Residue of gutta-percha and a glass ionomer cement sealer following root canal retreatment

The efficiency of different irrigation activation techniques in the removal of calcium silicate-based endodontic sealer from artificially created groove

This study evaluated the removal of a calcium silicate-based sealer (EndoSeal MTA) with needle irrigation (NI), passive ultrasonic irrigation (PUI), XP-endo Finisher (XPF) and EDDY. A total of 56 human mandibular premolars were instrumented up to size 40.04 taper. The roots were separated longitudinally, and grooves were prepared with an ultrasonic tip at one-half of each root canal. The grooves were covered with EndoSeal MTA and re-attached roots were investigated based on the activation techniques applied. The results showed that significantly more material (p < 0.05) was removed in the EDDY group compared to the NI, PUI and XPF groups in the apical region. In the coronal region, no significant difference was observed between EDDY, XPF and PUI (p > 0.05), whereas all the latter were significantly more effective than NI (p < 0.05). These findings show that the removal of EndoSeal MTA can be more effective with EDDY compared to XPF, PUI and NI in the apical region.

Outcome of single-visit- versus two-visit root canal retreatment in teeth with periapical lesions: a randomized clinical trial

AIM

To evaluate the clinical and radiographic outcome of single-visit root canal retreatment and to compare the results with conventional two-visit root canal retreatment as control group.

METHODOLOGY

One hundred root canal-treated, single-rooted asymptomatic teeth with periapical lesion were retreated by one operator. Fifty of the teeth were randomly assigned to the single-visit group and the others were treated in two-visits. In both groups, root canal filling material was removed, and re-instrumentation of the root canal was performed using step-back technique with hand files using 2.5% NaOCl and 5% EDTA as irrigants. In the single-visit group 5 ml 2% chlorhexidine (CHX) were applied as the final irrigation and in the two-visit group, calcium hydroxide paste was placed into the root canal as an interappointment dressing. All root canal obturations were performed with lateral compaction. All patients were followed up for 24 months. Success was determined depending on both healed and healing cases. The chi-square or Fisher's Exact test was used to analyse the differences between the groups for success rates and the factors affecting the outcome.

RESULTS

The recall rate was 89 (89%). At 24 months, 39 teeth (88.6%) were considered as healed, 3 teeth (6.8%) as healing, and 2 teeth (4.5%) were identified as failed in the single-visit group, while in the two-visit group 39 teeth (86.7%) had healed, 2 teeth (4.4%) were scored as healing, and 4 teeth (8.9%) as failed. There was no statistically significant difference in the success rates between the two groups (P > 0.05). Size of the lesion and the preoperative length of root canal filling had a statistically significant impact on the outcome (P < 0.05).

CONCLUSION

No statistically significant difference was observed in terms of healing in 24-month follow-up of retreatments completed in single-visit or two-visits in asymptomatic teeth with periapical lesions. Size of the periapical lesion and initial apical level of root canal filling have affected the outcome of root canal retreatment.

Critical analysis of research methods and experimental models to study removal of root filling materials

Despite enjoying high favourable outcome rates, root canal treatment is not always successful. Root canal retreatment is a widely practised option for managing a non-healing root treated tooth. A basic distinction between retreatment and initial treatment is the requirement to remove the existing root filling material occupying the root canal space. Only then, can the technical deficiencies and possible causes of failure be addressed. Hence, the successful removal of the root filling material is critical to achieving the objectives of retreatment. Many different materials and techniques have been used for root canal filling, which have been documented in a plethora of studies; these are mainly laboratory studies investigating the removal of root filling materials. To help guide future research, which may then better inform clinical practice in relation to retreatment procedures, the focus of this narrative review is on the research methods and experimental models employed to study the removal of root filling materials. The current available literature demonstrates great variation in the research methodologies used to study the removal of root filling material, including direct visualization by splitting tooth samples or clearing, three-dimensional radiographic imaging including using microcomputed tomography or cone-beam computed tomography, and a combination of these techniques. Depending on the research method employed, variation also exists in quantification of root filling material removal; these include measurements of surface area, volume or weight, and criteria-based (semi-quantitative) assessment. Experimental models, using human teeth or resin models, differ with respect to standardization techniques and replication of the clinical scenario including initial sample preparation, canal filling, allocation and technical aspects of retreatment procedures. Future models should replicate, as closely as possible, the clinical scenario. Currently, microcomputed tomography provides a highly detailed, non-invasive and non-destructive method of objectively assessing and quantifying root filling removal.

