Ca2+Affects Physicochemical and Conformational Changes of Threadfin Bream Myosin and Actin in a Setting Model

Real-time spatial quantification of gastric acid diffusion in whey protein gels with different NaCl concentrations by wide-field fluorescence microscopy

Gastric acid diffusion and penetration constitute an essential process in the structural breakdown and enzymatic hydrolysis of solid food during digestion. This study aimed to quantify the real-time diffusion and spatial distribution of gastric acids in whey protein isolate (WPI) gels in the presence of 0-0.05 M NaCl during simulated digestion using a wide-field fluorescence microscope. For all the gels regardless of NaCl concentration, the outer surface rapidly developed a near-saturated layer, resulting in a higher normalized gastric acid concentration in the outer layer than in the inner layer. The pH decrease was more significant for the gels at a higher NaCl concentration (i.e., 0.05 M) due to the formation of a more discontinuous and looser network structure that would facilitate acid diffusion into the gel matrix and decrease the gel buffering capacity. Consistently, the effective diffusion coefficient (D_A) estimated via the Fick diffusion model was 6.19 × 10^-10 m²/s for 0.05 M WPI-RITC gels, significantly higher than 0.015 M (4.46 × 10^-10 m²/s) and 0 M (3.54 × 10^-10 m²/s) gels. The present study has provided a quantitative understanding of the diffusion process and spatial distribution of gastric acids within the WPI gel matrix in real-time during in vitro gastric digestion as influenced by NaCl concentration.

Insights into the trace Sr2+ impact on the gel properties and spatial structure of mutton myofibrillar proteins

Myofibrillar proteins (MPs) and the quality of meat strongly depend on the properties of MP gels, which in turn depend on several parameters that include the thermal history and the concentration of metal ions. Strontium element (Sr) widely exists in mineral water and is found as strontium ions (Sr²⁺), which is an essential trace element for humans. This study investigated the effects of trace Sr²⁺ on the structure-function relationship of mutton MPs, as well as their gels with water. Trace concentrations of Sr²⁺ were found to significantly alter the conformation of the MPs. An increase in Sr²⁺ concentration was associated with a reduction in the tightness and strength of the gel and a significant increase in its water-holding capacity As compared to the untreated control sample, the solubility, particle size, and the magnitude of the Zeta potential of the gels increased by 13.03 %, 12.62 %, and 19.73 %, respectively, whereas the water retention capacity and the gel strength increased by 23.13 % and 21.90 %, at a Sr²⁺ concentration of 5.0 mg/L. Molecular docking predicted an increase in ionic bonds and disulfide bonds because Sr²⁺ had a strong interaction with hydrophilic amino acids and acidic amino acids. The analysis of molecular forces further verified the significant facilitation of interactions between MP molecules with the induction of Sr²⁺. As compare to the untreated control group, the ionic and disulfide bonds increased by 141.17 % and 66.94 %, when treated with 5.0 mg/L Sr²⁺. These changes were likely due to the enhancement of protein-protein interactions caused by Sr²⁺, which could induce MP molecules to properly unfold and aggregate in gel formation. The results could provide a basis for improving the texture and the quality of meat and meat products.

The effect of heating method on the gel structures and properties of surimi prepared from Bombay duck (Harpadon nehereus)

This study investigates the effects of heating method, setting time, and setting temperature on the gel properties, water holding capacity (WHC), molecular forces, protein composition, protein conformation, and water transition of Bombay duck (BD) surimi gel. The obtained results demonstrate that the best gel properties are obtained by two-step heating at 30°C for 120 min while the hardness was 10.418 N and the breaking force was 4.52 N. Gel softening occurs at setting temperatures greater than 40°C due to the effect of endogenous enzymes in destroying the protein structure and increasing the hydrophobic and disulfide interactions. Low-field nuclear magnetic resonance spectra confirm that high two-step setting temperatures induce gel softening and the destruction of the surimi gel structure, as evidenced by the increased water migration at these temperatures. Of all protein conformations in the gel, the β-sheet structure, decreases from 38.40% at 30°C to 11.75% at 60°C when the setting time is 60 min, is the most susceptible to gel softening. Overall, the data reported herein provide a scientific basis for the development of new BD surimi products on an industrial level.

