The prevalence of tooth discolouration and the self-satisfaction with tooth colour in a Chinese urban population

Precision layering techniques: Integrating digital tools for accurate color matching and realistic try-ins in anterior composite restorations

OBJECTIVE

This article aims to demonstrate the clinical application of a comprehensive workflow that integrates digital tools for accurate color matching, and its immediate implementation in the restoration of anterior teeth.

CLINICAL CONSIDERATIONS

Two patients demonstrating dissatisfaction regarding a maxillary central incisor had an old restoration replaced resorting to a digital workflow to enhance the predictability of the new direct restoration. OptiShade allowed the precise assessment of tooth color and the CompoShade application provided precise color and material selection, as well as the determination of a layering strategy. Precision and accuracy of the colorimeter and the composite layering application were demonstrated clinically in vivo.

CONCLUSIONS

Implementing a digital workflow with the integration of OptiShade measurements and the CompoShade layering recipe calculation, as well as the respective realistic try-in, enables the achievement of precise color matching for anterior composite restorations.

CLINICAL SIGNIFICANCE

The employment of a digital colorimeter and layering recipes simplify shade matching, and optimizes composite resin clinical use and success. The implementation of a realistic try-in, previous to the definitive restoration, allows the clinician to perform any adjustments if needed.

Effect of conventional cigarette smoking and recent heated tobacco products on CAD/CAM restorative materials

OBJECTIVE

To determine the effects of conventional cigarette smoking (CS) and recent heated tobacco products (HTPs) on the surface roughness and color stability of different indirect restorative materials.

MATERIALS AND METHODS

One hundred disc-shaped samples were constructed of three different restorative CAD/CAM materials: lithium disilicate glass-ceramic (IPS e.max CAD; Ivoclar Vivadent, Liechtenstein), zirconia (BruxZir® Zirconia, Glidewell, USA) and polyetheretherketone (BioHPP® bredent GmbH, Germany). Of the IPS e.max CAD and the Bruxzir samples, 20 samples were glazed, and 20 samples were polished, while the BioHPP samples were all polished according to the manufacturer's instructions. Fifty samples were subjected to conventional cigarette smoking (LM, Philip Morris International Inc., Egypt) (Groups: IPS e.max CAD_Glazed exposed to CS (LD_G_Cig), IPS e.max CAD_Polished exposed to CS (LD_P_Cig), Bruxzir_Glazed exposed to CS (Zr_G_Cig), Bruxzir _Polished exposed to CS (Zr_P_Cig) and BioHPP exposed to CS (PEEK_Cig) and fifty samples were exposed to heated tobacco product smoking (Heets, Russet selection, Philip Morris International Inc., Italy) (Groups: IPS e.max CAD_Glazed exposed to HTP (LD_G_HTP), IPS e.max CAD_Polished exposed to HTP (LD_P_HTP), Bruxzir_Glazed exposed to HTP (Zr_G_HTP), Bruxzir CAD_Polished exposed to HTP (Zr_P_HTP) and BioHPP exposed to HTP (PEEK_HTP).. Six hundred cigarettes/heets representing 30 days of medium smoking behavior (20 cigarettes/day) were used. Before and after exposure to smoke, the surface roughness of all the samples was measured using JITAI8101 surface roughness tester (Beijing Jitai Tech Detection Device Co., Ltd, China, and the color parameters were assessed using VITA Easyshade Advance 4.01 (VITA shade, VITA made, VITA). The data were analyzed using One-way ANOVA, paired sample t-test and independent sample t-test. The significance level was set at α < 0.05. The surface topography was evaluated by scanning electron microscopy (SEM) and analyzed using energy-dispersive X-ray (EDX) spectroscopy to determine changes in the surface chemical composition.

RESULTS

Both types of smoking caused significant increases in the surface roughness of all the samples. There was a significant difference in color change between CS and HTP for all materials with different surface finish (P < 0.01) and zirconia had the greatest effect on color change (P < 0.001). In contrast, polyetheretherketone (PEEK) "BioHPP" had the least effect (P < 0.001).

CONCLUSION

Exposure to different types of smoking induce changes in the surface topography and color of different esthetic restorative materials. Compared with HTP, conventional cigarette smoke has a greater effect on the surface roughness and color stability of esthetic restorative materials. The glazed surfaces showed less change in surface topography than did the polished surfaces. Zirconia showed better color stability when compared to polyetheretherketone (PEEK).

Nanotechnology in toothpaste: Fundamentals, trends, and safety

Several studies have revealed that healthcare nanomaterials are widely used in numerous areas of dentistry, including prevention, diagnosis, treatment, and repair. Nanomaterials in dental cosmetics are utilized to enhance the efficacy of toothpaste and other mouthwashes. Nanoparticles are added to toothpastes for a variety of reasons, including dental decay prevention, remineralization, hypersensitivity reduction, brightening, and antibacterial qualities. In this review, the benefits and uses of many common nanomaterials found in toothpaste are outlined. Additionally, the capacity and clinical applications of nanoparticles as anti-bacterial, whitening, hypersensitivity, and remineralizing agents in the treatment of dental problems and periodontitis are discussed.