Evaluation of the accuracy of different apex locators in determining the working length during root canal retreatment

Background. This study aimed to assess the accuracy of three electronic apex locators (EALs) (Dentaport ZX [J Morita, Tokyo, Japan], Propex Pixi [Dentsply Maillefer, Ballaigues, Switzerland], and iPex II [NSK, Tokyo, Japan]) during root canal retreatment. Methods. The root canal lengths of 90 extracted single-rooted human teeth were determined under a dental operating microscope at ×10 magnification. The actual working length (AWL) was 0.5 mm less than the root length. Electronic measurements were performed with the three EALs. The root canals were instrumented and filled to the actual working length using the lateral compaction technique. After seven days, the teeth were retreated until the retreatment file was applied to the root canal at the working length determined by EALs, and then, the three EALs were used for determining the retreatment working length. Data were analyzed using chi-squared and Kruskal-Wallis tests. Results. In the retreatment, the accuracy of EALs was reported at %83.3 for Dentaport ZX, %83.4 forPropex Pixi, and %80 for iPex II within a tolerance of 0.5± mm of the AWL. Conclusion. Under the limitations of this study, Dentaport ZX, Propex Pixi, and iPex II can be a useful adjunct during retreatment. Clinicians should be aware that residual materials in the root canal during retreatment can affect the accuracy of EALs.

Evaluation of Two Shaping Systems and Two Ultrasonic Irrigation Devices in Removing Root Canal Filling Material from Mesial Roots of Mandibular Molars: A Micro CT Study

We assessed the efficiency of two shaping file systems and two passive ultrasonic irrigation (PUI) devices for removing filling material during retreatment. The mesial canals from 44 extracted mandibular molars were prepared and obturated. The teeth were randomly divided into two groups, and then one group was retreated with Reciproc R25 (VDW, Munich, Germany) (n = 44) and the other group was retreated with 2Shape (TS, Micro Mega, Besançon, France) (n = 44). A micro-computed tomography (CT) scan was taken before and after the retreatment to assess the volume of the filling material remnants. The teeth were then randomly divided into four groups to test two different PUI devices: Irrisafe (Satelec Acteon Group, Merignac, France) and Endo Ultra (Vista Dental Products, Racine, WI, USA). The teeth in Group A were retreated with 2Shape to test the Endo Ultra (n = 22) device, the teeth in Group B were retreated with 2Shape in order to test the Irrisafe (n = 22) device, the teeth in Group C were retreated with Reciproc to test the Endo Ultra (n = 22) device, and Group D was retreated with Reciproc to test the Irrisafe (n = 22) device. A third micro-CT scan was taken after the retreatment to test the PUIs. The percentage of Gutta-Percha (GP) and sealer removed was 94.75% for TS2 (p < 0.001) and 89.3% for R25 (p < 0.001). The PUI significantly enhanced the removal of the filling material by 0.76% for Group A (p < 0.001), 1.47% for Group B (p < 0.001), 2.61% for Group C (p < 0.001), and by 1.66% for Group D (p < 0.001). 2Shape was more effective at removing the GP and sealer during retreatment (p = 0.018). The supplementary approach with PUI significantly improved filling material removal, with no statistical difference between the four groups (p = 0.106).

Cleanliness of Canal Walls following Gutta-Percha Removal with Hand Files, RaCe and RaCe plus XP-Endo Finisher Instruments: A Photographic in Vitro Analysis

INTRODUCTION

Gutta-percha must be removed from the root canal space during retreatment to ensure a more favorable outcome. The aim of this study was to compare the efficacy of hand instruments, RaCe and RaCe plus XP-endo finisher instruments in removal of gutta-percha from root canal walls during retreatment.

METHODS AND MATERIALS

Thirty single-rooted premolars were prepared, obturated, and divided into three groups according to retreatment method; in group 1, retreatment was carried out by hand instruments, while in groups 2 and 3 retreatment was done using RaCe rotary files alone or accompanied by XP-endo finisher instruments, respectively. After retreatment, teeth were sectioned longitudinally and photographic images were taken. The amount of remaining gutta-percha in coronal, middle and apical thirds was quantified using Image J software. The two-way ANOVA and post hoc Tukey's tests were used to analyze data. The level of significance was set at 0.05.

RESULTS

RaCe cleaned the apical third significantly better than hand instrumentation. In the coronal third, RaCe+XP-endo finisher was more effective than RaCe. RaCe+XP-endo finisher was more effective than hand instrumentation in the entire root canal. The amount of remaining gutta-percha was the least in the apical part and increased toward the coronal part with the use of XP-endo finisher (P<0.05).

CONCLUSION

Rotary instrumentation was more effective in removing gutta-percha from the canal walls. Furthermore, use of XP-endo finisher file resulted in cleaner canal walls and was more effective in removing gutta-percha from the coronal toward the apical part of the canal.

