Root canal obturation materials and filling techniques for primary teeth: In vitro evaluation in polymer-based prototyped incisors

Reducing apical voids for intra-canal sealer injection using a modified passive deflation needle

The aim of the study was to evaluate the ability of a modified passive deflation needle to reduce the apical voids during the intra-canal iRoot SP sealer injection. A modified passive deflation injection needle was designed. Forty 20°-curved and twenty S-shaped single-canal resin block models were allocated into six groups. Each group was mechanically prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Radiographs were taken to measure the length of apical void in each specimen. Similarly, twenty single-canal extracted premolars were collected and randomly divided into four groups. Each group was prepared to #25/04 or #25/06 file; then the root canals were injected with iRoot SP sealer using a modified needle or a normal plastic needle. Roots were then scanned using micro-computed tomography (micro-CT), and the volume of voids in root canals was analyzed and compared among groups. Statistical analysis demonstrated that the length and the volumetric percentage of voids were much lower in the modified needle group in both resin block root canal models and extract teeth than the normal plastic needle group (P < 0.05). The modified passive deflation needle can efficiently reduce apical voids during the intra-canal iRoot SP sealer injection.

Solcia AB, Guerreiro-Tanomaru JM, Tanomaru-Filho M, Faria G. Evaluation of Solubility, and Volumetric and Morphological Alterations of Bioceramic Filling Material for Primary Teeth: A New Methodological Approach

Objective

To evaluate the solubility and the volumetric and morphological alterations of bioceramic filling material (Bio-CP) for primary teeth.

Materials and Methods

Bio-CP, Calen thickened with zinc oxide (Calen-ZO), and with zinc oxide eugenol (ZOE) were placed in 1- or 2-mm-diameter polyethylene tubes and immersed in water or phosphate-buffered saline (PBS) for 30 days. The solubility (mass loss) was assessed using methodology modified from ISO 6876. Filling capacity, volumetric changes, and presence of voids were assessed by microcomputed tomography (micro-CT). The surface distribution of the chemical elements and the crystalline phases was evaluated by energy scattering X-ray scanning electron microscopy (SEM-EDX) and X-ray diffraction (XRD) to detect hydroxyapatite precipitate and components. The Shapiro-Wilk, Kruskal-Wallis, and Dunn's or two-way ANOVA and Tukey post hoc test were used (α = 0.05).

Results

The solubility was ZOE > Calen-ZO = Bio-CP. Calen-ZO and Bio-CP were more soluble in water than in PBS. All the materials showed greater solubility in 2-mm tube diameter in both PBS and distilled water, except for Bio-CP in distilled water, which showed no difference between both tube diameters (1 and 2 mm). Only Calen-ZO and ZOE were analyzed by micro-CT, because Bio-CP separated into two phases during scanning. Calen-ZO had greater volumetric loss and presence of voids than ZOE in water, but there was no difference in PBS. The hydroxyapatite precipitate on the surface of Bio-CP and Calen-ZO was detected after immersion in PBS.

Conclusion

Although Bio-CP had acceptable solubility and filling capacity, its composition did not allow a proper volumetric and void assessment. From a clinical perspective, Bio-CP has the potential to become a suitable material for root canal filling in primary teeth. Nonetheless, its composition must first be revised to achieve better chemical stability prior to its recommendation.

Evaluation of calcium hydroxide root canal filling materials by cone beam computed tomography and three-dimensional modeling

AIM

The aim of this study was to compare the effectiveness of filling pastes in resin prototype primary molars by cone beam computed tomography (CBCT) and 3D modeling.

Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT

AIM AND BACKGROUND

To compare the root canal volume in primary teeth using hand and rotary instruments and to evaluate root canal filling techniques and flow of root canal obturation materials in the postinstrumented root canal volume using spiral computed tomography (SCT).

