The confidence of undergraduate dental students when carrying out prosthodontic treatment and their perception of the quality of prosthodontic education

Should our older, edentulous patients live with their teeth sitting in a glass of water?

Over 20 years ago, the McGill consensus statement stated that a mandibular two-implant overdenture should be the first choice of care for our edentulous patients. We have around three million edentulous patients in England and Wales currently, many over the age of 60, and many of whom are not able to wear a satisfactory set of complete dentures, let alone able to eat a normal diet. In 2009, the York consensus statement produced by the British Society of Prosthodontics concluded that "a substantial body of evidence is now available demonstrating that patients' satisfaction and quality of life with implant-supported overdentures in the mandible is significantly greater than conventional dentures". So, why has the NHS ignored these important scientific papers and left our older population in a state of dental neglect? This discussion paper will consider some of the facts and suggest that there may, potentially, be some solutions.

Enhancing dental education: integrating online learning in complete denture rehabilitation

This study investigated the integration of online learning into complete denture rehabilitation (CDR) training for dental interns, highlighting its impact on their education and readiness for clinical practice. Given that CDR poses significant challenges due to its technical complexity and profound influence on patient well-being, online learning has emerged as a strategic educational tool to enhance interns' knowledge and skills. This research included the administration of a comprehensive questionnaire to 63 dental interns to assess their backgrounds, experiences with online learning, and attitudes toward its application in CDR education. The results revealed strong engagement with online learning, with a majority valuing its flexibility, accessibility, and capacity to facilitate self-paced, individualized learning. Despite the enthusiasm for online modalities, the results identified notable gaps in interns' confidence in and preparedness for performing CDR, highlighting the need for targeted improvements in online curriculum development. By emphasizing the essential role of innovative teaching methods, including virtual reality (VR), this study underscores the need for a balanced educational approach that combines traditional and digital platforms. This strategy aims to prepare future dental professionals for the complexities of modern clinical environments, ensuring that they are well equipped to meet the diverse needs of the edentulous population.

Digital evaluation of occlusal reduction of metal crown preparations in students in the COVID-19 era: A cross-sectional study

Introduction

Occlusion of extra-coronal restorations depends on the reduction achieved during crown preparation. Ensuring adequate reduction is therefore essential for the success of the final restoration. The objective of this study was to digitally quantify the occlusal reduction performed by preclinical undergraduate dental students and to compare their performance across the year and using a hybrid teaching approach developed because of the COVID-19 pandemic.

Methods

Eighty full metal crown preparations on typodonts were scanned using the KaVo Arctica 3D Optical scanner. Occlusal reduction was measured using Autodesk Fusion 360 v2.0 by superimposing an unprepared tooth over the preparation and taking measurements at six occlusal points (mesio-buccal (MB), disto-buccal (DB), mesio-lingual (ML), disto-lingual (DL), mesial fossa (MF), and distal fossa (DF)). A general linear model was used to compare student performance in the mid vs final year exams and in 2018/19 vs 2020/2021.

Results

The adequacy of occlusal reduction was variable. Occlusal reductions of the MF (p = 0.014) and DF (p = 0.011) were significantly lower in the final exam than the mid-year exam in 2018/2019. There was also occlusal under-reduction at all six occlusal points in 2020/2021 compared with 2018/2019.

Conclusions

Students must be encouraged to use verification guides throughout the procedure to ensure adequate reductions. These verification methods can be as simple as putty indices or as advanced as optical scanners. The use of verification methods alongside a hybrid virtual and live teaching approach may guarantee the best results.

Dental Students' Perception and Self-Perceived Confidence Level in Key Dental Procedures for General Practice and the Impact of Competency Implementation on Their Confidence Level, Part I (Prosthodontics and Conservative Dentistry)

Background

Evaluating the level of dental students' competence is crucial for validating their preparedness for graduation. Confidence has a significant role in achieving competence. There are limited studies that assess the level of self-perceived confidence among final-year dental students regarding their ability to conduct key dental procedures. This study aims to assess the self-perceived confidence level of final-year dental students in performing essential dental procedures across various dental disciplines and to assess the effect of implementing competencies in the curriculum on the self-perceived confidence level of students by comparing two cohorts of final-year students in two different years 2016 (Traditional Cohort) and 2019 (Competencies Cohort).

