Influence of different types of automated devices on the shaping ability of rotary nickel-titanium FlexMaster instruments

A review of instrumentation kinematics of engine-driven nickel-titanium instruments

Over the years, NiTi alloys have become indispensable materials in endodontic treatment. With technological advancements in metallurgy, manufacturers have attempted to produce instruments with enhanced features. In parallel with these developments, endodontic motors have undergone improvements in terms of torque control and kinematics that are adjustable in different directions. This review presents an overview of the advancements in instrumentation kinematics and the effect of instrumentation kinematics on root canal shaping procedures and instrument performance. The literature search for this narrative review was conducted in Google Scholar, Scopus, PubMed and Web of Science using the keywords 'kinematics and endodontics' and 'reciprocation and endodontics'. In addition, historical literature was searched using the keyword 'nickel-titanium and endodontics'. Overall, 143 articles were included up to 2015.

Shaping ability of reciproc and TF adaptive systems in severely curved canals of rapid microCT-based prototyping molar replicas

Objective:

To evaluate the shaping ability of Reciproc and Twisted-File Adaptive systems in rapid prototyping replicas.

Material and Methods:

Two mandibular molars showing S-shaped and 62-degree curvatures in the mesial root were scanned by using a microcomputed tomography (μCT) system. The data were exported in the stereolitograhic format and 20 samples of each molar were printed at 16 µm resolution. The mesial canals of 10 replicas of each specimen were prepared with each system. Transportation was measured by overlapping radiographs taken before and after preparation and resin thickness after instrumentation was measured by μCT.

Results:

Both systems maintained the original shape of the apical third in both anatomies (P>0.05). Overall, considering the resin thickness in the 62-degree replicas, no statistical difference was found between the systems (P>0.05). In the S-shaped curvature replica, Reciproc significantly decreased the thickness of the resin walls in comparison with TF Adaptive.

Conclusions:

The evaluated systems were able to maintain the original shape at the apical third of severely curved mesial canals of molar replicas.

Comparison of air-driven vs electric torque control motors on canal centering ability by ProTaper NiTi rotary instruments

AIM

Cleaning and shaping is one of the most important phases in root canal therapy. Various rotary NiTi systems minimize accidents and facilitate the shaping process. Todays NiTi files are used with air-driven and electric handpieces. This study compared the canal centering after instrumentation using the ProTaper system using Endo IT, electric torque-control motor, and NSK air-driven handpiece.

MATERIALS AND METHODS

This ex vivo randomized controlled trial study involved 26 mesial mandibular root canals with 10 to 35° curvature. The roots were randomly divided into 2 groups of 13 canals each. The roots were mounted in an endodontic cube with acrylic resin, sectioned horizontally at 2, 6 and 10 mm from the apex and then reassembled. The canals were instrumented according to the manufacturer's instructions using ProTaper rotary files and electric torque-control motors (group 1) or air-driven handpieces (group 2). Photographs of the cross-sections included shots before and after instrumentation, and image analysis was performed using Photoshop software. The centering ability and canal transportation was also evaluated. Repeated measurement and independent t-test provided statistical analysis of canal transportation.

RESULTS

The comparison of the rate of transportation toward internal or external walls between the two groups was not statistically significant (p = 0.62). Comparison of the rate of transportation of sections within one group was not significant (p = 0.28).

CONCLUSION

Use of rotary NiTi file with either electric torquecontrol motor or air-driven handpiece had no effect on canal centering.

CLINICAL SIGNIFICANCE

NiTi rotary instruments can be used with air-driven motors without any considerable changes in root canal anatomy, however it needs the clinician to be expert.

The influence of various automated devices on the shaping ability of Mtwo rotary nickel-titanium instruments

AIM

To compare the shaping ability of Mtwo rotary nickel-titanium instruments in simulated curved canals and in curved canals of extracted teeth when set into permanent rotation with two different torque-limited automated devices.

METHODOLOGY

Root canal instrumentation was performed with two different torque-limited automated devices (Mtwo direct handpiece and Endo IT motor) using Mtwo rotary nickel-titanium instruments up to size 35. Simulated canals: 28 degrees and 35 degrees curved canals in resin blocks (n = 20 canals in each group) were prepared. Pre- and post-instrumentation images were recorded and assessment of canal shape was completed with a computer image analysis program. Extracted teeth: a total of 40 curved root canals were divided into two groups, which were balanced with respect to the angle and the radius of canal curvature. Straightening of the canal curvatures was determined with a computer image analysis program. Incidence of canal aberrations, preparation time, changes of working length and instrument failures were recorded both in simulated and real canals and were analysed using the t-test and a chi-square test.

RESULTS

In simulated canals, instrumentation with Endo IT was significantly faster than with Mtwo direct (P < 0.05). No significant differences between the two devices were noted when all other parameters were assessed (P > 0.05). Only one instrument separated (Mtwo direct) during the enlargement of 28 degrees curved simulated canals. All systems maintained working distance well.

CONCLUSIONS

Both systems respected original root canal curvature well and were safe, indicating that the Mtwo direct handpiece is suitable for preparing curved root canals with the Mtwo instruments.

Comparison of the shaping ability of RaCe and FlexMaster rotary nickel-titanium systems in simulated canals

The aim of this study was to compare the shaping ability of RaCe and FlexMaster rotary nickel-titanium instruments in simulated canals. A total of 80 canals with four different shapes were prepared with either RaCe or FlexMaster instruments. Pre- and postoperative images of each canal were recorded and combined using image analysis software. The development of canal aberrations and transportation was assessed. There was a significant difference (p < 0.001) between the systems for time of preparation to apical size 30, .06 taper; FlexMaster instruments took on average 1.86 min and RaCe 1.66 min. One RaCe and two FlexMaster instruments fractured. No zips, elbows, or danger zones were created. One perforation and eight outer widenings were created using FlexMaster instruments; RaCe instruments created two outer widenings. No differences were found between the instruments for direction of transportation. RaCe and FlexMaster nickel-titanium instruments prepared canals rapidly with few aberrations.