Comparison of three retreatment techniques with ultrasonic activation in flattened canals using micro-computed tomography and scanning electron microscopy

AIM

To use micro-CT to quantitatively evaluate the amount of residual filling material after using several techniques to remove root fillings with and without ultrasonic activation and to analyse the cleanliness of the root canal walls and dentine tubules with scanning electron microscopy (SEM).

METHODOLOGY

The root canals of one hundred and eight human mandibular incisors were selected and instrumented with rotary files using the BioRace system up to file size 40, .04 taper. After instrumentation, the teeth were filled using a hybrid technique with gutta-percha and sealer then divided into three groups according to the method used for removing the root filling: G1-Reciproc (using only instrument R50), G2-ProTaper Universal retreatment system and G3-Manual (hand files and Gates-Glidden burs). All groups were divided into two subgroups depending on whether ultrasonic agitation was used with the irrigants. Micro-CT scans were taken before and after removal of the filling material to detect residual material in the canal. After micro-CT analysis, the roots were cut in half, imaged by SEM and scored based on the amount of surface covered by root filling remnants. The data were analysed statistically using a significance level of 5%.

RESULTS

All groups had retained material in the root canals after instrumentation. The Reciproc method was associated with less retained material than the ProTaper and Manual methods. Ultrasonic activation significantly reduced the amount of residual root filling in all groups (P < 0.05).

CONCLUSION

None of the instrumentation methods were able to completely remove root filling material. Ultrasonic activation improved the removal of root filling material in all groups.

In vitro evaluation of antimicrobial activity of different Gutta-percha points and calcium hydroxide pastes

Purpose:

To evaluate the antimicrobial activity of different compositions of Gutta-percha points and calcium hydroxide (Ca(OH)₂) pastes, used in endodontic therapy.

Materials and Methods:

The evaluated material consisted of Gutta-percha points containing Ca(OH)₂, Gutta-percha points containing chlorhexidine (Chx), conventional Gutta-percha points and Ca(OH)₂ pastes. Antimicrobial properties of Chx and CaOH paste are compared with CaOH points. Antimicrobial tests included three species of microorganisms: Escherichia coli (ATCC 25923), Staphylococcus aureus (ATCC 25922) Pseudomonas aeruginosa (ATCC BAA-427), the agar disc diffusion method was employed. The plates were kept at room temperature for 2 h for prediffusion and then incubated at 37°C for 24 h. Zones of inhibition were measured.

Results and Conclusion:

All microbial species used in the study were inhibited by the Gutta-percha points containing Chx and by the Ca(OH)₂ pastes, no antimicrobial activity was observed for the other groups (conventional Gutta-percha and Ca(OH)₂ group).

The effect of four different irrigation systems in the removal of a root canal sealer

OBJECTIVES

The aim of this study was to compare the efficiency of sonic, ultrasonic, and hydrodynamic devices in the removal of a root canal sealer from the surface and from simulated irregularities of root canals.

MATERIALS AND METHODS

Fifty-three root canals with two standardized grooves in the apical and coronal parts of longitudinally split roots were covered with AH Plus root canal sealer. Compared were the effects of (control) syringe irrigation, (1) CanalBrush, (2) passive ultrasonic irrigation, (3) EndoActivator, and (4) RinsEndo on the removal of the sealer. The specimens were divided into four groups (N = 12) and one control group (N = 5) via randomization. The amount of remaining sealer in the root canal irregularities was evaluated under a microscope using a 4-grade scoring system, whereas the remaining sealer on the root canal surface was evaluated with a 7-grade scoring system.

RESULTS

Passive ultrasonic irrigation is more effective than the other tested irrigation systems or syringe irrigation in removing sealer from root canal walls (p < 0.01). None of the techniques had a significant effect on cleaning the lateral grooves.

CONCLUSIONS

Within the limitations of this study protocol ultrasonic irrigation shows a superior effect on sealer removal from the root canal surface during endodontic retreatment. Cleaning of lateral grooves seems not to be possible with one of the techniques investigated.

CLINICAL RELEVANCE

Incomplete removal of root canal sealer during re-treatment may cause treatment failure. Passive Ultrasonic irrigation seems to be the most effective system to remove sealer from a root canal.

Comparison of hand and rotary instrumentation for removing gutta-percha from previously treated curved root canals: a microcomputed tomography study

AIM

To compare the efficacy of hand and rotary nickel-titanium (NiTi) instruments in removing filling material from curved root canals of root filled teeth with unknown preparation parameters.

