Influence of apical preparation size and irrigation technique on root canal debridement: a histological analysis of round and oval root canals

The effect of ultrasonic and multisonic irrigation on root canal microbial communities: An ex vivo study

AIM

To analyse the effect of ultrasonic irrigant activation (UIA) and the GentleWave (GW) multisonic irrigation (GW) with minimal instrumentation on the root canal microbial diversity in an ex vivo model that used extracted molars with a history of pulp necrosis.

METHODOLOGY

Twenty-three mandibular molars were prepared ex vivo for collection of superficial (surface control), pre-treatment and post-treatment samples 24 h after extraction. Samples were divided into two groups: UIA using 6% NaOCl (n = 11) and GW group (n = 12). All samples were processed using quantitative real-time polymerase chain reaction (qPCR) and 16S rRNA next-generation sequencing to measure microbial diversity before and after the antimicrobial treatment. For qPCR, a t-test (α = .05) was used to compare the log10 reduction. The Chao1 and Shannon indices evaluated alpha diversity. Differences in community composition (beta diversity) were evaluated by analysis of similarity (ANOSIM). Kruskal-Wallis test with Bonferroni corrections was performed to evaluate the differences in abundances genera in the samples.

RESULTS

Quantitative real-time polymerase chain reaction revealed an estimated 1.6 and 2.6 log10 reduction for UIA and GW groups respectively (p = .048). An average of 5 ± 4 and 3 ± 5 operational taxonomic units (OTUs) were found in surface's samples in the UIA and GW group respectively. These values were significantly lower (p < .001) compared to the number of preoperative OTUs in those groups (155 ± 79 and 187 ± 121). In assessing beta diversity, there were no significant differences found in pre-treatment samples (R = .090, p = .070 ANOSIM with Bonferroni corrections). Also, no significant differences in community composition were observed in post-treatment samples (R = -.05, p = .829). After treatment, there was a significant reduction of Eubacterium using conventional treatment with UIA and a significant reduction of Prevotella using minimal instrumentation with GW irrigation (p = .007 and p = .002 respectively).

CONCLUSION

Quantitative PCR analysis revealed a significant reduction in microbial load for GW group. Overall, diversity changes were similar between UIA and GW irrigation in this ex vivo model that used extracted teeth with a history of pulp necrosis. OTUs obtained from the surface sample were negligible and did not affect the statistical outcome of the study.

Postoperative pain of minimally invasive root canal treatment:a randomized clinical trial

This randomized clinical trial compared postoperative pain between a minimally invasive (MP) and conventional root canal treatment protocol (CP). A total of 170 mature permanent teeth (either with vital or necrotic pulp), were randomly assigned into two groups. In the CP group, ProTaper Gold (Dentsply Sirona, Ballaigues, Switzerland) and a continuous wave of condensation technique were used, whereas, in the MP group, TruNatomy (Dentsply Sirona), ultrasonic-assisted irrigation (UI), calcium hydroxide, and a sealer-based obturation technique were used. Patients recorded preoperative and postoperative pain using a 0-10 numerical rating scale (NRS) at 4 h, 1, 2, 3, 4, 5, 6, and 7 days after instrumentation and 1 day after canal obturation, respectively. There were no significant differences in pain intensity at any time points assessed between the two groups (p > 0.05). The occurrence of moderate/intense pain after instrumentation was significantly associated with preoperative periapical index (PAI) (p = 0.017) and NRS scores (p < 0.001). Preoperative pulp status (p = 0.009) and NRS score (p = 0.006) were identified as significant factors in the occurrence of moderate/intense pain after obturation. Instrumentation unequivocally reduced pain severity for both groups. The post-endodontic pain associated with the use of MP, combined with UI, Ca(OH)2, and calcium-silicate cement, did not differ from that of CP. Preoperative pain score, PAI, and preoperative pulp status were determined to be prognostic factors for postoperative pain.

A novel simplified approach for endodontic retrograde surgery in short single-rooted teeth

BACKGROUND

High technical thresholds, long operative times, and the need for expensive and specialized equipment impede the widespread adoption of endodontic microsurgery in many developing countries. This study aimed to compare the effects of a simplified, cost-effective, and time-efficient surgical approach involving orthograde obturation using biological ceramic material greater than 6 mm combined with apicoectomy for single-rooted teeth with short lengths with those of the conventional and current standard methods.

MATERIALS AND METHODS

Forty-five premolars equally categorized into three groups: conventional surgery group, standard surgery group, and modified surgery group. A µCT scan was used to calculate the volume of voids. A micro-leakage test and scanning electron microscope (SEM) were performed to assess the sealing effect. Additionally, four cases of chronic periapical periodontitis in the anterior region were selected, and the patients received either the modified approach or the standard surgery for endodontic microsurgery.

RESULTS

The volumes of voids in the apical 0-3 mm of the modified group and the standard group were comparable. The micro-leakage test and SEM examination demonstrated closely bonded fillings in the dentinal walls in both the modified surgery group and standard surgery group. The outcomes of the preliminary application of this modified procedure on patients were successful at the time of the follow-up cutoff.

CONCLUSIONS

The modified surgery group exhibited similar root canal filling and apical sealing abilities with the standard procedure for single-rooted teeth with short lengths (< 20 mm). The preliminary application of this modified surgical procedure achieved favorable results.

