Dynamic mechanical properties and fractal analysis of texturized soybean protein/wheat gluten composite produced by high moisture extrusion

Mulberry (Morus alba L.) leaf powder modified the processing of meat alternatives: Principal component analysis from apparent properties to chemical bonds

For texture control in plant-meat alternatives, the interrelationship between apparent characteristics and chemical bonds in high-fiber formulations remains unclear. The influence of mulberry leaf powder on apparent characteristics and chemical bonds of raw materials, block and strip products at addition amounts of 0.5-25% was analyzed. The results showed that 8% addition significantly increased the chewiness of the block by 98.12%. The strips' texture shows a downward trend, and the processing produced more redness and color difference. Additives promoted the formation of voids, lamellar and filamentous structures, and the strip produced more striped structures. Disulfide bonds significantly increased in the block, and the β-turn in the secondary structure enhanced by 12.20%. The β-turn transformed into a β-sheet in strips. Principal component analysis revealed that the texture improvement was associated with producing disulfide bonds and β-turn, providing a basis for high-fiber components to improve products' apparent characteristics by chemical bonds.

High-Moisture Extrusion of Plant Proteins: Fundamentals of Texturization and Applications

The growing demand for sustainable and healthy food alternatives has led to a significant increase in interest in plant-based protein products. Among the various techniques used in creating meat analogs, high-moisture extrusion (HME) stands out as a promising technology for developing plant-based protein products that possess desirable texture and mouthfeel. During the extrusion process, plant proteins undergo a state transition, causing their rheological properties to change, thereby influencing the quality of the final extrudates. This review aims to delve into the fundamental aspects of texturizing plant proteins using HME, with a specific focus on the rheological behavior exhibited by these proteins throughout the process. Additionally, the review explores the future of HME from the perspective of novel raw materials and technologies. In summary, the objective of this review is to provide a comprehensive understanding of the potential of HME technology in the development of sustainable and nutritious plant-based protein products.

Plant-Based Meat Proteins: Processing, Nutrition Composition, and Future Prospects

The growing need for plant-based meat alternatives promotes the rapid progress of the food industry. Processing methods employed in plant-based meat production are critical to preserving and enhancing their nutritional content and health benefits, directly impacting consumer acceptance. Unlike animal-based food processing, the efficiency of protein extraction and processing methods plays a crucial role in preserving and enriching the nutritional content and properties. To better understand the factors and mechanisms affecting nutrient composition during plant-based meat processing and identify key processing steps and control points, this work describes methods for extracting proteins from plants and processing techniques for plant-based products. We investigate the role of nutrients and changes in the nutrients during plant protein product processing. This article discusses current challenges and prospects.

Effect of Process Variables and Ingredients on Controlled Protein Network Creation in High-Moisture Plant-Based Meat Alternatives

The market has observed a rapid increase in the demand for plant-based foods as an alternative to animal meat products. Technologies such as high-moisture extrusion (HME) have the potential to develop anisotropic structures using alternative protein ingredients. This article discusses the different possible mechanisms responsible for structure formation and the effect of extrusion process parameters and outlines the recent advances in the long cooling dies (LCDs) used for meat alternative development. The role of different protein ingredients and the impact of combining them with other biopolymers were also evaluated. The underlying mechanism behind anisotropic structure formation during HME is a synergistic effect, with substantial dependence on the source of ingredients and their processing background. Formulation including proteins derived from plants, insects, animals, and microalgae with other biopolymers could pave the way to develop structured meat alternatives and fill nutritional interstices. Dynamic or rotating annular gap cooling dies operating at freely controllable shear and static annular gap dies are recent developments and assist to produce layered or fibrous structures. The complex chemical sites created during the HME of plant protein favour flavour and colour retention. This paper summarises the recent information published in the scientific literature and patents, which could further help researchers to fill the present knowledge gaps.

Hypotheses concerning structuring of extruded meat analogs

In this paper, we review the physicochemical phenomena occurring during the structuring processes in the manufacturing of plant-based meat analogs via high-moisture-extrusion (HME). After the initial discussion on the input materials, we discuss the hypotheses behind the physics of the functional tasks that can be defined for HME. For these hypotheses, we have taken a broader view than only the scientific literature on plant-based meat analogs but incorporated also literature from soft matter physics and patent literature. Many of these hypotheses remain to be proven. Hence, we hope that this overview will inspire researchers to fill the still-open knowledge gaps concerning the multiscale structure of meat analogs.

