutment screw loosening of implant-supported prosthesis causes a mismatch between the abutment and the implant. This screw loosening is influenced by the implant-abutment connection type, however, with contradictory results reported in different studies. The present study evaluates the stability of abutment-implant connections in three different systems before and after the fatigue test.

Settings and Design

Thirty implants (4.3 mm in diameter and 12 mm in length) were divided into three groups of 10: Implantium, Zimmer, and straight internal hexagonal connection (SIC) implants.

Materials and Methods

Two torques of 35 Ncm with an interval of 10 min were applied, followed by measuring removal torque value (RTV). The samples were re-torqued and then underwent a simulation of 1-year chewing clinical performance of dental implant under axial force of 400 N, with a frequency of 8 Hz (one million cycles). After fatigue test, the RTV was calculated and recorded.

Statistical Analysis

The mean RTVs obtained before and after cyclic load were analyzed by SPSS version 22 software using multivariate analysis.

Results

Significant differences in RTV and role of cyclic loading were found between SIC and Implantium groups (P = 0.006 and 0.021, respectively), as well as between Zimmer and SIC groups (P = 0.032 and 0.006, respectively), but not between Zimmer and Implantium groups (P = 0.771 and 0.248, respectively).

Conclusion

The type of connection could affect the screw loosening, the preload loss, and the implant component stability. SIC group revealed the highest RTVs before and after cyclic loading.

A Porcine Model Using Adipose Stem Cell-Loaded Scaffolds for Alveolar Ridge Augmentation

Tooth loss greatly affects a person's quality of life and many turn to dental implants to replace lost teeth. The success of a dental implant depends on the amount of alveolar bone supporting the implant, and thus, bone augmentation is often necessary to preserve or build up bone volume in the alveolar ridge. Bone can be augmented with autogenous bone, allografts, or xenografts, but the limitations of such natural bone grafts prompt researchers to develop synthetic scaffolds supplemented with cells and/or bioactive agents as alternative bone grafts. The translation of these combination scaffolds from the laboratory to the clinic requires reliable experimental models that can simulate the clinical conditions in human patients. In this article, we describe the use of a porcine alveolar defect model as a platform to evaluate the efficacy of a novel combination of a three-dimensional-printed polycaprolactone-tricalcium phosphate (PCL-TCP) scaffold and adipose-derived mesenchymal stem cells (AD-MSCs) in lateral alveolar augmentation. The surgical protocol for the defect creation and regenerative surgery, as well as analytical methods to determine the extent of tissue regeneration, are described and discussed.

Effects of a Novel Cold Atmospheric Plasma Treatment of Titanium on the Proliferation and Adhesion Behavior of Fibroblasts

Cold plasma treatment increases the hydrophilicity of the surfaces of implants and may enhance their integration with the surrounding tissues. The implaPrep prototype device from Relyon Plasma generates cold atmospheric plasma via dielectric barrier discharge (DBD). In this study, titanium surfaces were treated with the implaPrep device for 20 s and assessed as a cell culture surface for fibroblasts. One day after seeding, significantly more cells were counted on the surfaces treated with cold plasma than on the untreated control titanium surface. Additionally, the viability assay revealed significantly higher viability on the treated surfaces. Morphological observation of the cells showed certain differences between the treated and untreated titanium surfaces. While conventional plasma devices require compressed gas, such as oxygen or argon, the implaPrep device uses atmospheric air as the gas source. It is, therefore, compact in size and simple to handle, and may provide a safe and convenient tool for treating the surfaces of dental implants, which may further improve the implantation outcome.

Intraoral scanning reduces procedure time and improves patient comfort in fixed prosthodontics and implant dentistry: a systematic review

OBJECTIVES

The primary aim of this systematic review was to evaluate whether intraoral scanning (IOS) is able to reduce working time and improve patient-reported outcome measures (PROMs) compared to conventional impression (CI) techniques, taking into account the size of the scanned area. The secondary aim was to verify the effectiveness of IOS procedures based on available prosthodontic outcomes.

MATERIALS AND METHODS

Electronic and manual literature searches were performed to collect evidence concerning the outcomes of IOS and CI performed during the treatment of partially and complete edentulous patients for tooth- or implant-supported restorations. Qualitative analysis was conducted to evaluate the time efficiency and PROMs produced by the two different techniques. Clinical prosthodontic outcomes were analyzed among the included studies when available.

RESULTS

Seventeen studies (9 randomized controlled trials and 8 prospective clinical studies) were selected for qualitative synthesis. The 17 included studies provided data from 430 IOS and 370 CI performed in 437 patients. A total of 7 different IOS systems and their various updated versions were used for digital impressions. The results demonstrated that IOS was overall faster than CI independent of whether quadrant or complete-arch scanning was utilized, regardless of the nature of the restoration (tooth or implant supported). IOS was generally preferred over CI regardless of the size of the scanned area and nature of the restoration (tooth- or implant-supported). Similar prosthodontic outcomes were reported for workflows implementing CI and IOS.

CONCLUSIONS

Within the limitations of this systematic review, IOS is faster than CI, independent of whether a quadrant or complete arch scan is conducted. IOS can improve the patient experience measured by overall preference and comfort and is able to provide reliable prosthodontic outcomes.

