Immunohistochemical identification of type I and type III collagen and chondroitin sulphate in human pre-dentine: a correlative FEI-SEM/TEM study

Investigation of in vitro odonto/osteogenic capacity of cannabidiol on human dental pulp cell

INTRODUCTION

Vital pulp treatment (VPT) maintains tooth vitality with certain dental materials by protecting pulp from noxious stimulation and promoting repair through enhancing cell proliferation/differentiation, migration, and inducing odontogenesis. As a non-psychotropic cannabis constituent, cannabidiol (CBD) possesses the properties of analgesic, anti-inflammation, and osteogenesis. Therefore, we hypothesize that CBD may induce the odonto/osteogenesis of human dental pulp cells (HDPCs), a critical feature using as effective pulp capping agent for VPT.

MATERIALS AND METHODS

In this in vitro study, the cytotoxicity of CBD on HDPCs was determined by MTT assay. Scratch assay was performed to analyze HDPC migration. The biomineralization was examined by collagen synthesis and calcium nodule formation and related odonto/osteogenic and angiogenic genes. Cannabinoid receptor (CB) specificity was evaluated by Western blotting and Von Kossa staining using specific antagonists AM251 for cannabinoid receptor 1 (CB1) and AM 630 targeted at cannabinoid receptor 2 (CB2). In addition, the underlying molecular mechanism of CBD-induced biomineralization were investigated by examining CB-dependent MAPK signaling pathways.

RESULTS

CBD demonstrated bi-phasic effects on HDPC viability in tested concentrations. We found CBD significantly promoted cell migration, enhanced collagen synthesis and mineralized deposits in HDPCs when treated by 1 μM CBD supplemented in the differentiation media. RT-PCR revealed CBD increased the expression of angiogenic and odontogenic genes, such as DSPP, DMP-1, OPN, ALP, Runx2, VEGFR1 and ICAM-1. These effects were via MAPK activation in a manner mainly mediated by CB2.

CONCLUSION

The results from this study suggested that CBD can induce odonto/osteogenesis from HDPCs and has the potential to develop new therapeutics in VPT in dentistry.

Glycosaminoglycans accelerate biomimetic collagen mineralization in a tissue-based in vitro model

Mammalian teeth are attached to the jawbone through an exquisitely controlled mineralization process: unmineralized collagen fibers of the periodontal ligament anchor directly into the outer layer of adjoining mineralized tissues (cementum and bone). The sharp interface between mineralized and nonmineralized collagenous tissues makes this an excellent model to study the mechanisms by which extracellular matrix macromolecules control collagen mineralization. While acidic phosphoproteins, localized in the mineralized tissues, play key roles in control of mineralization, the role of glycosaminoglycans (GAGs) is less clear. As several proteoglycans are found only in the periodontal ligament, it has been hypothesized that these inhibit mineralization of collagen in this tissue. Here we used an in vitro model based on remineralization of mouse dental tissues to determine the role of matrix GAGs in control of mineralization. GAGs were selectively removed from demineralized mouse periodontal sections via enzymatic digestion. Proteomic analysis confirmed that enzymatic GAG removal does not significantly alter protein content. Analysis of remineralized tissue sections by transmission electron microscopy (TEM) shows that GAG removal reduced the rate of remineralization in mineralized tissues compared to the untreated control, while the ligament remained unmineralized. Protein removal with trypsin also reduced the rate of mineralization, but to a lesser extent than GAG removal, despite a much larger effect on protein content. These results indicate that GAGs promote mineralization in mineralized dental tissues rather than inhibiting mineral formation in the ligament, which may have broader implications for understanding control of collagen mineralization in connective tissues.

Dentin on the nanoscale: Hierarchical organization, mechanical behavior and bioinspired engineering

OBJECTIVE

Knowledge of the structural organization and mechanical properties of dentin has expanded considerably during the past two decades, especially on a nanometer scale. In this paper, we review the recent literature on the nanostructural and nanomechanical properties of dentin, with special emphasis in its hierarchical organization.

METHODS

We give particular attention to the recent literature concerning the structural and mechanical influence of collagen intrafibrillar and extrafibrillar mineral in healthy and remineralized tissues. The multilevel hierarchical structure of collagen, and the participation of non-collagenous proteins and proteoglycans in healthy and diseased dentin are also discussed. Furthermore, we provide a forward-looking perspective of emerging topics in biomaterials sciences, such as bioinspired materials design and fabrication, 3D bioprinting and microfabrication, and briefly discuss recent developments on the emerging field of organs-on-a-chip.

RESULTS

The existing literature suggests that both the inorganic and organic nanostructural components of the dentin matrix play a critical role in various mechanisms that influence tissue properties.

SIGNIFICANCE

An in-depth understanding of such nanostructural and nanomechanical mechanisms can have a direct impact in our ability to evaluate and predict the efficacy of dental materials. This knowledge will pave the way for the development of improved dental materials and treatment strategies.

