Morphological and phenotypical characterization of Bacillus sporothermodurans

Incidence of Bacillus cereus, Bacillus sporothermodurans and Geobacillus stearothermophilus in ultra-high temperature milk and biofilm formation capacity of isolates

The presence of mesophilic and thermophilic spore-forming bacteria in UHT milk, as well as biofilm formation in dairy plants, are concerning. The current study explored the spore-forming bacilli diversity in 100 samples of UHT milk (skimmed and whole). Through this work, a total of 239 isolates from UHT milk samples were obtained. B. cereus s.s. was isolated from 7 samples, B. sporothermodurans from 19 and, G. stearothermophilus from 25 samples. Genes encoding hemolysin (HBL), and non-hemolytic (NHE) enterotoxins were detected in B. cereus s.s. isolates. All isolates of B. cereus s.s. (12) B. sporothermodurans (38), and G. stearothermophilus (47) were selected to verify the ability of biofilm formation in microtiter plates. The results showed all isolates could form biofilms. The OD₅₉₅ values of biofilm formation varied between 0.14 and 1.04 for B. cereus, 0.20 to 1.87 for B. sporothermodurans, and 0.49 to 2.77 for G. stearothermophilus. The data highlights that the dairy industry needs to reinforce control in the initial quality of the raw material and in CIP cleaning procedures; avoiding biofilm formation and consequently a persistent microbiota in processing plants, which can shelter pathogenic species such as B. cereus s.s.

Screening of Endophytic Antagonistic Bacterium from Phellodendron amurense and Their Biocontrol Effects against Canker Rot

Thirty-four strains of bacteria were isolated from Phellodendron amurense. Using Nectria haematococca as an indicator strain, the best strain, B18, was obtained by the growth rate method. The morphological, physiological and biochemical characteristics of strain B18 and its 16S DNA gene sequence were identified, and the biocontrol effect of strain B18 was assessed in pot and field tests, as well as in a field-control test. Drilling methods were used to determine the antibacterial activity of metabolites from strain B18 and their effects on the growth of pathogen mycelia and spores. The best bacteriostatic rate was 85.4%. B18 can hydrolyse starch and oxidize glucose but does not produce gas; a positive result was obtained in a gelatine liquefaction test. According to 16S DNA gene sequencing, strain B18 is Bacillus methylotrophicus (GenBank accession number: MG457759). The results of pot and field-control trials showed 98% disease control when inoculating 10⁸ cfu/ml of the strain. The disease control effect of the B18 culture liquid (concentrations of 10⁸, 2 × 10⁶, 10⁶, 5 × 10⁵ and 2.5 × 10⁵ cfu/ml) in the field-control test was higher than 80%, and the cure rate of the original delivery solution was 96%. Therefore, in the practical forestry production, a 2.5 × 10⁵ cfu/ml culture liquidshould be applied in advance to achieve good control effects.

ATP-Bioluminescence as a method to evaluated microbiological quality of UHT milk

New approaches are needed to quickly indicate possible contamination of UHT milk, among them the technique of ATP-Bioluminescence. Therefore, the aim of this study was to compare the results of culture methods with the results of ATP-Bioluminescence technique of 102 UHT whole milk samples incubated at 48, 72, and 168 hours. UHT milk samples were analyzed for the presence of mesophilic and psychrotrophic aerobic microorganisms using Plate Count Agar (PCA), Brain-Heart Infusion (BHI) media and PetrifilmTM Aerobic Count (AC) plates. The ATP-Bioluminescence technique was applied through the Microbial Luminescent Screening (MLS) system. Significant correlations were found between counts of aerobic mesophilic microorganisms on PCA, PetrifilmTM AC, BHI and results of ATP bioluminescence technique (P≤0.05). The ATP-Bioluminescence technique had higher correlation with counting method in PCA than BHI media. At lower pass/fail limits of Relative Light Units (60, 50, 45 and 40 RLU), the number of samples identified as positive increased and statistically agreed with aerobic mesophilic microorganism counts (P>0.05). For the dairy industry, the ATP-Bioluminescence technique may become an important tool that assists the official methods to quickly monitor the microbiological quality of UHT milk though this will likely require a threshold below 150 RLU.

