Potential systematic error in laboratory experiments on microbial leakage through filled root canals: an experimental study

Confocal laser scanning microscopic analysis of the penetration of an epoxy resin-based sealer into dentinal tubules after calcium hydroxide dressing

This study assessed the penetration of an epoxy resin-based sealer into dentinal tubules of root canals previously medicated with calcium hydroxide. Sixteen palatal root canals of upper molars were instrumented and distributed into two groups: (G1) root canals medicated with calcium hydroxide and obturated after its removal; (G2) root canals obturated without the use of dressing. Sealer mixed with rhodamine B provided fluorescence for confocal laser scanning microscopy. Measurements of area and linear penetration of the sealer were assessed in three thirds by ImageJ software. The data were statistically compared by Kruskal-Wallis, Dunn's and Mann-Whitney U tests (P < 0.01). The calcium hydroxide decreased the penetration of the sealer. The coronal and middle thirds had similar areas and linear penetrations in both groups, whereas the apical third had less penetration. In conclusion, the penetration of the epoxy resin-based sealer is influenced by the calcium hydroxide dressing used between appointments.

The Invasion of Bacterial Biofilms into the Dentinal Tubules of Extracted Teeth Retrofilled with Fluorescently Labeled Retrograde Filling Materials

In this study, we evaluated the invasion of bacteria into the dentinal tubules of retrofilled extracted human teeth, and the influence of different fluorescently labeled retrograde filling materials on the bacterial invasion and viability, by means of confocal laser scanning microscopy (CLSM). The root apices of extracted teeth were cut, prepared, and filled retrogradely using either intermediate restorative material (IRM), mineral trioxide aggregate (MTA), or Biodentine. The roots were filled with Enterococcus faecalis bacteria from their coronal part for 21 days. Then, 3-mm-long apical segments were cut to get root axial slices, and the bacteria were fluorescently stained and evaluated by CLSM. Bacterial penetration into the dentinal tubules favored the bucco-lingual directions. The filling materials penetrated up to 957 µm into the tubuli, and the bacteria, up to 1480 µm (means: 130 and 167 μm, respectively). Biodentine fillings penetrated less and the associated bacteria penetrated deeper into the tubuli compared to MTA or IRM (p = 0.004). Deeper filling penetration was associated with shallower penetration of both dead and live, or live alone, bacteria (p = 0.015). In conclusion, the current study enables better understanding of the microbiological–pathological course after endodontic surgical procedures. It was found that even with retrograde fillings, bacteria invade deep into the dental tubules, where deeper filling penetration prevents deeper penetration of the bacteria and adversely affects the viability of the bacteria.

Physicochemical and Antibacterial Properties of Novel, Premixed Calcium Silicate-Based Sealer Compared to Powder-Liquid Bioceramic Sealer

The aim of this study was to compare the physicochemical properties, filling ability, and antibacterial activity of a premixed calcium silicate-based sealer to those of a powder–liquid bioceramic sealer. Ceraseal (CS) and BioRoot (BR) materials were analyzed using scanning electron microscopy and energy-dispersive X-ray spectroscopy at 7 and 14 d of immersion in distilled water. The filling ability of the two sealers as well as the water contact angle, solubility, flow, roughness, crystalline microstructure, pH, and compressive strength were also evaluated. The antibacterial activity was assessed through an agar diffusion as well as through direct tests. All the results were statistically analyzed using one-way or two-way analysis of variance tests. Statistically significant lower void percentages were observed for CS at 2 and 8 mm from the working length (WL) compared to those for the BR group, whilst no significant difference was observed at 5 mm from the WL. BR sealer showed higher alkaline pH, rougher surface, lower water contact angle values, lower flowability, and higher solubility compared to CS. BR showed globular and needle-like crystalline microstructure, whilst CS had globular and flower-like crystalline microstructure up to 72 h. No statistical difference was found for the compressive strength between the two sealers. BR and CS showed no antibacterial effect against Enterococcus faecalis after 3 h, whilst both sealers showed antibacterial capacity after 24 and 72 h. BR demonstrated higher antibacterial activity after 24 h. In conclusion, the use of bioceramic sealers may play an important role in controlling bacterial growth. Moreover, CS may have superior filling ability and lower solubility than the BioRoot sealer due to its specific chemical composition and mixing method.