METHODOLOGY

Ninety mandibular molars with root fillings in curved root canals and homogenous root canal filling extending to 0-2 mm short of the radiographic apex were selected. Root canal curvatures and radii were measured in two directions and microcomputed tomography (micro-CT) scans were used to determine preoperative volumes of the filling material. Subsequently, the teeth were assigned to two identical groups (n = 14). The root fillings were removed with Hedström files or FlexMaster NiTi rotary instruments. Postoperative micro-CT imaging was used to assess the percentage of residual filling material as well as the amount of dentine removal. Working time and procedural errors were recorded. Data were compared using analysis of covariance and analysis of variance procedures.

RESULTS

Root canals retreated with Hedström files were associated with less remaining filling material compared with FlexMaster instruments (P < 0.05). Both retreatment techniques removed similar amounts of dentine with no significant differences (P > 0.05). FlexMaster instruments were significantly faster than Hedström files (P < 0.05). No procedural errors were detected in the Hedström group, whilst three instruments fractured in the FlexMaster group.

CONCLUSIONS

Hand instrumentation resulted in significantly less residual filling material than retreatment with rotary NiTi instruments. Dentine removal was not significantly different for both techniques. FlexMaster NiTi rotary files were significantly faster than Hedström files, but were associated with a higher risk of instrument fracture.

Effect of solvents on the accuracy of the Mini Root ZX apex locator

AIM

To evaluate ex vivo, the effects of three solvents on the accuracy of a contemporary electronic root canal length measurement device (ERCLMD), the Mini Root ZX.

METHODOLOGY

The actual working length (AWL) of 56 extracted maxillary incisor teeth were measured with an ERCLMD. All root canals were prepared with the ProTaper system to AWL. Of them, 20 were filled with gutta-percha and a resin-based sealer (Group A), 20 with gutta-percha and a zinc oxide/eugenol-based sealer (Group B), and 16 roots were used as the control group (Group C). Removal of the root filling and repreparation processes were performed using the ProTaper system. Guttasolv and Resosolv were used as the solvents in Group A and Guttasolv and Endosolv E in Group B. After the removal of the root fillings had been achieved, the same ERCLMD was used to measure the working length (WL). Differences between AWL and WL measurements were analysed by paired t-test, and the accuracy of ERCLMD was assessed using chi-squared tests.

RESULTS

There were significant differences between AWL and WL measurements in subgroups A2 (Resosolv group) and B2 (Endosolv E group). In these subgroups, WL was shorter than AWL (P < 0.05). Also, the accuracy of the Resosolv group was significantly lower than the others (P < 0.05) at a ±0.5 mm margin of error.

CONCLUSIONS

Removing root fillings may require use of a solvent. In these cases, ERCLMDs may exhibit a lower accuracy, thus operators must exercise additional care when measuring the working length using ERCLMDs.

The efficacy of ProTaper Universal rotary retreatment instrumentation to remove single gutta-percha cones cemented with several endodontic sealers

AIM

To evaluate residual root filling material following removal of three newly developed root canal sealers used with a matched-taper single-cone root filling technique and to compare the efficacy of ProTaper Universal rotary retreatment instruments with that of a conventional manual technique.

METHODOLOGY

The canals of 120 palatal roots in maxillary molar teeth were instrumented with EndoWave nickel-titanium rotary instruments and filled using Hybrid Root SEAL, EndoSequence BC Sealer, Activ GP system or AH Plus with matched-taper single gutta-percha cones. The root fillings were then removed with ProTaper Universal retreatment rotary instruments or a manual technique. Buccolingual and proximal digital radiographs of the roots were exposed to determine the area of remaining filling material in the coronal, middle and apical thirds. The area percentages of remaining filling material in each third and total canal area were calculated. Data were analysed statistically with Kruskal-Wallis and Mann-Whitney U-tests. The level of significance was set at P<0.05.

RESULTS

Irrespective of the sealer type and retreatment technique, filling material could not be removed completely from the root canals. Significantly, more remaining filling material was observed in the apical third (P<0.05). When comparing the sealers, the only significant difference was detected between AH Plus/manual and Activ GP/manual groups with respect to residual material in the total canal area (P<0.05). There were no significant differences between manual and ProTaper groups.

CONCLUSIONS

When using gross radiographic criteria, the Activ GP was more effectively removed from root canals than AH Plus with hand instrumentation. Hybrid Root SEAL, EndoSequence BC Sealer and AH Plus were removed to a similar extent. ProTaper Universal retreatment instruments were as safe and effective as hand instruments in reaching the working length.

Retreatment efficacy of the Epiphany soft resin obturation system

AIM

To assess the efficacy of retreatment of canals filled with the Epiphany System with and without solvent, with particular reference to the extent of canal enlargement during retreatment.