Materials and Methods

An questionnaire was answered by two cohorts of final-year dental students: one group in 2016 before the implementation of the competency-based assessment system (group 1, n = 153), and the other in 2019 after the implementation of this system (group 2, n = 199), the same questionnaire was used for both cohorts. The results from the two groups were compared regarding the degree of self-perceived confidence in conducting key dental procedures. The data were analysed using SPSS statistics and Levene's Test for Equality of Variances and t-test for Equality of Means calculated.

Results

Group 1 showed a significantly higher means of self-perceived confidence levels than group 2 in the ability to conduct seven out of the 20 prosthodontics procedures studied: providing patients with Cobalt-Chromium (Co-Cr) removable partial dentures (RPD) (3.77 vs. 3.56), providing the patient with Acrylic RPD (3.70 vs. 3.23), treatment planning for partially edentulous patients (3.83 vs. 3.34), giving OHIs for denture patients (4.17 vs. 3.95), dealing with CD postinsertion complaints (3.97 vs. 3.76), giving postinsertion instructions for removable prostheses cases (4.12 vs. 3.82), and providing patients with immediate dentures (2.67 vs. 2.32). The same applies to 6 out of 16 conservative dentistry procedures: placing anterior composite (4.41 vs. 4.12), placing posterior composite (4.43 vs. 3.88), placing posterior amalgam (4.29 vs. 4.02), placing matrix band for Class II restorations (4.24 vs. 3.71), placing a prefabricated post (3.34 vs. 2.88), and placing fiber post (3.45 vs. 3.34). On the other hand, group 2 shows higher means of self-perceived confidence than group 1 in only two conservative dentistry procedures: onlay restorations (2.18 vs. 2.76) and inlay restorations (2.22 vs. 2.75). No significant differences in means of self-perceived confidence were found between the two groups in the remaining 21 procedures studied.

Conclusions

This study has shown that final-year dental students have high self-perceived confidence levels in doing simple dental procedures yet less confidence in more complex ones. Although, students' self-perceived confidence decreases after the introduction of a competency-based assessment system. Competency implementation and execution criteria may differ between schools which may have an impact on final outcomes. Hence, there is a need for regular evaluation of competencies being assessed to maintain a curriculum that is up to date.

Comparison of Malaysia's Bachelor of Dental Technology curriculum with three other countries: Proposing a basic curriculum framework

INTRODUCTION

A dental technologist is one of the most essential allied dental health professionals and the dental technology curriculum should be comprehensively reviewed on a regular basis. This study aims to compare the only existing Bachelor of Dental Technology (BDT) curriculum in Malaysia with BDT programmes offered by other well-established universities, and map out the similarities and differences, as well as to explore future recommendations and propose a new curriculum framework.

MATERIALS AND METHODS

A descriptive analysis was carried out using Laurie Brady's four-stage strategy. First, available curriculum materials were collected from four different institutions' electronic webpage: AIMST (Malaysia), GU (Australia), UO (New Zealand) and CMU (United Kingdom), and then compared based on three key domains: curriculum contents, teaching and learning strategies and assessments. Following that, the similarities and differences between various curricula were identified. Future recommendations and a curriculum framework were then proposed.

RESULTS

The core BDT curriculum content is concurred upon by all four universities, with an emphasis on basic sciences, laboratory materials, practical sessions and research projects. However, the credit weightage for each course or module varied across the four institutions, with some offering unique subjects and implementing different teaching methods and assessments. A simple BDT curriculum framework with a proposed syllabus was designed based on the three key domains and future recommendations for curriculum improvement were explored.

CONCLUSION

The present study identified several areas for Malaysian BDT curriculum development and improvement. The proposed framework can be a guide for Malaysian dental schools in designing a comprehensive dental technology programme.

Comparison of case-based learning combined with Rain Classroom teaching and traditional method in complete denture course for undergraduate interns

BACKGROUND

Complete denture, as an important restoration method for edentulism, is difficult to study for beginners, especially in linking the theory with clinical practice.

OBJECTIVE

This study was aimed to compare the teaching effects between case-based learning combined with Rain Classroom teaching and traditional lecture method in the clinical course of complete denture prosthesis for undergraduate interns.

METHODS

In a course called "Problems and treatment strategies of complete denture after wearing", interns were divided into two groups: one for traditional lecture-based teaching with PowerPoint slideshow (the control group, n = 28); and the other for case-based learning combined with Rain Classroom teaching, which published information before class, discussed specific clinic cases in class and got real-time interns' feedback via WeChat (the test group, n = 22). Both groups received the same exam and questionnaire survey after class. The Q&A participation of interns in class, theoretical test scores and questionnaire survey responses were used to evaluate the teaching effects. An independent sample t-test and the chi-square test or Fisher's exact test were used for statistical analysis in this study.

