Advanced Material Strategy for Restoring Damaged Endodontically Treated Teeth: A Comprehensive Review

The restoration of endodontically treated teeth (ETT) remains a significant challenge in modern dentistry. These teeth often suffer from substantial structural damage due to both the original pathology and the invasive nature of endodontic procedures. Consequently, ETT are more susceptible to fractures compared to vital teeth, necessitating restorative strategies that can effectively restore both function and aesthetics while minimizing the risk of failure. In recent years, advances in adhesive dentistry and the development of high-strength ceramics have further expanded the restorative options for ETT. Bonded restorations have gained popularity as they preserve more tooth structure and enhance the overall strenght of the tooth-restoration complex. The choice of restorative material and technique is influenced by numerous factors, including the amount of remaining tooth structure, the functional requirements of the tooth, and the aesthetic demands of the patient. Despite the plethora of available materials and techniques, the optimal approach to restoring ETT remains a topic of ongoing research and debate. In this comprehensive review, the current state of and recent advances in restoring damaged endodontically treated teeth are explored. Numerous therapeutic options exist, involving a wide range of materials. This article aims to present the biomaterial advancements of the past decade and their applications, offering alternative approaches to treating damaged ETT with the goal of prolonging their retention on the dental arch and serving as a valuable resource for dental practitioners who face this issue daily.

Tooth autotransplantation and resin composite reshaping as a multidisciplinary approach for treating dental agenesia: A 10-year follow-up

CASE REPORT

This case report describes the multidisciplinary approach performed in a 9-year-old male patient with dental agenesia affecting teeth 21 and 22. Autotransplantation of the right upper second premolar with incomplete rhizogenesis to the missing area was combined with coronary reshaping with resin composite and orthodontic therapy. The treatment began with the extraction of the deciduous upper left central incisor, bone preparation for the recipient site of the donor tooth, atraumatic extraction of the right upper second premolar and immediate autotransplantation in the surgically prepared recipient site. Subsequently, sutures to reposition the flap and a rigid splint were performed. After 12 months, coronary reshaping of the autotransplanted tooth with resin composite was carried out. Orthodontic treatment involving the use of a fixed appliance was used to correct the interdental spaces and achieve adequate occlusion. Clinical and radiographic follow-up 10 years after tooth autotransplantation and 9 years after reshaping revealed partial obliteration of the pulp chamber, root resorption, ankylosis and the presence of endodontic treatment.

CONCLUSIONS

The long-term outcomes highlighted that tooth autotransplantation represents a biologically and cost-effective procedure for replacing missing teeth in young patients, particularly in cases of incomplete rhizogenesis of the autotransplanted tooth.

CLINICAL SIGNIFICANCE

This case report discusses tooth autotransplantation and resin composite reshaping as viable and long-term clinical options for treating young patients with dental agenesis.

Intentional replantation for a Class 4/Stage C cemental tear: Etiology, choice and outcomes of treatment

Cemental tears, root cracks, and associated periapical-periodontal lesions may occur simultaneously in one tooth, and can be effectively managed by intentional replantation and etiological control. A durable splint, along with occlusal and periodontal monitoring, is required as healing progresses slowly and may be insufficient.

Combined application of artificial bone powders and concentrated growth factor membranes on the autotransplantation of mature third molars: A 5-year retrospective case series

AIM

This study aimed to observe the efficacy and outcomes of the combined application of artificial bone powder and concentrated growth factor (CGF) membranes for tooth transplantation in cases with wide recipient sockets and small donor teeth.

MATERIAL AND METHODS

A total of 36 teeth from 36 patients with wide recipient sockets and small donor teeth were enrolled. Autogenous tooth transplantation was performed using bone powders and CGF membranes. After transplantation, the visual analog scale (VAS) score, Landry Wound Healing Index, probing depth (PD), mobility, and gray value of the alveolar bone around the transplanted teeth were measured, and a patient satisfaction questionnaire was administered. All patients underwent clinical and radiographic examinations during follow-up.

RESULTS

The VAS score of 16 (44.4%) cases after 1 week was 0, and 26 (72.2%) patients showed excellent gingival healing after 2-4 weeks. The PD of a few cases was deeper than 3 mm during the first month; however, returned to normal after 3 months. Although the majority of the transplanted teeth possessed mobility greater than grade I during the first month, the mobility gradually improved within 3 months. The gray value of the alveolar bone around the transplanted teeth, 1 year postoperatively showed no difference with pre-operation (p > .05). During the mean follow-up period of 42.7 months (range 20-72 months), 33 of the 36 transplanted teeth remained in situ without clinical or radiographic complications, with an overall success rate of 91.7%.

