Development of high internal phase Pickering emulsions stabilised by ovotransferrin–gum arabic particles as curcumin delivery vehicles

Design of Novel Knot-like Structures Based on Ovotransferrin Fibril-Gum Arabic Complexes: Effective Strategies to Stabilize Pickering Emulsions

This work aimed to clarify the effects of gum arabic (GA) on the morphology and properties of ovotransferrin fibrils (OVTFs). By constructing OVTF-GA complexes and exploring the dispersion stability, turbidity and the ζ-potential of the complexes, the optimum mass ratio of OVTFs to GA and pH for complex formation were confirmed as being 1:1 and pH 4.6, respectively. The interaction between OVTFs and GA was determined to be predominantly driven by electrostatic attraction. The OVTF-GA complexes exhibited a knot-like structure when observed using atomic force microscopy. Then, OVTFs and OVTF-GA complexes were compared in terms of contact angle, surface hydrophobicity and dynamic interfacial tension. The combination of OVTFs and GA decreased the contact angle of OVTFs from 80.85° to 70.36°. In comparison with OVTFs, OVTF-GA complexes reduced the oil-water interfacial tension to a lower level (8.14 mN/m). Furthermore, the capacities of OVTF-GA complexes in stabilizing emulsions were explored. OVTF-GA complex-stabilized oleogel-based Pickering emulsion (OGPE) was constructed, and OVTF-stabilized oleogel-based Pickering emulsion (OPE) was used as the control. OGPE had a higher emulsified phase volume fraction (EPVF) and stability index (SI). The EPVF of OGPE was 100.0% and 99.4% before and after one-month storage, respectively, compared with 98.3% and 95.7% of OPE. This work can provide some useful references for the design of biopolymers with novel structures composed of protein fibrils and polysaccharides, which may also help to construct and apply protein fibril-polysaccharide complexes under specific needs.

Preparation and characterization of Pickering emulsion with directionally embedded antimicrobial peptide MOp2 and its preservation effect on grass carp

The peptide MOp2 obtained from Moringa oleifera seeds showed good antimicrobial activity. However, the stability of its activity has not yet been studied. In the present study, MOp2-loaded thiolated chitosan-stabilized (CMOp2) Pickering emulsion was prepared and applied to prolong the shelf life of grass carp. The encapsulation rate of MOp2 was 57.7% in CMOp2. In addition, the effects of different concentrations of CMOp2 solid particles and pH on droplet size, zeta optional and storage stability of Pickering emulsions were evaluated; the best condition for preparing Pickering emulsion through experiment was 1.75% CMOp2 solid particles at pH 9.5. Moreover, morphological observations and rheological analysis indicated that Pickering emulsions were considered a water-in-oil emulsion with typical non-Newtonian fluid characteristics. Furthermore, the prepared Pickering emulsion could significantly inhibit the growth of Escherichia coli and Staphylococcus aureus. Besides, Pickering emulsion effectively prevented spoilage of grass carp, and the Pickering emulsion-treated group reduced its pH, TVB-N and color values, inhibited microbial growth, and extended shelf life to 9 day at the storage of 4 °C. Overall, the present findings provide a reference for the application of MOp2-loaded Pickering emulsions in food preservation.

High internal phase emulsions stabilized by alkaline-extracted walnut protein isolates and their application in food 3D printing