Effect of whitening toothpastes on the surface roughness and microhardness of human teeth-an in vitro study

OBJECTIVE

To determine the effect of whitening toothpastes on the surface roughness and microhardness of human teeth.

METHODOLOGY

Surface roughness was estimated using the Talysurf instrument, and microhardness was estimated using the Vickers hardness tester before and after the application of whitening toothpastes on mounted extracted human teeth.

RESULTS

In the activated charcoal group, there was a reduction in the surface roughness from 1.21 at baseline to 1.09 at 1 month and a further reduction to 1.02 at 3 months, which was found to be statistically significant. However, no statistically significant difference in surface roughness was found in the other toothpaste groups. With respect to microhardness, all 4 whitening toothpastes showed a statistically significant reduction in microhardness after 3 months of brushing. However, the reduction was significantly higher in group 2 and in group 4 compared to the others.

CONCLUSION

This study showed that whitening toothpaste containing activated charcoal significantly reduced the surface roughness, whereas toothpastes with blue covarine and toothpastes containing activated charcoal significantly reduced the microhardness of the tooth.

CLINICAL RELEVANCE

This study emphasizes the need for healthcare professionals to be aware of the potential disadvantages of whitening toothpastes and make evidence-based decisions when recommending the product to patients.

Whitening Optical Effect of New Chewing Gums

Background:

Today, many treatments are available to enhance the color of teeth, but they require a few days to weeks to deliver this effect.

Objective:

To evaluate the instantaneous optical whitening effect of two new sugar-free chewing gums and one dentifrice of proven efficacy versus one placebo chewing gum.

Methods:

This was a single-blind, parallel trial. 424 participants entered the study and were randomly allocated to four groups. They received a personal silicone mask with a calibrated hole at one upper incisor to apply a dental colorimeter. The tools tested were chewing-gum containing indigotine (E132-FD&C Blue 2) and spirulina, chewing-gum containing only spirulina, chewing-gum placebo, and dentifrice containing Blue Covarine. Vita® Easyshade scored the tooth color, and the WIO and WID whiteness indexes were calculated. For chewing gums, the color of the teeth was scored before the assumption and after 2’30” of mastication. For dentifrice, participants brushed for 1’30”, then rinsed, and the color was scored before brushing and after 2’30”. Statistical analysis was performed by ANOVA and Tukey post-hoc.

Results:

The two experimental whitening chewing gums and the dentifrice significantly increased the WIO and the WID indexes from the baselines (p<0.001). Moreover, their effects were statistically greater than those reported for the placebo chewing gum (p<0.05) but not significatively different among them (p=NS).

Conclusion:

All the tested whitening tools showed an instant optical whitening perception. Further studies are required to assess the intensity of the effect over a prolonged time to meet the people's request for fast whitening tools.

The clinical trial registration no. is PVM-2020-01.

In vitro procedures for color stability evaluation of dental resin-based composites exposed to smoke: A scoping review

The objective of this study was to review the experimental in vitro procedures employed to assess the color stability of resin-based composites exposed to smoke. A literature search was performed on four databases (Pubmed, Scopus, Embase, and Web of Science). The quality of the included papers was assessed with the Cochrane risk-of-bias tool (RoB 2). In total, 25 studies were selected for full-text reading, from which 12 were included in the review. The assessed variables were: dimensions, shape, time before exposure, finishing, smoke-type, exposure time, brushing simulation, color, measuring system, repolishing. A disk-shaped specimen was used in most studies (n=10) with a 2 mm thickness (n=7) in custom made devices equipped with vacuum pumps or in Vitrocell systems. Spectrophotometers were the most used devices (n=11). Color differences were quantified with ΔE (n=12), ΔE00 (n=1). The large variety of staining procedures suggests the need for standardization.

Tooth whitening with an experimental toothpaste containing hydroxyapatite nanoparticles

Background

The aim of this study was to evaluate the postbrushing tooth-whitening effect of toothpaste containing hydroxyapatite nanoparticles (nano-HAPs). The impact of the concentration on the whitening performance of nano-HAP toothpaste was also investigated.

Methods

Two concentrations of nano-HAP (10 wt% and 1 wt%) were incorporated in nonabrasive toothpastes. Forty bovine incisors were randomly assigned into four groups: 10 wt% nano-HAP, 1 wt% nano-HAP, toothpaste without nano-HAP as a negative control and water as a blank control. Each tooth was treated with the toothpaste three times and hydrodynamic shear force (HSF) once. The teeth surfaces were observed by SEM after each application. Tooth color (L*, a* and b* values) was measured by a spectrophotometer, and color changes (△E, △L, △a and △b values) were calculated. Two-way mixed ANOVA was performed to evaluate the influence of the concentration and repeated application on the tooth-whitening effect of nano-HAP.