CONCLUSIONS

Although the PD and mobility of the transplanted teeth were not ideal during the early stages of healing, most of the transplanted teeth had good clinical outcomes. In cases with large recipient sites accompanied by small donor teeth, autotransplantation of teeth using artificial bone powder combined with CGF membranes is a viable option and can lead to optimistic results with favorable success rates.

Restoration of Teeth with Severely Compromised Tooth Structure using Digital Planning Combined with Orthodontic Magnetic Extrusion-A Report of 2 Cases

This report outlines 2 digitally planned cases in which the teeth underwent magnetic extrusion to preserve the supracrestal tissue attachment and regain the ferrule, followed by their restoration. Case 1: A 42-year-old man with the chief concern of a fractured right maxillary second premolar. Following the completion of root canal treatment, the remaining tooth structure was insufficient to create a ferrule for tooth restoration. For this scenario, a rapid magnetic extrusion technique was performed on tooth #4 to obtain an approximate 3-mm ferrule. The condition of both the dentition and the restorative margin was acceptable 18 months following treatment. Case 2: A 62-year-old man with the chief complaint of mobility on both sides of the maxillary arch in relation to a tooth-supported fixed partial denture (FPD). Following removal of the FPD, multiple extractions were carried out and tooth #6 was subjected to magnetic extrusion in 3 stages to a maximum of 4 mm to obtain a ferrule. At the 18-month and 3-year follow-up appointments, the tooth had no symptoms and the gingiva around the restorations had optimal architecture and margins. The 3-dimensional digital planning was helpful in precisely positioning the magnets within the tooth and the provisional restorations to facilitate axial extrusion. The extruded teeth were restored with zirconia crowns in both cases. The beneficial outcomes observed from these cases provides evidence that the integration of digital planning and magnetic extrusion holds promise as a method for reconstructing teeth with crowns that are significantly compromised.

Surgical Extrusion of Three Premolars to Re-establish the Biological Width: Case Series

AIM

This case series was to describe the use of surgical extrusion for three different cases as a technique to re-establish the biological width in patients with insufficient crown height.

BACKGROUND

Surgical extrusion serves as an important means to reestablishing a proper biological width. Such method provides an excellent alternative for the restoration of teeth with insufficient ferrule and ensuring a suitable dental restoration.

CASES DESCRIPTIONS

This case series describes the management of three different cases with compromised teeth #25, #35, and #44, respectively. The approach involved the surgical extrusion of the compromised sites from subgingival to supragingival and the splinting of the teeth using a semi-rigid splint. A successful prognosis was observed on follow-up visits.

CONCLUSION

This technique is a good alternative for general practitioners because of its easy implementation and time efficiency. In addition, the method requires less equipment and provides for adequate space for the re-establishment of biological width.

CLINICAL SIGNIFICANCE

Such technique can re-establish a healthy biological width, the existing occlusion can be maintained without alterations, and it demonstrated the suitability of surgical extrusion technique in such clinical situations. Case selection is equally important. Cases with single-rooted teeth with fractures or caries in proximity to the marginal bone level without vertical root fractures generally provide positive outcomes on providing this treatment. How to cite this article: Boreak N, Al Moaleem MM, Zain AA, et al. Surgical Extrusion of Three Premolars to Re-establish the Biological Width: Case Series. J Contemp Dent Pract 2024;25(6):593-598.

Retrospective Follow-up Assessment of Risk Variables Influencing the Outcome of Autologous Tooth Transplantation

INTRODUCTION

This retrospective study aimed to identify which patient-, donor tooth-, recipient site-, and surgical procedure-related variables may influence the outcome of tooth autotransplantation.

METHODS

The sample included 128 autotransplants performed in 122 patients. Single-visit clinical/imaging examinations were used to define the outcome as successful, survival, or failure. The association of potential indicators with the survival or failure categories was analyzed individually and adjusted for confounders through multivariate logistic regression models.

