Ultra‐morphological characteristics of dentin surfaces after different preparations and treatments

Role of the smear layer in adhesive dentistry and the clinical applications to improve bonding performance

Currently, dental adhesives can be divided into two systems; a smear layer-removal approach with etch-and-rinse adhesives or a smear layer-modified approach with self-etching adhesives. After phosphoric acid etching, the smear layer is completely removed. More attention is, however, required when using self-etching adhesives. The smear layer is partially demineralized by the weak acidic monomer and subsequently incorporated into the hybrid layer. Therefore, the characteristics of the smear layer play an important role on the bonding performance of self-etching adhesives. Such characteristics, for instance, smear layer thickness and smear layer density, are influenced by many factors, e.g., instruments used for dentin surface preparation, cutting speed, and the abrasive particle size of the cutting instruments. This review discusses the contributing factors that affect the smear layer characteristics, and the influence of the smear layer on the bonding performance of dental adhesives. Also, the application techniques regarding how to improve the bonding performance of self-etching adhesives – the smear layer removal by using chemical agents, or the modification of the adhesive application procedures – are provided.

Applications of scanning electron microscopy and focused ion beam milling in dental research

The abilities of scanning electron microscopy (SEM) and focused ion beam (FIB) milling for obtaining high-resolution images from top surfaces, cross-sectional surfaces, and even in three dimensions, are becoming increasingly important for imaging and analyzing tooth structures such as enamel and dentin. FIB was originally developed for material research in the semiconductor industry. However, use of SEM/FIB has been growing recently in dental research due to the versatility of dual platform instruments that can be used as a milling device to obtain low-artifact cross-sections of samples combined with high-resolution images. The advent of the SEM/FIB system and accessories may offer access to previously inaccessible length scales for characterizing tooth structures for dental research, opening exciting opportunities to address many central questions in dental research. New discoveries and fundamental breakthroughs in understanding are likely to follow. This review covers the applications, key findings, and future direction of SEM/FIB in dental research in morphology imaging, specimen preparation for transmission electron microscopy (TEM) analysis, and three-dimensional volume imaging using SEM/FIB tomography.

Physicochemical Properties of Dentine Subjected to Microabrasive Blasting and Its Influence on Bonding to Self-Adhesive Prosthetic Cement in Shear Bond Strength Test: An In Vitro Study

The aim of this in vitro study was to assess the influence of microabrasive blasting on the physicochemical properties of dentine and shear bond strength (SBS) of self-adhesive resin cement (Maxcem Elite, Kerr, Orange, CA, USA) bonded to the dentine surface. Ninety cylindrical specimens with exposed dentine of human teeth were prepared and divided into three randomized, parallel sample sets A, B, and C. Groups B and C were subjected to abrasive blasting using a micro-sandblasting device (Microetcher IIa, Danville Materials, Carlsbad, CA, USA) with two gradations of Al₂O₃ abrasives (Group B, abrasion with a gradation of 50 μm; group C, abrasion with a gradation of 27 μm). SEM imaging, profilometry, chemical composition analysis, contact angle measurements, surface free energy, and SBS tests were performed. The resulting data were statistically analyzed using the Statistica software (ver. 13.3, Tibco Software Inc., Palo Alto, CA, USA). Microabrasive blasting caused changes in surface topography, structural features, and the connection strength between the dentin surface and self-adhesive prosthetic cement. Air microabrasion through the multifactorial positive reorganization of the treated surface of dentine is recommended as a pretreatment method in fixed prosthodontics adhesive cementation protocols.

Effects of dentin surface preparations on bonding of self-etching adhesives under simulated pulpal pressure

Objectives

This study evaluated the effects of different smear layer preparations on the dentin permeability and microtensile bond strength (µTBS) of 2 self-etching adhesives (Clearfil SE Bond [CSE] and Clearfil Tri-S Bond Universal [CTS]) under dynamic pulpal pressure.

Materials and Methods

Human third molars were cut into crown segments. The dentin surfaces were prepared using 4 armamentaria: 600-grit SiC paper, coarse diamond burs, superfine diamond burs, and carbide burs. The pulp chamber of each crown segment was connected to a dynamic intra-pulpal pressure simulation apparatus, and the permeability test was done under a pressure of 15 cmH₂O. The relative permeability (%P) was evaluated on the smear layer-covered and bonded dentin surfaces. The teeth were bonded to either of the adhesives under pulpal pressure simulation, and cut into sticks after 24 hours water storage for the µTBS test. The resin-dentin interface and nanoleakage observations were performed using a scanning electron microscope. Statistical comparisons were done using analysis of variance and post hoc tests.