Alkaline-extracted walnut protein isolates showed relatively poor solubility and emulsifying properties in many previous studies. However, whether they can be used as potential emulsifiers to stabilize high internal phase emulsions (HIPEs) remains unknown. Herein, walnut protein isolates were prepared by alkaline extraction from walnut kernels with or without pellicles (named PAWPI and AWPI, respectively). PAWPI conjugated with pellicle polyphenols showed improved solubility and higher antioxidant capacity than AWPI. HIPEs were fabricated via a one-step method using AWPI or PAWPI as the sole protein emulsifier. HIPEs (oil fraction of 0.8, with 0.1% β-carotene) could be stabilized by PAWPI at a relatively low concentration of 0.2% (w/v), while at least 1% (w/v) AWPI was required to effectively stabilize HIPEs. HIPEs stabilized by PAWPI had smaller oil droplet sizes than those stabilized by AWPI. Rheological analysis indicated that PAWPI-stabilized HIPEs showed higher viscosity and better viscoelasticity than AWPI-stabilized HIPEs. Large-amplitude oscillation shearing analysis suggested that PAWPI-stabilized HIPEs were stiffer but more brittle than AWPI-stabilized HIPEs. Moreover, both PAWPI- and AWPI-stabilized HIPEs exhibited good storage stability and were relatively stable against heat treatment and ionic strength. PAWPI-stabilized HIPEs showed a higher protective capacity for encapsulated β-carotene than AWPI-stabilized HIPEs. In addition, PAWPI-stabilized HIPEs showed good 3D printability and could be used as a promising edible ink.

Interfacial adsorption behavior of the Aspergillus oryzae lipase-chitosan complex and stability evaluation of the resultant Pickering emulsion

To prompt the application of the chitosan (CS)-Aspergillus oryzae lipase (AOL) complex in the construction of novel biphasic catalysis medium, its Pickering emulsion stabilization ability as well as adsorption behavior in the oil-water interface were investigated and the stability of resultant emulsion was evaluated. The results indicated that the CS-AOL complex assembled in mass ratio 1:5 was an effective Pickering stabilizer and up to 90 % AOL could be retained in the emulsion interface. Quartz crystal microbalance with dissipation monitoring suggested that the CS-AOL complex spontaneously absorbed to oil-water interface; absorption dynamics analysis revealed that the adsorption was driven by diffusion accompanied by rapid structural rearrangement; while interfacial dilatational rheology demonstrated the formation of an elastic film in the oil-water interface. The Pickering emulsions were pseudoplastic and that in oil fraction 0.6 exhibited the elastic behavior in contrast to the viscous behavior in oil fractions 0.2 and 0.4. The Pickering emulsion exhibited excellent stability against storage for up to 28 d, pHs 2.0-12.0, heating at 25-90 °C, and up to 500 mmol/L NaCl, and the corresponding interfacial AOL retentions exceeded 80 % during exposure to these conditions. Hence, the CS-AOL complex could be used as a stabilizer to construct Pickering emulsion-based biphasic catalysis systems.

Biopolymer-based pickering high internal phase emulsions: Intrinsic composition of matrix components, fundamental characteristics and perspective

Pickering HIPEs have received tremendous attention in recent years due to their superior stability and unique solid-like and rheological properties. Biopolymer-based colloidal particles derived from proteins, polysaccharides and polyphenols have been demonstrated to be safety stabilizers for the construction of Pickering HIPEs, which can meet the demands of consumers for "all-natural" products and provide "clean-label" foods. Furthermore, the functionality of these biopolymers can be further extended by forming composite, conjugated and multi-component colloidal particles, which can be used to modulate the properties of the interfacial layer, thereby adjusting the performance and stability of Pickering HIPEs. In this review, the factors affecting the interfacial behavior and adsorption characteristics of colloidal particles are discussed. The intrinsic composition of matrix components and fundamental characteristics of Pickering HIPEs are emphatically summarized, and the emerging applications of Pickering HIPEs in the food industry are reviewed. Inspired by these findings, future perspectives concerning this field are also put forward, including (1) the exploration of the interactions between biopolymers used to produce Pickering HIPEs and target food ingredients, and the influence of the added biopolymers on the flavor and mouthfeel of the products, (2) the investigation of the digestion properties of Pickering HIPEs under oral administration, and (3) the fabrication of stimulus-responsive or transparent Pickering HIPEs. This review will give a reference for exploring more natural biopolymers for Pickering HIPEs application development.

