Methodology for assessing the performance of urine absorbing aids in controlling malodour release

A Laboratory Method for Determining Bacterially Formed Odorants and Reducing Odor in Absorbent Incontinence Products

PURPOSE

The purpose of this study was to design a laboratory test method to mimic the formation of bacterially formed odorants during the use of absorbent urinary incontinence products. Three odor inhibitors with different modes of action were tested and evaluated.

METHODS

Bacterially formed odorants in incontinence products were evaluated by adding a synthetic urine inoculated with a mixture of 4 bacterial strains to product samples cut from the incontinence products. The product samples were incubated in sealed flasks. The odorants that formed in the head space were sampled onto adsorbent tubes and analyzed by gas chromatography. The inhibitory effects of low pH, ethylenediaminetetraacetic acid (EDTA), and activated carbon were then measured.

RESULTS

This technique enabled production of known odorants 3-methylbutanal, guaiacol, diacetyl, and dimethyl disulfide (DMDS) in concentrations of 50 to 600 ng/L in incontinence products. The method was further evaluated by testing 3 types of odor inhibitors; EDTA significantly reduced formation of all 4 odorants (P < .001). Lowering the pH from 6.0 to 4.9 decreased levels of 3-methylbutanal, DMDS, and guaiacol (P < .001); however, diacetyl levels increased (P < .001). Activated carbon significantly reduced the formation of diacetyl, DMDS, guaiacol, and 3-methylbutanal (P < .001).

CONCLUSIONS

The technique we developed can be used to evaluate inhibitors with different modes of action to determine odor control in incontinence products. The odorants formed are produced by bacteria and have been identified as key contributors to the odor of used incontinence products. This work can be a step toward establishing a standard in the field of incontinence and odor control; creation of a standard will help the health care sector compare products to be purchased and benefit patients through the development of better products.

Olfactory Characterization of Typical Odorous Pollutants Part I: Relationship Between the Hedonic Tone and Odor Concentration

The hedonic tone is a suitable evaluation index which can truly reflect the psychological impact of an odor. To find out the relationship between the odor concentration (OC) and hedonic tone (H), dimethyl disulfide, limonene and butyl acetate were presented as typical odorants with different characters. A panel of 16 persons was engaged to rate the hedonic tone of a series sample with various concentrations according to the nine-point scale. The relationship between the hedonic tone and OC was established based on a multivariate logistic regression analysis. The research results demonstrated that the smell of dimethyl disulfide is unpleasant at various concentration levels, and its perceived unpleasantness is increased with OC, and at the critical point (H = −0.5), the odor index of dimethyl disulfide is 0.5 (OC = 3 OUE·m−3). For limonene, its smell is pleasant when the odor index is between 1.4 and 3.3 (OC = 25~1995 OUE·m−3). For butyl acetate, the average results showed an unpleasant character with the corresponding odor index of 1.87 (OC = 74 OUE·m−3). Each odorant has a unique hedonic behavior curve from which the annoyance potential of different odorants can be clearly discriminated, with the order of dimethyl disulfide > butyl acetate > limonene. The regression equations showed a quadratic nonlinear function between the hedonic tone and OC.

Characterization and prediction of odours from municipal sewage treatment plant

One of the causes of public discomfort and complaint about odour in China is the nuisance odour, generated from the municipal sewage treatment plants. With the ability to be dispersed over a long distance, the odours can affect a large number of people. With the aim of identifying the compounds contributing the most to the overall odour emanating from municipal sewage treatment plant, and developing a prediction model for sensory odour concentration based on the compound odour activity value (OAV), odour samples from 2 days were collected at a municipal sewage treatment plant in Tianjin in the months of October and November 2013. Odour concentrations (OCs) were measured by the triangular odour bag method. Chemical components were quantified by gas chromatography-mass spectrometry. According to the analysis of odour emission characteristics, it was found that hydrogen sulfide and methyl mercaptan were the key odorants responsible for the overall odour. To understand the interrelationship of these two odorants, 10 groups of a binary mixture of hydrogen sulfide and methyl mercaptan, representing different levels of odour concentration and intensity, were prepared in the laboratory. OCs were regressed against OAV using multivariate linear regression. A statistically significant positive correlation was found between single-compound OAV and odour concentration (by both SPSS and Minitab software). Furthermore, the models were validated by field monitoring data, which showed the odour prediction concentration had a good fit to the measured concentration by using Minitab software. Lastly, the Austal 2000 model system was used for the simulation of the odour emission dispersion into the surrounding area. This study provides an effective way to predict the odour emission condition in municipal sewage treatment plant.