Endodontic-Like Oral Biofilms as Models for Multispecies Interactions in Endodontic Diseases

Oral bacteria possess the ability to form biofilms on solid surfaces. After the penetration of oral bacteria into the pulp, the contact between biofilms and pulp tissue may result in pulpitis, pulp necrosis and/or periapical lesion. Depending on the environmental conditions and the availability of nutrients in the pulp chamber and root canals, mainly Gram-negative anaerobic microorganisms predominate and form the intracanal endodontic biofilm. The objective of the present study was to investigate the role of different substrates on biofilm formation as well as the separate and collective incorporation of six endodontic pathogens, namely Enterococcus faecalis, Staphylococcus aureus, Prevotella nigrescens, Selenomonas sputigena, Parvimonas micra and Treponema denticola into a nine-species "basic biofilm". This biofilm was formed in vitro as a standard subgingival biofilm, comprising Actinomyces oris, Veillonella dispar, Fusobacterium nucleatum, Streptococcus anginosus, Streptococcus oralis, Prevotella intermedia, Campylobacter rectus, Porphyromonas gingivalis, and Tannerella forsythia. The resulting endodontic-like biofilms were grown 64 h under the same conditions on hydroxyapatite and dentin discs. After harvesting the endodontic-like biofilms, the bacterial growth was determined using quantitative real-time PCR, were labeled using fluorescence in situ hybridization (FISH) and analyzed by confocal laser scanning microscopy (CLSM). The addition of six endodontic pathogens to the "basic biofilm" induced a decrease in the cell number of the "basic" species. Interestingly, C. rectus counts increased in biofilms containing E. faecalis, S. aureus, P. nigrescens and S. sputigena, respectively, both on hydroxyapatite and on dentin discs, whereas P. intermedia counts increased only on dentin discs by addition of E. faecalis. The growth of E. faecalis on hydroxyapatite discs and of E. faecalis and S. aureus on dentin discs were significantly higher in the biofilm containing all species than in the "basic biofilm". Contrarily, the counts of P. nigrescens, S. sputigena and P. micra on hydroxyapatite discs as well as counts of P. micra and T. denticola on dentin discs decreased in the all-species biofilm. Overall, all bacterial species associated with endodontic infections were successfully incorporated into the standard multispecies biofilm model both on hydroxyapatite and dentin discs. Thus, future investigations on endodontic infections can rely on this newly established endodontic-like multispecies biofilm model.

Efficacy of Mineral Trioxide Aggregate and Biodentine as Apical Barriers in Immature Permanent Teeth: A Microbiological Study

Aim

To compare the bacterial leakage of mineral trioxide aggregate (MTA) and biodentine when used as an apical plug in immature permanent teeth.

Materials and methods

It was a randomized double-blind in vitro study. A total of 60 teeth were divided into 2 groups of MTA and biodentine, which were further divided into 2 subgroups (n = 30) each based on the apical plug thickness of 2 and 4 mm. The teeth were cleaned and shaped; root-end resection and canal preparation were done. Mineral trioxide aggregate and biodentine were mixed and filled as apical plugs of 2 or 4 mm thickness. Enterococcus faecalis was used to assess the bacterial leakage of the filled samples.

Statistical analysis

The comparison between the two groups was done by Chi-square test for categorical data. All p values <0.05 were considered as statistically significant.

Results

A 4 mm apical plug of biodentine showed the least amount of bacterial leakage followed by 2 mm MTA and 4 mm MTA. A 2 mm apical plug of biodentine showed the maximum bacterial leakage. But this was not statistically significant over a period of 3 months. There was a statistically significant difference (p value = 0.042) among the total number of samples that leaked in the 2 and 4 mm biodentine group.

Conclusion

Mineral trioxide aggregate and biodentine had a similar apical sealing ability. The apical sealing ability of biodentine at 4 mm thickness was greater than 2 mm thickness.

Clinical significance

The apical leakage of the materials used in apexification is one of the main causes of endodontic failures in immature necrotic teeth. Materials like MTA and biodentine have overcome various drawbacks of calcium hydroxide as apexification material. The thickness of the apical plug plays an important role in preventing any microorganism from entering the periapical area, hence maintaining an adequate seal.