Push-out bond strength and SEM fractographical analysis of hollow fibre posts used with self-adhesive resin cement: a pilot study

Detachment is the major cause of failure of endodontic fibre posts. Hollow posts have been recently introduced to overcome such issue. The primary aim of this pilot study was to compare the push-out bond strength of hollow posts and traditional solid posts. Eight round-shaped single-canal premolars extracted for periodontal reason were selected as sample and equally randomized into two groups: (i) traditional solid fibre posts-TECH21xop and ii) hollow fibre posts-TECHOLE. A dual-curing self-adhesive cement (new TECHCEM) was used for posts placement. Six horizontal sections-two from each portion of the root (coronal, middle and apical)-were obtained from each sample root, yielding a total of 24 sections for each group. Push-out test was performed on the sections and bond strength values were compared between groups and within each group. Scanning electron microscope (SEM) fractographical analysis was conducted on each section. Additional SEM and EDX analyses were performed on new samples of both posts, to assess fibres density and distribution, and the chemical composition of the fibres and the matrix. Hollow posts showed a significantly higher push-out bond strength (6.36 ± 1.22 MPa) than solid posts (3.64 ± 1.62 MPa). Among the three root portions of the same group, there was no significant difference in bond strength. In both groups, the most frequent type of fracture was a mixed adhesive failure with the cement covering 0 to 50% of the post perimeter. Hollow post fibres appear more similar in size and have a more homogeneous distribution, compared to solid posts. The two post types also have different chemical compositions.

The Complexity of the Root Canal Anatomy and Its Influence on Root Canal Debridement in the Apical Region: A Review

The main goal of root canal treatment is to eliminate the infection in the complex root canal system for the long-term preservation of a functional tooth. Proper debridement of the root canal system, especially in the apical portion, is essential for successful root canal treatment. The complexity of the canal anatomy in the apical region plays a crucial role in reducing the microbial load. Therefore, clinicians must have a thorough knowledge of the anatomy of the root canal system and its variations, especially in the apical portion. Root canal configurations in cross-section have been classified as round, oval, long oval, flattened, or irregularly shaped. Treating oval, long oval, flattened, or irregularly shaped canals is challenging and should be approached differently than a circular canal. Recognizing the root canal shape and apical anatomy determines the different strategies to be used in cleaning, shaping, and obturation to achieve the best result of root canal treatment. The recent development of the instrumentation system improves the treatment outcome for clinicians and patients. This review aimed to discuss the definition, prevalence, and instrumentation for cleaning and shaping in the apical area with the complexity of root canal systems. Therefore, with the aid of this review, we can better understand the variations in the anatomy of the root canal, especially at the apical portion.

Traditional and Recent Root Canal Irrigation Methods and Their Effectiveness: A Review

According to contemporary dental standards, the primary goal of endodontic therapy is the chemo-mechanical cleaning of the complex root canal system. Watering root canals with approved solutions and activating them are essential parts of this operation. This review outlines various irrigant activation methods for root canal therapy. Specifically, a comparison among the methods of manual dynamic activation, sonics (subsonic, sonic, and ultrasonic), internal heating, and lasers, was conducted. The results in this work were gathered using Scopus, Web of Science, Google Scholar, and PubMed databases by searching the following keywords: sodium hypochlorite, cleaning, activation, and irrigation methods. The present work concluded that the use of irrigant activation has a greater benefit than its absence. Regardless, it is impossible to point to a single effective activation method.

The efficacy of a novel SWEEPS laser-activated irrigation compared to ultrasonic activation in the removal of pulp tissue from an isthmus area in the apical third of the root canal

This study aimed to evaluate the efficacy of Shock Wave Enhanced Emission Photoacoustic Streaming (SWEEPS) in the removal of remaining pulp tissue from the root canal isthmus area in lower molars and compare it with ultrasonically activated irrigation (UAI) and conventional needle irrigation (NI). Forty-one lower molars with isthmuses between mesial canals were included in the study. The teeth were randomly distributed into experimental groups (n = 12/each) based on the final irrigation protocol (SWEEPS, UAI, or NI) and a control group (C) (n = 5). The traditional access cavity of the mesial part of each tooth was made in all samples. The mesial root canals in the experimental groups were instrumented with a Wave One Gold Primary (25/.07) file using 3% sodium hypochlorite (NaOCl) while the distal canal served as a control for the presence of pulp tissue. No treatment was performed in the C group. Sections from the isthmus region were processed for histopathology to measure the remaining pulp tissue (RPT). The results were analyzed using analysis of variance and the Kruskal-Wallis test (α = 0.05). There were no significant differences in the relative surface area of root canals and isthmus among the groups (p > 0.05). Samples in the SWEEPS group had significantly less RPT than UAI, NI, and C (p = 0.003, 0.014, 0.003, respectively). There were no significant differences between the UAI and NI (p = 0.583). SWEEPS was the most efficient in debridement of the root canal isthmus area. UAI and NI showed similar but lower efficiency.

Effects of Conservative Access and Apical Enlargement on Shaping and Dentin Preservation with Traditional and Modern Instruments: A Micro-computed Tomographic Study

INTRODUCTION

This ex vivo study aimed to evaluate the shaping abilities and preservation of dentin with traditional and modern instruments after using sizes 25 and 40 in oval canals of mandibular incisors with conservative access.