METHODOLOGY

Sixty roots with canals prepared to apical size 45 were embedded in resin blocks and sectioned vertically. Digital micrographs of canal walls were captured. Roots were re-assembled and filled with Epiphany/Resilon (experimental) or gutta-percha/AH Plus (control). After 8 weeks, canals were retreated to size 45 with or without chloroform, and the time recorded. Roots were split, imaged, re-assembled, retreated to size 55, split and imaged. Root-filling residue, traced at three canal levels, was expressed as percentage of canal surface.

RESULTS

Residue percentage was greater (t-test, P < 0.01) in the experimental group than in the control. Most residue in all specimens was in the apical third (ANOVA, P < 0.01). Chloroform and enlargement to size 55 decreased residue in both groups (t-test, P < 0.01). Retreatment time was longer in the experimental group (P < 0.05), and reduced by chloroform in both groups (P < 0.05).

CONCLUSIONS

The Epiphany System was retreatable with and without chloroform, with lesser efficacy than gutta-percha and AH Plus sealer.

Effectiveness of two nickel-titanium rotary instruments and a hand file for removing gutta-percha in severely curved root canals during retreatment: an ex vivo study

AIM

To evaluate ex vivo the effectiveness of hand files, ProTaper and R-Endo rotary instruments when removing gutta-percha from curved root canals.

METHODOLOGY

Ninety severely curved teeth were divided into three groups. The root canals were accessed, prepared and filled with vertically condensed gutta-percha and sealer. Removal of gutta-percha was performed with the following devices and techniques: Hedström files (Vereinigte Dentalwerke, Munich, Germany), ProTaper (Dentsply Maillefer, Ballaigues, Switzerland) and R-Endo (Micro-Mega, Besançon, France). All techniques were used with the solvent eucalyptol. The amount of filling material debris remaining on root canal walls was assessed radiographically from two directions: mesio-distal and bucco-lingual. The images were digitized and analysed with autocad 2000 software. Total canal area, area of the cervical, middle and apical thirds, and area of remaining filling material from both directions were outlined by two different operators and calculated. Statistical analysis of remaining filling material within each third of the canals was performed by the Kruskal-Wallis test.

RESULTS

Comparisons of the percentages of remaining filling material in the entire canal did not reveal any significant differences between the methods of removal. However, the canal third was of relevance in all groups; the apical third had the most remaining filling material compared with the middle and cervical thirds (P = 0.0012).

CONCLUSION

All instruments left filling material inside the root canal. ProTaper and R-Endo rotary instruments were inadequate for the complete removal of filling material from the root canal system.

Influence of moisture on the apical seal of root canal fillings with five different types of sealer

The aim of this study was to evaluate the influence of moisture on apical leakage using five different types of sealer. There were 120 single-rooted teeth instrumented to .02/#60 and randomly assigned to 10 experimental groups, one control group (AH Plus, lateral condensation) (n = 10) or positive/negative controls (n = 5). Before obturation teeth were dried thoroughly, followed by recontamination with moisture in a wet chamber (moist groups; 37 degrees C for 7 days). The teeth of the experimental groups (a, dry; b, moist) were obturated with sealer (groups 1, AH Plus; 2, Apexit; 3, Ketac-Endo; 4, RoekoSeal; 5, Tubli-Seal) and a single gutta-percha cone .02/#55. Teeth were centrifuged (30 x g for 3 minutes) in 5% methylene blue. Linear dye penetration was measured under a stereomicroscope. Moisture led to less microleakage for Apexit, RoekoSeal, and Tubli-Seal and higher values for AH Plus and Ketac-Endo. Multifactorial ANOVA displayed a significant dependence of leakage on sealer (p < 0.001) and the combination sealer or moisture (p < 0.01). It depends on the sealer type in which way moisture affects the apical seal.

Efficacy of automated versus hand instrumentation during root canal retreatment: an ex vivo study

AIM

To compare automated and manual instrumentation techniques for removing filling material from root canal walls during root canal retreatment.

METHODOLOGY

One hundred extracted human single-rooted teeth were root filled and stored. Specimens were divided into two groups: group A, Endofill plus gutta-percha; group B, Sealer 26 plus gutta-percha. The filling material was removed using the following techniques: group I - Gates-Glidden and K-type files; group II - ProFile; group III - ProTaper; group IV - K3; group V- Micro Mega Hero 642. The remaining filling debris on the root canal walls were assessed radiographically, images were digitized and analysed using Image ProPlus software. The roots were split for evaluation in a stereomicroscope by epiluminescence and photomicrographs were taken for further analysis. The area covered with filling debris was analysed by means of Student's t-test to compare the evaluation methods. The student's t-test was also used to compare the removal of filling materials. An anova test was applied to compare the different techniques (P < 0.05).