CONCLUSIONS

Development of future dental materials should take into consideration the intricate hierarchical organization of dentin, and pay particular attention to their complex interaction with the dentin matrix on a nanometer scale.

Immunocytochemical detection of dentin matrix proteins in primary teeth from patients with dentinogenesis imperfecta associated with osteogenesis imperfecta

Dentinogenesis imperfecta determines structural alterations of the collagen structure still not completely elucidated. Immunohisto-chemical analysis was used to assay type I and VI collagen, various non-collagenous proteins distribution in human primary teeth from healthy patients or from patients affected by type I dentinogenesis imperfecta (DGI-I) associated with osteogenesis imperfecta (OI). In sound primary teeth, an organized well-known ordered pattern of the type I collagen fibrils was found, whereas atypical and disorganized fibrillar structures were observed in dentin of DGI-I affected patients. Expression of type I collagen was observed in both normal and affected primary teeth, although normal dentin stained more uniformly than DGI-I affected dentin. Reactivity of type VI collagen was significantly lower in normal teeth than in dentin from DGI-I affected patients (P<0.05). Expressions of dentin matrix protein-1 (DMP1) and osteopontin (OPN) were observed in both normal dentin and dentin from DGI-I affected patients, without significant differences, being DMP1 generally more abundantly expressed. Immuno labeling for chondroitin sulfate (CS) and biglycan (BGN) was weaker in dentin from DGI-I-affected patients compared to normal dentin, this decrease being significant only for CS. This study shows ultra-structural alterations in dentin obtained from patients affected by DGI-I, supported by immunocytochemical assays of different collagenous and non-collagenous proteins.

Dentin biomodification: strategies, renewable resources and clinical applications

OBJECTIVES

The biomodification of dentin is a biomimetic approach, mediated by bioactive agents, to enhance and reinforce the dentin by locally altering the biochemistry and biomechanical properties. This review provides an overview of key dentin matrix components, targeting effects of biomodification strategies, the chemistry of renewable natural sources, and current research on their potential clinical applications.

METHODS

The PubMed database and collected literature were used as a resource for peer-reviewed articles to highlight the topics of dentin hierarchical structure, biomodification agents, and laboratorial investigations of their clinical applications. In addition, new data is presented on laboratorial methods for the standardization of proanthocyanidin-rich preparations as a renewable source of plant-derived biomodification agents.

RESULTS

Biomodification agents can be categorized as physical methods and chemical agents. Synthetic and naturally occurring chemical strategies present distinctive mechanism of interaction with the tissue. Initially thought to be driven only by inter- or intra-molecular collagen induced non-enzymatic cross-linking, multiple interactions with other dentin components are fundamental for the long-term biomechanics and biostability of the tissue. Oligomeric proanthocyanidins show promising bioactivity, and their chemical complexity requires systematic evaluation of the active compounds to produce a fully standardized intervention material from renewable resource, prior to their detailed clinical evaluation.

SIGNIFICANCE

Understanding the hierarchical structure of dentin and the targeting effect of the bioactive compounds will establish their use in both dentin-biomaterials interface and caries management.

Vital pulp therapy

Vital pulp therapy is performed to preserve the health status of the tooth and its ultimate position in the arch. These procedures are performed routinely in primary and permanent teeth. This review is divided into 2 parts: the first aims to illustrate the basic biology of the pulp and the effects on the pulp due to various procedures; the second focuses on the clinical aspects of treatment and the use of various dental materials during different vital pulp therapy procedures performed in the primary and permanent teeth.

Matrix metalloproteinase-2 expression induced by two different adhesive systems on human pulp fibroblasts

INTRODUCTION

This study evaluated the expression of matrix metalloproteinase-2 (MMP-2) in primary cultures of human pulp fibroblasts (HPFs) when exposed to extracts from dentin-bonding systems.

METHODS

Polymerized resin disks of the bonding agent of a 2-step self-etch adhesive (TechBond, Isasan, Rovello Porro, Italy) or of the primer/bonding agent a 2-step etch-and-rinse adhesive (Optibond Solo; Sybron-Kerr, Orange, CA) were immersed in HPF culture medium for 24 or 96 hours. HPFs were incubated in the adhesive-conditioned or control (untreated) culture medium for 24 hours. Western blot and immunofluorescence analyses were performed to assay MMP-2 expression.

RESULTS

MMP-2 expression levels in HPFs cultured for 24 hours in culture medium were similar in both the control and experimental media groups showing a faint band at 67 kDa. Conversely, the HPFs incubated in the medium that contain polymerized resin disks for 96 hours showed increased MMP-2 expression compared with the untreated medium. The self-etch adhesive displayed the most pronounced induction of MMP-2 expression. These findings were confirmed by immunofluorescence analysis.