MATERIALS AND METHODS

Freshly extracted 16 primary molars were randomly divided into two groups and subjected to SCT analysis before and after instrumentation. For the manual technique (group I) with eight teeth were prepared using K files, and rotary (group II) eight teeth preparation was performed with ProTaper files. The filled volume in each canal was measured using SCT, and the percentage of obturated volume was calculated. The data were statistically analyzed using the Mann-Whitney U test.

RESULTS

There was a statistically significant difference in both groups' volume of root canals enlarged. Even though both K files and the ProTaper system brought about enlarged canals after instrumentation, there was a statistically significant increase in volume after using K files in two canals. In three canals, there was a statistically significant increase in volume after using ProTaper. Irrespective of the obturation technique and materials used, there is no statistically significant difference in the volume after obturation.

CONCLUSION

From the results of this study, the ProTaper file system shows suitable volumetric enlargement up to an optimum level, which is needed in primary root canal walls, and is better in canal shaping, as evidenced by good postobturation volume.

CLINICAL SIGNIFICANCE

The traditional method of cleaning and shaping the root canals in permanent teeth using manual stainless-steel files can lead to undesirable curvatures in root canal morphology, making correctly filling the root canals difficult. It is also time-consuming and sometimes leads to iatrogenic errors. Rotary nickel-titanium (Ni-Ti) instrumentation techniques have been developed to overcome these problems. How to cite this article: Yadav DBUC, Varma RB, Kumar JS, et al. Volumetric Analysis of Hand and Rotary Instrumentation, Root Canal Filling Techniques, and Obturation Materials in Primary Teeth Using Spiral CT. J Contemp Dent Pract 2024;25(3):250-259.

Three-dimension model of root canal morphology of primary maxillary incisors by micro-computed tomography study

The success of root canal treatment for deciduous teeth depends upon the shape of the root canal, among other factors. Despite this, there are limited reports on the use of high-resolution micro-CT to describe the root canal morphology of primary maxillary incisors. In this study, we aimed to create a three-dimensional (3D) digital model of the root canal morphology of primary maxillary incisors using microcomputed tomography (micro-CT). To provide a reference for the development of restorative posts for the primary maxillary incisors. Primary maxillary central and lateral incisors (n = 10 each) were analysed. Micro-computed tomography was used to conduct 3D analyses of the root canal system of the primary maxillary incisors. The canal volume and surface area of the primary maxillary central incisors were larger than those of the primary maxillary lateral incisors. The structural model index value was significantly lower in central incisors. At the cervical level and the interface between the cervical and middle one-third cross-sectional levels, the root canals of the primary maxillary lateral incisors were significantly rounder. The labio-palatal dimension and the diameters of the central incisors at the four different levels were significantly smaller than the diameter of the mesio-distal dimension. The taper of the central and lateral incisors gradually increased from the apical one-third to the cervical one-third in the labio-palatal dimension. The data obtained from the 3D analysis of maxillary incisors in this study will contribute to the design of root canal posts.

Micro-computed tomography analysis of calcium hydroxide delivery efficacy in C-shaped canal system of mandibular second molars

BACKGROUND

Calcium hydroxide [Ca(OH)2] is widely accepted as a biocompatible interappointment intracanal medicament. This study aimed to analyze the efficacy of Ca(OH)2 placement into the C-shaped canal system of mandibular second molars using the syringe method with and without lentulo spiral utilizing micro-computed tomography (micro-CT).

METHODS

Twenty-four extracted mandibular second molars were instrumented and classified into C-shaped floors (n = 12) and non-C-shaped floors (n = 12). Both groups were placed with Ca(OH)2 using the syringe system, then all teeth were scanned and cleaned, and placed with Ca(OH)2 again but with the syringe system followed by lentulo spiral and rescanned. The specimens were scanned using micro-CT to analyze the volume, volume percentage, uncontacted surface area, and uncontacted surface area percentage of Ca(OH)2 with the two delivery methods in the entire canal and at the apical 4 mm of the canal. Mann-Whitney test and Wilcoxon signed-rank test were used to determine the statistical differences among the groups.