RESULTS

A significant difference occurred between radiographic and photomicrographic evaluation methods (P < 0.05). No significant difference was observed between the filling materials on terms of their removal (P > 0.05). Manual instrumentation left more filling debris on the root canal walls when compared to K3 (P < 0.05) and ProTaper (P < 0.01).

CONCLUSIONS

A photomicrographic method by epiluminescence was more effective than the radiographic method to evaluate filling debris. There was no significant difference between the filling materials in terms of their removal. K3 and ProTaper were more efficient than manual instrumentation.

Dissolving efficacy of organic solvents on root canal sealers

The aim of this study was to evaluate the solubility of three types of root canal sealers in three organic solvents used in endodontics. The solubility of calcium-hydroxide-based (Sealer 26), silicon-polydimethylsiloxane-based (RoekoSeal), and zinc-oxide-eugenol based (Endofill and Intrafill) sealers was assessed in eucalyptol, xylol, orange oil, and distilled water. Eighty samples of each filling material were prepared according to the manufacturers' instructions and then divided into four groups for immersion in solvent for 2 or 10 min. The means of sealer dissolution in solvents were obtained by the difference between the original preimmersion weight and the postimmersion weight in a digital analytical scale. Data were statistically analyzed with the Student's t test, and multiple comparisons were performed with Student-Newman-Keuls. Xylol and orange oil showed similar effects, with significant solubilization (P<0.05) of the tested cements. Endofill and Sealer 26 did not show any significant difference in solubilization at the two immersion times, whereas RoekoSeal and Intrafill showed a more pronounced solubility at 10 min. The lowest levels of solubilization occurred in RoekoSeal, Sealer 26, Endofill, and Intrafill. It is concluded that xylol and orange oil presented similar solvent effects with a significant solubility of the tested cements.

Effectiveness of different techniques for removing gutta-percha during retreatment

AIM

To evaluate the effectiveness of various techniques for removing filling material from root canals in vitro.

METHODOLOGY

Eighty extracted mandibular premolar teeth were selected for the study. The teeth were root filled using thermomechanical compaction of gutta-percha. After 8 months, the filling material was removed and canals were reinstrumented using the following techniques: group I - hand instrumentation with K-type files (SybronEndo, Orange, CA, USA); group II - K3 Endo System (SybronEndo); group III - M4 system (SybronEndo) with K-type files (SybronEndo); and group IV - Endo-gripper system (Moyco Union Broach, York, PA, USA) with K-type files (SybronEndo). The amount of filling debris remaining on root canal walls was assessed radiographically; the images were digitized and analysed using AutoCAD 2000 software. Total canal area, area of the cervical, middle and apical thirds, and area of remaining filling material were outlined by one operator. The ratios between these areas were calculated as percentages of remaining debris. Thereafter, data were analysed by means of one-way anova and the post-hoc Duncan test to identify differences between the four techniques.

RESULTS

Multiple comparisons of the percentages of remaining filling material in the entire canal did not reveal any significant differences between the methods of removal. However, when each third was analysed separately, significant differences for remaining debris were present between groups. The apical third had the most remaining material, whilst the cervical and middle thirds were significantly cleaner (P = 0.002). Comparison of the techniques revealed that teeth instrumented with K3 rotary instruments had a lower ratio of remaining filling material in the apical third (P = 0.012).

CONCLUSION

In the apical third, K3 rotary instruments were more efficient in removing gutta-percha filling material than the other techniques, which were equally effective for the other thirds.

The use of glass ionomer cements in both conventional and surgical endodontics

The capacity to bond to dental tissues, especially to dentine, their long-term fluoride release and their biocompatibility make glass ionomer cements (GICs) advantageous for use in endodontics, as well as in restorative dentistry. This review provides information on the basic properties of GICs, such as adhesion, antimicrobial effects and biocompatibility, particularly as they relate to use in endodontics. Indications for the use of GICs in endodontics are orthograde root canal sealing, root-end filling, repair of perforations and root resorption defects, treatment of vertical fractures and maintenance of the coronal seal. The paper includes a review on each of these indications. It is concluded that in spite of the critical handling characteristics and the inconclusive findings regarding sealing ability and antimicrobial activity, there is substantial evidence to confirm their satisfactory clinical performance. Both soft tissue and bone compatibility make them suitable for use during endodontic surgery.

Removal of gutta-percha from root canals using an Nd:YAG laser

AIM

To examine the use of an Nd:YAG laser in removing gutta-percha fillings from root canals when used in conjunction with eucalyptol, dimethylformamide (DMF) or no solvent.