METHOD

Thirty mandibular incisors with single straight oval canals were selected and assigned into 2 groups (n = 15) according to the instrument system used during preparation, Slim Shaper (SS) plus Apical Shaper (AS) and Protaper Gold (PG). The samples were subjected to micro-computed tomography before and after preparation with sizes 25 and 40. The shaping parameters evaluated included canal volume and surface area, amount of unprepared root canal walls, and reduction in pericervical dentin.

RESULTS

Canal volume and surface area were significantly increased after enlargement with each instrument size (P < .01). The percentage of unprepared areas showed a significant intragroup decrease after using PG F2 and F4 or SS 3 and AS (P < .05). Intergroup comparison showed no significant differences. Pericervical dentin was reduced in all groups. The intragroup comparison only revealed a significant reduction (P < .01) between PG F2 and F4. In addition, a significant decrease in pericervical dentin (P < .05) was observed between PG F4 40/.06 and AS 40/.03. No significant differences were observed between PG F2 25/.08 and SS 3 25/.04.

CONCLUSION

Increasing the instrumentation size from 25 to 40 significantly reduces the percentage of unprepared areas regardless of the system used. In addition, using a modern system with a regressive taper allows the maintenance of pericervical dentin without compromising shaping efficacy in the apical third of the mandibular incisors with oval canals and conservative access.

Multispecies biofilm removal by a multisonic irrigation system in mandibular molars

AIM

The aim of the study was to assess biofilm removal efficacy of GentleWave System and passive ultrasonic irrigation (PUI).

METHODOLOGY

Twenty-two human mandibular molars with Vertucci's type II configuration in the mesial root were selected. Teeth were autoclaved, inoculated with dental plaque and incubated in a CDC biofilm reactor for two weeks. The mesial roots were instrumented up to 20.06 file (V-Taper) for the GentleWave group and up to 35.04 file (Vortex Blue) for PUI group. Irrigation was performed using GentleWave and PUI irrigation protocols (n = 11). Dentine debris on paper points samples were obtained for quantitative real-time polymerase chain reaction (qPCR) and 16S ribosomal RNA gene sequencing (next-generation aequencing-NGS). For qPCR, a non-parametric test (α = 0.05) was used. Next-generation sequencing data were analysed using mothur, with alpha diversity calculated as the Shannon and Chao1 indices and Bray-Curtis dissimilarities were used for beta diversity. Differences in alpha diversity and abundances of genera were evaluated using Kruskal-Wallis test. Differences in community composition were evaluated using analysis of similarity with Bonferroni correction for multiple comparisons.

RESULTS

Quantitative real-time polymerase chain reaction results showed that the reduction estimated in percentages for both groups was equivalent (p > .05). NGS analysis showed that both techniques promoted a significant reduction in reads and OTUs number (p < .05). Shannon alpha diversity and Chao1 index showed no differences between pre- or post-treatment samples for both groups (p > .05). Additionally, pre-treatment communities differed from post-treatment samples in both groups regarding bacterial taxa reduction (ANOSIM R = 0.50 and 0.55, p < .001).

CONCLUSIONS

Bacterial reduction in mesial roots of mandibular molars prepared to 35.04 with PUI was similar to those prepared to 20.06 with a multisonic irrigant activation system.

Effectiveness of Different Final Irrigation Procedures on Enterococcus faecalis Infected Root Canals: An In Vitro Evaluation

This study aimed to evaluate the antibacterial effect of three final irrigation protocols and to compare their ability to remove the smear layer and debris from the root canal. Methods: Sixty-three single-rooted human teeth were inoculated with Enterococcus faecalis for 14 days. The teeth were divided into a positive control group (N = 3) and three treatment groups (N = 20) as follows: final irrigation with saline solution (control group), irrigation with 5.25% NaOCl ultrasonically activated with EndoUltra (EU), standard needle irrigation with Qmix 2in1 (Qx) and irrigation with 5.25% NaOCl activated using SiroLaser Blue (SB). The bacterial load was evaluated by analyzing the colony-forming units (CFU/mL). Selected specimens were split longitudinally and examined using scanning electron microscopy in order to determine the presence of a smear layer and debris. Statistical analyses were performed using one-way ANOVA and the Kruskal−Wallis rank-sum test. Results: Activation of NaOCl with EndoUltra or SiroLaser Blue was superior at reducing intracanal bacteria relative to standard needle irrigation with Qmix 2in1 solution (p < 0.05). Even though SiroLaser Blue showed the best results for removing the smear layer and debris, no significant differences were detected between the groups (p > 0.05). Conclusions: Final irrigation with 5.25% NaOCl ultrasonically activated using EndoUltra or SiroLaser Blue demonstrated a higher efficacy in bacterial reduction than standard needle irrigation with Qmix 2in1.

In vitro efficacy of a non‐instrumentation technique to remove intracanal multispecies biofilm

Aim

The aim of this study was to assess the efficacy of a non‐instrumentation technique to disinfect root canals infected by a human dental plaque‐derived multispecies biofilm.