RESULTS

After a follow-up period of 1 to 30.11 years, success was achieved in 71.8% of autotransplants, whereas the survival and failure groups had rates of 14.1% each, and the grouped success/survival rate reached 85.9%. An extraoral time >15 minutes and difficult handling/placement were strong/independent risk covariates for survival and failure categories (odds ratio >1, P < .05). Additionally, unerupted/partially erupted status of the donor tooth was a significant indicator for survival, whereas deficient bone level at the recipient site, surgical extraction, poor initial stability, and lack of prophylactic antibiotics were independently linked to failure (odds ratio > 1, P < .05). The root morphology and socket status acted as modifiers of the effect of the recipient site location on the survival group (P > .05).

CONCLUSION

Based on the results of this study, unerupted/partially erupted status of the donor tooth, surgical extraction, total extraoral time >15 minutes, deficient recipient's bone level, difficult handling/placement of the autotransplant, poor initial stability, and lack of prophylactic antibiotics during the surgical procedure must be considered with caution when performing autotransplantation because of their deleterious influence on the outcome.

Midterm outcomes of autogenous mature third molars transplantation into surgically created sockets: A retrospective cohort study

BACKGROUND/AIMS

The purpose of this study was to observe the outcome of mature third molars transplantation into surgically created sockets with the assistance of computer designed three dimensional (3-D) printed replicas and compare its outcome with the conventional fresh socket autotransplantation.

MATERIAL AND METHODS

This study included total of 96 mature third molars autotransplanted in 96 cases with the guidance of computer designed 3-D printed replicas. Forty-eight teeth autotransplanted into surgically created sockets were enrolled into the surgically created socket group and 48 teeth conventionally autotransplanted into fresh sockets were enrolled into the fresh socket group. In the surgically created socket group, mature third molars were autotransplanted into surgically prepared sockets at the site of previously missed or extracted molars in the alveolar bone and in the fresh socket group, autotransplantation of mature third molars were performed in fresh sockets of extracted diseased molars simultaneously. After transplantation, the visual analogue scale (VAS) score, Landry Wound Healing Index (LWHI), mobility and probing depth (PD) of the transplanted teeth were measured and the patient satisfaction questionnaire were held in both group. All patients underwent clinical and radiographic examinations during the follow-up.

RESULTS

During the mean follow-up period of 47.63 ± 16.78 months (range 18-78 months), 92 out of 96 teeth remained in situ without clinical or radiographic complications with overall success rate of 95.83%. No statistically significant differences were found in success and survival rates between the two group. The average extra-oral time of the donor teeth were 60.76 ± 22.41 s and mean positioning trials of the donor teeth were 2.43 ± 1.19. The VAS score at Day 1 in the surgically created socket group was higher than the fresh socket group (p < .05). LWHI scores in the surgically created group were lower than the fresh socket group during the first 2 weeks (p < .05). The degree of mobility of the transplanted teeth in both group showed no statistically significant difference during the first 3 months. PD in the surgically created group were higher than the fresh socket group in the first month but there were no statistically significant difference after 1 month. Twenty-six out of 48 cases in the surgically created group needed crown restoration while only 10 cases went through crown restoration in the fresh socket group. Most patients in both group were satisfied with the treatment.

CONCLUSIONS

Autogenous mature third molars transplantation into surgically created sockets is as effective as conventional fresh socket transplantation. This technique is worth recommending in carefully selected cases and optimistic results can be achieved.

Three-dimensional analysis of the alveolar ridge profiles of maxillary central incisors in children for autotransplantation

BACKGROUND

Sufficient alveolar housing is fundamental to ensure the favorable prognosis of autotransplanted teeth. However, little is known about the alveolar ridge profiles of the anterior maxilla in children. Therefore, this study aimed to investigate the alveolar ridge profiles of the anterior maxilla in growing children.

METHODS

A total of 169 Korean children aged 10-13 years old were included in this retrospective study. Demographic data and cone-beam computed tomography scans of 244 maxillary central incisors were collected. For each tooth, the alveolar ridge thickness was determined at 1-, 3-, and 5-mm levels below the cemento-enamel junction. The alveolar process height and labial concavity were also evaluated. Statistical analyses were performed to evaluate differences according to age and sex.