Results

Only the method of surface preparation had a significant effect on permeability (p < 0.05). The smear layers created by the carbide and superfine diamond burs yielded the lowest permeability. CSE demonstrated a higher µTBS, with these values in the superfine diamond and carbide bur groups being the highest. Microscopic evaluation of the resin-dentin interface revealed nanoleakage in the coarse diamond bur and SiC paper groups for both adhesives.

Conclusions

Superfine diamond and carbide burs can be recommended for dentin preparation with the use of 2-step CSE.

Chemical interaction between 10-methacryloyloxydecyl dihydrogen phosphate and methacryloxypropyltrimethoxysilane in one-bottle dental primer and its effect on dentine bonding

In the present study, we investigated the chemical interaction between 10-methacryloyloxydecyl dihydrogen phosphate (10-MDP) and methacryloxypropyltrimethoxysilane (gamma-MPS) in one-bottle primer solutions and its effect on dentine bonding performance. Solutions containing 10 wt% 10-MDP and/or gamma-MPS at 0, 1, 5, 10, or 15 wt% were prepared, providing 10 experimental groups (labeled MDP/MPSxx or MPSxx, where MDP indicates the presence of 10 wt% MDP and xx is the wt% of gamma-MPS in the solution). Phosphoric-acid-etched dentine blocks were prepared from human molars and conditioned in the solutions before being used to build resin-dentine-bonded specimens, which were subsequently subjected to microtensile bond strength (μTBS) testing after 24-h or six-months water storage. Interfacial nanoleakage was evaluated by SEM observation. All the primer-conditioned samples showed significantly higher initial μTBS values than that of the control group, and six-months water storage significantly lowered the μTBS for all the groups; however, the decreases for MDP/MPS10 and MDP/MPS15 were significantly greater than those for MDP/MPS1 and the control solution. Furthermore, MDP/MPS10 and MDP/MPS15 groups also showed more serious nanoleakage. Fourier-transform infrared spectroscopy, X-ray photoelectron spectroscopy, and X-ray diffraction analyses were used to investigate the chemical affinity between 10-MDP and hydroxyapatite (HAp). In XRD analysis, the intensities of peaks assigned to 10-MDP-calcium salts were lower for the solutions containing gamma-MPS. Overall, the results indicate that the copresence of gamma-MPS (above 10 wt%) and 10-MDP in one-bottle primer solutions inhibit the formation of 10-MDP-calcium salts, leading to increased long-term nanoleakage and decreased bonding durability.

Effects of a surface prereacted glass-ionomer filler coating material on biofilm formation and inhibition of dentin demineralization

OBJECTIVES

This study investigated the ability of a surface prereacted glass-ionomer (S-PRG) coating material to inhibit the biofilm formation and demineralization of dentin.

METHODS AND MATERIALS

Dentin specimens were randomly divided into three groups: (1) no coating (control), (2) S-PRG filler-containing coat, and (3) a nonS-PRG filler-containing coat. Streptococcus mutans biofilms were grown on the dentin surfaces in a microcosm for 20 h. Then, the quantity of bacteria and water-insoluble glucan in the retained biofilm on the dentin surface were measured. Regarding demineralization inhibition test, specimens were demineralized for 5 days then sectioned into halves and observed under confocal laser scanning microscope (CLSM). One-way ANOVA and Tukey's HSD were used for statistical analysis.

RESULTS

The estimated mean surface roughness for specimens in the S-PRG group was statistically significantly higher than the estimates for both the nonS-PRG and the control group specimens. The quantity of bacteria and water-insoluble glucan/mm² revealed that the S-PRG group prevented biofilm formation and bacterial adhesion to the dentin surface compared with the control and nonS-PRG groups. The S-PRG group recorded the highest acid-resistance ability with no surface loss.

CONCLUSION

Application of S-PRG barrier coat on dentin surfaces can inhibit biofilm formation as well as protecting the dentin surface against demineralization.

CLINICAL SIGNIFICANCE

Coating material containing S-PRG fillers might be used for caries prevention, through inhibiting biofilm formation, enhancing mineralization, and reducing acidic attack by cariogenic bacteria.