How to cite this article

Abbas A, Kethineni B, Puppala R, et al. Efficacy of MTA and Biodentine as Apical Barriers in Immature Permanent Teeth: A Microbiological Study. Int J Clin Pediatr Dent 2020;13(6):656-662.

The effect of smear layer removal on E. faecalis leakage and bond strength of four resin-based root canal sealers

BACKGROUND

The aim of the study was to assess bacterial sealability and bonding ability of methacrylate-based Resilon (RS, SybronEndo), Endo Rez (ER, Ultradent Products Inc), and epoxy-based AH Plus (AH, Dentsply/DeTrey), MTA Fill Apex (MTAF, Angelus Soluções Odontológicas) root canal sealers, and the effect of the smear layer removal on the sealability.

METHODS

One hundred thirty root segments were instrumented up to apical size #60 and rinsed with 2.5% NaOCl. Half of the roots were rinsed with 5ml 17% EDTA to remove the smear layer. All the roots were filled with AH, ER, MTAF sealers and gutta-percha, or RS with Resilon cones. After storage at 37°C for 7 days the samples were mounted into bacterial leakage assay for 50 days. Another 100 roots were instrumented and rinsed as described above, split longitudinally, cut into the cervical, middle and apical parts. The sealers were injected through the plastic mould on the dentin surface. After 7 days of incubation at 37°C, bond strength was tested using a notched-edge test fixture (Crosshead, Ultradent Products Inc.) and a universal testing machine (Lloyd Instruments).

RESULTS

AH revealed the longest mean time for bacterial resistance by 29.4 and 36.8 days (with and without smear layer, respectively) followed by RS (15.1 and 24.7 days, respectively). The difference between materials was significant (p<0.001). Bond strength values ranged from 0.2± 0.1 to 3.5± 0.7 MPa and increased from the apical to the cervical third. In the apical third, AH showed the highest mean (SD) bond values 1.4 (0.4) MPa and 1.7 (0.6) MPa (with and without smear, respectively, followed by RS, 0.5 (0.1) MPa and 0.8 (0.1) MPa, respectively. The difference between materials was significant (p=0.001).

CONCLUSION

The effect of the smear layer removal on the sealability was material-dependent.

Sealing Ability of Alkaline Endodontic Cements versus Resin Cements

Penetration of oral bacteria through root fillings leads to their long term failure. Dimensionally stable alkaline cements have been developed. A saliva challenge model was used to compare resistance to bacterial penetration of these alkaline cements to conventional root fillings that combine gutta percha (GP) with epoxy resin sealers. A sample of 140 human roots with single straight canals prepared to standard length and canal size were obturated with mineral trioxide aggregate (MTA) (Nex MTA or MTAmix), with an alkaline calcium hydroxide hard setting cement (Supercal), or with GP and a resin cement (either AH-Plus or Zirmix). Negative control roots were sealed with wax, while positive controls were left open. The test assemblies were gamma sterilised, then the coronal root face was exposed daily to fresh stimulated human saliva diluted in broth. Bacterial penetration was determined by assessing growth in sterile brain-heart infusion (BHI) medium in contact with the root apex. Using Kaplan–Meier survival analysis, in order of performance from highest to lowest: Negative control, Supercal, Nex MTA, Zirmix, MTAmix, GP + AH-Plus, and the positive control. In addition, statistically significant differences were noted between Supercal and AH-Plus, and between the two MTA cements. It can be concluded that alkaline cements, particularly Supercal, can show considerable resistance to bacterial penetration from constant saliva challenge, and provide superior sealing ability in comparison to resin cements. While this property is due mostly to dimensional stability, the release of hydroxide ions could be a contributing factor to impaired bacterial survival, and this aspect should be explored further.

Comparative evaluation of the apical sealing ability of a ceramic based sealer and MTA as root-end filling materials - An in-vitro study

Background

The present study was aimed to evaluate and compare the apical sealing ability of two endodontic root-end filling materials namely, iRoot SP (ceramic based) and ProRoot MTA using the bacterial leakage system.

Material and Methods

A total of fifty recently extracted, single rooted teeth with a single straight canal were selected for the study. The teeth were chemo mechanically prepared. The apical 3mm of the root was resected and root end cavities were prepared. The teeth were randomly divided into two groups of twenty teeth each for the experimental root end filling materials namely, iRoot SP and ProRoot MTA. A two-chamber model was constructed using pippeter tips and plastic vials. The pipetter tips with the teeth were suspended in these caps and the entire assembly was reattached to the vial. The upper chamber was seeded withEnterococcus faecalis. An Enterococci-selective broth was used in the lower chamber. Leakage was assessed for 90 days and compared using survival statistics.