RESULTS

The Q&A participation of interns in the test group was much better than that of the control group. The average score on the theoretical test after class in the test group (72.14 ± 12.24) was significantly higher than that in the control group (61.29 ± 20.12) (P < 0.05). In the test group, 94.54% (21/22) of the interns preferred the new teaching mode.

CONCLUSION

Case-based learning combined with Rain Classroom teaching is helpful to enliven the classroom atmosphere, inspire studying enthusiasm, and achieve a good learning effect in both theory and clinical practice related to complete denture prosthesis.

Self-confidence as a predictor of senior dental student academic success

PURPOSE

Noncognitive indicators, such as personality type and self-confidence, have been used as predictors of achievement. Accordingly, we investigated whether self-confidence in clinical skills predicts academic success among predoctoral senior dental students.

METHODS

Two consecutive cohorts (N = 336) of predoctoral senior dental students were invited to rate their self-confidence in clinical procedures twice: at the beginning and at the end of the academic year. Academic performance in clinical assessments was retrieved from scholastic records. Multiple linear regression models were constructed to predict clinical assessment grades using self-confidence scores as a predictor after controlling for possible confounders.

RESULTS

Self-confidence scores in clinical procedures were positively correlated with clinical and academic performance. Self-confidence in clinical procedures and grade point averages were consistent predictors of student performance. Additionally, self-confidence had improved at the end of the senior year (p = 0.003).

CONCLUSIONS

Self-confidence in clinical procedures was a predictor of future clinical success. Therefore, fostering and nurturing the confidence of students and integrating self-confidence assessment into the curricula at relevant timepoints should be a goal in dental education. Moreover, self-assessment of confidence in clinical skills could be used to guide students and graduates in developing their own personal development plan.

Dental students' experience and perceived confidence level in different restorative procedures

PURPOSE

Graduating confident students who are able to flourish and develop in their future careers is an importance outcome of the dental education. This study aims to evaluate self-perceived level of confidence of fifth-year dental students in different restorative-related tasks and the relationship between their clinical training and its corresponding confidence.

METHODS

Fifth-year graduate dental students (n = 202) were asked to fill a questionnaire that rated their level of confidence in different clinical restorative dentistry tasks. Additionally, they were asked about the number of times they performed tasks prior to attempting the equivalent competency and in which sub-specialty they felt the most confident.

RESULTS

Completed responses were received from 120 students giving a response rate of 59%. Students felt the most prepared and confident in direct restorations and simple endodontic treatment, and they seemed less confident in indirect restorations and complex endodontic treatment. Regarding the steps of indirect restorations, students expressed least confidence in crown preparation compared to impression making and try-in procedures (P < .05). Students rated their confidence highest in operative dentistry, followed by endodontics and lastly fixed prosthodontics.

CONCLUSION

The results highlight the areas in which students exhibit the least confidence. Enhancement of student clinical skills and directed exposure is necessary to raise the level of perceived confidence which will reflect positively on their current and future professional performance.

Preparing dental students for independent practice: a scoping review of methods and trends in undergraduate clinical skills teaching in the UK and Ireland

Introduction The governing bodies for dentistry in the UK and Ireland require dentists, at graduation, to possess the knowledge, skills and attributes which enable them to practise safely, without supervision. The means by which dental schools achieve this may differ and may undergo modification in response to changes in the expectations of governing bodies and challenges within the teaching environment. It is therefore important to identify which of these approaches works well and to disseminate good practice described in the literature.Objectives To use a scoping review to identify from the published literature the methods used to teach clinical dental skills, including innovations, motivations for changes, and factors affecting the delivery and quality of teaching.Method Scoping review methodology was used to select and analyse 57 articles published between 2008 and 2018.Results Innovations in didactic teaching were facilitated by advances in IT and development of virtual learning environments, which promoted independent, self-directed learning. Pre-clinical practical teaching took place in clinical techniques laboratories utilising mannequin heads, with a minority of dental schools using virtual reality simulators in addition. Clinical experience was gained mainly in multi-disciplinary clinics and offsite outreach teaching centres. Insufficient numbers of suitable patients, increasing student numbers and a fall in teaching staff contributed to a reported reduction in clinical experience of certain treatments.Conclusions Contemporary clinical dental skills teaching produces new graduates who possess excellent theoretical knowledge, are prepared and confident in basic clinical skills, but are lacking in experience of complex treatments which may result in a reduced preparedness for independent practice.