CONCLUSIONS

HPFs display increased MMP-2 expression after 96 hours of conditioning of the HPF culture medium with polymerized disks of dentin bonding systems. This MMP-2 expression/activation may represent a defence mechanism exhibited by HPFs towards monomers eluted from the dentin bonding systems.

Technical advances in the sectioning of dental tissue and of on-section cross-linked collagen detection in mineralized teeth

Immunohistochemical detection of cross-linked fibrillar collagens in mineralized tissues is much desired for exploring the mechanisms of biomineralization in health and disease. Mineralized teeth are impossible to section when embedded in conventional media, thus limiting on-section characterization of matrix proteins by immunohistochemistry. We hypothesized that by using an especially formulated acrylic resin suitable for mineralized dental tissues, not only sectioning of teeth would be possible, but also our recently developed immunofluorescence labeling technique would be amenable to fully calcified tissues for characterization of dentinal fibrillar collagens, which remains elusive. The hypothesis was tested on fixed rodent teeth embedded in Technovit 9100 New. It was possible to cut thin (1 mum) sections of mineralized teeth, and immunofluorescence characterization of cross-linked type I fibrillar collagen was selected due to its abundance in dentine. Decalcified samples of teeth embedded in paraffin wax were also used to compare immunolabeling from either method using the same immunoreagents in equivalent concentrations. In the decalcified tissue sections, type I collagen labeling in the dentine along the tubules was "patchy" and the signal in the predentine was very weak. However, enhanced signal in mineralized samples with type I collagen was detected not only in the predentine but also at the limit between intertubular dentine, within the elements of the enamel organ and subgingival stroma. This report offers advances in sectioning mineralized dental tissues and allows the application of immunofluorescence not only for on-section protein detection but importantly for detecting cross-linked fibrous collagens in both soft and mineralized tissue sections.

Immunohistochemical and biochemical assay of versican in human sound predentine/dentine matrix

Aim of this study was to investigate the distribution of versican proteoglycan within the human dentine organic matrix by means of a correlative immunohistochemical analysis with field emission in-lens scanning electron microscope (FEI-SEM), transmission electron microscope (TEM), fluorescence microscope (FM) and biochemical assay. Specimens containing dentine and predentine were obtained from non carious human teeth and divided in three groups: 1) FEI-SEM group: sections were exposed to a pre-embedding immunohistochemical procedure; 2) TEM group: specimens were fixed, demineralised, embedded and submitted to a post-embedding immunohistochemical procedure; 3) FM group: sections mineralised and submitted to a pre-embedding immunohistochemical procedure with fluorescence labelling. Specimens were exposed to two different antibodies to assay distribution of versican fragments and whole versican molecule.Western Blotting analysis of dentine and pulp extracts was also performed. The correlative FEI-SEM,TEM and FM analysis revealed positive immunoreaction for versican fragments both in predentine and dentine, while few gold particles identifying the whole versican molecule were found in predentine only under TEM. No labelling of versican whole molecule was detected by FEI-SEM and FM analysis. The immunoblotting analysis confirmed the morphological findings. This study suggests that in fully developed human teeth versican fragments are significant constituents of the human dentine and predentine organic matrix, while versican whole molecule can be visualised in scarce amount within predentine only. The role of versican fragments within human dentine organic matrix should be further elucidated.

Adhesion to chondroitinase ABC treated dentin

Dentin bonding relies on complete resin impregnation throughout the demineralised hydrophilic collagen mesh. Chondroitin sulphate-glycosaminoglycans are claimed to regulate the three-dimensional arrangement of the dentin organic matrix and its hydrophilicity. The aim of this study was to investigate bond strength of two etch-and-rinse adhesives to chondroitinase ABC treated dentin. Human extracted molars were treated with chondroitinase ABC and a double labeling immunohistochemical technique was applied to reveal type I collagen and chondroitin 4/6 sulphate distribution under field emission in-lens scanning electron microscope. The immunohistochemical technique confirmed the effective removal of chondroitin 4/6 sulphate after the enzymatic treatment. Dentin surfaces exposed to chondroitinase ABC and untreated specimens prepared on untreated acid-etched dentin were bonded with Adper Scotchbond Multi-Purpose or Prime and Bond NT. Bonded specimens were submitted to microtensile testing and nanoleakage interfacial analysis under transmission electron microscope. Increased mean values of microtensile bond strength and reduced nanoleakage expression were found for both adhesives after chondroitinase ABC treatment of the dentin surface. Adper Scotchbond Multi-Purpose increased its bond strength about 28%, while bonding made with Prime and Bond NT almost doubled (92% increase) compared to untreated specimens. This study supports the hypothesis that adhesion can be enhanced by removal of chondroitin 4/6 sulphate and dermatan sulphate, probably due to a reduced amount of water content and enlarged interfibrillar spaces. Further studies should validate this hypothesis investigating the stability of chondroitin 4/6 and dermatan sulphate-depleted dentin bonded interface over time.