Gel performance of surimi induced by various thermal technologies: A review

Heating is a vital step in the gelation of surimi. Conventional water bath heating (WB) has the advantages of easy operation and low equipment requirements. However, the slow heat penetration during WB may lead to poor gel formation or gels prone to deterioration, especially with one-step heating. The two-step WB is time-consuming, and a large amount of water used tends to cause environmental problems. This review focuses on key factors affecting the quality of surimi gels in various heating technologies, such as surimi protein structure, chemical forces, or the activity of endogenous enzymes. In addition, the relationships between these factors and the gel performance of surimi under various heating modes are discussed by analyzing the heating temperature and heating rate. Compared with WB, the gel performance can be improved by controlling the heating conditions of microwave heating and ohmic heating, which are mainly achieved by changing the molecular structure of myofibrillar proteins or the activity of endogenous enzymes in surimi. Nevertheless, the novel thermal technologies still face several limitations and further research is needed to realize large-scale industrial production. This review provides ideas and directions for developing heat-induced surimi products with excellent gel properties.

Improvement of gelation properties of silver carp surimi through ultrasound-assisted water bath heating

The present work investigated the effects of water bath heating coupled with different ultrasound treatments on the gel properties, protein conformation, microstructures and chemical interactions of silver carp surimi at low/high salt levels. Results showed that the gel strength, hardness, springiness and water holding capacity (WHC) of surimi gels at low salt concentration were inferior to those at high salt content, regardless of the treatments. Compared with the traditional water bath heating, ultrasonic-assisted treatments significantly improved the gelation properties of surimi at the same salt level. In fact, ultrasound treatment also facilitated the unfolding of α-helix structure of the protein, with the resulting exposure of internal groups further enhancing hydrophobic interactions and hydrogen bonds between protein molecules, thereby leading to the formation of denser microstructures with smaller holes. Furthermore, the most noteworthy ultrasonic treatment group was ultrasound-assisted preheating (U + W) group, whose gelation performance under low salt condition, was comparable with that of the traditional two-stage heating (W + W) group with high salt content. Overall, ultrasound-assisted water bath preheating proved to be a feasible approach to improve the gel properties and microstructures of low-salt surimi gels.

Combination of Alcalase 2.4 L and CaCl2 for aqueous extraction of peanut oil

The combined application of CaCl₂ and Alcalase 2.4 L to the aqueous extraction process of peanuts was evaluated as a method to destabilize the oil body (OB) emulsion and improve the oil yield. After adding 5 mM CaCl₂ , the oil yield was reached to 92.0% which was similar with that obtained using Alcalase 2.4 L alone, and the required enzyme loading was decreased by approximately 60 times. In addition, the demulsification mechanism during aqueous extraction process was also investigated. Particle size and zeta-potential measurements indicated that the stability of the peanut OB emulsion dramatically decreased when CaCl₂ was added. Under these conditions, the demulsification of Alcalase 2.4 L performed was more efficiently. SDS-PAGE results showed that adding CaCl₂ changed the subunit structure of the peanut OB interface proteins and promoted the cross-linking among the arachin Ara h3 isoforms, resulting in unstable emulsions.

Identification by GeLC-MS/MS of trypsin inhibitor in sarcoplasmic proteins of three tropical fish and characterization of their inhibitory properties

Sarcoplasmic proteins from 3 fish species were fractionated by 50% to 70% ammonium sulfate precipitation. Lyophilized fractionated sarcoplasmic proteins of threadfin bream (TB-SP), bigeye snapper (BS-SP), and yellow croaker (YC-SP) showed 80% to 92% trypsin inhibitory activity. Trypsin inhibitory activity staining gel electrophoresis revealed bands at 32, 33, 37, 45, 48, and 50 kDa for the 3 species, and a band at 95 kDa was observed for TB-SP and YC-SP. Alpha-1-antitrypsin with molecular mass of 45 to 50 kDa was identified in YC-SP by gel-based liquid chromatography-tandem mass spectrometry (GeLC-MS/MS). Other major protein bands appeared on trypsin activity staining included phosphorylase, glyceraldehyde-3-phosphate dehydrogenase, and creatine kinase with molecular mass of 95 and 35 to 40 kDa, respectively. But, these 3 proteins did not show true trypsin inhibitory activity. Trypsin inhibitory activity of fractionated sarcoplasmic proteins showed good stability, with >80% activity retained at 60 °C and up to 0.6 M NaCl. TB-SP showed the highest inhibitory activity against autolysis of washed threadfin bream mince at 65 °C. Addition of 0.5% or 1% TB-SP improved textural properties of threadfin bream surimi gels preincubated at 37 or 65 °C followed by heating at 90 °C. Therefore, TB-SP could be a promising protein ingredient for enhancing surimi gel texture.

