Production and characterization of a new bioemulsifier from Pseudomonas putida ML2

Unveiling the potential of novel Metschnikowia yeast biosurfactants: triggering oxidative stress for promising antifungal and anticancer activity

BACKGROUND

Sophorolipids are glycolipid biosurfactants with potential antibacterial, antifungal, and anticancer applications, rendering them promising for research. Therefore, this study hypothesizes that sophorolipids may have a notable impact on disrupting membrane integrity and triggering the production of reactive oxygen species, ultimately resulting in the eradication of pathogenic microbes.

RESULTS

The current study resulted in the isolation of two Metschnikowia novel yeast strains. Sophorolipids production from these strains reached maximum yields of 23.24 g/l and 21.75 g/l, respectively, at the bioreactors level. Biosurfactants sophorolipids were characterized using FTIR and LC-MS techniques and found to be a mixture of acidic and lactonic forms with molecular weights of m/z 678 and 700. Our research elucidated sophorolipids' mechanism in disrupting bacterial and fungal membranes through ROS generation, confirmed by transmission electron microscopy and FACS analysis. The results showed that these compounds disrupted the membrane integrity and induced ROS production, leading to cell death in Klebsiella pneumoniae and Fusarium solani. In addition, the anticancer properties of sophorolipids were investigated on the A549 lung cancer cell line and found that sophorolipid-11D (SL-11D) and sophorolipid-11X (SL-11X) disrupted the actin cytoskeleton, as evidenced by immunofluorescence microscopy. The A549 cells were stained with Acridine orange/Ethidium bromide, which showed that they underwent necrosis. This was confirmed by flow cytometric analysis using Annexin/PI staining. The SL-11D and SL-11X molecules exhibited low levels of haemolytic activity and in-vitro cytotoxicity in HEK293, Caco-2, and L929 cell lines.

CONCLUSION

In this work, novel yeast species CIG-11DT and CIG-11XT, isolated from the bee's gut, produce significant yields of sophorolipids without needing secondary oil sources, indicating a more economical production method. Our research shows that sophorolipids disrupt bacterial and fungal membranes via ROS production. They suggest they may act as chemo-preventive agents by inducing apoptosis in lung cancer cells, offering the potential for enhancing anticancer therapies.

Biodegradation of organic compounds in the coal gangue by Bacillus sp. into humic acid

Coal gangue (CG), one of the world's largest industrial solid wastes produced during coal mining, is extremely difficult to be used owing to its combined contents of clay minerals and organic macromolecules. This study explored a novel process of degrading the harmful organic compounds in the CG into humic acid using a biological method characterized by scanning electron microscope-energy dispersive spectrometer, Fourier transform infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy (XPS), and elemental analyzer. The results reveal that adding selected Bacillus sp. to the CG for 40 days can increase the humic acid content by ~ 17 times, reaching 17338.17 mg/kg, which is also the best level for promoting plant growth. FTIR and XPS spectra show that the organic compounds in the CG transforms primarily from C=C to C=O, COOH, and O-H groups, indicating that the organic compounds are gradually oxidized and activated, improving the humic acid concentration of soil. In addition, Bacillus sp. decreases pH and benzo[a]pyrene contents, and increases the content of available nutrients. After microbial degradation, coal gangue can be turned into ecological restoration materials.

Production and characterization of bioemulsifier by Parapedobacter indicus

The current study evaluated Parapedobacter indicus MCC 2546 for its potential to produce a bioemulsifier (BE). Screening methods performed for BE production by P. indicus MCC 2546 showed good lipase activity, positive drop collapse test, and oil-spreading activity. Furthermore, it showed maximum emulsification activity (225 EU/ml) and emulsification index (E24 50%) at 37°C in Luria Bertani broth at 72 h with olive oil as a substrate. The optimal pH and NaCl concentration for maximum emulsification activity were 7 and 1%, respectively. P. indicus MCC 2546 lowered the surface tension of the culture medium from 59.65 to 50.42 ± 0.78 mN/m. BE produced was composed of 70% protein and 30% carbohydrate, which showed the protein-polysaccharide nature of the BE. Furthermore, Fourier transform infrared spectroscopy analysis confirmed the same. P. indicus MCC 2546 showed a catecholate type of siderophore production. This is the first report on BE and siderophore production by the genus Parapedobacter.

Production and Characterization of a Bioemulsifier Derived from Microorganisms with Potential Application in the Food Industry

There is a growing interest in the development and use of natural emulsifiers, which provide biodegradability as well as non-toxicity along with giving better performance compared to existing emulsifying agents used in the food industry. A large variety of sources of starting material, i.e., the microorganisms, are available to be used, hence giving a diverse range of applications. The focus of this review paper is on the production of bioemulsifiers, which are said to be "green surfactants", from fungi, bacteria and yeasts; furthermore, an overview pertaining to the knowledge gained over the years in terms of characterization techniques is reported. The methods used for the characterization and isolation such as TLC, GC-MS, HPLC, NMR have also been studied. The end-application products such as cookies, muffins, and doughs along with the methods used for the incorporation of bioemulsifiers, microorganisms from which they are derived, properties imparted to the product with the use of a particular bioemulsifier and comparison with the existing food grade emulsifiers has been discussed in detail. The future prospects indicate that newer bioemulsifiers with anti-microbial, anti-oxidant and stabilization properties will prove to have a larger impact, and emphasis will be on improving the performance at an economically viable methodology.