Methodology

Twenty‐two mandibular incisors were accessed, autoclaved and inoculated with dental plaque. The Center for Disease Control biofilm reactor was used to promote contamination of the root canal space. In the conventional technique (control), the specimens were instrumented until size 35/04 and irrigated with 6% NaOCl. In the non‐instrumentation technique, a glide path was established using K‐files size 10–20 and specimens were immediately cleaned with the GentleWave System. Samples were obtained for culture and 16S rRNA gene sequencing. Differences in abundances of genera were evaluated using Kruskal–Wallis test, and differences in alpha diversity were compared using anova. Alpha and beta diversity indices were calculated using mothur. The Shannon and Chao1 indices were used to measure alpha diversity. The Bray–Curtis dissimilarity was used to measure beta diversity. Differences in community composition were evaluated using analysis of similarity with Bonferroni correction for multiple comparisons.

Results

The total numbers of reads in biological samples ranged from 126 to 45 286. Significantly fewer reads were obtained from samples following cleaning by either method (p < .0001), and significantly fewer reads were obtained in post‐cleaning samples following conventional versus non‐instrumentation cleaning regiment (p = .002). Communities in pre‐treatment samples were similar in both groups; however, significantly greater relative abundances of Streptococcus, Veillonella and Campylobacter were observed following cleaning using non‐instrumentation technique (Kruskal–Wallis p = .009, .033, and .001, respectively). Whilst no significant differences were observed in Shannon alpha diversity, the Chao1 index was significantly lower in post‐cleaning samples.

Conclusions

Significant shifts in composition were observed following cleaning by using both regimens, but the impact of this change was greater following a conventional cleaning technique.

Microbiological Aspects of Root Canal Infections and Disinfection Strategies: An Update Review on the Current Knowledge and Challenges

The oral cavity is the habitat of several hundreds of microbial taxa that have evolved to coexist in multispecies communities in this unique ecosystem. By contrast, the internal tissue of the tooth, i.e., the dental pulp, is a physiologically sterile connective tissue in which any microbial invasion is a pathological sign. It results in inflammation of the pulp tissue and eventually to pulp death and spread of inflammation/infection to the periradicular tissues. Over the past few decades, substantial emphasis has been placed on understanding the pathobiology of root canal infections, including the microbial composition, biofilm biology and host responses to infections. To develop clinically effective treatment regimens as well as preventive therapies, such extensive understanding is necessary. Rather surprisingly, despite the definitive realization that root canal infections are biofilm mediated, clinical strategies have been focused more on preparing canals to radiographically impeccable levels, while much is left desired on the debridement of these complex root canal systems. Hence, solely focusing on "canal shaping" largely misses the point of endodontic treatment as the current understanding of the microbial aetiopathogenesis of apical periodontitis calls for the emphasis to be placed on "canal cleaning" and chemo-mechanical disinfection. In this review, we dissect in great detail, the current knowledge on the root canal microbiome, both in terms of its composition and functional characteristics. We also describe the challenges in root canal disinfection and the novel strategies that attempt to address this challenge. Finally, we provide some critical pointers for areas of future research, which will serve as an important area for consideration in Frontiers in Oral Health.

Influence of apical preparation size and final irrigation protocol on the debridement of oval root canals

This study assessed the influence of apical preparation size and final irrigation protocol on the debridement of the apical third of oval root canals of mandibular molars. Seventy-seven distal roots were divided into 7 groups (n = 11): Control: without instrumentation or irrigation; Group 30CI: ProTaper Next (up to size 30; PTN) + conventional irrigation (CI); Group 30UAI: PTN + ultrasonically activated irrigation (UAI); Group 30XPF: PTN + XP-endo Finisher (XPF); Group 40CI: PTN + ProDesign Logic (up to size 40; PDL) + CI; Group 40UAI: PTN + PDL + UAI; and Group 40XPF: PTN + PDL + XPF. The total volume of irrigating solutions used per root canal in all the experimental groups was 33 mL of 2.5% sodium hypochlorite (NaOCl) and 6 mL of 17% ethylenediaminetetraacetic acid (EDTA). After specimen processing and histological analysis under a digital microscope (100x), the percentages of untouched canal walls (UCW) and remaining debris (RD) were assessed using Image J software. A descriptive and exploratory analysis was conducted, indicating that the data failed to meet the assumptions of an analysis of variance. Therefore, generalized linear models were used to assess the effects of the different instrumentation and irrigation protocols, as well as the interaction among them, on the percentage of UCW and RD. No significant difference was found among the irrigation protocols regarding the percentage of UCW, irrespective of apical preparation size (p>0.05). However, UCW and RD were significantly lower in groups 40CI, 40UAI and 40XPF than in groups 30CI, 30UAI and 30XPF (p<0.05). The percentage of RD was significantly lower in the UAI and XPF groups than in the CI groups, irrespective of apical preparation size (p<0.05). The difference between preparation sizes 30 and 40, with respect to RD, was higher when CI was used (p<0.05). In conclusion, instrumentation up to apical preparation size 40 resulted in lower percentages of UCW and RD than up to apical preparation size 30. Use of UAI or XPF resulted in lower percentages of RD than CI.