RESULTS

The alveolar ridge thickness did not differ according to age. The alveolar ridge thickness in males was significantly greater than that in females among those aged 10 and 11 years. The average alveolar process height was 17.43 ± 2.22 mm. The alveolar process height hardly changed with age from 10-13 years, whereas the alveolar process height of males was significantly greater compared with that of females among those aged 10 years. The labial concavity was approximately 150˚, with no significant differences between age and sex.

CONCLUSIONS

Within the limits of this study, the anatomy of the alveolar ridge in the maxillary central incisors showed sufficient capacity as a recipient site for autotransplantation using mandibular premolars, especially in males. These findings serve as a valuable resource for facilitating autotransplantation in children.

Tooth intentional replantation from 1964 to 2023: A bibliometric analysis

BACKGROUND/AIM

There is no thorough overview of intentional tooth replantation techniques. We performed a bibliometric analysis of the development of intentional tooth replantation.

MATERIALS AND METHODS

A comprehensive search of the Web of Science and SCOPUS databases was conducted in February 2023. Original articles and reviews of human studies with "intentional replantation" or synonyms in the titles, abstracts, or keywords were included. A descriptive analysis of bibliographic data, co-occurrence analysis, and coupling of publications was performed. Multivariate analysis was used to explore the bibliometric parameters associated with the citation counts.

RESULTS

The study included 171 papers, which were co-authored by 500 individuals affiliated with 217 institutions from 28 countries/regions. The USA contributed the greatest number of publications, followed by China, and Japan. The USA had 694 citations, followed by Japan (210), and Turkey (210). The Journal of Endodontics and Dental Traumatology contributed the most citations. Five directions for future research were identified based on the coupling relationships of publications, including "managing vertical root fractures with adhesive resin using the intentional replantation technique," "intentional replantation for periodontally hopeless or endodontically compromised teeth," "intentional replantation for treating abnormalities of morphological development," "outcomes and prognosis factors of intentional replantation," and "treating root replacement resorption by intentional replantation." Multivariate analysis showed that the publication year, Journal Citation Reports ranking of journals, study design, and disease type were predictors of citation counts.

CONCLUSIONS

This bibliometric analysis provides a comprehensive description of the intentional replantation technique. The USA published the greatest volume of papers and generated the most citations. The Journal of Endodontics and Dental Traumatology are considered the most influential. The Journal Citation Reports journal ranking (Q1, Q2), study design (case reports, cohort studies), and disease type (crown root fractures) were associated with the citation counts.

Structurally compromised teeth. Part II: A novel approach to peripheral build up procedures

OBJECTIVE

To introduce the "Peripheral Build-Up technique - PBUt" as a foundation restoration strategy for structurally compromised teeth (SCT).

CLINICAL CONSIDERATIONS

Several strategies have been proposed over time (cervical marginal relocation, doughnut, and preformed ring techniques) to enable the management of restorative procedures in challenging situations such as the presence of deep subgingival defects. The PBUt is a versatile, completely additive direct technique that share some strategical concepts with these techniques to approach critical clinical situations while supplying a wider field of application thanks to distinct operative expedients. The clamp insertion modality, the extension of the proximal wall and the matrix customization/stabilization strategies adopted in PBUt endorse the possibility to manage the most apical and peripheral border of the residual tooth structure when located up to >1.5 mm above the bone crest. The periodontal response has to be then monitored over time. Moreover, thanks to the peripheral and apically-extended addictive approach, it allows a massive preservation of residual sound tooth structure and improves the resistance and retentive physical/geometrical features of the abutment tooth. The PBUt operative workflow is herein explained.

CLINICAL SIGNIFICANCE

The Peripheral-Build-Up technique (PBUt) advocates some innovative clinical restorative steps for the management of SCT with coronal and deep subgingival defects.

Effectiveness evaluation of autotransplanted teeth after performing extraoral endodontic surgery instead of conventional root canal therapy

PURPOSE

The aim of this study was to examine the viability and efficacy of utilizing extraoral apicoectomy and retrograde filling in combination to seal the root canal system of mature molars without the need for root canal therapy (RCT) during the autotransplantation of teeth (ATT).

MATERIALS AND METHODS

This study screened 27 patients who received ATT at the Department of Oral Surgery in the Hospital of Stomatology from 2019 to 2021. Extraoral apicoectomy and retrograde filling were performed, while RCT was temporarily not performed. The study analysed the periodontal status and masticatory function of transplanted teeth one to three years postoperation and used cone-beam computed tomography (CBCT) and periapical radiograph (PA) to evaluate the integrity of the periodontal space and intra/periapical inflammation. The potential predictors of survival/success were analysed statistically. We also conducted questionnaires and chewing efficiency tests.