A comparative study on chemical characterization and properties of surface active compounds from Gram-positive Bacillus and Gram-negative Ochrobactrum strains utilizing pure hydrocarbons and waste mineral lubricating oils

Mineral lubricating oils are widely used in various industrial sectors for their applications in maintenance and functioning of machineries. However, indiscriminate dumping of these used oils have resulted in polluting the natural reservoirs which subsequently destroys ecological balance. Bacteria can emulsify or lower surface tension between phases of immiscible substrates and can acquire them as their carbon and energy sources. Such a phenomenon is mediated by production of extracellular polymers which can function as eminent surface active compounds based on their surfactant or emulsifying nature. The comparison between bacterial strains (Gram-positive Bacillus stratosphericus A15 and Gram-negative Ochrobactrum pseudintermedium C1) on utilization of pure straight chain hydrocarbons, waste mineral lubricating oils as sole carbon source and chemical characterization of the synthesized surface active compounds were studied. Characterization analysis by Ultraviolet Visible spectrophotometry, Fourier transform infrared spectroscopy, Nuclear Magnetic Resonance spectroscopy, Carbon-Hydrogen-Nitrogen analysis has given detailed structural elucidation of surface active compounds. The contrasting nature of bacterial strains in utilization of different hydrocarbons of waste mineral lubricating oils was observed in Gas Chromatography-Mass Spectroscopy analysis. The variation between both strains in utilization of hydrocarbons can be manifested in chemical structural differences and properties of the produced surface active compounds. Scanning Electron Microscopy has given detailed insight into the microstructural difference of the compounds. The utilization of lubricating oils can address waste disposal problem and offer an economical feasible approach for bacterial production of surface active compounds. Our results suggest that these surface active compounds can maneuver applications in environmental bioremediation and agriculture, pharmaceuticals and food as functional biomaterials.

Improving bioremediation process of petroleum wastewater using biosurfactants producing Stenotrophomonas sp. S1VKR-26 and assessment of phytotoxicity

Primarily, this study aims to evaluate the biosurfactant production capability of Stenotrophomonas sp. S1VKR-26, profiling of its bioremediation ability to remediate petroleum refinery wastewater in a lab-scale bioreactor and assessment of phytotoxicity of bioremediated petroleum wastewater. As a result, strain S1VKR-26 was found to produce 5.15 g L^-1 biosurfactant, CMC of 30 mg L^-1 and reduced the surface tension from 60.3 to 30.5 mN m^-1. Different PAHs like naphthalene (93%), phenanthrene (86%), fluoranthene (92%), and pyrene (98.3%), total petroleum hydrocarbons (72.33%) and phenolic compounds (93.06%) were significantly remediated from the wastewater after the treatment of strain S1VKR-26. Moreover, S1VKR-26 strain treated 1:1 diluted petroleum wastewater have higher germination (100%), vigor (486), and seedling (4.86 cm) compared to untreated wastewater. Therefore, the treatment of petroleum refinery wastewater with strain S1VKR-26 could be more effective in the sense of environmental safety and irrigation for crop production in agriculture.

Isolation of a novel thermophilic bacterium capable of producing high-yield bioemulsifier and its kinetic modelling aspects along with proposed metabolic pathway

Bioemulsifiers form stable emulsions and lower surface tension between two phases with potent anti-microbial activities. Some applications of bioemulsifier are performed at high temperatures and hence production of bioemulsifiers that are stable at high temperature is required. This study aimed at the production of bioemulsifier by an unexplored bacterial strain isolated from a local hot spring. The parameters tested for bioemulsifier production (emulsification ability, surface tension measurement and product formation) showed that 24 h is the optimal time for the production of bioemulsifier by strain S3 with yield of 1.4 g/l. The logistic growth curve of bacterial strain was analysed and kinetic constants for substrate utilisation and product formation were determined by Luedeking-Piret kinetic models. The bacterial strain S3 was Gram-positive and was classified as a strain of Brevibacillus borstelensis. The specific growth rate of the organism was 0.0096 h^-1 with the kinetic rate constants as 11.246 (γ) and 10.626 (δ) for Luedeking-Piret substrate and 3.8423 (α) and - 1.9075 (β) for Luedeking-Piret product. Knowledge of these values will help in estimating the substrate utilisation or bioemulsifier formed at any time point. These studies will also help in understanding internal metabolic fluxes hence rigorous analysis of metabolic pathway of bioemulsan is also performed in this study. Graphical abstract.

Physiological and Molecular Characterization of Biosurfactant Producing Endophytic Fungi Xylaria regalis from the Cones of Thuja plicata as a Potent Plant Growth Promoter with Its Potential Application

Currently, there is an absolute concern for all nations in agricultural productivity to meet growing demands of human population. In recent time, biosurfactants produced by diverse group of microorganisms are used to achieve such demands as it is known for its ecofriendly use in elimination of plant pathogens and for increasing the bioavailability of nutrients for plants. Endophytic fungi are the important source of secondary metabolites and novel bioactive compounds for different biological applications. In the present study, endophytic fungi Xylaria regalis (X. regalis) recovered from the cones of Thuja plicata was evaluated for its biosurfactant producing ability and plant growth-promoting abilities through various screening methods and also via its antagonistic activity against phytopathogens like Fusarium oxysporum and Aspergillus niger. In addition, X. regalis was also tested in vivo for a various range of growth parameters in chilli under greenhouse conditions. Significant increase in shoot and root length, dry matter production of shoot and root, chlorophyll, nitrogen, and phosphorus contents of chilli seedlings was found, which reveals its ability to improve the growth of crop plants. Hence, this study suggests the possibility of biosurfactant producing endophytic fungi X. regalis as a source of novel green biosurfactant for sustainable agriculture to achieve growing demands.