Influence of Commonly Used Endodontic Irrigants on the Setting Time and Metal Composition of Various Base Endodontic Sealers

The present study aimed to evaluate if commonly used endodontic irrigants such as 3% sodium hypochlorite (NaOCl, Prime Dental, Thane, India), 2% chlorhexidine (CHX, Sigma-Aldrich Co., St. Louis, MO, USA), and 17% ethylenediaminetetraacetic acid (EDTA, Meta-Biomed Co. Ltd., Cheongju-si, South Korea) influenced the setting time and metal composition of different base endodontic sealers on exposure. AH Plus (Dentsply De Trey GmbH, Konstanz, Germany), Sealapex (SybronEndo, Orange, CA, USA), mineral trioxide aggregate (MTA) Fillapex (Angelus Soluções Odontológicas, Londrina, Brazil), and Tubli-Seal (Kerr Dental, Orange, CA, USA) were selected as the different base representatives of endodontic sealers. These sealers were exposed to 3% NaOCl, 2% CHX, and 17% EDTA, and the individual setting time of the sealers was analyzed. The samples were analyzed for heavy metal elements such as chromium (Cr), nickel (Ni), cobalt (Co), cadmium (Cd), arsenic (As), mercury (Hg), lead (Pb), and beryllium (Be) by using inductively coupled plasma mass spectrometry (ICP-MS) analysis. For statistical analysis, one-way ANOVA and post hoc Tukey’s tests were used. All selected sealers showed variation in setting time post-exposure to different irrigants. MTA Fillapex had the shortest mean setting time (215.7 min, post-exposure at 187.3 min) (p < 0.05). Mean setting time was also affected for AH Plus (479.6 min, post-exposure at 423.9 min) (p < 0.05) and Tubli-Seal (514.7 min, post-exposure at 465.2 min) (p < 0.05). Sealapex showed the maximum reduction of setting time (864.8 min, post-exposure at 673.4 min) (p < 0.05). All tested sealers showed heavy metals (Cr, Ni, Co, Cd, As, Hg, and Pb) in their composition, and the quantities were influenced by interaction with different irrigants. The heavy metal Be was not seen in any of the samples. Sealapex showed the longest setting time in comparison to other test sealers. Heavy metals were most present in Sealapex, followed by AH Plus, Tubli-Seal, and MTA Fillapex. MTA Fillapex was seen to have the shortest setting time, and heavy metal composition was least affected on interaction with different commonly used endodontic irrigants. Further, this study provides significant insight into the influence of different endodontic irrigants on interaction with different base endodontic sealers, which has not been reported previously, and future studies should emphasize endodontic irrigant-sealer interactions and their possible effects in the long run.

Novel laser activated photoacoustic streaming for removing pulp remnants from round root canals after single file reciprocating instrumentation: Photoacoustic streaming for removing pulp

BACKGROUND

This study evaluated the efficacy of a new laser-assisted irrigation system, the shock wave enhanced emission photo-acoustic streaming (SWEEPS) technique in removing pulp tissue from single-rooted premolars.

METHODS

Freshly extracted mandibular premolars with round root canals (n=40), scanned using cone beam computed tomography, were randomly divided into control and four experimental (according to the irrigation technique used) groups (n=8/group). Groups 1, 2, and 3 were instrumented using Reciproc Blue (RB25/.06) followed by final irrigation protocol (FIP), activated by SWEEPS, ultrasonically activated irrigation (UAI), and conventional irrigation (CI), respectively. In these groups, 7 mL 3% NaOCl in total was used during instrumentation; for FIP, 3% NaOCl (60 s), ethylenediaminotetraacetic acid (60s), and 3% NaOCl (30s). In group 4, SWEEPS activation of 3% NaOCl for 6 × 30 s alone was performed. The untreated control group specimens were processed for histological evaluation of remaining pulp tissue (RPT) in each canal third. The results were analyzed using the Mann-Whitney U test (α =0.05).

RESULTS

Significant differences were observed between the control group and the experimental groups (p<0.05). In the middle third, the UIA and SWEEPS showed similar efficacy (p=0.171), superior to CI and SWEEPS without instrumentation (p<0.05). In the apical third, SWEEPS was the most efficient (p=0.002), and UIA and CI showed no difference (p=0.643).

CONCLUSION

SWEEPS was superior to UIA and CI in removing RPT in the apical region of round canals after single instrument root canal preparation; SWEEPS without instrumentation was inefficient in removing pulp tissue.

Candida albicans Antimicrobial and Antibiofilm Activity of Novel Endodontic Solvents

Background: Candida albicans is the most prevalent fungi isolated in endodontic infections. In this study, the ability of C. albicans biofilm to tolerate the novel solvent mixtures methyl ethyl ketone (MEK)/tetrachloroethylene (TCE) and MEK/orange oil (OOil) sequentially to the standard irrigation of sodium hypochlorite (NaOCl) and ethylenediaminetetraacetic (EDTA) was evaluated. Methods: Biofilm cell cultures of C. albicans SC 5314 were treated sequentially with NaOCl and EDTA and exposed to MEK/TCE or MEK/OOil. The effect of the antimicrobial treatment was evaluated using the disk diffusion method for planktonic culture, and the enumeration of colony-forming units (CFUs) and scanning electron microscope (SEM) for biofilm cell culture. Results: C. albicans mature biofilm (24 h) was significantly reduced in biomass and cell viability after solvent mixtures’ exposure, compared with the previous NaOCl and EDTA treatments. MEK/OOil combination caused a total reduction of biofilm, while with MEK/TCE, there was a 3-log (CFU/cm2) reduction compared with the sequence NaOCl and EDTA, and a 4-log (CFU/cm2) reduction compared with the control. Conclusions: The additional exposure of a preformed 24 h C. albicans biofilm to novel solvent mixtures MEK/TCE and MEK/OOil caused a positive antibiofilm impact, overcoming the performance of the conventional endodontic irrigating protocol.