RESULTS

In this study, 27 TTs from 27 patients were found to be fully functional in terms of chewing ability. The overall survival rate was 100% (27/27), and the success rate was 70.4% (19/27). A total of 90.9% (20/22) of patients reported being satisfied or very satisfied with their TTs. Additionally, the chewing efficiency of the transplantation side was on average 82.0% of that of the healthy side, with a significant difference between the two sides (P < 0.05). None of the potential predictors were found to significantly affect the success or survival of the transplanted tooth (TT).

CONCLUSION

The combination of extraoral apicoectomy and retrograde filling in TT showed promising outcomes, but further clinical cases and longer follow-up times are still required to validate the treatment plan.

Clinical applications and outcomes of the surgical tooth extrusion technique: A bibliometric analysis from 1982 to 2023

STATEMENT OF PROBLEM

The surgical extrusion technique has been advocated for severely damaged teeth as well as for intruded and unerupted teeth. However, a quantitative literature analysis is lacking.

PURPOSE

The purpose of this bibliometric analysis was to provide a comprehensive overview of surgical extrusion, assess the applications and outcomes, and evaluate topics for future research.

MATERIAL AND METHODS

An electronic search was conducted in leading databases in April 2023. Human studies with surgical tooth extrusion or synonyms in titles or abstracts were included. A bibliographic analysis, co-occurrence analysis, and coupling of publications were performed. The analysis of variance was used to assess the characteristics of the subgroups based on indications. The survival rate was evaluated by using the Kaplan-Meier method in the R software program (α=.05).

RESULTS

Fifty-one studies from 1982 to 2023 were included. The Journal of Dental Traumatology and the Journal of Prosthetic Dentistry combined published approximately one-third of the papers and acquired the most citations. The burst detection of keywords revealed 4 popular research topics: the Benex extraction system, chlorhexidine for infection control, rigid or semi-rigid splints to decrease the risk of complications, and novel restorative materials to improve esthetics. An overall survival rate of 96.36% was reported among 316 participants with 330 extruded teeth. No significant differences were found in study types, geographic distribution, year of publication, or citation counts among the 4 subgroups (surgical extrusion for subgingival fractures, extensive caries, intruded teeth, and unerupted teeth). A significant difference was observed among the Kaplan-Meier curves of the 4 subgroups (P=.030).

CONCLUSIONS

Surgical extrusion may be used to save otherwise nonrestorable teeth, and the procedure has shown promising survival rates when teeth are properly selected and the procedure is well executed. Subgingival fractures and extensive caries near bone level are the predominant indications, as well as intruded and unerupted teeth. Surgical extrusion is a reliable treatment option to facilitate tooth restoration for severely damaged teeth, especially for maxillary anterior teeth.

Accuracy of CAD-CAM surgically guided tooth autotransplantation using guided templates and custom-designed osteotomes in human cadaver mandibles

INTRODUCTION

A major challenge in dentistry is the replacement of teeth lost prematurely due to trauma, caries, or malformations, especially in growing patients. The aim of this study was to assess the accuracy of CAD-CAM surgically guided tooth autotransplantation in cryopreserved cadaver mandibles using guided templates and custom-designed osteotomes.

METHODS

Cryopreserved human cadaver heads were digitized and scanned using an intraoral optical scanner and a large-volume cone beam computed tomography (CBCT) device. First, virtual surgical planning was performed to create a 3D tooth replica, two surgical guides, and a custom-made osteotome for each single-rooted tooth autotransplantation procedure/case. Surgical sockets were created in the selected mandibles using guided tooling consisting of an initial guided osteotomy with implant burs and a final guided osteotomy using custom osteotomes. After tooth autotransplantation, second large-volume CBCT images of the five cadaver mandibles were obtained. The discrepancy in mm within the 3D space (apical and mesiodistal deviations) between the final position of the autotransplanted teeth and their digitally planned 3D initial position was calculated and analyzed statistically (P< .05).

RESULTS

All donor teeth were placed without incident within their newly created sockets in the real mandibles. The mean difference between the digitally planned root apex position and the final tooth position was 2.46±1.25mm. The mesiodistal deviation of the autotransplanted teeth was 1.63±0.96mm.