Results

The ProRoot MTA filled root end samples leaked within 30-72 days. The iRoot SP filled root end samples leaked within 51-69 days.

Conclusions

Under the parameters of this study, it can be concluded that all the tested materials showed significant apical sealing ability as root-end filling materials over a period of 90 days. iRoot SP exhibited the most effective apical sealing ability as compared to ProRoot MTA.

Key words:Apical sealing ability, Bacterial leakage, iRoot SP, ProRoot MTA, Root-end filling.

Bacterial colonization in the apical part of extracted human teeth following root-end resection and filling: a confocal laser scanning microscopy study

OBJECTIVES

The purpose of this study was to evaluate Enterococcus faecalis colonization at the apical part of root canals following root-end resection and filling using confocal laser scanning microscopy (CLSM).

MATERIALS AND METHODS

The apical 3-mm root-ends of 55 extracted single rooted human teeth were resected, and 3-mm retrograde cavities were prepared and filled using either mineral trioxide aggregate (MTA), intermediate restorative material (IRM), or Biodentine (n = 10 each); 25 teeth served as controls. The roots were placed in an experimental model, sterilized, and coronally filled with E. faecalis bacterial suspension for 21 days. Then, the apical 3-mm segments were cut to get two slabs (coronal and apical). The slabs were stained using LIVE/DEAD BacLight Bacterial Viability Kit and evaluated using CLSM.

RESULTS

The fluorescence-stained areas were larger in the bucco-lingual directions compared with the mesio-distal directions (p < 0.05). The mean and maximal depths of bacterial colonization into the dentinal tubules were 755 and 1643 μm, respectively, with no differences between the root-end filling materials (p > 0.05). However, more live bacteria were found in the MTA group in comparison to IRM and Biodentine groups (p < 0.05).

CONCLUSIONS

CLSM can be used to histologically demonstrate bacterial root-end colonization following root-end filling. This colonization at the filling-dentine interfaces and deeper into the dentinal tubules may be inhomogeneous, favoring the bucco-lingual aspects of the root.

CLINICAL RELEVANCE

Following root-end resection and filling bacterial colonization may lead to inflammatory reactions at the periapical tissues; the viability of the colonized bacteria may be affected by the type of root-end filling material.

Bacterial microleakage of temporary filling materials used for endodontic access cavity sealing

Background/purpose

Providing a tight coronal seal is key for the success of endodontic treatment, therefore the study aimed to assess bacterial microleakage of materials used for short- and long-term temporization.

Materials and methods

One hundred and twenty-eight human upper-third molars were divided into six experimental groups (n = 20) and two control groups: negative (n = 4) and positive (n = 4). The standardized access cavities were prepared and filled with: (1) Cavit; (2) Fuji II LC; (3) Fuji IX; (4) Voco Clip; (5) AdheSE and Tetric EvoCeram; (6) Excite and Tetric EvoCeram. The crown of each tooth was sectioned to obtain 5.5-mm-high disks, which were assembled in a standard setup for bacterial microleakage studies using Streptococcus mutans. The monitoring lasted 90 days. Kaplan-Meier survival analysis was performed.

Results

The lowest amount of leaking samples was found in AdheSE and Tetric EvoCeram (31.3%), Cavit (33.3%), and Excite and Tetric EvoCeram groups (35.3%), followed by Fuji II LC (66.7%), Voco Clip (83.3%). and Fuji IX (88.2%) groups. According to the day of microleakage, materials could be classified in three groups with statistically significant differences (P < 0.05). In the first group were Cavit (70 days), AdheSE and Tetric EvoCeram (68 days), and Excite and Tetric EvoCeram (65 days), in the second group were Voco Clip (44 days) and Fuji II LC (43 days), and in the third group was Fuji IX (21 days).

Conclusion

None of the tested materials were able to completely prevent bacterial microleakage. Adhesively bonded composites and Cavit offer better sealing compared with glass ionomer cements, resin modified glass ionomer cements, and composites without the use of an adhesive system.