Supplementary solvent irrigation efficacy on filling remnants removal comparing XP-endo Finisher R vs IrriSafe

This study aimed to compare the efficacy of XP-endo Finisher R and IrriSafe, with a solvent mixture of Methyl ethyl ketone/Tetrachloroethylene (MEK/TCE), in the removal of root filling residues. Twenty-four human mandibular incisors were pair-matched by micro-computed tomography according to volume and aspect ratio. After retreatment, specimens were allocated to two experimental groups (n = 12), according to the supplementary instrument used. The volume of residual filling material after each irrigating step and the time for retreatment was calculated. Statistical analyses were carried out using Mann-Whitney test, with a significance level of 5%. The volume of initial root canal filling material between the groups was similar (p > 0.05). With the final irrigation protocol (NaOCl and EDTA) the volume of the filling remnants decreased significantly (p < 0.05) with no differences between IrriSafe or XP-endo Finisher R (p > 0.05). The additional solvent mixture MEK/TCE increased the efficiency of filling materials reduction, regardless of the agitating instruments employed, IrriSafe or XP-endo Finisher R (p < 0.05). There was no difference between the two groups regarding the time (p = 0.149). Both supplementary instruments were effective in the reduction of filling remnants. The additional step with a solvent mixture of MEK/TCE enabled a total recovery of patency and the achievement of cleaner canals, independently of the agitation instrument.

Syringe Irrigation in Minimally Shaped Root Canals Using 3 Endodontic Needles: A Computational Fluid Dynamics Study

INTRODUCTION

The aim of this study was to compare the irrigant flow in curved root canals prepared to various apical sizes by constant-taper or variable-taper instruments during syringe irrigation with 3 endodontic needles at 2 different flow rates.

METHODS

Two matched curved mesial root canals of human mandibular molars were imaged by micro-computed tomographic imaging after preparation to apical size 20, 25, and 30/.06 taper either by constant-taper or variable-taper instruments. A Computational Fluid Dynamics model was used to simulate the irrigant flow in the 2 root canals prepared to each apical size during syringe irrigation with a 30-G open-ended needle and 30-G and 31-G closed-ended needles at 0.05 and 0.15 mL/s.

RESULTS

The irrigant could not penetrate up to the working length in root canals prepared to apical size 20 or 25/.06 taper. The 30-G open-ended needle combined with the low flow rate allowed the irrigant to reach the working length in size 30/.06 taper root canals while maintaining a relatively low apical pressure, but the wall shear stress was very low. The 31-G closed-ended needle combined with the high flow rate also delivered the irrigant to the working length in size 30 root canals and developed higher wall shear stress, but the apical pressure was also higher.

CONCLUSIONS

Syringe irrigation using 30-G and 31-G needles was compromised in minimally shaped root canals.

Root canal debridement by negative pressure irrigation, ultrasonically activated irrigation and their combination

Despite scientific evidence that root canal debridement is the cornerstone for successful treatment, the effectiveness of a combination of delivery and activation systems in cleaning root canals remains unknown. This study is the first to demonstrate the remaining pulp tissue in root canals after irrigation with various techniques such as positive pressure syringe-and-needle irrigation, ultrasonic activation, negative pressure irrigation and ultrasonic activation after negative pressure irrigation. The results showed that negative pressure irrigation alone and its combination with ultrasonic activation resulted in significantly superior effectiveness than positive pressure irrigation and ultrasonic activation alone in the apical-third of root canals.

Conservative shaping combined with three-dimensional cleaning can be a powerful tool: Case series

Conservative endodontics has been introduced about a decade ago. Since then, it has been demonstrated that less canal preparations lead to more dentin preservation resulted in decreased stress on tooth structure, mainly in the coronal third of the root, and potentially a higher resistance to fracture. In addition, smaller and larger canal preparations were comparable with regard to the cleanliness of the root canal. The purpose of this case series was to report on the outcome of root canal treatments following a conservative canal preparation, followed by three-dimensional cleaning technique (intracanal heating and ultrasonic activation of NaOCl).

Micro-CT evaluation of maxillary first molars: interorifice distances and internal anatomy of the mesiobuccal root

This study aimed to describe the morphometric relationship of root canal orifices on the pulp floor in the presence/absence of mesiobuccal second canal (MB2) in the maxillary first molars and other aspects of its internal anatomy. Sixty-two maxillary first molars were scanned by micro-CT. The presence of the MB2 canal was verified. The distance between the center points of the MB1, MB2, distobuccal (DB), and palatal (P) canal orifices on the pulp floor were measured (MB1-MB2, MB1-DB, MB2-DB, MB1-P, and DB-P). The MB1-P to DB-P ratio was calculated. The distances between the anatomic apex and the MB1 and MB2 apical foramina were measured. The length of the band-shaped isthmus was also measured. Student's t-test was applied to verify the association between the presence of an MB2 canal, the interorifice distances, and the ratio of the MB1-P to DB-P distance (α = 5%). The MB2 canal was present in 43 roots (69.35%). Statistics showed significant differences when MB2 was present for the largest MB1-P distance (p < 0.05) and higher values for the MB1-P to DB-P ratio (p < 0.05). A band-shaped isthmus was detected in 25.8% of MB roots. The mean distance from the apical foramen to the isthmus floor ranged from 1.74 for MB1 canals to 1.42 for MB2 canals. Canal orifice distances on the pulp floor may predict the presence of MB2 canals. There was a high incidence of isthmus, accessory canals, and apical delta in the critical apical zone in MB roots of maxillary first molars.