Protein-Based High Internal Phase Pickering Emulsions: A Review of Their Fabrication, Composition and Future Perspectives in the Food Industry

Protein-based high internal phase Pickering emulsions (HIPEs) are emulsions using protein particles as a stabilizer in which the volume fraction of the dispersed phase exceeds 74%. Stabilizers are irreversibly adsorbed at the interface of the oil phase and water phase to maintain the droplet structure. Protein-based HIPEs have shown great potential for a variety of fields, including foods, due to the wide range of materials, simple preparation, and good biocompatibility. This review introduces the preparation routes of protein-based HIPEs and summarizes and classifies the preparation methods of protein stabilizers according to their formation mechanism. Further outlined are the types and properties of protein stabilizers used in the present studies, the composition of the oil phase, the encapsulating substances, and the properties of the constituted protein-based HIPEs. Finally, future development of protein-based HIPEs was explored, such as the development of protein-based stabilizers, the improvement of emulsification technology, and the quality control of stabilizers and protein-based HIPEs.

Preparation of powdered oil by spray drying the Pickering emulsion stabilized by ovalbumin - Gum Arabic polyelectrolyte complex

The suitability of the perilla seed oil Pickering emulsion stabilized by the ovalbumin (OVA) - gum Arabic (GA) polyelectrolyte complex for spray drying was investigated and the resultant powder was characterized. The OVA - GA complex conferred enhanced stability to the emulsion than OVA, GA, and their mixture. The viscosity of the Pickering emulsion was highly sensitive to stabilizer concentration and that fabricated by 2% OVA - GA complex showed acceptable viscosity and powder yield. The Pickering emulsion was more effective in preventing oil leakage during spray drying than the OVA-stabilized emulsion and the resultant powder possessed an oil content of up to 77.7%. Besides, the spray-dried Pickering emulsion powder showed greater rehydration and better flowability than that of the OVA-stabilized emulsion powder. Hence, the Pickering emulsion stabilized by the OVA - GA polyelectrolyte complex is promising as a novel feed for the production of oil powders by spray drying.

Resveratrol-loaded α-lactalbumin-chitosan nanoparticle-encapsulated high internal phase Pickering emulsion for curcumin protection and its in vitro digestion profile

•

RES-ALA-CHI colloidal particles were fabricated as CUR-loaded HIPPEs stabilizers.

•

RES-ALA-CHI nanoparticle pronouncedly enhanced the chemical stability of CUR.

•

Lipolysis of HIPPEs can be controlled with RES-ALA-CHI colloidal particles.

•

CUR bioaccessibility can be controlled with RES-ALA-CHI colloidal particles.

The use of antioxidant-loaded protein-polysaccharide nanoparticle in stabilizing and delivering curcumin with high internal phase Pickering emulsions is comparatively scarce. Resveratrol (RES)-loaded α-lactalbumin (ALA)-chitosan (CHI) particles were fabricated and used for curcumin-loaded high internal phase Pickering emulsions (HIPPEs) stabilization and delivery. CLSM illustrated that RES-ALA-CHI nanoparticles were effectively adsorbed on oil/water (O/W) interface and a gel-like structure was formed surrounding oil droplets. All HIPPEs exhibited excellent physical stability. CUR retention was 75.4 % for HIPPEs with RES-ALA-CHI colloidal particles, which was appreciably higher than that with ALA-CHI colloidal particles (63.9 %) after 30 days storage. Compared to bulk medium-chain triglyceride (MCT), both lipolysis extent and curcumin (CUR) bioaccessibility were pronouncedly enhanced with HIPPEs-based delivery systems. But both HIPPEs (51.4 % and 43.7 %) exhibited lower extent of lipolysis than conventional emulsions (90.4 %). The occurrence of RES significantly restrained the lipolysis. These results demonstrated that HIPPEs could be excellent delivery systems for delivering lipophilic curcumin.