RESULTS

Syringe administration used in conjunction with lentulo spiral presented lower uncontacted surface area, a lower percentage of uncontacted surface area, larger volume, and a higher percentage of volume than syringe without lentulo spiral (P < 0.05). There was no significant difference between the C-shaped floor group and the non-C-shaped floor group (P > 0.05) in the Ca(OH)2 uncontacted surface area, volume, and percentages at different regions of canals and among different delivery techniques groups.

CONCLUSIONS

The lentulo spiral and syringe technique combination can increase the volume and contacted surface area of Ca(OH)2 in the C-shaped canal system of mandibular second molars.

Shaping ability of a pediatric motor-driven instrumentation system in primary molar root canal prototypes

Evaluate the shaping ability and preparation time using a pediatric motor-driven rotary instrumentation compared to other systems in resin prototypes of primary molars.

METHODS

Thirty specimens were scanned in micro-CT and divided into three groups according to the instrumentation type: pediatric motor-driven Sequence baby File (SBF); conventional motor-driven (Sequence Rotary File - SRF); manual K file. Instrumentation time was timed. After preparation, the specimens were scanned again. The pre- and post-instrumentation images were superimposed to measure the amount of root canal deviation and the resin remnant thickness. ANOVA followed by the Tukey test analyzed the comparisons between groups (p<0.05).

RESULTS

No statistically significant differences occurred in root canal deviation among groups (p>0.05). There were statistically significant differences in the comparison among root thirds (p<0.001) but without significant differences in the interaction group vs. root third (p>0.05). Both motor-driven instrumentations showed statistically greater weariness than manual instrumentation (p<0.001), without significant significant differences between SBF and SRF. Motor-driven instrumentation had a shorter working time than manual instrumentation (p<0.001).

CONCLUSION

Pediatric motor-driven instrumentation demonstrated good outcomes in relation to root canal deviation and amount of remnant structure, with shorter instrumentation time. SBF can be a suitable alternative for endodontic instrumentation in primary molars.

Eugenol-Based Polymeric Materials-Antibacterial Activity and Applications

Eugenol (4-Allyl-2-methoxy phenol) (EUG) is a plant-derived allyl chain-substituted guaiacol, widely known for its antimicrobial and anesthetic properties, as well as the ability to scavenge reactive oxygen species. It is typically used as a mixture with zinc oxide (ZOE) for the preparation of restorative tooth fillings and treatment of root canal infections. However, the high volatility of this insoluble-in-water component of natural essential oils can be an obstacle to its wider application. Moreover, molecular eugenol can be allergenic and even toxic if taken orally in high doses for long periods of time. Therefore, a growing interest in eugenol loading in polymeric materials (including the encapsulation of molecular eugenol and polymerization of EUG-derived monomers) has been noted recently. Such active macromolecular systems enhance the stability of eugenol action and potentially provide prolonged contact with pathogens without the undesired side effects of free EUG. In this review, we present an overview of methods leading to the formation of macromolecular derivatives of eugenol as well as the latest developments and further perspectives in their pharmacological and antimicrobial applications.

Effect of conventional needle irrigation, passive ultrasonic irrigation, sonic irrigation and XP-endo finisher in removing intracanal Vitapex paste

To compare the efficiency of conventional needle irrigation, passive ultrasonic irrigation, sonic irrigation and XP-endo Finisher in removing Vitapex paste from root canals. The root canals of human single-rooted teeth were prepared and obturated with Vitapex paste. After 2 weeks, the 48 teeth were randomly allocated into four groups: conventional needle irrigation (CNI) group, passive ultrasonic irrigation (PUI) group, sonic irrigation (SI) group and XP-endo Finisher (XP) group. The specimens of four groups were scanned using a micro-computed tomography after the Vitapex pastes was removed. The results showed that more residual paste was left in the CNI group than in the other three groups (p < 0.05). There was no significant difference among the PUI, SI and XP group (p > 0.05). And, the majority of the residual Vitapex was found in the apical third, with a small amount in the middle third after using any of the three agitated irrigation techniques.