Enhanced biodegradation of mixed PAHs by mutated naphthalene 1,2-dioxygenase encoded by Pseudomonas putida strain KD6 isolated from petroleum refinery waste

Polycyclic aromatic hydrocarbons (PAHs) are a group of environmental pollutant that are given top priority to maintain water and soil quality to the most amenable standard. Biodegradation of PAHs by bacteria is the convenient option for decontamination on site or off site. The aim of the present study was to isolate and identify naturally occurring bacteria having mixed PAHs biodegradation ability. The newly isolated Pseudomonas putida strain KD6 was found to efficiently degrade 97.729% of 1500 mg L-1 mixed PAHs within 12 days in carbon-deficient minimal medium (CSM). The half-life (t1/2) and degradation rate constant (k) were estimated to be 3.2 and 0.2165 days, respectively. The first-order kinetic parameters in soil by strain KD6 had shown efficient biodegradation potency with the higher concentration of total PAHs (1500 mg kg-1 soil), t1/2 = 10.44 days-1. However, the biodegradation by un-inoculated control soil was found slower (t1/2 = 140 days-1) than the soil inoculated with P. putida strain KD6. The enzyme kinetic constants are also in agreement with chemical data obtained from the HPLC analysis. In addition, the sequence analysis and molecular docking studies showed that the strain KD6 encodes a mutant version of naphthalene 1,2-dioxygenase which have better Benzpyrene binding energy (-9.90 kcal mol-1) than wild type (-8.18 kcal mol-1) enzyme (chain A, 1NDO), respectively, with 0.00 and 0.08 RMSD values. The mutated naphthalene 1,2-dioxygenase nahAc has six altered amino acid residues near to the ligand binding site. The strain KD6 could be a good bioresource for in situ or ex situ biodegradation of polycyclic aromatic hydrocarbon.

Characterization of a novel bioemulsifier from Pseudomonas stutzeri

This study describes a novel and efficient alasan-like bioemulsifier produced by Pseudomonas stutzeri NJtech 11-1, which was isolated from the Shengli Oilfield. The strain was found to produce a new and interesting emulsion stabilizer. The crude bioemulsifier showed super stability with 50% salinity and broad pH 3-10. The emulsion index (EI₂₄) was increased to 100% after heating from 45 to 95 °C and the emulsion could be stable for at least 30 days. The yield of Ps-bioemulsifier (pure bioemulsifier) was 0.68 ± 0.05 mg mL^-1. The Ps-bioemulsifier was composed of carbohydrates (80 ± 2.6%) and proteins (9.5 ± 0.5%). A low concentration (0.2 mg mL^-1) of the Ps-bioemulsifier was obtained maximum emulsifying activity at pH 7.1 and its emulsifying activity strengthened by suitable salinity. Furthermore, Ps-bioemulsifier could also emulsify cyclohexane, hexadecane, kerosene, xylene hydrocarbons efficiently. Therefore, the Ps-bioemulsifier showed emulsifying characteristics which make it a good candidate for potential applications in bioremediation and microbial enhanced oil recovery.

Production, characterization, and antifungal activity of a biosurfactant produced by Rhodotorula babjevae YS3

Background

Sophorolipids are one of the most promising glycolipid biosurfactants and have been successfully employed in bioremediation and various other industrial sectors. They have also been described to exhibit antimicrobial activity against different bacterial species. Nevertheless, previous literature pertaining to the antifungal activity of sophorolipids are limited indicating the need for further research to explore novel strains with wide antimicrobial activity. A novel yeast strain, Rhodotorula babjevae YS3, was recently isolated from an agricultural field in Assam, Northeast India. This study was primarily emphasized at the characterization and subsequent evaluation of antifungal activity of the sophorolipid biosurfactant produced by R. babjevae YS3.

Results

The growth kinetics and biosurfactant production by R. babjevae YS3 was evaluated by cultivation in Bushnell-Haas medium containing glucose (10% w/v) as the sole carbon source. A reduction in the surface tension of the culture medium from 70 to 32.6 mN/m was observed after 24 h. The yield of crude biosurfactant was recorded to be 19.0 g/l which might further increase after optimization of the growth parameters. The biosurfactant was characterized to be a heterogeneous sophorolipid (SL) with both lactonic and acidic forms after TLC, FTIR and LC–MS analyses. The SL exhibited excellent oil spreading and emulsifying activity against crude oil at 38.46 mm² and 100% respectively. The CMC was observed to be 130 mg/l. The stability of the SL was evaluated over a wide range of pH (2–10), salinity (2–10% NaCl) and temperature (at 120 °C for time intervals of 30 up to 120 min). The SL was found to retain surface-active properties under the extreme conditions. Additionally, the SL exhibited promising antifungal activity against a considerably broad group of pathogenic fungi viz. Colletotrichum gloeosporioides, Fusarium verticilliodes, Fusarium oxysporum f. sp. pisi, Corynespora cassiicola, and Trichophyton rubrum.