CLINICAL RELEVANCE

Reduced procedure working time associated with the use of IOS can improve clinical efficiency and the patient experience during impression procedures. Patient-reported outcome measures (PROMs) are an essential component of evidence-based dental practice as they allow the evaluation of therapeutic modalities from the perspective of the patient. IOS is generally preferred by patients over conventional impressions.

Current Concepts in the Management of Periodontitis

Periodontitis is a common disorder affecting >40% of adults in the United States. Globally, the severe form of the disease has a prevalence of 11%. In advanced cases, periodontitis leads to tooth loss and reduced quality of life. The aetiology of periodontitis is multifactorial. Subgingival dental biofilm elicits a host inflammatory and immune response, ultimately leading to irreversible destruction of the periodontium (i.e. alveolar bone and periodontal ligament) in a susceptible host. In order to successfully manage periodontitis, dental professionals must understand the pathogenesis, primary aetiology, risk factors, contributing factors and treatment protocols. Careful diagnosis, elimination of the causes and reduction of modifiable risk factors are paramount for successful prevention and treatment of periodontitis. Initial non-surgical periodontal therapy primarily consists of home care review and scaling and root planing. For residual sites with active periodontitis at periodontal re-evaluation, a contemporary regenerative or traditional resective surgical therapy can be utilised. Thereafter, periodontal maintenance therapy at a regular interval and long-term follow-ups are also crucial to the success of the treatment and long-term retention of teeth. The aim of this review is to provide current concepts of diagnosis, prevention and treatment of periodontitis. Both clinical and biological rationales will be discussed.

A novel insertion design of fiber materials for the adhesive reattachment in vertically fractured teeth

Objective

This ex vivo study aimed to evaluate the strengthening effect of different ferrule and reattachment designs with fiber and adhesive materials on vertically fractured teeth.

Methods

Ninety extracted single-root premolars were instrumented and divided into nine groups (two control groups and seven experimental groups; n = 10). The negative control (NC) group comprised of intact teeth, while the positive control (PC) group comprised of root canal-treated teeth. The roots of the teeth in the experimental groups were vertically fractured into two equal fragments. The fragments were reattached with one of the followings: 4-methacryloxyethyl trimellitate anhydride/methacrylate-tri-n-butyl borane (4-META/MMA-TBB) resin, 4-META/MMA-TBB + quartz fiber post, 4-META/MMA-TBB + glass fiber bundles, 4-META/MMA-TBB + quartz fiber post + 1 mm ferrule, 4-META/MMA-TBB + glass fiber bundles + 1 mm ferrule, 4-META/MMA-TBB + quartz fiber post + 2 mm ferrule, and 4-META/MMA-TBB + glass fiber bundles + 2 mm ferrule. The core build-ups were made with composite resin. The specimens were subjected to compressive loading until failure occurred. Mean load necessary to fracture each sample and the fracture types of these samples were recorded.

Results

The highest mean fracture load was recorded in the NC group (1,036.7 N), which was not significantly higher than the PC group (989.66 N) (p > 0.05). The roots reattached with quartz fiber post demonstrated significantly less fracture strength (871.9 N) as compared to the other test and control groups (p < 0.05). There was no significant difference between the PC group and reattached fragments with different ferrule designs in terms of fracture resistance (p > 0.05).

Conclusions

The customized fiber bundles may be more suitable for reattachment of vertically fractured teeth than the rigid fiber posts. For reattachment procedures, the ferrule design may be preferred to increase the fracture strength of vertically fractured teeth.

Orthodontic Extrusion vs. Surgical Extrusion to Rehabilitate Severely Damaged Teeth: A Literature Review

The need to rehabilitate severely compromised teeth is frequent in daily clinical practice. Tooth extraction and replacement with dental implant represents a common treatment choice. However, the survival rate for implants is inferior to teeth, even if severely damaged but properly treated. In order to reestablish a physiological supracrestal tissue attachment of damaged teeth and to arrange an efficient ferrule effect, three options can be considered: crown lengthening, orthodontic extrusion and surgical extrusion. Crown lengthening is considered an invasive technique that causes the removal of part of the bony support, while both orthodontic and surgical extrusion can avoid this inconvenience and can be used successfully in the treatment of severely damaged teeth. The aim of the present narrative review is to compare advantages, disadvantages, time of therapy required, contraindications and complications of both techniques.

Interdisciplinary treatment of a patient with amelogenesis imperfecta: Case report with a 35-year follow-up

OBJECTIVE

This case will illustrate the interdisciplinary management of an adolescent female patient with amelogenesis imperfecta (AI). It will contrast this approach and compare it to the previous "multidisciplinary" treatment rendered before the patient was referred for a second opinion.

CLINICAL CONSIDERATIONS

The patient had a family history of AI affecting all of her permanent teeth. There were many impacted teeth. The majority of her family and relatives afflicted by this opted for dentures. The patient had undergone 2 years of treatment and was told that her "braces would be removed next week." Her new dentist was concerned because the case was not ready to restore.

CONCLUSION

He recommended referral to another orthodontist for a second opinion and formulation of an interdisciplinary treatment plan that would include a periodontist, endodontist, and restorative dentist. The patient's family accepted the second opinion referral and restarted treatment with an interdisciplinary team. The restorative dentist was the quarterback for this integrated and sequenced approach. The case was ultimately restored. A 35 year follow-up shows stability with a caries free, periodontally healthy, esthetic result.