The Contribution of Various In Vitro Methodologies to Comprehending the Filling Ability of Root Canal Pastes in Primary Teeth

A void-free obturation during root canal treatment on primary teeth is currently very difficult to attain. In this study, the pulpectomy filling abilities of Bio-C Pulpecto (Angelus, Basil, Londrina, Paraná, Brazil) and of zinc oxide eugenol, or "ZOE" (DenPro, Prevest, New York, NY, USA), were compared using several in vitro techniques. Therefore, 30 primary anterior teeth were used in the present in vitro study. Analysis of variance (ANOVA), including a multiple comparison procedure (Holm-Sidak method, Dunn's Method, or Tukey test), was used. On micro-CT, Bio-C Pulpecto exhibited higher void percentages than did ZOE (10.3 ± 3.8%, and 3.5 ± 1.3%), respectively (p < 0.05). With digital microscopy, higher total void percentages were found in the BC (13.2 ± 26.7%) group compared to the ZOE (2.7 ± 2.8%) group (p < 0.05). With the CLSM, mean tubular penetration depths were higher for Bio-C Pulpecto than for ZOE in all canal thirds (p < 0.05). SEM images demonstrated no tags into dentinal tubules in either group throughout the three thirds. Moreover, higher statistically significant flowability was found for Bio-C (2.657 ± 0.06 mm) compared to ZOE (1.8 ± 0.13 mm) (p < 0.05). The findings of this study indicate that neither ZOE nor Bio-C Pulpecto appears to meet the criteria for an ideal root canal filling paste for primary teeth. This study laid the groundwork for future research by determining how micro-CT, digital microscopy, SEM, and CLSM contribute to our understanding of the filling process of primary teeth. More thorough research on the mechanism of root canal obturation on primary teeth is required to achieve a long-term successful root canal therapy in young children.

Comparative volumetric analysis of three different obturating materials in primary molars under cone beam computed tomography: an in-vitro study

BACKGROUND

To increase the success rate of the endodontic treatment in primary teeth various, obturating materials have been introduced to meet the specific requirements for deciduous dentition and to create a three-dimensional (3D) seal to prevent recurrence of bacterial infection. This study was conducted to compare and evaluate the three-dimensional seal and volumetric filling of primary canals obturated with different medicaments using cone beam computed tomography (CBCT).

METHODS

In-vitro cross sectional study was designed with sample size of 108 specimens. Thirty-six extracted primary molars were selected for the study and randomly divided into 3 groups A (Metapex; Meta Biomed, Osong-eup, Korea), B (Endoflas; Sanlor Laboratories, Cali, Colombia) and C (Zinc oxide eugenol; DPI India Ltd., Mumbai, India). After access opening, canals were prepared up to 30 no k- file followed by obturation with Metapex, Endoflas and Zinc oxide eugenol in respective groups. CBCT was done before and after the obturation for volumetric analysis. The data obtained were analyzed to attain POV (percentage of obturated volume) and PVV (percentage volume of voids).

RESULTS

The percentage of obturated volume (POV) was highest for Endoflas group (88.87) followed by Metapex (83.58) and ZnO (72.78) and the difference was statistically significant. Whereas the percentage volume of voids (PVV) was more in Zinc oxide eugenol group (27.22) followed by Metapex (16.42) and least voids were seen in Endoflas group (11.14).

CONCLUSIONS

Voids were found in all three obturating materials. Endoflas showed superior three-dimensional (3D) sealing capability whereas ZnO eugenol having least sealing capacity.

Evaluation of pH and calcium ions release of two tricalcium silicate-based sealers through roots of primary teeth

Background

This study aimed to evaluate the pH and calcium ions (Ca2+) release from two tricalcium silicate-based sealers (Sealer Plus BC and Bio-C Pulpecto) through roots of primary teeth.