Conclusions

The study reports, for the first time, the biosurfactant producing ability of R. babjevae, a relatively lesser studied yeast. The persistent surface active properties of the sophorolipid in extreme conditions advocates its applicability in diverse environmental and industrial sectors. Further, antifungal activities against plant and human pathogens opens up possibilities for development of efficient and eco-friendly antifungal agents with agricultural and biomedical applications.

Characterization of Biosurfactant Produced during Degradation of Hydrocarbons Using Crude Oil As Sole Source of Carbon

Production and spillage of petroleum hydrocarbons which is the most versatile energy resource causes disastrous environmental pollution. Elevated oil degrading performance from microorganisms is demanded for successful microbial remediation of those toxic pollutants. The employment of biosurfactant-producing and hydrocarbon-utilizing microbes enhances the effectiveness of bioremediation as biosurfactant plays a key role by making hydrocarbons bio-available for degradation. The present study aimed the isolation of a potent biosurfactant producing indigenous bacteria which can be employed for crude oil remediation, along with the characterization of the biosurfactant produced during crude oil biodegradation. A potent bacterial strain Pseudomonas aeruginosa PG1 (identified by 16s rDNA sequencing) was isolated from hydrocarbon contaminated soil that could efficiently produce biosurfactant by utilizing crude oil components as the carbon source, thereby leading to the enhanced degradation of the petroleum hydrocarbons. Strain PG1 could degrade 81.8% of total petroleum hydrocarbons (TPH) after 5 weeks of culture when grown in mineral salt media (MSM) supplemented with 2% (v/v) crude oil as the sole carbon source. GCMS analysis of the treated crude oil samples revealed that P. aeruginosa PG1 could potentially degrade various hydrocarbon contents including various PAHs present in the crude oil. Biosurfactant produced by strain PG1 in the course of crude oil degradation, promotes the reduction of surface tension (ST) of the culture medium from 51.8 to 29.6 mN m⁻¹, with the critical micelle concentration (CMC) of 56 mg L⁻¹. FTIR, LC-MS, and SEM-EDS studies revealed that the biosurfactant is a rhamnolipid comprising of both mono and di rhamnolipid congeners. The biosurfactant did not exhibit any cytotoxic effect to mouse L292 fibroblastic cell line, however, strong antibiotic activity against some pathogenic bacteria and fungus was observed.

Utilization of Paneer Whey Waste for Cost-Effective Production of Rhamnolipid Biosurfactant

The present study aimed at isolating rhamnolipid biosurfactant-producing bacteria that could utilize paneer whey, an abundant waste source as sole medium for the production purpose. Pseudomonas aeruginosa strain, SR17, was isolated from hydrocarbon-contaminated soil that could efficiently utilize paneer whey for rhamnolipid production and reduce surface tension of the medium from 52 to 26.5 mN/m. The yield of biosurfactant obtained was 2.7 g/l, upgraded to 4.8 g/l when supplemented with 2 % glucose and mineral salts. Biochemical, FTIR, and LC-MS analysis revealed that extracted biosurfactant is a combination of both mono and di-rhamnolipid congeners. The critical micelle concentration (CMC) was measured to be 110 mg/l. Emulsification activity of the biosurfactant against n-hexadecane, olive oil, kerosene, diesel oil, engine oil, and crude oil were found to be 83, 88, 81, 92, 86, and 100 %, respectively. The rhamnolipid was detected to be non-toxic against mouse fibroblastic cell line L292.

Biological surface-active compounds from marine bacteria

Surface-active compounds (SACs) are widely used in different industries as well as in many daily consumption products. However, with the increasing concern for their environmental acceptability, attention has turned towards biological SACs which are biodegradable, less toxic and more environmentally friendly. In this work, 176 marine hydrocarbon-degrading bacterial isolates from petroleum-contaminated sites along the Norwegian coastline were isolated and screened for their capacity to produce biological SACs. Among them, 18 isolates were capable of reducing the surface tension of the culture medium by at least 20 mN m(-1) and/or capable of maintaining more than 40% of the emulsion volume after 24 h when growing on glucose or kerosene as carbon and energy source. These isolates were members of the genera Pseudomonas, Pseudoalteromonas, Rhodococcus, Catenovulum, Cobetia, Glaciecola, Serratia, Marinomonas and Psychromonas. Two isolates, Rhodococcus sp. LF-13 and Rhodococcus sp. LF-22, reduced surface tension of culture medium by more than 40 mN m(-1) when growing on kerosene, n-hexadecane or rapeseed oil. The biosurfactants were produced by resting cells of the two Rhodococcus strains suggesting the biosynthesis of the biosurfactants was not necessarily associated with their growth on hydrocarbons.

Effects of cowpea (Vigna unguiculata) root mucilage on microbial community response and capacity for phenanthrene remediation

Biodegradation of polycyclic aromatic hydrocarbons (PAHs) is normally limited by their low solubility and poor bioavailability. Prior research suggests that biosurfactants are synthesized as intermediates during the production of mucilage at the root tip. To date the effects of mucilage on PAH degradation and microbial community response have not been directly examined. To address this question, our research compared 3 cowpea breeding lines (Vigna unguiculata) that differed in mucilage production for their effects on phenanthrene (PHE) degradation in soil. The High Performance Liquid Chromatography results indicated that the highest PHE degradation rate was achieved in soils planted with mucilage producing cowpea line C1, inoculated with Bradyrhizobium, leading to 91.6% PHE disappearance in 5 weeks. In root printing tests, strings treated with mucilage and bacteria produced larger clearing zones than those produced on mucilage treated strings with no bacteria or bacteria inoculated strings. Experiments with 14C-PHE and purified mucilage in soil slurry confirmed that the root mucilage significantly enhanced PHE mineralization (82.7%), which is 12% more than the control treatment without mucilage. The profiles of the PHE degraders generated by Denaturing gradient gel electrophoresis suggested that cowpea C1, producing a high amount of root mucilage, selectively enriched the PHE degrading bacteria population in rhizosphere. These findings indicate that root mucilage may play a significant role in enhancing PHE degradation and suggests that differences in mucilage production may be an important criterion for selection of the best plant species for use in phytoremediation of PAH contaminated soils.