Method for Bacterial Growth and Ammonia Production and Effect of Inhibitory Substances in Disposable Absorbent Hygiene Products

PURPOSE

The purpose of this study was to evaluate a pragmatic laboratory method to provide a technique for developing incontinence products better able to reduce malodor when used in the clinical setting.

METHODS

Bacterial growth and bacterially formed ammonia in disposable absorbent incontinence products was measured by adding synthetic urine inoculated with bacteria to test samples cut from the crotch area of the product. The inhibitory effect's of low pH (4.5 and 4.9) and 3 antimicrobial substances-chlorhexidine, polyhexamethylene biguanide (PHMB), and thymol-at 2 concentrations each, were studied.

RESULTS

From the initial inocula of 3.3 log colony-forming units per milliliter (cfu/mL) at baseline, the bacterial growth of the references increased to 5.0 to 6.0 log cfu/mL at 6 hours for Escherichia coli, Proteus mirabilis, and Enterococcus faecalis. At 12 hours there was a further increase to 7.0 to 8.9 log cfu/mL. Adjusting the pH of the superabsorbent in the incontinence product from 6.0 to pH 4.5 and pH 4.9 significantly (P < .05) inhibited the bacterial growth rates, in most cases, both at 6 and 12 hours. The effect was most pronounced at pH 4.5. Chlorhexidine had significant (P < .05) inhibitory effect on E. coli and E. faecalis, and at 12 hours also on P. mirabilis. For PHMB and thymol the results varied. At 6 hours, the ammonia concentration in the references (pH 6.0) was 200 to 300 ppm and it was 1500 to 1600 ppm at 8 hours. At pH 4.5, no or little ammonia production was measured at 6 and 8 hours. At pH 4.9, there was a significant reduction (P < .01). Chlorhexidine and PHMB exerted a significant (P < .01 or P < .001) inhibitory effect on ammonia production at both concentrations and at 6 and 8 hours. Thymol 0.003% and 0.03% showed inhibitory effect at both 6 hours (P < .01 or P < .001) and at 8 hours (P < .05 or P < .001).

CONCLUSION

The method described in this study can be used to compare the ability of various disposable absorbent products to inhibit bacterial growth and ammonia production. This technique, we describe, provides a pragmatic method for assessing the odor-inhibiting capacity of specific incontinence products.

Application and Uses of Electronic Noses for Clinical Diagnosis on Urine Samples: A Review

The electronic nose is able to provide useful information through the analysis of the volatile organic compounds in body fluids, such as exhaled breath, urine and blood. This paper focuses on the review of electronic nose studies and applications in the specific field of medical diagnostics based on the analysis of the gaseous headspace of human urine, in order to provide a broad overview of the state of the art and thus enhance future developments in this field. The research in this field is rather recent and still in progress, and there are several aspects that need to be investigated more into depth, not only to develop and improve specific electronic noses for different diseases, but also with the aim to discover and analyse the connections between specific diseases and the body fluids odour. Further research is needed to improve the results obtained up to now; the development of new sensors and data processing methods should lead to greater diagnostic accuracy thus making the electronic nose an effective tool for early detection of different kinds of diseases, ranging from infections to tumours or exposure to toxic agents.

Major odorants released as urinary volatiles by urinary incontinent patients

In this study, volatile urinary components were collected using three different types of samples from patients suffering from urinary incontinence (UI): (1) urine (A); (2) urine + non-used pad (B); and (3) urine + used pad (C). In addition, urine + non-used pad (D) samples from non-patients were also collected as a reference. The collection of urinary volatiles was conducted with the aid of a glass impinger-based mini-chamber method. Each of the four sample types (A through D) was placed in a glass impinger and incubated for 4 hours at 37 °C. Ultra pure air was then passed through the chamber, and volatile urine gas components were collected into Tedlar bags at the other end. These bag samples were then analyzed for a wide range of VOCs and major offensive odorants (e.g., reduced sulfur compounds (RSCs), carbonyls, trimethylamine (TMA), ammonia, etc.). Among the various odorants, sulfur compounds (methanethiol and hydrogen sulfide) and aldehydes (acetaldehyde, butylaldehyde, and isovaleraldehyde) were detected above odor threshold and predicted to contribute most effectively to odor intensity of urine incontinence.