Methods

Forty root canals of primary incisors were prepared and distributed into four groups according to the filling material: GPlusBC (Sealer Plus BC); GBioC (Bio-C Pulpecto); GUltra (Ultracal); and GC (no filled). pH measurement was performed with a digital pH meter, and the Ca2+ release was measured in an atomic absorption spectrophotometer at baseline, 24 h and 1, 2, 3, and 4 weeks later. The data were analyzed using two-way ANOVA and Tukey's post hoc tests.

Results

The results did not reveal significant differences between the groups in terms of pH in 24 h, 1-, and 2-weeks' periods. After 4 weeks, there was a significant difference, with the highest mean pH values in GUltra, followed, respectively, by GPlusBC and GBioC. Regarding the Ca2+ release, the GUltra showed greatest mean values at all evaluated times, and the other groups showed no difference between them.

Conclusion

Both sealers were able to promote the elevation of the pH and Ca2+ release through roots of primary teeth, which brings favorable properties for their use as a filling material.

Void characteristics and tortuosity of calcium silicate-based cements for regenerative endodontics: a micro-computed tomography analysis

Background

Internal voids of materials can serve a hub for microorganism and affect the sealing ability. This study aimed to evaluate the sealing performance of calcium silicate-based cements in immature teeth treated with regenerative endodontics.

Methods

Twenty single root canals from immature permanent premolars were prepared using regenerative endodontic protocols. The root canals were randomly divided into two groups and sealed with mineral trioxide aggregate (MTA) and Biodentine (BD). The teeth were kept in humid environment for 7 days and scanned using micro-computed tomography. The voids within the cements were segmented and visualized using image processing, incorporating the modified Otsu algorithm. The porosity of each sample was also calculated as the ratio between the number of voxels of voids and the volume of the cements. Tortuosity was also calculated using the A-star algorithm.

Results

Voids larger than 70 μm were predominantly observed in the top and interfacial surface of cements. The others were evenly distributed. MTA and BD showed the same level of porosity and tortuosity at interfacial surfaces. In inner surfaces, MTA showed more less porosity and tortuosity compared to BD (p < 0.05).

Conclusions

There were no differences in sealing performance between MTA and BD.

Comparison of Various Root Canal Filling Materials and Obturation Techniques for Primary Teeth Using Microcomputed Tomography

Aim:

The aim of this study was to compare the effectiveness of different filling materials and obturation techniques for root canal obturation in primary teeth.

Materials and Methods:

Eighty maxillary primary incisors were included in this in vitro study. After biomechanical preparation, all samples were scanned using microcomputed tomography (micro-CT) and root canal volumes were calculated. Samples were grouped according to filling materials and obturation techniques, with ten samples in each group. The samples were filled with zinc oxide eugenol (ZOE) and Vitapex using four different obturation techniques (local anesthesia syringe, lentulo spiral, pastinject, and lentulo spiral–ultrasonic activation). After filling, samples were scanned a second time using micro-CT and root canal volumes were calculated. The statistical analysis was performed using SPSS version 24.0. Data were analyzed by Kruskal–Wallis and Mann–Whitney U tests.

Results:

When the ZOE and Vitapex were compared, it was observed that there were no significant differences between their postobturated volumes, percentage obturated volume (POV), internal void (IV), and percentage of internal void volume (PIV) ( P > .05). The local anesthesia syringe group had a significantly lower postobturated volume and POV, and a significantly higher IV and PIV for both filling materials than that by the other groups ( P < .05). There was no significant difference between the other obturation techniques ( P > .05). For the local anesthesia syringe group, postobturated volume and POV were significantly higher and IV and PIV were significantly lower with Vitapex than with ZOE ( P < .05). There was no significant difference between the other obturation techniques filled either with ZOE or Vitapex ( P > .05).

Conclusion:

Except for the syringe technique, no difference was observed between the ZOE and Vitapex materials. The syringe technique used in the primary root canal filling was less effective than the other techniques, which had similar efficacy, and in this technique, more effective canal filling was achieved with Vitapex.