High molecular weight bioemulsifiers, main properties and potential environmental and biomedical applications

High molecular weight bioemulsifiers are amphipathic polysaccharides, proteins, lipopolysaccharides, lipoproteins, or complex mixtures of these biopolymers, produced by a wide variety of microorganisms. They are characterized by highly structural diversity and have the ability to decrease the surface and interfacial tension at the surface and interface respectively and/or emulsify hydrophobic compounds. Emulsan, fatty acids, phospholipids, neutral lipids, exopolysaccharides, vesicles and fimbriae are among the most popular high molecular weight bioemulsifiers. They have great physic-chemical properties like tolerance to extreme conditions of pH, temperature and salinity, low toxicity and biodegradability. Owing their emulsion forming and breaking capacities, solubilization, mobilization and dispersion activities and their viscosity reduction activity; they possess great environmental application as enhancer of hydrocarbon biodegradation and for microbial enhanced oil recovery. Besides, they are applied in biomedical fields for their antimicrobial and anti-adhesive activities and involvement in immune responses.

Studies on molecular characterizations of the outer membrane proteins, lipids profile, and exopolysaccharides of antibiotic resistant strain Pseudomonas aeruginosa

Susceptibility of the tested Pseudomonas aeruginosa strain to two different antibiotics, tetracycline (TE) and ciprofloxacin (CIP), was carried out using liquid dilution method. Minimum inhibitory concentrations of TE and CIP were 9.0 and 6.0 mg/100 mL, respectively. Some metabolic changes due to both, the mode of action of TE and CIP on P. aeruginosa and its resistance to high concentrations of antibiotics (sub-MIC) were detected. The total cellular protein contents decreased after antibiotic treatment, while outer membrane protein (OMP) contents were approximately constant for both treated and untreated cells. Sodium dodecyl sulphate polyacrylamide gel electrophoresis (SDS-PAGE) analysis of the OMPs for untreated and TE and CIP treated cells indicated that the molecular changes were achieved as; lost in, induction and stability of some protein bands as a result of antibiotics treatment. Five bands (with mol. wt. 71.75, 54.8, 31.72, 28.63, and 20.33 KDa) were stable in both treated and untreated tested strains, while two bands (with mol. wt. 194.8 and 118.3 KDa) were induced and the lost of only one band (with mol. wt. 142.5 KDa) after antibiotics treatment. On the other hand, total lipids and phospholipids increased in antibiotic treated cells, while neutral lipids decreased. Also, there was observable stability in the number of fatty acids in untreated and treated cells (11 fatty acids). The unsaturation index was decreased to 56% and 17.6% in both TE and CIP treatments, respectively. The produced amount of EPSs in untreated cultures of P. aeruginosa was relatively higher than in treated cultures with sub-MICs of TE and CIP antibiotics. It was also observed that the amounts of exopolysaccharides (EPSs) increased by increasing the incubation period up to five days of incubation in case of untreated and antibiotic treated cultures.

Optimization, production and characterization of glycolipid biosurfactant from the marine actinobacterium, Streptomyces sp. MAB36

A potential glycolipid biosurfactant producer Streptomyces sp. MAB36 was isolated from marine sediment samples. Medium composition and culture conditions for the glycolipid biosurfactant production by Streptomyces sp. MAB36 were optimized, using two statistical methods: Plackett-Burman design was applied to find out the key ingredients and conditions for the best yield of glycolipid biosurfactant production and central composite design was used to optimize the concentration of the four significant variables, starch, casein, crude oil and incubation time. Fructose and yeast extract were the best carbon and nitrogen sources for the production of the glycolipid biosurfactant. Biochemical characterizations including FTIR and MS studies suggested the glycolipid nature of the biosurfactant. The isolated glycolipid biosurfactant reduced the surface tension of water from 73.2 to 32.4 mN/m. The purified glycolipid biosurfactant showed critical micelle concentrations of 36 mg/l. The glycolipid biosurfactant was effective at very low concentrations over a wide range of temperature, pH, and NaCl concentration. The purified glycolipid biosurfactant showed strong antimicrobial activity. Thus, the strain Streptomyces sp. MAB36 has proved to be a potential source of glycolipid biosurfactant that could be used for the bioremediation processes in the marine environment.