CONCLUSIONS

The autotransplantation of single-rooted teeth with custom-designed and 3D-printed surgical tooling provided promising results. The technique was able to create surgically prepared sockets that could accommodate transplanted teeth in mandibles.

Current Trends in Intentional Replantation Treatment Among Endodontists and Postgraduate Students in India, the United States of America, and the United Kingdom: A Cross-Sectional Study

Objective This study aimed to investigate the knowledge, attitude, and practices (KAP) of intentional replantation among postgraduate students and endodontists in India, the United States of America, and the United Kingdom. Materials and methods The sample size was estimated using G*Power. Based on the pilot study done before with 60 participants, a sample size of 928 was obtained. The survey consisted of 22 questions, which were finalized after content validation by two endodontic experts. It was circulated through multiple online social platforms such as Instagram, Facebook, WhatsApp, and other online dental communities/channels. The respondents were questioned about the case selection, extraction methods, antibiotic therapy, patient acceptance level, operator preference, prognostic indicator, and various other steps in the intentional replantation treatment modality. The data for this KAP survey were organized in an Excel sheet, and statistical analysis was done using the Chi-squared test. Analysis of descriptive and inferential statistics was conducted using SPSS version 20.0 (IBM Inc., Armonk, New York). A p-value of <0.05 was considered significant. Results A strong statistical difference was found in the KAP of the practitioners in different countries. The vast majority (72.7%) considered intentional replantation as an adjunct treatment modality rather than a last resort. A total of 76.5% of the respondents preferred replantation of the tooth into the socket within 15 minutes, and 86.4% of the participants regarded replantation as the most cost-effective treatment modality. Ultrasonics (76.8%) was most commonly chosen for retrograde preparation, and Biodentine (60.1%; Septodont, Saint-Maur-des-Fossés, France) as root-end filling material. Conclusion It can be concluded that a broad majority of practitioners in different countries view intentional replantation as an adjunct treatment modality rather than a last resort. Thus, intentional replantation seems to be a promising option for preserving the natural dentition of teeth with high survival rates and better outcomes.

Effects of cryopreservation on the biomechanical properties of dentin in cryopreserved teeth: An in-vitro study

This study focused on the biomechanical properties and microstructural changes in dentin of teeth in different age groups after cryopreserved for different durations. Ninety third molars from three age groups (youth group, middle-age group, and elderly group), were collected and randomly divided into three groups according to freezing time at -196 °C (7 days, 30 days, and 90 days). Control group was shored at ordinary temperature. After rewarming, the compressive strength and elastic modulus of the dentin were measured with an electronic universal tester. Scanning electron microscopy was used to evaluate the microstructure of dentin after cryopreservation. After cryopreservation, the compressive strength of the teeth in each experimental group was not significantly different from control group. With the increase of freezing time and age, dentin's elastic modulus showed a decreasing trend. There were statistically significances between the control group and freezing 90d group, freezing 7d and 90d group, youth and middle-aged group, youth and elderly group (P < 0.05). Both freezing time and age factors were significant for the elastic modulus of dentin(P＜0.05). There was no interaction effect for age and freezing time. In transverse sections of scanning electron microscopy, the dentinal tubule became narrower, partially occluded, and more easily adhered to impurities in the long freezing time and elderly group. In longitudinal sections, with freezing time and age, the inner wall of the dentinal tubules became rough especially in the aged group cryopreserved for 90 days. No significant microcracks exited in any of the longitudinal sections of dentin.

A Mechanically Reinforced Super Bone Glue Makes a Leap in Hard Tissue Strong Adhesion and Augmented Bone Regeneration

Existing bone tissue engineering strategies aim to achieve minimize surgical trauma, stabilize the injured area, and establish a dynamic osteogenic microenvironment. The cutting-edge bone glue developed in this study satisfies these criteria. Inspired by the excellent adhesive properties of mussels, herein, a super osteogenic glue (L-DPZ) that integrates poly(vinyl alcohol), L-dopa amino acid, and zeolitic imidazolate framework-8 characterized by catechol-metal coordination is used to successfully adhere to hard tissue with a maximum adhesive strength of 10 MPa, which is much higher than those of commercial and previously reported bone glues. The stable hard tissue adhesion also enables it to adhere strongly to luxated or broken teeth, Bio-Oss (a typical bone graft material), and splice fragments from comminuted fractures of the rabbit femur. Then, it is testified that the L-DPZ hydrogels exhibit satisfactory biocompatibility, stable degradability, and osteogenic ability in vitro. Moreover, the ability to anchor Bio-Oss and sustained osteogenesis of L-DPZ result in satisfactory healing in calvarial bone defect models in rabbits, as observed by increased bone thickness and the ingrowth of new bone tissue. These results are expected to demonstrate solutions to clinical dilemmas such as comminuted bone fracture fixation, bone defect reconstruction, and teeth dislocation replantation.