Students' self-confidence and perceived quality of prosthodontics education: A study in the Faculty of Dental Medicine of the University of Porto

INTRODUCTION

Oral rehabilitation with removable dentures (RDs) is still a viable choice for the edentulous population. Fostering students' confidence in prosthodontic procedures should be a major concern in dental schools. This study has three purposes: (a) to measure the self-reported confidence levels of undergraduate dental students when performing removable prosthodontic treatments; (b) to evaluate the students' perceived quality of removable prosthodontics education; and (c) to assess the students' suggestions to improve removable prosthodontics education.

MATERIALS AND METHODS

An anonymous questionnaire was delivered to third-, fourth- and fifth-year students of the Faculty of Dental Medicine of the University of Porto (FMDUP) (n = 176). Data from quantitative questions were statistically analysed with IBM SPSS Statistics for Windows (V.24.0), whilst qualitative data were clustered into topics and analysed in Excel.

RESULTS

With a 100% response rate, most students felt "confident" and "very confident" in RD clinical procedures. Overall, the 5th-year students had higher confidence than 4th-year ones, except when surveying diagnostic casts. Our findings also revealed that students considered the removable prosthodontics education "Good" and "Very good," and their main suggestions were related to increasing the time allocated to clinical practice.

CONCLUSIONS

Students' confidence in carrying out removable prosthodontic procedures grew as they progressed through the course. Overall, the students' evaluation of the quality of prosthodontics education was positive, and their main suggestion to improve their confidence levels was increasing the clinical experience.

Development of a Checklist to Prevent Reconstructive Errors Made By Undergraduate Dental Students

PURPOSE

To design a checklist in order to reduce the frequency of reconstructive preventable errors (PE) performed by undergraduate dental students at McGill University.

MATERIALS AND METHODS

The most common PE occurring at a university dental clinic were identified by three reviewers analyzing the refunded cases, and used to create a preliminary checklist. This checklist was then validated by a panel of dental educators to produce a finalized 20-item checklist. The 20-question checklist was then submitted to students in a cross-sectional survey-based study to evaluate its relevance to undergraduate clinical education needs.

RESULTS

As many as 81% of students reported to have forgotten at least one item of the checklist during care of their last patient, and the most forgotten checklist items corresponded to the pretreatment stage. The students also reported that 17 of the 20 items in the checklist were relevant to a considerable extent or highly relevant.

CONCLUSION

Common PE identified in the undergraduate clinic could be used to create a checklist of relevant items designed to reduce errors made by students and practitioners performing prosthodontic and reconstructive treatments. However, further studies are required to evaluate the implementation and efficiency of the checklist.

Changing trends of prosthetic rehabilitation of partially edentulous patients visiting a tertiary care dental hospital

Introduction:

The choice of prosthetic replacement is largely determined by the patient's choice and economic status, available technology and expertise, as well as the number of missing teeth. The aim of this study was to identify the trend in prosthetic replacement, in partially edentulous patients treated at Riyadh Elm University (REU) hospitals, as well as to investigate the factors that might influence the prosthetic choice.

Methods:

The records from Dentoplus digital system of all partially edentulous patients who had a prosthetic replacement at REU 2013, until June 2018, were screened and analyzed using Statistical software SPSS version 25. Chi-square and Fisher exact tests were performed. Alpha level was set at ≤0.05.

Results:

6,340 patients received implants, removable or fixed prosthesis. Majority of the patients were females (60%). RPDs were the highest placed restorations (69%). Students (73%) placed most RPDs. Implants significantly increased through the years by almost (30%) (P-value = 0.00). Among FPDs, metal-ceramics were the highest restorations (74%), with a significant increase of all-ceramic restorations through years (P-value = 0.00). Moreover, FPDs were significantly the highest restorations among young-adult and middle-aged patients (P-value = 0.00).

Conclusion:

There was a clear change in prosthetic rehabilitation trends over the past few years. Although removable partial dentures continued to play a major role in prosthetic teeth replacement, the use of dental implants showed a steady increase every year. Students’ requirements and level of experience, along with the patient age, had an influence in the prosthetic choice.