Production and characterization of biosurfactant produced by a novel Pseudomonas sp. 2B

Biosurfactant-producing bacteria were isolated from terrestrial samples collected in areas contaminated with petroleum compounds. Isolates were screened for biosurfactant production using Cetyl Tri Ammonium Bromide (CTAB)-Methylene blue agar selection medium and the qualitative drop-collapse test. An efficient bacterial strain was selected based on rapid drop collapse activity and highest biosurfactant production. The biochemical characteristics and partial sequenced 16S rRNA gene of isolate, 2B, identified the bacterium as Pseudomonas sp. Five different low cost carbon substrates were evaluated for their effect on biosurfactant production. The maximum biosurfactant synthesis (4.97 g/L) occurred at 96 h when the cells were grown on modified PPGAS medium containing 1% (v/v) molasses at 30 °C and 150 rpm. The cell free broth containing the biosurfactant could reduce the surface tension to 30.14 mN/m. The surface active compound showed emulsifying activity against a variety of hydrocarbons and achieved a maximum emulsion index of 84% for sunflower oil. Compositional analysis of the biosurfactant reveals that the extracted biosurfactant was a glycolipid type, which was composed of high percentages of lipid (∼65%, w/w) and carbohydrate (∼32%, w/w). Fourier transform infrared (FT-IR) spectrum of extracted biosurfactant indicates the presence of carboxyl, hydroxyl and methoxyl functional groups. The mass spectra (MS) shows that dirhamnolipid (l-rhamnopyranosyl-l-rhamnopyranosyl-3-hydroxydecanoyl-3-hydroxydecanoate, Rha-Rha-C(10)-C(10)) was detected in abundance with the predominant congener monorhamnolipid (l-rhamnopyranosyl-β-hydroxydecanoyl-β-hydroxydecanoate, Rha-C(10)-C(10)). The crude oil recovery studies using the biosurfactant produced by Pseudomonas sp. 2B suggested its potential application in microbial enhanced oil recovery and bioremediation.

Optimization of environmental factors for improved production of rhamnolipid biosurfactant by Pseudomonas aeruginosa RS29 on glycerol

A biosurfactant producing Pseudomonas aeruginosa RS29 (identified on the basis of 16S rDNA analysis) with good foaming and emulsification properties has been isolated from crude oil contaminated sites. Optimization of different environmental factors was carried out with an objective to achieve maximum production of biosurfactant. Production of biosurfactant was estimated in terms of surface tension reduction and emulsification (E24) index. It was recorded that the isolated strain produced highest biosurfactant after 48 h of incubation at 37.5 °C, with a pH range of 7-8 and at salinity <0.8% (w/v). Ammonium nitrate used in the experiment was the best nitrogen source for the growth of biomass of P. aeruginosa RS29. On the other hand sodium and potassium nitrate enhanced the production of biosurfactant (Surface tension, 26.3 and 26.4 mN/m and E24 index, 80 and 79% respectively). The CMC of the biosurfactant was 90 mg/l. Maximum biomass (6.30 g/l) and biosurfactant production (0.80 g/l) were recorded at an optimal C/N ratio of 12.5. Biochemical analysis and FTIR spectra confirmed that the biosurfactant was rhamnolipid in nature. GC-MS analysis revealed the presence of C(8) and C(10) fatty acid components in the purified biosurfactant.

Methods for investigating biosurfactants and bioemulsifiers: a review

Microorganisms produce biosurfactant (BS)/bioemulsifier (BE) with wide structural and functional diversity which consequently results in the adoption of different techniques to investigate these diverse amphiphilic molecules. This review aims to compile information on different microbial screening methods, surface active products extraction procedures, and analytical terminologies used in this field. Different methods for screening microbial culture broth or cell biomass for surface active compounds production are also presented and their possible advantages and disadvantages highlighted. In addition, the most common methods for purification, detection, and structure determination for a wide range of BS and BE are introduced. Simple techniques such as precipitation using acetone, ammonium sulphate, solvent extraction, ultrafiltration, ion exchange, dialysis, ultrafiltration, lyophilization, isoelectric focusing (IEF), and thin layer chromatography (TLC) are described. Other more elaborate techniques including high pressure liquid chromatography (HPLC), infra red (IR), gas chromatography-mass spectroscopy (GC-MS), nuclear magnetic resonance (NMR), and fast atom bombardment mass spectroscopy (FAB-MS), protein digestion and amino acid sequencing are also elucidated. Various experimental strategies including static light scattering and hydrodynamic characterization for micelles have been discussed. A combination of various analytical methods are often essential in this area of research and a numbers of trials and errors to isolate, purify and characterize various surface active agents are required. This review introduces the various methodologies that are indispensable for studying biosurfactants and bioemulsifiers.

Microbial surfactants of marine origin: potentials and prospects

Marine environment occupies the vast majority of the earth's surface and is a rich source of highly potent and active compounds. In recent years, microbial surfactants and emulsifiers have been reported from marine microflora. Surfactant and emulsifier molecules having diverse chemical nature such as exopolysaccharides, carbohydrate-lipid-protein complexes or glycolipopeptide, glycolipids, lipopeptides, phospholipids and ornithine lipids have been reported from various marine bacteria. These surface-active agents have been found to possess good emulsification and stabilization potentials for various lipophilic compounds such as aliphatic, aromatic and polyaromatic hydrocarbons and their uptake and degradation by the microorganisms. Few biosurfactant types such as glycolipids and lipopeptides have also been found to possess valuable biological activities. Surface-active agents from marine environments thus have tremendous potential to be used in industrial processes, for environmental remediation and as drugs.