Tooth autotransplantation gives teeth a second chance at life: A case series

Traditional transplantation, surgical extrusion and intentional replantation procedures are important treatment options that clinicians may consider performing in their daily clinical practice. There should be a well-constructed treatment plan for teeth with problems. In this paper, we present a series of case reports on three treatment methods used in autologous tooth transplantation and a literature review on the prevention of postoperative complications and the advantages of autologous tooth transplantation compared to dental implantation. The purpose of this study was to improve the understanding of autologous tooth transplantation.

Tooth auto-transplantation: A bibliometric analysis of the top 100 most-cited articles

BACKGROUND/AIM

Tooth auto-transplantation has recently gained high clinical acceptance. The aim of this study was to identify the top 100 most-cited articles regarding tooth auto-transplantation, to analyse multiple citations and publication metrics and to outline the historical scientific advancements in this field.

MATERIALS AND METHODS

An advanced search of the Clarivate Analytics' Web of Science 'Core Collection' and Elsevier's Scopus databases utilising specific keywords related to tooth auto-transplantation between 1971 and 2021 was performed. The retrieved articles were ranked in descending order based on their Web of Science citation counts and further cross-matched with citation data from Scopus. The extracted data included citation counts, citation density, level of evidence, year of publication, contributing authors names and institutes, corresponding author's address, journal of publication, journal local citations index, cumulative growth index, keywords and keywords Plus. Data analysis was performed using descriptive statistics and graphical mapping.

RESULTS

A total of 1290 articles were retrieved. The top 100 most-cited articles received a total of 4899 (Web of Science) and 5250 (Scopus) citations. Among these, cohort studies (29%) and case series (18%) were the most common study designs. Scandinavian countries produced major contributions in defining the top 100 most-cited articles and ranked within the top 5 countries based on the number of publications and citations per year. The greatest contributing authors were Schwartz O (n = 12), Andreasen JO (n = 8) and Paulsen HU (n = 6), and they were affiliated with Copenhagen, Denmark. The top contributing journals were American Journal of Orthodontics and Dentofacial Orthopedics, International Journal of Oral and Maxillofacial Surgery, Oral Surgery Oral Medicine Oral Pathology Oral Radiology, European Journal of Orthodontics, Dental Traumatology and Journal of Oral and Maxillofacial Surgery.

CONCLUSION

This bibliometric analysis revealed a large geographical scientific interest and broad development in the field of tooth auto-transplantation spanning multiple dental disciplines.

Deep margin elevation-Present status and future directions

OBJECTIVE

Deep margin elevation (DME) is a treatment approach to relocate the cervical margin of teeth with subgingival defects to a supragingival position with a direct restoration to facilitate rubber dam isolation, impression taking, and bonding of indirect restorations. This article provides an overview of the current scientific evidence on DME and future directions for research.

OVERVIEW

The review included 38 studies on DME, most conducted in vitro. These studies indicate that DME has no detrimental effect on the fracture resistance of restored teeth. Evidence on the impact of DME on marginal quality is conflicting, but most in vitro studies observed no negative effect. Clinical studies, most comprising small patient cohorts, demonstrated favorable restorative outcomes and suggest that DME restorations made with scrupulous care are compatible with periodontal health. Bleeding on probing may occur more frequently at sites with DME, though evidence on this is not unequivocal.

CONCLUSIONS

Current evidence, based largely on laboratory studies and limited clinical data, supports DME as a viable approach to restore teeth with localized subgingival defects. However, further clinical studies with long-term follow-ups are required to provide corroborative evidence.