Porosity and sealing ability of root fillings with gutta-percha and BioRoot RCS or AH Plus sealers. Evaluation by three ex vivo methods

AIM

To investigate the ability of BioRoot RCS, a tricalcium silicate-based root canal sealer and AH Plus to effectively fill the root canals of contralateral teeth using three evaluation methods, and to investigate also the correlation between the methods.

METHODOLOGY

The prepared root canals of ten pairs of contralateral mandibular premolar teeth were filled with gutta-percha and sealer using lateral compaction. The percentage of voids within the root canal was assessed by micro-computed tomography, whilst sealing ability was investigated by fluid transport and leakage of fluorescent microspheres. The interaction of sealer with dentine, and sealer penetration were assessed by confocal microscopy. The void volume, fluid flow, microsphere leakage and sealer interaction with dentine for both materials were compared. Nonparametric (Mann-Whitney) tests were used to compare the % void and fluid transport of the two sealers. Spearman correlation was used to assess the pairwise relationships between the techniques. The level of significance was set to 0.05.

RESULTS

BioRoot RCS exhibited significantly more percentage of voids than AH Plus. There was no difference in fluid flow and microsphere penetration. BioRoot RCS exhibited a different pattern of sealer penetration and interaction with the dentine walls compared to AH Plus. For both materials, the pairwise correlations between the three techniques were close to zero, indicating weak relationships.

CONCLUSIONS

MicroCT analysis revealed a higher void volume for BioRoot RCS. The other techniques did not show a difference between the sealing ability of the sealers. The correlation between the three ex vivo methods of assessment was weak demonstrating their complementarity rather than their concordance.

Integration of non-oral bacteria into in vitro oral biofilms

Biofilms are polymicrobial communities that grow on surfaces in nature. Oral bacteria can spontaneously form biofilms on the surface of teeth, which may compromise the health of the teeth, or their surrounding (periodontal) tissues. While the oral bacteria exhibit high tropism for their specialized ecological niche, it is not clear if bacteria that are not part of the normal oral microbiota can efficiently colonize and grow within oral biofilms. By using an in vitro "supragingival" biofilm model of 6 oral species, this study aimed to investigate if 3 individual bacterial species that are not part of the normal oral microbiota (Eschericia coli, Staphylococcus aureus, Enterococcus faecails) and one not previously tested oral species (Aggregatibacter actinomycetemcomitans) can be incorporated into this established supragingival biofilm model. Staphylococcus aureus and A. actinomycetemcomitans were able to grow efficiently in the biofilm, without disrupting the growth of the remaining species. They localized in sparse small aggregates within the biofilm mass. Enterococcus faecalis and E. coli were both able to populate the biofilm at high numbers, and suppressed the growth of A. oris and S. mutants. Enterococcus faecalis was arranged in a chain-like conformation, whereas E. coli was densely and evenly spread throughout the biofilm mass. In conclusion, it is possible for selected species that are not part of the normal oral microbiota to be introduced into an oral biofilm, under the given experimental micro-environmental conditions. Moreover, the equilibrated incorporation of A. actinomycetemcomitans and S. aureus in this oral biofilm model could be a useful tool in the study of aggressive periodontitis and peri-implantitis, in which these organisms are involved, respectively.

Coronal microleakage of endodontically treated teeth with intracanal post exposed to fresh human saliva

Objective

The aim of this study was to investigate the coronal microleakage of endodontically treated teeth prepared to receive an intracanal post and teeth with an intracanal post but without a prosthetic crown and exposed to contamination by fresh human saliva.

Material and Methods

A mechanical-chemical preparation following the step-back technique was carried out in 35 extracted single-rooted human teeth. The teeth were randomly divided into five groups: G1=root canals instrumented, obturated, and prepared to receive an intracanal post (N=10); G2=root canals with cemented posts but without coronal sealing (N=10); PC1=positive control root canals instrumented and open (N=5); PC2=positive control 2 root canals without instrumentation and open (N=5); and NC=negative control healthy teeth (N=5). The crowns were removed except for the control group of intact teeth. The root canals were obturated and sterilized with cobalt 60 gamma irradiation and were then adapted in an apparatus using a Brain Heart Infusion (BHI) medium and fresh human saliva for contamination. Microbial growth was indicated by the presence of turbidity in the BHI liquid medium.