Inhibitory effects of nisin and potassium sorbate alone or in combination on vegetative cells growth and spore germination of Bacillus sporothermodurans in milk

The inhibitory activities of nisin or/and potassium sorbate on spores and vegetative cells of Bacillus sporothermodurans LTIS27, which are known to be a contaminant of dairy products and to be extremely heat-resistant, were investigated. First, the tested concentrations of nisin or potassium sorbate inhibited vegetative cell growth; with the minimum inhibitory concentrations were 5 × 10(3) IU/ml and 2% (w/v), respectively. Then, the behaviour of vegetative cells and spores in presence of sub-lethal concentrations of nisin (50 UI/ml) or/and potassium sorbate (0.2%), in milk at 37 °C for 5 days, were evaluated. In the absence of inhibitors, strain grew and sporulated at the end of the exponential phase. Nisin (50 UI/ml) was able to inhibit spore outgrowth but didn't affect their germination. It induced an immediate and transitory reduction (1.6log(10) after 1 h and 2.8log(10) after 6 h of incubation) of vegetative cell growth which reappeared between 10 h and 24 h. Potassium sorbate (0.2%) had a durable bacteriostatic effect (1.1log(10) after 6 h), on vegetative cells, followed by a slower regrowth. It was able to inhibit both germination and outgrowth of spores. Association of nisin and potassium sorbate, at sub-lethal concentrations, showed a synergistic effect and resulted in a total inhibition of cells growth after 5 days. The results illustrate the efficacy of nisin and potassium sorbate in combination, and the commercial potential of applying such treatment to decontaminate any product that has a problem with persistence of bacterial spores.

Inactivation of Bacillus sporothermodurans spores by nisin and temperature studied by design of experiments in water and milk

Spores of Bacillus sporothermodurans are known to be a contaminant of dairy products and to be extremely heat-resistant. A central composite experimental design with three factors using response surface methodology was used to evaluate the effect of nisin (50-150 UI/mL), temperature (80-100 °C), and temperature-holding time (10-20 min) on the inactivation of B. sporothermodurans LTIS27 spores in distilled water, in skim milk and in chocolate milk. The experimental values were shown to be significantly in good agreement with the values predicted by the quadratic equation since the adjusted determination coefficients (Radj(2)) were around 0.97. By analyzing the response surfaces plots, the inactivation was shown to be higher in distilled water than in skim milk under all the conditions tested. Five-log cycle reductions of B. sporothermodurans spores were obtained after a treatment at 95 °C for 12 min in presence of 125 UI of nisin/mL in distilled water or at 100 °C for 13 min in presence of 134 UI of nisin/mL in skim milk or at 100 °C for 15 min in presence of 135 UI of nisin/mL in chocolate milk. This study showed the efficiency of nisin (15-184 UI/mL) in combination with temperature (73-106 °C) to inactivate spores of B. sporothermodurans in milk.

The combined effect of nisin, moderate heating and high hydrostatic pressure on the inactivation of Bacillus sporothermodurans spores

AIMS

To investigate the combined effect of hydrostatic pressure (HP), moderate temperature and nisin on the inactivation of Bacillus sporothermodurans spores which are known to be contaminant of dairy products and to be extremely heat-resistant.

METHODS AND RESULTS

A central composite experimental design with three factors, using response surface methodology, was used. By analysing the response surfaces and their corresponding contour plots, an interesting interaction with the three factors was observed. The inactivation observed was shown to be well fitted with values predicted by the quadratic equation, since the adjusted determination coefficient (R(adj)(2)) was 0·979. The optimum process parameters for a 5-log spores ml(-1) reduction of B. sporothermodurans spores were obtained, 472 MPa/53°C for 5 min in presence of 121 UI ml(-1) of nisin.

CONCLUSION

Nisin and temperature treatments improve the effectiveness of pressure in the inactivation of highly heat-resistant spores of B. sporothermodurans.

SIGNIFICANCE AND IMPACT OF THE STUDY

This study shows the potential of using high HP for a short time (5 min) in combination with moderate temperature and nisin to inactivate B. sporothermodurans spores in milk. Such treatments could be applied by the dairy industry to ensure the commercial sterility of UHT milk.

Bacillus sporothermodurans and other highly heat-resistant spore formers in milk

A recent example of a micro-organism causing undesired growth in consumer milk is Bacillus sporothermodurans producing highly heat-resistant spores (HRS) which may survive ultra-high temperature (UHT) treatment or industrial sterilization. Molecular typing showed a heterogeneous group of farm isolates (non-HRS strains), but a clonal group of UHT isolates from diverse European countries and other continents (HRS-clone) suggesting a common source. During a survey of Belgian dairy farms for the presence of potentially highly heat-resistant spore formers, high numbers of these spores were detected in filter cloth, green crop and fodder samples. The strain collection showed a high taxonomic diversity with 18 potentially new species and with Bacillus licheniformis and Geobacillus pallidus as predominating species overall. Seventeen B. sporothermodurans isolates were identified, mainly originating from feed concentrate. Heat resistance studies showed the UHT resistance of B. sporothermodurans spores present in industrially contaminated UHT milk, but a lower heat resistance of laboratory-grown strains (HRS and non-HRS). Hydrogen peroxide, used as sanitizer in the dairy industry, was found to induce higher heat resistance of laboratory-grown B. sporothermodurans strains to a certain level. This indicates that sublethal stress conditions may affect the heat resistance. By transmission electron microscopy, structural differences at the spore level were found between HRS and non-HRS strains. The data indicate that the attainment of extreme heat resistance is rather multifactorial.