Effect of Wheat Gluten and Peanut Protein Ratio on the Moisture Distribution and Textural Quality of High-Moisture Extruded Meat Analogs from an Extruder Response Perspective

Wheat gluten (WG) and peanut protein powder (PPP) mixtures were extruded at high moisture to investigate the potential application of this mixture in meat analog production. Multiple factors, including the water absorption index (WAI), water solubility index (WSI), rheological properties of the mixed raw materials, die pressure, torque and specific mechanical energy (SME) during high moisture extrusion, texture properties, color, water distribution, and water activity of extrudates were analyzed to determine the relationships among the raw material characteristics, extruder response parameters, and extrudate quality. At a WG ratio of 50%, the extrudates have the lowest hardness (2.76 kg), the highest springiness (0.95), and a fibrous degree of up to 1.75. The addition of WG caused a significant rightward shift in the relaxation time of hydrogen protons in the extrudates, representing increased water mobility and water activity. A ratio of 50:50 gave the smallest total color difference (ΔE) (about 18.12). When the added amount of WG was 50% or less, it improved the lightness and reduced the ΔE compared to >50% WG. Therefore, clarifying the relationship among raw material characteristics, extruder response parameters, and extruded product quality is helpful in the systematic understanding and regulation of the fiber textural process of binary protein meat analogs.

High-Moisture Shear Processes: Molecular Changes of Wheat Gluten and Potential Plant-Based Proteins for Its Replacement

Nowadays, a growing offering of plant-based meat alternatives is available in the food market. Technologically, these products are produced through high-moisture shear technology. Process settings and material composition have a significant impact on the physicochemical characteristics of the final products. Throughout the process, the unfolded protein chains may be reduced, or associate in larger structures, creating rearrangement and cross-linking during the cooling stage. Generally, soy and pea proteins are the most used ingredients in plant-based meat analogues. Nevertheless, these proteins have shown poorer results with respect to the typical fibrousness and juiciness found in real meat. To address this limitation, wheat gluten is often incorporated into the formulations. This literature review highlights the key role of wheat gluten in creating products with higher anisotropy. The generation of new disulfide bonds after the addition of wheat gluten is critical to achieve the sought-after fibrous texture, whereas its incompatibility with the other protein phase present in the system is critical for the structuring process. However, allergenicity problems related to wheat gluten require alternatives, hence an evaluation of underutilized plant-based proteins has been carried out to identify those that potentially can imitate wheat gluten behavior during high-moisture shear processing.

The texture of plant protein-based meat analogs by high moisture extrusion: A review

Meat analogs produced by high moisture extrusion (HME) are considered to be one of the products that have great potential for replacing real meat. The key issue as a meat analog is whether the texture can meet the standards of real meat. Nowadays, there have been some advances in the textural characterization of meat analogs, which are discussed in detail in this review. Firstly, this review describes the current characterizations of meat analogs in terms of fiber structure, hardness, springiness, tensile resistant force and sensory evaluation. Then, methods for analyzing the texture of meat analogs, such as texture analyzer, microstructure-based methods and other methods for characterizing fiber structure, are summarized. In addition, these characterizations are discussed in relation to the factors that influence the texture of meat analogs during HME. Finally, we propose priorities and some promising methods for future meat analogs conformation studies.

Blending Proteins in High Moisture Extrusion to Design Meat Analogues: Rheological Properties, Morphology Development and Product Properties

High moisture extrusion (HME) of meat analogues is often performed with raw materials containing multiple components, e.g., blends of different protein-rich raw materials. For instance, blends of soy protein isolate (SPI) and another component, such as wheat gluten, are used particularly frequently. The positive effect of blending on product texture is well known but not yet well understood. Therefore, this work targets investigating the influence of blending in HME at a mechanistic level. For this, SPI and a model protein, whey protein concentrate (WPC), were blended at three different ratios (100:0, 85:15, 70:30) and extruded at typical HME conditions (55% water content, 115/125/133 °C material temperature). Process conditions, rheological properties, morphology development, product structure and product texture were analysed. With increasing WPC percentage, the anisotropic structures became more pronounced and the anisotropy index (AI) higher. The achieved AI from the extrudates with a ratio of 70:30 (SPI:WPC) were considerably higher than comparable extrudates reported in other studies. In all extrudates, a multiphase system was visible whose morphology had changed due to the WPC addition. The WPC led to the formation of a much smaller dispersed phase compared to the overlying multiphase structure, the size of which depends on the thermomechanical stresses. These findings demonstrate that targeted mixing of protein-rich raw materials could be a promising method to tailor the texture of extruded meat analogues.