Egg white protein-based delivery system for bioactive substances: a review

Some bioactive substances in food have problems such as poor solubility, unstable chemical properties and low bioavailability, which limits their application in functional food. Recently, many egg white protein-based delivery carriers have been developed to improve the chemical stability, biological activity and bioavailability of bioactive substances. This article reviewed the structure and properties of several major egg white proteins commonly used to construct bioactive substance delivery systems. Several common carrier types based on egg white proteins, including hydrogels, emulsions, micro/nanoparticles, aerogels and electrospinning were then introduced. The biological functions of common bioactive substances, the limitations, and the role of egg white protein-based delivery systems were also discussed. At present, whole egg white protein, ovalbumin and lysozyme are most widely used in delivery systems, while ovotransferrin, ovomucoid and ovomucin are less developed and applied. Egg white protein-based nanoparticles are currently the most commonly used delivery carriers. Egg white protein-based hydrogels, emulsions, and microparticles are also widely used. Future research on the application of various egg white proteins in developed new delivery systems will provide more choices for the delivery of various bioactive substances.

3D printed MCT oleogel as a co-delivery carrier for curcumin and resveratrol

Designing a suitable matrix to protect sensitive bioactive compounds is an important stage in nutraceutical development. In this study, emulsion templated medium-chain triglycerides (MCT) oleogel was developed as co-delivery carriers for synergistic nutraceuticals, curcumin, and resveratrol and to 3D print in customized shapes for personalized nutrition. To obtain the stable emulsion, gelatin and gellan gum were added such that their protein-polysaccharide interaction helps in the structuring of the oil phase. Increasing the amount of gellan gum had a positive effect on stabilizing the emulsion but became the critical parameter during 3D printing. Hence, gellan gum of 1.5% (w/v) and gelatin at 10% (w/v) of water were considered optimum to produce a stable 30% O/W emulsion for 3D printing. Upon analyzing the in-vitro digestion behavior of the oleogel, it was observed that the bioactives were protected under oral and gastric conditions and allowed intestinal targeted delivery. The total bioaccessible fraction increased up to 1.13-fold and 1.2-fold for curcumin and resveratrol respectively compared to control (MCT oil). The FFAs release profile also indicated that gelators play an important role in lipase activity. Also, the ex-vivo everted gut sac analysis showed enhanced permeation of about 1.83 times and 1.13 times for curcumin and resveratrol respectively. Thus, this study provides useful insights into the 3D printing of emulsion templated oleogel as personalized nutraceutical carriers.

Pickering Emulsions: A Novel Tool for Cosmetic Formulators

The manufacturing of stable emulsion is a very important challenge for the cosmetic industry, which has motivated intense research activity for replacing conventional molecular stabilizers with colloidal particles. These allow minimizing the hazards and risks associated with the use of conventional molecular stabilizers, providing enhanced stability to the obtained dispersions. Therefore, particle-stabilized emulsions (Pickering emulsions) present many advantages with respect to conventional ones, and hence, their commercialization may open new avenues for cosmetic formulators. This makes further efforts to optimize the fabrication procedures of Pickering emulsions, as well as the development of their applicability in the fabrication of different cosmetic formulations, necessary. This review tries to provide an updated perspective that can help the cosmetic industry in the exploitation of Pickering emulsions as a tool for designing new cosmetic products, especially creams for topical applications.

Protein-polysaccharide interactions for the fabrication of bioactive-loaded nanocarriers: Chemical conjugates and physical complexes

As unique biopolymeric architectures, covalently and electrostatically protein-polysaccharide (PRO-POL) systems can be utilized for bioactive delivery by virtue of their featured structures and unique physicochemical attributes. PRO-POL systems (i. e, microscopic /nano-dimensional multipolymer particles, molecularly conjugated vehicles, hydrogels/nanogels/oleogels/emulgels, biofunctional films, multilayer emulsion-based delivery systems, particles for Pickering emulsions, and multilayer coated liposomal nanocarriers) possess a number of outstanding attributes, like biocompatibility, biodegradability, and bioavailability with low toxicity that qualify them as powerful agents for the delivery of different bioactive ingredients. To take benefits from these systems, an in-depth understanding of the chemical conjugates and physical complexes of the PRO-POL systems is crucial. In this review, we offer a comprehensive study concerning the unique properties of covalently/electrostatically PRO-POL systems and introduce emerging platforms to fabricate relevant nanocarriers for encapsulation of bioactive components along with a subsequent sustained/controlled release.