Comparison of the Effect of Three Irrigation Techniques and Root Canal Preparation Size on Sodium Hypochlorite Penetration into Root Canal Dentinal Tubules

Objective

This study aims to compare the effects of conventional syringe irrigation (CSI), passive ultrasonic irrigation (PUI), and innovative sonic-powered irrigation (EDDY) on the penetration of sodium hypochlorite (NaOCl) solutions into root canal dentinal tubules at different levels of the root canal.

Materials and Methods

One hundred ninety-two extracted first mandibular premolars of 17- to 25-year-old patients were decoronated 13 mm from the root apices and separated into two groups according to apical preparation sizes (APS) 25 and 40. The root canals were dried with a paper point and stained in crystal violet for 72 hours. Each APS group was separated into three groups according to irrigation techniques, as follows: CSI, PUI, and EDDY. Roots were perpendicularly resected to the long axis at three levels (coronal, middle, and apical). Photomicrographs were taken of all three cross-sections of each tooth under a stereomicroscope. The depth of the bleached zone was measured with ImageJ software. The data were analyzed by Welch's analysis of variance and an independent t-test (p = 0.05).

Results

No penetration was found at the apical level in the CSI25, CSI40, and PUI25 groups. The EDDY25 and EDDY40 groups showed the most significant penetration at the middle and apical levels compared to the other groups (p < 0.05).

Conclusions

Within the limitations of this study, irrigation techniques and APS affect the penetration depth of NaOCl into the root canal dentinal tubules. In terms of irrigation techniques, the penetration was deepest when EDDY was used, followed by PUI and CSI. In terms of APS, NaOCl penetrated deeper into APS40 than APS25. The use of the EDDY irrigation technique in APS25 can improve the penetration of NaOCl into root canal dentinal tubules at the apical level.

Assessment of irrigant flow and apical pressure in simulated canals of single-rooted teeth with different root canal tapers and apical preparation sizes: An ex vivo study

Background:

Irrigation dynamics vary in optimally shaped canals. Various factors combine to create a stress-induced environment leading to a dynamic irrigant flow.

Aim:

The aim of the study is to evaluate the irrigant flow and apical pressure using 30G open-ended needle in virtually created root canal model of single-rooted teeth.

Materials and Methods:

Sixty extracted single-rooted premolars were selected and prepared using a single rotary instrument Hyflex CM and grouped as – Group I: 30 size 0.6% taper (n = 15), Group II: 30 size 0.4% taper (n = 15), Group III: 25 size 0.6% taper (n = 15), and Group IV: 25 size 0.4% taper (n = 15). Postinstrumentation imaging was carried out using cone-beam computed tomography, and computer-aided design models were obtained. Subgrouping was done based on the nozzle position, and computational fluid dynamic analysis was carried out for the respective parameters assessed.

Results:

Statistical significance was elicited in all the groups at different nozzle positions analyzed (P < 0.05). A post hoc test revealed significance in the mean flow rate and flow velocity in Group I at low nozzle position (P < 0.05) as compared to others.

Conclusions:

30 size 0.6% tapered preparations proved efficient irrigant flow and least apical pressures at all nozzle positions.

Investigation of an Improved Side-Vented Needle and Corresponding Irrigation Strategy for Root Canal Therapy with CFD Method

BACKGROUND AND OBJECTIVE

This research aimed to present an improved side-vented needle and explore its availability as well as the corresponding irrigation strategy.

METHODS

A CFD model was used to simulate the irrigant flow in a simplified prepared round root canal with an apical delta respectively with different needles for irrigation. The needle types include flat end-tip needle, original side-vented needle, and improved side-vented needle. Different insertion depths and inlet velocities were contrastively studied, as well as the gap size between the bulb at the end tip of the improved side-vented needle and the root canal. The study includes a total of 13 schemes. Velocity, pressure, and shear stress in the root canal were measured to contrast the internal flow-field details and irrigation efficiencies between different schemes.

RESULTS

Poor irrigation replacement appeared in the schemes without enough needle insertion no matter which kind of needle has been used, though relatively lower pressure emerged at the apical foramen. On the contrary, deepening needle insertion not only brings better irrigant replacement but also higher apical foramen pressure. The original side-vented needle tends to make lower pressure at the apical foramen and simultaneously worse irrigant replacement as compared to the flat end-tip needle. The fluid entering the apical anatomy part deceases a lot as the original side-vented needle was replaced by the improved one. The scheme using the improved side-vented needle with gap size ratio and inlet velocity respectively equaling 5.0% and 5.50m/s can be considered the best one.

CONCLUSIONS

The improved side-vented needle can ensure acceptable irrigant replacement performance without leading to a high-pressure level at the apical foramen. The gap between the bulb and the wall of the root canal is very crucial for the pressure at the apical. The ideal irrigation strategy is ensuring the gap equals zero. However, it is a little hard to realize during the whole procedure of the root canal preparation except the final step. Consequently, another strategy that keeping the value of gap size ratio as small as possible such as less than 15% and simultaneously ensuring lower-velocity coming fluid, is necessary in the non-final irrigation.