PRACTICAL APPLICATION

Threadfin bream, bigeye snapper, and yellow croaker are the main species used as raw material for tropical surimi production. Sarcoplasmic proteins from 3 species contain trypsin inhibitor(s) that can minimize proteolytic activity and improve gel texture of proteinase-laden fish muscle. Therefore, sarcoplasmic proteins that are byproducts from surimi processing of these species could be recovered, fractionated, and utilized as a functional protein ingredient.

Heat-induced denaturation and aggregation of actomyosin and myosin from yellowcheek carp during setting

Thermal inactivation kinetics of Ca²⁺-ATPase, changes in turbidity and rheological properties of actomyosin and myosin from yellowcheek carp during setting at different temperatures were investigated. Actomyosin and myosin setting at 40-45 °C exhibited greater extent and more rapid Ca²⁺-ATPase inactivation compared to at 25-30 °C. Formation of protein aggregates and three-dimensional network structures of actomyosin and myosin at 25-30 °C was far less than those at 40-45 °C. Thermal stability of actomyosin was higher than that of myosin as revealed by its higher activation energy for the inactivation of Ca²⁺-ATPase. Actomyosin and myosin also exhibited different dynamic rheological properties, especially when the setting temperatures were 40 and 45 °C.

Structural changes and dynamic rheological properties of sarcoplasmic proteins subjected to pH-shift method

Structural changes and dynamic rheological properties of sarcoplasmic proteins from striped catfish ( Pangasius hypophthalmus ) treated by various pH-shift processes were investigated. Isoelectric precipitation of acid-extracted sarcoplasmic proteins led to the lowest solubility in water. Sarcoplasmic proteins were unfolded after extremely acidic and alkaline extraction, exposing tryptophan and aliphatic residues. The alpha-helical structure was converted to beta-sheet following acidic extraction, whereas alkaline treatment did not disturb the alpha-helical structure of sarcoplasmic proteins. Disulfide formation, hydrogen bonding via tyrosine residues, and hydrophobic interactions occurred under extreme pH extraction. Acidic extraction induced denaturation and aggregation of sarcoplasmic proteins to a greater extent than did alkaline treatment. Hydrophobic interactions via aliphatic and aromatic residues were formed during isoelectric precipitation. Sarcoplasmic proteins were partially refolded after isoelectric precipitation followed by neutralization. Sarcoplasmic proteins prepared from an alkaline pH-shift process readily aggregated to form a gel at 45.10 degrees C, whereas higher thermal denaturation temperatures (>80 degrees C) and gel points ( approximately 78 degrees C) were observed in acid-treated sarcoplasmic proteins. The pH condition used for extraction, precipitation, and neutralization greatly affected structural changes of sarcoplasmic proteins, leading to different thermal and dynamic rheological properties.

Reactivity of fish and microbial transglutaminases on glutaminyl sites of peptides derived from threadfin bream myosin

Fish liver transglutaminase (FTG), a Ca(2+)-dependent enzyme, exhibits different characteristics from the Ca(2+)-independent microbial transglutaminase (MTG), leading to potential differences in their substrate specificity and reactivity. The ability of these enzymes to catalyze isopeptide bond formation by incorporating 5-(biotinamido)pentylamine (BPNH2) into peptides derived by tryptic digestion of threadfin bream (TB)-myosin was investigated to identify reaction sites and substrate specificity using a peptidomic strategy. BPNH2 was incorporated into TB-myosin peptides to a greater extent by MTG than FTG. Peptides derived from TB-myosin heavy chain (MHC) shared highest similarity to amberjack-MHC on the basis of a Mascot database search. Amino acid sequences and modification sites of BPNH2-tagged peptides were identified by tandem mass spectrometry based on the amberjack-MHC sequence. The BPNH2 modification sites catalyzed by both TGases were at the myosin rod. Most of the BPNH2 peptides contained charged amino acids (E, R, K) at the glutaminylamide site of reactive glutamine (Q*). The alpha-acrylamide site of Q* contained E, F, or L on peptides catalyzed by both enzymes, I, Q, or A on peptides catalyzed only by FTG, and V on a peptide catalyzed only by MTG. These results demonstrate the different structural requirements for glutaminyl substrates between these two enzymes.