METHODOLOGY

Root-canal fillings (sealer and gutta-percha) were removed with laser irradiation of 20 Hz/1.5 W from 30 roots randomly divided in three groups. In group 1, the solvent was eucalyptol; in group 2, the solvent was DMF; and in group 3, no solvent was used. Laser irradiation was performed until the temperature measured on the root surface increased by 4 degrees C over room temperature. The treatment was deemed complete when the apical foramen was reached with the optical fibre and a reamer. The samples were split longitudinally, and the area of remaining gutta-percha on the root-canal walls was determined with the aid of a computer program. The total number of laser pulses to achieve length and the highest temperature recorded was determined for each tooth. The results were statistically analysed using Student's t-test (P < 0.05) for independent samples.

RESULTS

The average temperature increase in group 1 was 9.17 +/- 0.56 degrees C; in group 2, 9.56 +/- 0.28 degrees C; and in group 3, 8.29 +/- 0.41 degrees C. The shortest time to achieve length was in group 3 (6.4 +/- 0.49 min), then in group 1 (6.7 +/- 0.85 min) and group 2 (7.05 +/- 0.79 min). The area of remaining gutta-percha was the largest in group 2 (6.13 +/- 5.76%), whilst the smallest was for group 3 (4.69 +/- 4.03%), but the difference was not statistically significant. The number of pulses was not statistically significant between the groups.

CONCLUSIONS

Use of an Nd:YAG laser alone is capable of softening gutta-percha. The addition of solvents did not improve the retreatment, either in terms of the time required for the procedure or in terms of the area of remaining gutta-percha on root-canal walls.

Effects of root canal sealers on vertical root fracture resistance of endodontically treated teeth

The aim of this study was to compare vertical forces at fracture of endodontically treated mandibular incisors obturated with different types of root canal sealer. Four groups of 10 teeth each were tested; group 1 served as positive and negative controls (five teeth each), and groups 2, 3, and 4 were obturated by lateral condensation with gutta-percha and AH Plus, Tubliseal, or Ketac-Endo, respectively. All teeth were loaded vertically using a plugger tip inserted into the canal space until fracture occurred; the load at fracture and the pattern of fracture were recorded. Statistical analysis was performed using a one-way analysis of variance and post hoc Scheffé test at the 95% level of confidence. Force at fracture of roots obturated with Ketac-Endo was significantly higher than those obturated with AH Plus and Tubliseal. Most fracture lines were in a buccolingual direction. The results suggested that Ketac-Endo strengthens endodontically treated roots and may be used for weak roots, which are likely to be susceptible to vertical root fracture.

A comparison of the relative efficacies of four hand and rotary instrumentation techniques during endodontic retreatment

AIM

The purpose of this study was to quantify the amount of remaining gutta-percha/scaler on the walls of root canals when two engine-driven instruments (Quantec and ProFile) and two hand instruments (K-file and Hedström file) were used to remove these materials. The amount of apically extruded debris and the time required for treatment were also recorded.

METHODOLOGY

One hundred extracted mandibular premolars were prepared using a modified step-back, flare technique and obturated with the lateral condensation technique. After repreparation with the test instruments, the specimens were cut transversally at the cervical, middle and apical thirds with steel discs and the three sections were split longitudinally. The amount of residual debris on the canal walls in each section was examined using a stereomicroscope.

RESULTS

In all groups the cervical and middle thirds showed no debris. In the apical third, obturating material was observed in some specimens. No statistically significant difference was found between the two groups for incidence of debris, although the Hedström group showed a greater number of samples with remaining gutta-percha/sealer. When analysing dirty specimens only, there was a statistically significant difference between the four groups (P < 0.01) with the Hedström group having significantly less length of canal wall with remaining obturation material than the Quantec group. There was no significant difference amongst the groups for weight of extruded debris. However, there was a significant difference amongst the groups for mean treatment time with the Hedström file group requiring significantly less time than the Quantec group (P < 0.001); no significant differences were found between the other groups. Six instruments fractured in the Quantec group, four in the ProFile group, two in the Hedström group and two in the K-type group.

CONCLUSIONS

The results showed that overall, all instruments may leave filling material inside the root canal. During retreatment there is a risk of instrument breakage, especially rotary instruments.

Dowel space preparation in root canals filled with glass ionomer cement

The aim of this study was to evaluate post space preparation difficulties in canals filled with Ketac Endo and with Grossman's sealer. Sixty-three single-rooted teeth were prepared using a step-back technique and were divided into four groups: group 1--canals were irrigated with 25% tannic acid and filled with Ketac Endo and a single-cone technique; group 2--canals were irrigated with 1% sodium hypochlorite and fillings done as in the previous group; group 3--canals were irrigated with 25% tannic acid and filled with Ketac Endo and one gutta-percha cone previously adapted with chloroform; and group 4--canals were irrigated with 1% sodium hypochlorite and filled with Grossman's sealer and a lateral condensation technique. After 72 h, canals post space were prepared using Peeso drills. The time required was measured in seconds and analyzed by Tukey multiple comparison test (level 5%). Post space preparation time for groups 1 to 3 was longer than for group 4 and longer for group 1 than for groups 2 to 4.