The potential effect of instrumentation with different nickel titanium rotary systems on dentinal crack formation-An in vitro study

The potential mechanical impact of different rotary systems used for root canal preparation has been a matter of debate for long. The aim of this study was to explore the incidence of dentinal cracks after root canal instrumentation with various rotary systems, in vitro. One hundred and eighty intact lower central incisors were selected and randomly divided into fourteen treatment groups (n = 12/group) and a control group (n = 12). After decoronation, the root canals were instrumented with fourteen different rotary systems (E3, E3 azure, NT2, Hyflex CM, Hyflex EDM, 2Shape, OneCurve, ProTaper Next, ProTaper Gold, WaveOne Gold, Mtwo, Reciproc Blue, TF adaptive, K3XF). All roots were horizontally sectioned at 3, 6, and 9 mm from the apex with a low-speed saw under water-cooling. The slices were then examined under stereomicroscope for dentinal cracks. No cracks were found in the control group. Cracks were found in all treatment groups, predominantly in the 3 mm slices. There was no statistically significant difference in the number of cracks when comparing the different systems to each other at any section level. At 3 mm, however, five of the studied systems, namely K3XF (p = 0.004), Protaper Next (p = 0.001), Reciproc Blue (p<0.001), TF adaptive (p = 0.050), and 2Shape (p = 0.009) presented a significantly higher number of cracks than the control group. Within the limitations of this study, instrumented canals presented dentinal cracks, while uninstrumented ones presented no cracks after sectioning. There seems to be no significant difference among the tested systems regarding crack formation in the instrumented root canal wall. Crack formation occurred irrespective of the motion of the rotary system (rotational or reciprocation). Further studies are needed to clarify the factors that contribute to crack formation in the case of each individual rotary system.

Current Trends in the Use of Irrigant Activation Techniques Among Endodontists & Post-Graduate Dental Students in India -A Knowledge, Attitude and Practice Based Survey

Objective:

The aim of this survey was to examine the practice/use of Irrigant Activation Techniques (IAT) among Endodontists and post-graduate dental students in India.

Methods:

An invitation to participate in this survey was sent by electronic mail to 902 members of Indian Endodontic society. A total of 32 questions were finalized for the survey after validation by five endodontic experts. Survey contained 2 demographic questions, 7 knowledge based questions, 11 questions on attitude and 12 questions on practice of IAT. The reliability was checked by randomly asking 10 participants to fill the survey forms again after 15 days. The data was analyzed using chi-square test (P<0.05).

Results:

The overall response rate for the survey was 30.5%. The content validity ratio for the questionnaire was 0.972 & the reliability calculated using Kappa scores was 0.978. Most of the respondents (87.3%) use IAT, while 4.7% do not use IAT. Most commonly used IAT was Manual dynamic agitation (MDA) used by 28.7%, followed by Ultrasonics in 17.2%. Sonic & negative pressure (EndoVac) was used by less than 10% of respondents. Combination of IAT was used by 39%. In 23 (5 on knowledge, 9 on attitude & 9 on practice) out of the 32 questions in this survey, there was a statistically significant difference (P<0.05) in the answers between the groups, with post-graduate dental students opting the correct choices. Sodium hypochlorite (NaOCl) is the preferred choice of irrigant for IAT according to 48.6%, Chlorhexidine (CHX) is used by 4.2% & Ethylene diamine tetra acetic acid (EDTA) by 2.4%. Combination of two irrigants is used by 28.7% and 6% use all the three irrigants.

Conclusion:

Vast majority of the Endodontist in India use some form of IAT to improve the efficacy of irrigation. MDA is the most commonly used IAT.

Effect of Sonic Agitation of a Binary Mixture of Solvents on Filling Remnants Removal as an Alternative to Apical Enlargement-A Micro-CT Study

BACKGROUND

This work aimed to evaluate the efficacy of sonic agitation of a binary mixture of solvents (methyl ethyl ketone/tetrachloroethylene) on filling remnants removal and compare the effects of solvent agitation with the enlargement to the next instrument size.

METHODS

Twenty-four mandibular incisors were prepared with ProTaper Next (X1, X2) and obturated with the single-cone technique and AH Plus sealer. The teeth were retreated with ProTaper Universal Retreatment and ProTaper Next and divided into two groups (n = 12) according to the final instrument (X3 or X4). All canals were submitted to a supplementary procedure consisting of a mixture of solvents-methyl ethyl ketone/tetrachloroethylene, agitated with EndoActivator. The volume of filling remnants was assessed through micro-computed tomography in the apical 5 mm. Statistical analysis was performed with a significance level of 5%.

RESULTS

The supplementary procedure of agitation of the solvent mixture was beneficial in both groups (p < 0.05). There were no statistically significant differences between canals re-prepared until X4 and canals re-prepared until X3 plus solvent (p > 0.05).

CONCLUSIONS

An additional step with a two-solvent solution potentiated by EndoActivator showed to be very effective for the removal of gutta-percha and resinous sealer remnants from apical root canals of mandibular incisors, avoiding further enlargement.