Progress in Colloid Delivery Systems for Protection and Delivery of Phenolic Bioactive Compounds: Two Study Cases—Hydroxytyrosol and Curcumin

Insufficient intake of beneficial food components into the human body is a major issue for many people. Among the strategies proposed to overcome this complication, colloid systems have been proven to offer successful solutions in many cases. The scientific community agrees that the production of colloid delivery systems is a good way to adequately protect and deliver nutritional components. In this review, we present the recent advances on bioactive phenolic compounds delivery mediated by colloid systems. As we are aware that this field is constantly evolving, we have focused our attention on the progress made in recent years in this specific field. To achieve this goal, structural and dynamic aspects of different colloid delivery systems, and the various interactions with two bioactive constituents, are presented and discussed. The choice of the appropriate delivery system for a given molecule depends on whether the drug is incorporated in an aqueous or hydrophobic environment. With this in mind, the aim of this evaluation was focused on two case studies, one representative of hydrophobic phenolic compounds and the other of hydrophilic ones. In particular, hydroxytyrosol was selected as a bioactive phenol with a hydrophilic character, while curcumin was selected as typical representative hydrophobic molecules.

Pickering emulsions stabilized by pea protein isolate-chitosan nanoparticles: fabrication, characterization and delivery EPA for digestion in vitro and in vivo

The work aimed to prepare pea protein isolate-chitosan (PPI-CS) nanoparticles, fabricate PPI-CS nanoparticles stabilized Pickering emulsions (PPI-CS Pickering emulsions) and deliver EPA for digestion in vitro and in vivo. The nanoparticles were characterized by scanning electron microscopy (SEM), and PPI-CS Pickering emulsions were characterized by physicochemical and rheological properties. The results showed that the size of PPI-CS nanoparticles was 194.22 ± 0.45 nm. Rheological measurement showed that the PPI-CS Pickering emulsions possessed a gel-like network. EPA encapsulated Pickering emulsions (EPA-PE, φ = 0.6) exhibited a high retention rate (93%) during storage and performed a lower release rate compared with EPA-PE (φ = 0.4) in vitro digestion. The area under the curve of EPA concentration of EPA-PE group and EPA-emulsions (EPA-Em) group was 1.71 and 1.48, respectively. It demonstrated that PPI-CS Pickering emulsions provided the possibility to deliver EPA for digestive absorption.

Curcumin, a potent therapeutic nutraceutical and its enhanced delivery and bioaccessibility by pickering emulsions

Curcumin is a biomolecule with functional moieties, which contribute to its anti-inflammatory, anticancer, and antioxidant properties. It has shown several therapeutic effects on treating inflammatory and neurodegenerative diseases and contributes to the reduction of oxidative stress and damage to body tissues. However, its low solubility and fast metabolism limit its absorption in the gastrointestinal (GI) tract and lead to its low bioavailability. Preparation of Pickering emulsions stabilized with mineral or biopolymer-based nanoparticles can be an effective strategy for enhancing the stability of curcumin against degradation, increasing its bioaccessibility in the GI tract, and achieving its controlled release at various locations based on changes in environmental conditions. Various nanoparticles prepared from minerals, proteins, and polysaccharides show potential for stabilizing the curcumin-loaded emulsions, and their wettability can be altered through complexation and formation of hybrid nanoparticles. Stabilization of Pickering emulsions with polysaccharide-based nanoparticles and their complexes can enhance the stability of the curcumin against degradation. Moreover, various protein-based nanoparticles and their conjugated forms with other proteins or polysaccharides can enable the preparation of high internal phase Pickering emulsions (HIPEs) with concomitant higher loading and bioaccessibility of the curcumin molecule. In light of the several therapeutic properties of curcumin, this review article aims to highlight recent studies and the strategies used for the preparation of curcumin Pickering emulsions stabilized by various nanoparticles for enhancing its bioaccessibility during metabolism. These may be useful in pharmaceutical and food industries for drug development and delivery and fortification of food products with this nutraceutical component.