Apical leakage of a new glass ionomer root canal sealer

A new glass ionomer root canal sealer (Ketac-Endo) has been developed. The purpose of this study was to compare the apical leakage of Ketac-Endo and AH26 using two different filling techniques and a controlled vacuum procedure. Sixty-four extracted human maxillary anterior teeth were instrumented and divided into four groups of 15 roots each. The groups were obturated as follows: group 1, a single cone technique and Ketac-Endo; group 2, a lateral condensation technique and Ketac-Endo; group 3, a single cone technique and AH26; and group 4, a lateral condensation technique and AH26. After storage in 100% humidity at 37 degrees C for 1 wk, the root surfaces were coated with two layers of nail polish and sticky wax. All specimens were immersed in a vacuum flask containing 2% methylene blue dye solution. The air was evacuated with a vacuum pump. The roots were sectioned longitudinally, and the linear extent of dye penetration was measured. Statistical analysis revealed that there were no significant differences between any of the groups.

An in vitro evaluation of microleakage of a new root canal sealer

An in vitro dye leakage study was performed to compare the apical microleakage of Ketac-Endo root canal sealer with that of Roth's 801E and AH26 sealers. Sixty-four single-rooted human teeth were instrumented and randomly divided into four groups. Three groups were obturated with laterally condensed gutta-percha and either Roth's 801E, AH26, or Ketac-Endo as the sealer. A fourth group was obturated using a single master cone and the Ketac-Endo sealer. The teeth were suspended in 1% methylene blue dye for 6 days. The teeth were then longitudinally sectioned and evaluated for linear apical dye penetration. In general, Ketac-Endo root canal sealer showed greater dye penetration than Roth's 801E and AH26. There was no statistical difference in leakage between the laterally condensed Ketac-Endo group and the single-cone-obturated Ketac-Endo group.

Apical and coronal seal of roots obturated with a dentine bonding agent and resin

The efficacy of sealing root canal systems with a dentine bonding agent and resin cement was compared with that of a glass ionomer sealer. Scanning electron microscopic examination of the bonding agent-dentine interface was also performed. The root canals of 50 single rooted teeth with mature apices were prepared chemomechanically and the smear layer removed with 17% REDTA and 5.25% NaOCl. Specimens were divided into two groups of 24 teeth each. One group had the dentine conditioned with a 10:3 citric acid-ferric chloride solution and obturated with the dentine bonding agent and resin, radiopaque C & B Metabond. The other group was obturated with the glass ionomer sealer, Ketac-Endo and a single cone of gutta-percha. After immersion in Indian ink for 90 h, the teeth were cleared and the quality of the apical and coronal seal was assessed using India ink dye penetration. There was a significantly better seal in both the apical and coronal directions when using the dentine bonding agent and resin obturation material. Scanning electron microscopic examination of the demineralized dentine and the C & B Metabond interface revealed the presence of the characteristic hybrid layer along with microtags of resin penetrating deep into the dentine tubules.

Assessment of coronal leakage in teeth root filled with gutta-percha and a glass of ionomer root canal sealer

The effect on coronal leakage of the use of either a single gutta-percha cone or cold lateral condensation of gutta-percha, with a glass ionomer sealer cement was studied. In addition, the effect of the removal of the smear layer was also determined. Eighty-eight single-rooted teeth were prepared chemomechanically using hand files, with the balanced force technique. Lubrication was provided by either Hibiscrub (maintaining the smear layer) or an EDTA-containing paste (to remove the smear layer). Copious irrigation was carried out with 2.2% sodium hypochlorite. The teeth were allocated randomly to four groups of 20 teeth each, the remaining eight teeth served as controls. Two groups of teeth, one with and one without smear layer, were obturated with either a single gutta-percha cone or cold laterally condensed gutta-percha, with Ketac Endo as the sealer. The teeth were stored for 6 weeks, thermocycled, and the extent of coronal leakage determined for each group after immersion in India ink for 90 h. The teeth were demineralized, dehydrated and immersed in methyl salicylate, which rendered them transparent. Linear measurement of maximum dye penetration was recorded. The mean depth (+SD) of leakage for the groups in which the smear layer was left intact was 1.68 mm (+0.38) for the single cone (A1) and 2.29 mm (+1.58) for lateral condensation (B1). When the smear layer was removed the mean depth of leakage for the single cone group (A2) was 2.04 mm (+0.73) and 2.37 mm (+1.70) for the laterally condensed group (B2). There was no significant difference in coronal leakage between the groups (P > 0.05).