Extrusion texturization of cricket flour and soy protein isolate: Influence of insect content, extrusion temperature, and moisture-level variation on textural properties

Due to the increasing global population and unsustainable meat production, the future supply of animal-derived protein is predicted to be insufficient. Currently, edible insects are considered as a potential and "novel" source of protein in the development of palatable meat analogues. This research used high moisture extrusion cooking (HMEC), at a screw speed of 150 rpm, to produce meat analogues using full- or low-fat cricket flours (CF) and soy protein isolate (SPI). Effects of water flow rate (WFR), cooking temperature (9 and 10 ml/min; 120, 140, and 160°C, respectively), and CF inclusions levels of 0, 15, 30, and 45% were analyzed. Cooking temperature and CF inclusion had a significant effect (p < .05) on both tensile stress in parallel and perpendicular directions, while WFR had no significant effect (p = .3357 and 0.7700), respectively. The tensile stress increased with temperature but decreased with CF inclusion at both WFRs. Comparatively, the tensile stress was stronger at WFR of 9 ml/min than at 10 ml/min; however, the tensile stress in parallel was mostly greater than tensile stress in perpendicular directions. Fibrous meat analogues with high anisotropic indices (AIs) of up to 2.80 were obtained, particularly at WFR of 10 ml/min and at inclusions of 30% low-fat CF. By controlling HMEC conditions, full-/low-fat cricket flours at 15% and 30% inclusions can offer an opportunity to partially substitute SPI in manufacturing of fibrous meat analogues.

Fractal dimension of antibody-PEG precipitate: Light microscopy for the reconstruction of 3D precipitate structures

Protein and in particular antibody precipitation by PEG is a cost-effective alternative for the first capture step. The 3D structure of precipitates has a large impact on the process parameters for the recovery and dissolution, but current technologies for determination of precipitate structures are either very time consuming (cryo-TEM) or only generate an average fractal dimension (light scattering). We developed a light microscopy based reconstruction of 3D structures of individual particles with a resolution of 0.1-0.2 µm and used this method to characterize particle populations generated by batch as well as continuous precipitation in different shear stress environments. The resulting precipitate structures show a broad distribution in terms of fractal dimension. While the average fractal dimension is significantly different for batch and continuous precipitation, the distribution is broad and samples overlap significantly. The precipitate flocs were monofractal from micro- to nanoscale showing a random but consistent nature of precipitate formation. We showed that the fractal dimension and 3D reconstruction is a valuable tool for characterization of protein precipitate processes. The current switch from batch to continuous manufacturing has to take the 3D structure and population of different protein precipitates into account in their design, engineering, and scale up.

Influence of Konjac Glucomannan and Frozen Storage on Rheological and Tensile Properties of Frozen Dough

The impact of various amounts of konjac glucomannan on the structural and physicochemical properties of gluten proteins/dough at different periods of frozen storage is evaluated in the present study. As frozen storage time was prolonged, the molecular weight and the free sulfhydryl content of gluten proteins and the tensile properties of frozen dough all decreased. The addition of konjac glucomannan reduced the variations in the structural and rheological properties of gluten proteins/dough. Frozen dough with 2.5% added konjac glucomannan showed the highest water binding capacity and retarded the migration of water. Scanning electron microscopy and differential scanning calorimetry results also revealed that adding konjac glucomannan reduced the cracks and holes in the dough and enhanced its thermal stability. The correlations between mechanical characteristics and structure parameters further indicated that konjac glucomannan could not only stabilize the structures of gluten proteins but also bind free water to form more stable complexes, thereby retaining the rheological and tensile properties of the frozen dough.