Biosurfactant production by free and alginate entrapped cells of Pseudomonas fluorescens

Production of biosurfactant by free and alginate-entrapped cells of Pseudomonas fluorescens Migula 1895-DSMZ was investigated using olive oil as the sole carbon and energy source. Biosurfactant synthesis was followed by measuring surface tension and emulsifying index E24 over 5 days at ambient temperature and at neutral pH. Diffusional limitations in alginate beads affected the kinetics of biosurfactant production when compared to that obtained with free cells culture. Nevertheless, the emulsion stability was improved and fewer by-products interfered with the biosurfactant activity. A decrease in pH down to 5 in the case of immobilized cells was observed during the first 3 days, after which it returned to its initial value. The minimum values of surface tension were 30 and 35 dynes cm(-1) achieved after 40 and 72 h with free and immobilized cells, respectively, while the corresponding maximum E24 values were 67 and 62%, respectively. After separation by acetone precipitation, the biosurfactant showed a rhamnolipid-type in nature, and had a good foaming and emulsifying activities. The critical micellar concentration was found to be 290 mg l(-1). The biosurfactant also showed good stability during exposure to high temperatures (up to 120 degrees C for 15 min), to high salinity (10% NaCl) and to a wide range of pH (4-9).

Characterization of rhamnolipid produced by Pseudomonas aeruginosa isolate Bs20

Rhamnolipid produced by Pseudomonas aeruginosa isolate Bs20 is viscous sticky oily yellowish brown liquid with a fruity odor. It showed solubility at aqueous pH > 4 with optimum solubility at pH 7-7.5 and freely soluble in ethyl acetate. This biosurfactant has a very high surface activity as it could lower the surface tension of water to 30 mN/m at about 13.4 mg/L, and it exhibited excellent stabilities at high temperatures (heating at 100 degrees C for 1 h and autoclaving at 121 degrees C for 10 min), salinities (up to 6% NaCl), and pH values (up to pH 13). The produced biosurfactant can be used in the crude form either as cell-free or cell-containing culture broth of the grown bacteria, since both preparations showed high emulsification indices ranged between 59% and 66% against kerosene, diesel, and motor oil. These characters make the test rhamnolipid a potential candidate for use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. High-performance thin-layer chromatography densitometry revealed that the extracted rhamnolipid contained the two most active rhamnolipid homologues dirhamno dilipidic rhamnolipid and monorhamno dilipidic rhamnolipid at 44% and 56%, respectively, as compared to 51% and 29.5%, respectively, in a standard rhamnolipid preparation. The nature and ratio of these two rhamnolipid homologues showed to be strain dependent rather than medium-component dependent.

Characterization of surfactin produced by Bacillus subtilis isolate BS5

Physical and chromatographic characterization of the surfactin biosurfactant produced by Bacillus subtilis isolate BS5 has been conducted to study its potentiality for industrial application. The crude extract of test surfactin appeared as off-white to buff flake-like amorphous residue with bad odor similar to sour pomegranate. Test surfactin showed solubility in aqueous solution at pH>5 with optimum solubility at pH 8-8.5. It was also soluble in organic solvents like ethanol, acetone, methanol, butanol, chloroform, and dichloromethane. Surfactin crystals appeared rectangular with blunt corners and were arranged perpendicular to each other making a plus sign. Extracted surfactin showed high surface activity, as it could lower the surface tension of water from about 70 to 36 mN/m at approximately 15.6 mg/l. Moreover, test surfactin exhibited excellent stabilities at high temperatures (100 degrees C for up to 1 h at and autoclaving at 121 degrees C for 10 min), salinities (up to 6% NaCl), and over a wide range of pH (5-13). Test surfactin in the cell-free supernatant or crude culture broth forms showed high emulsification indices against kerosene (62.5% and 59%, respectively), diesel (62.5% and 66%, respectively), and motor oil (62% and 66%, respectively). These characters can effectively make test surfactin, in its crude forms, a potential candidate for the use in bioremediation of hydrocarbon-contaminated sites or in the petroleum industry. Chromatographic characterization of test surfactin, using high-performance liquid chromatography technique, revealed that the extracted surfactin contained numerous isoforms, of which six were found in the standard surfactin preparation (Fluka). Additional peaks appeared in the test surfactin and not in the standard one. These peaks may correspond to new surfactin isoforms that may be present in the test surfactin produced by B. subtilis isolate BS5.

A biosurfactant from Burkholderia cenocepacia BSP3 and its enhancement of pesticide solubilization

AIMS

To isolate a biosurfactant (BS)-producing bacterium, to characterize the BS properties and to evaluate its ability to enhance pesticide solubilization for further application in environmental remediation.

METHODS AND RESULTS

Five BS-producing bacteria were isolated from fuel oil-contaminated soil. Among them, Burkholderia cenocepacia BSP3 exhibited the highest emulsification index and was chosen for further study. Glucose-containing medium supplemented with nitrate or sunflower seed oil provided suitable conditions for growth and BS production. The BS was identified as a glucolipid, having a critical micelle concentration (CMC) of 316 mg l(-1). It could lower the surface tension of deionized water to 25 +/- 0.2 mN m(-1) and exhibited good emulsion stability. Finally, the application of the BS to facilitate pesticide solubilization demonstrated that this BS at the concentration below and above its CMC could enhance the apparent water solubility of three pesticides, i.e. methyl parathion, ethyl parathion and trifluralin.

CONCLUSIONS

Burkholderia cenocepacia BSP3 is a BS-producing bacterium isolated from oil-contaminated soil. The BS was identified as a glucolipid having a molecular mass of 550.4 g mol(-1). An apparent yield of the BS was 6.5 +/- 0.7 g l(-1). This glucolipid-type BS noticeably enhanced pesticide solubilization suggesting its role in environmental remediation.