Protection of menhaden oil from oxidation in Pickering emulsion-based delivery systems with α-lactalbumin-chitosan colloidal nanoparticle

In this study, α-lactalbumin-chitosan (ALA-CHI) colloidal nanoparticles were spontaneously formed mainly through electrostatic interactions for stabilizing Pickering emulsion loaded with health-beneficial but unstable menhaden oil. The oxidative stability of menhaden oil was supposed to be significantly enhanced with Pickering emulsion-based delivery systems with ALA-CHI colloidal particles. The film of ALA-CHI colloidal nanoparticles had higher surface hydrophobicity than ALA at pH 5.0, and 6.5. A near-neutral wettability (89.6°) of ALA-CHI nanoparticles was observed at pH 5.0. Stable Pickering emulsions (60% menhaden oil fraction, w/w) were successfully fabricated with only 0.12% (w/w) of ALA-CHI nanoparticles. Pickering emulsions exhibited superior storage, heat, and centrifugation stability. The formation of gel-like structures was confirmed by rheological results. The viscosity and storage modulus in the frequency range of 0.1 to 10 Hz with a 1.0% strain exhibited remarkable increases with increasing colloidal particle concentration or oil fraction. Increasing oil fractions from 20% to 60% (w/w) or colloidal particle concentrations 0.12% to 2.40% (w/w) can pronouncedly facilitate the inhibition of lipid oxidation, as confirmed by detecting the formation of primary and secondary oxidation products.

Food-grade systems for delivery of DHA and EPA: Opportunities, fabrication, characterization and future perspectives

Docosahexaenoic acid (C22: 6n-3, DHA) and eicosapentaenoic acid (C20: 5n-3, EPA) have been shown to provide the opportunity to inhibit onset and escalation of chronic diseases. Nevertheless, their undesirable characteristics including poor water solubility, oxidation sensitivity, high melting point and unpleasant sensory attributes hinder their application in the food industry. In recent years, utilizing food-grade delivery systems to deliver DHA/EPA and improve their biological efficacy has emerged as an attractive approach with fascinating prospects. This review focuses on introducing potential delivery systems for DHA/EPA, including microemulsions, nanoemulsions, Pickering emulsions, hydrogels, lipid particles, oleogels, liposomes, microcapsules and micelles. The opportunities, fabrication and characterization of these delivery systems loaded with DHA/EPA are highlighted. Besides, food sources of DHA/EPA, their benefits to the human body and a series of challenges for effective utilization of DHA/EPA are discussed. Promising future research trends of food-grade systems for delivery of DHA/EPA are also presented. Conducting in vivo experiments, applying DHA/EPA-loaded delivery systems into real food, improving the applicability of such delivery systems in industrial production, co-encapsulating DHA/EPA with other substances, seeking measures to improve the performance of existing delivery systems and developing novel food-grade delivery systems inspired by other fields are various future considerations.

Application of Advanced Emulsion Technology in the Food Industry: A Review and Critical Evaluation

The food industry is one of the major users of emulsion technology, as many food products exist in an emulsified form, including many dressings, sauces, spreads, dips, creams, and beverages. Recently, there has been an interest in improving the healthiness, sustainability, and safety of foods in an attempt to address some of the negative effects associated with the modern food supply, such as rising chronic diseases, environmental damage, and food safety concerns. Advanced emulsion technologies can be used to address many of these concerns. In this review article, recent studies on the development and utilization of these advanced technologies are critically assessed, including nanoemulsions, high internal phase emulsions (HIPEs), Pickering emulsions, multilayer emulsions, solid lipid nanoparticles (SLNs), multiple emulsions, and emulgels. A brief description of each type of emulsion is given, then their formation and properties are described, and finally their potential applications in the food industry are presented. Special emphasis is given to the utilization of these advanced technologies for the delivery of bioactive compounds.

Hydrogels assembled from ovotransferrin fibrils and xanthan gum as dihydromyricetin delivery vehicles

Novel ovotransferrin fibril–xanthan gum hydrogels were assembled to deliver dihydromyricetin effectively.