CLINICAL SIGNIFICANCE

Current evidence suggests that DME is a viable approach to restore teeth with localized subgingival defects as a possible alternative to surgical crown lengthening. Proper working field isolation, meticulous care in the bonding and buildup procedure, and biofilm removal through patient-performed oral hygiene and professional maintenance care are crucial. As scant clinical trial-based evidence is available today, further research is needed to evaluate the long-term performance of DME restorations and their impact on periodontal health.

Assessment of Bone Height Changes Based on the Cone-Beam Computed Tomography Following Intentional Replantation for Periodontally Compromised Teeth

Background and Objectives; This study aimed to evaluate the clinical outcomes and bone changes before and after intentional replantation (IR) for periodontally compromised teeth by using cone-beam computed tomography (CBCT). Materials and Methods; Fourteen periodontally involved teeth were selected for IR. A preoperative orthodontic procedure was performed to apply luxation, and the tooth was then gently extracted. Retrograde filling of the root-end canal was performed. Once the tooth was repositioned in the socket, it was splinted with the adjacent tooth. After three months, prosthetic restoration was performed. Results; Clinical parameters and CBCT images were obtained before and after the IR procedure. The height of the alveolar bone was measured on the CBCT images by using software. Most preoperative symptoms, including pain, mobility, probing depth (PD) and bleeding on probing (BOP), significantly decreased after IR (pain: 4.71 to 1.00; mobility: 1.36 to 0.29; PD: 5.60 to 2.85; BOP: 3.50 to 0.79). CBCT analysis indicated an increase in bone height after IR (the amount of change: maxilla, 4.00; mandible, 1.95). Conclusions; A previous study reported that IR for periodontally involved teeth is quite limited. However, in this study, IR of periodontally compromised teeth showed favorable results in clinical and radiographic evaluations, suggesting that IR may be an alternative to extraction of teeth with periodontal disease.

A Novel Technique for Preparation of Recipient Site and Autologous Bone Grafting in Autotransplantation of Single-Rooted Teeth: A Report of Two Cases

Low-speed drilling without irrigation has a long history of use in implant dentistry. It provides the advantage of avoiding the wash-out of proteins and biomolecules from the bone. In this case report, we describe the novel use of this drilling protocol in the preparation of bone alveolus during the procedure of tooth autotransplantation. Two cases with early tooth loss in the upper maxillary arch were treated by the autotransplantation of permanent teeth with immature root development and the use of plasma rich in growth factors. Autologous bone fragments (from drilling) were harvested and used for alveolar bone augmentation. The follow-up time was three and seven years since tooth autotransplantation. All the autotransplanted teeth achieved a closed apex with no signs of loss of vitality. Low-speed drilling without irrigation did not jeopardize the outcomes of tooth autotransplantation and warrants further investigation in the context of periodontal ligament healing.

Combined Application of Virtual Simulation Technology and 3-Dimensional-Printed Computer-Aided Rapid Prototyping in Autotransplantation of a Mature Third Molar

The use of computer-aided rapid prototyping (CARP) models was considered to reduce surgical trauma and improve outcomes when autotransplantation of teeth (ATT) became a viable alternative for dental rehabilitation. However, ATT is considered technique-sensitive due to its series of complicated surgical procedures and unfavorable outcomes in complex cases. This study reported a novel autotransplantation technique of a 28-year-old patient with an unrestorable lower first molar (#36) with double roots. Regardless of a large shape deviation, a lower third molar (#38) with a completely single root formation was used as the donor tooth. ATT was performed with a combined use of virtual simulation, CARP model-based rehearsed surgery, and tooth replica-guided surgery. A 3D virtual model of the donor and recipient site was generated from cone-beam computed tomographic (CBCT) radiographs prior to surgery for direct virtual superimposition simulation and CARP model fabrication. The virtual simulation indicated that it was necessary to retain cervical alveolar bone during the surgical socket preparation, and an intensive surgical rehearsal was performed on the CARP models. The donor tooth replica was used during the procedure to guide precise socket preparation and avoid periodontal ligament injury. Without an additional fitting trial and extra-alveolar storage, the donor tooth settled naturally into the recipient socket within 30 s. The transplanted tooth showed excellent stability and received routine root canal treatment three weeks post-surgery, and the one-year follow-up examination verified the PDL healing outcome and normal functioning. Patient was satisfied with the transplanted tooth. This cutting-edge technology combines virtual simulation, digital surgery planning, and guided surgery implementation to ensure predictable and minimally invasive therapy in complex cases.