SIGNIFICANCE AND IMPACT OF THE STUDY

A glucolipid type BS normally found in marine micro-organisms was isolated from a soil-bacterium. Due to its surface active properties and good performance in enhancement of pesticide solubilization, it could be used as a solubilizing agent for environmental remediation and synergistic treatment with bioremediation of pesticide-contaminated soil.

Selection and characterization of aerobic bacteria capable of degrading commercial mixtures of low-ethoxylated nonylphenols

AIMS

Isolation and characterization of new bacterial strains capable of degrading nonylphenol ethoxylates (NPnEO) with a low ethoxylation degree, which are particularly recalcitrant to biodegradation.

METHODS AND RESULTS

Seven aerobic bacterial strains were isolated from activated sludges derived from an Italian plant receiving NPnEO-contaminated wastewaters after enrichment with a low-ethoxylated NPnEO mixture. On the basis of 16S rDNA sequence, the strains were positioned into five genera: Ochrobactrum, Castellaniella, Variovorax, Pseudomonas and Psychrobacter. Their degradation capabilities have been evaluated on two commercial mixtures, i.e. Igepal CO-210 and Igepal CO-520, the former rich in low ethoxylated congeners and the latter containing a broader spectrum of NPnEO, and on 4-n-nonylphenol (NP). The strains degraded Igepal CO-210, Igepal CO-520 and 4-n-NP all applied at the initial concentration of 100 mg l(-1), by 35-75%, 35-90% and 15-25%, respectively, after 25 days of incubation.

CONCLUSIONS

Some of the isolated strains, in particular the Pseudomonas strains BCb12/1 and BCb12/3, showed interesting degradation capabilities towards low ethoxylated NPnEO congeners maintaining high cell vitality.

SIGNIFICANCE AND IMPACT OF THE STUDY

Increased knowledge of bacteria involved in NPnEO degradation and the possibility of using the isolated strains in tailored process for a tertiary biological treatment of effluents of wastewater treatment plants.

Polysaccharide differences between planktonic and biofilm-associated EPS from Pseudomonas fluorescens B52

The polysaccharides associated with free (planktonic) and surface-attached (biofilm) cells from cultures of Pseudomonas fluorescens strain B52 were compared. Variations in the attached matrix due to surface material (glass or stainless steel) were also analyzed. Two digestion methods were used to optimize the recoveries of sugars, uronic acids and acidic substituents. The yield of analyzable material after digestion reached 90% for the material associated to the biofilms, though only 20-30% for that bound to planktonic cells. The polysaccharide(s) in the biofilm had glucuronic and guluronic acids as main components, besides rhamnose, glucose and glucosamine. The proportion of glucuronic to guluronic acid was higher in the polysaccharide(s) found in biofilms formed on stainless steel than in those on glass.

Physiological aspects. Part 1 in a series of papers devoted to surfactants in microbiology and biotechnology

Surfactants, both chemical and biological, are amphiphilic compounds which can reduce surface and interfacial tensions by accumulating at the interface of immiscible fluids and increase the solubility, mobility, bioavailability and subsequent biodegradation of hydrophobic or insoluble organic compounds. Investigations on their impacts on microbial activity have generally been limited in scope to the most common and best characterized surfactants. Recently a number of new biosurfactants have been described and accelerated advances in molecular and cellular biology are expected to expand our insights into the diversity of structures and applications of biosurfactants. Biosurfactants play an essential natural role in the swarming motility of microorganisms and participate in cellular physiological processes of signaling and differentiation as well as in biofilm formation. Biosurfactants also exhibit natural physiological roles in increasing bioavailability of hydrophobic molecules and can complex with heavy metals, and some also possess antimicrobial activity. Chemical- and indeed bio-surfactants may also be added exogenously to microbial systems to influence behaviour and/or activity, mimicking the latter effects of biosurfactants. They have been exploited in this way, for example as antimicrobial agents in disease control and to improve degradation of chemical contaminants. Chemical surfactants can interact with microbial proteins and can be manipulated to modify enzyme conformation in a manner that alters enzyme activity, stability and/or specificity. Both chemical- and bio-surfactants are potentially toxic to specific microbes and may be exploited as antimicrobial agents against plant, animal and human microbial pathogens. Because of the widespread use of chemical surfactants, their potential impacts on microbial communities in the environment are receiving considerable attention.

Differential responses of a mine tailings Pseudomonas isolate to cadmium and lead exposures

We examined cadmium and lead resistance in Pseudomonas sp. S8A, an isolate obtained from mine tailings-contaminated soil. Resistant to soluble metal concentrations up to 200 mg l(-1) cadmium and 300 mg l(-1) lead, S8A produced both exopolymer and biosurfactant. Upon growth, this pseudomonad diverged into two morphologically distinct colony subtypes; small and round or large and flat. In the presence of lead and in the no metal control the large morphotype appeared only in late stationary phase. With cadmium the large morphotype appeared immediately following exposure. Results show that the large morphotype produced greater amounts of surfactant than the small morphotype, suggesting a unique subpopulation response to cadmium toxicity. Results also indicate that an unidentified 28 kDa protein was expressed following exposure to >10 mg l(-1) cadmium. This study demonstrates new links between surfactant production, differential subpopulation response and metal exposure.