Results

Data were submitted to the Kaplan-Meier Survival Analysis and the Holm-Sidak statistic method, which observed an index of 90% of microleakage in root canals after 24 hours for G1 and 70% of microleakage in samples at the end of 40 days for G2.

Conclusion

The results show that root canals with an intracanal post but without a prosthetic crown can be recontaminated when exposed to fresh human saliva in a short period.

Ability of new obturation materials to improve the seal of the root canal system: a review

New obturation biomaterials have been introduced over the past decade to improve the seal of the root canal system. However, it is not clear whether they have really produced a three-dimensional impervious seal that is important for reducing diseases associated with root canal treatment. A review of the literature was performed to identify models that have been employed for evaluating the seal of the root canal system. In vitro and in vivo models are not totally adept at quantifying the seal of root canals obturated with classic materials. Thus, one has to resort to clinical outcomes to examine whether there are real benefits associated with the use of recently introduced materials for obturating root canals. However, there is no simple answer because endodontic treatment outcomes are influenced by a host of other predictors that are more likely to take precedence over the influence of obturation materials. From the perspective of clinical performance, classic root filling materials have stood the test of time. Because many of the recently introduced materials are so new, there is not enough evidence yet to support their ability to improve clinical performance. This emphasizes the need to translate anecdotal information into clinically relevant research data on new biomaterials.

Laboratory validation of a new gas-enhanced dentine liquid permeation evaluation system

AIM

To validate a new automated dentine permeability testing platform based on pressure change measurements.

METHODOLOGY

A split chamber was designed allowing for concomitant measurement of fluid permeation and pressure difference. In a first test, system reliability was assessed by interposing a solid metal disk, embedded composite resin disks, or teeth by consecutively measuring eight times under standardized conditions. Secondly, the repeatability and applicability of the method was tested in a dentine wound model by using intact third molars: Class I (2 × 5 mm) and a full occlusal preparation as well a ceramic restoration were consecutively performed and repeatedly measured eight times each. In the last test, the system detection limit as well correlation between gas pressure difference and liquid permeation were evaluated: Again, third molars were used and occlusal preparations of increasing size (2 × 5, 3 × 5, 4 × 5, and 5 × 5 mm and full occlusal preparations, respectively) were made. Data was analyzed for the linearity of measurement, and R (2) values were calculated.

RESULTS

The embedding procedure allowed for perfect separation of the two chambers, and no significant variation in repeated measurements of evaluated samples for the respective treatments (p = 0.05) was found. The detection was 0.002 hPa/min for the pressure slope and 0.0225 μl/min for the fluid infiltration, respectively. The saline volume was highly correlating to the gas pressure changes (R (2) = 0.996, p < 0.0001).

CONCLUSIONS

The presented method is a reliable and exact tool to assess dentine permeability by nondestructive and repeatable measurements.

CLINICAL RELEVANCE

This method is suitable for measurements and comparison of the effectiveness of dentine wounds sealing materials.

The presence and distribution of bacteria in dentinal tubules of root filled teeth

AIM

To investigate the distribution of bacteria within the dentine tubular network in a two-chamber model in order to determine a possible route of penetration.

METHODOLOGY

Root canals of teeth in the experimental group (n = 16) were instrumented and root filled using AH26 and gutta-percha. Canals in the teeth serving as positive (n = 1) and negative (n = 1) controls were instrumented, but not root filled. A two-chamber model was fabricated for each root - upper chambers were inoculated weekly with Streptococcus gordonii in brain-heart infusion broth over 90 days. Turbidity of the lower chamber was checked daily. Samples that showed turbidity during the experimental period and samples that showed no signs of turbidity at 90 days were fractured and prepared for SEM examination. SEM examination for the presence of bacteria within the dentinal tubules was performed in the cervical, middle and apical root thirds. In each root third, the depth of bacterial penetration was recorded as inner, middle or outer dentine.

RESULTS

Bacteria were most commonly detected in the cervical third (14 of 30 areas). Irrespective of the root third examined, bacteria were most commonly detected in the inner dentine (i.e. adjacent to the root canal). Only two samples demonstrated bacterial penetration in the outer dentine.

CONCLUSION

The dentine tubular network provides a potential pathway for bacteria to penetrate tooth roots in a two-chamber model.