Results

We found that nano-HAP-treated enamel exhibited higher L* values and lower a* and b* values than the control groups (P < 0.05). The 10 wt% nano-HAP group showed significantly higher △E values than the 1 wt% nano-HAP group (P < 0.05). After three applications, the △E mean value of the 10 wt% nano-HAP group was 4.47. The △E and △L values were slightly reduced after HSF (P < 0.05). For both nano-HAP groups, HAP single crystallites and agglomerates were identified, and their sizes grew with nano-HAP reapplication.

Conclusions

In conclusion, nano-HAP toothpaste has a satisfying postbrushing whitening effect and good resistance to mechanical forces. The whitening effect seemed to be concentration-dependent.

Effects of conventional and heated tobacco product smoking on discoloration of artificial denture teeth

STATEMENT OF PROBLEM

Cigarette smoke can cause discoloration of artificial denture teeth. However, studies on the effects of heated tobacco product smoke on artificial denture teeth are lacking.

PURPOSE

The purpose of this in vitro study was to evaluate the effects of conventional cigarette and heated tobacco product smoke on the color stability of artificial denture teeth.

MATERIAL AND METHODS

Ninety maxillary central incisor denture teeth (Endura Anterior HC5 A3; Shofu) were randomly divided into 3 groups (n=30). Teeth in the control group were exposed to air; those in group CC were exposed to conventional cigarette (Marlboro Medium; Philip Morris) smoke, and those in group HT were exposed to heated tobacco product (IQOS 2.4 plus holder, Marlboro Heets Silver; Philip Morris) smoke. Before the experiment, the shade of the artificial denture teeth was evaluated in accordance with the Commission International de I'Eclairage (CIELab) color system by using a spectrophotometer (Shadepilot; DeguDent GmbH). The average CIELab value was estimated by scanning the entire labial surface of each specimen. To simulate smoking, standard conditions described by the Coresta Recommended Method N°22 were used-the puff duration was 2 seconds, with a 60-second interval between puffs. For each cigarette, 6 puffs and 6 intervals were simulated across 372 seconds. A total of 105 cigarettes were used based on a smoking simulation of 15 cigarettes each day for 7 days. The teeth in the control group were stored in fresh air in the smoke chamber for the same period as those in the experimental groups. After the experiment, L∗, a∗, and b∗ values were measured, and ΔE was calculated to evaluate the color change. All statistical analyses were performed with a statistical software program using a paired t test to determine discoloration after exposure to cigarette smoke. One-way ANOVA and the Tukey test were used to evaluate the significant differences between groups (α=.05).

RESULTS

Lightness was significantly lower in the CC and HT groups (P<.001). All CIELab values showed statistically significant differences in the CC group. The greatest color change was observed in the CC group (ΔE=6.93 ±0.59), whereas the HT group showed a clinically imperceptible color change (ΔE=0.79 ±0.21). Discoloration was minimal in the CC group (ΔE=0.34 ±0.13).

CONCLUSIONS

Conventional cigarette and heated tobacco product smoke can change the color of denture teeth. Heated tobacco product smoke causes less discoloration of denture teeth.

Effect of Over-The-Counter Tooth-Whitening Products on Enamel Surface Roughness and Microhardness

Background: To evaluate the efficacy of new over-the-counter tooth-whitening products on enamel surface roughness and microhardness. Methods: A total of 120 enamel specimens were prepared and randomly allocated into six groups. Group A was treated with 10% carbamide peroxide; Group B was immersed in distilled water; Group C was treated with hydrated silica, sodium hexametaphosphate toothpaste; Group D was treated with sodium bicarbonate; Group E was treated with 0.25% citric acid; and Group F was treated with hydrated silica, charcoal powder. Results: A, B, and D demonstrated decreased Ra, whereas Groups C, E, and F showed an increased Ra after whitening. The changes in Ra from T0 to T1 in each group was statistically significant (p < 0.001) except for Group B (p = 0.85). The groups showed decreased KHN after whitening, except for specimens in Group B (distilled water). The KHN from T0 to T1 decreased significantly for groups A, C, E, and F (p = 0.001). Significant difference was observed at T1 (p < 0.0001). Conclusion: Within the limitations of this study, it could be demonstrated that surface roughness and enamel microhardness changes were influenced by the type, composition, and exposure time of the whitening product.

Effectiveness and color stability of bleaching techniques on blood-stained teeth: An in vitro study

OBJECTIVE

Evaluate the effectiveness and color stability of bleaching techniques on blood-stained teeth.

MATERIAL AND METHODS

The teeth were stained by blood and allocated to groups: walking bleach, inside/outside, and in-office bleaching. L*, a*, b*, C*, h° color coordinates were measured using a clinical spectrophotometer at baseline, weekly (T1-T2-T3), and at 1-week (T4), 6-months (T5), and 1-year (T6) follow-up evaluations. ΔE ab * , ΔE 00 , and ΔWI D were calculated between sequential evaluation timepoints and between baseline and each evaluation timepoint. Color coordinates and WI_D differences in each timepoint and technique were analyzed by Wilcoxon Signed Rank, Kruskal-Wallis and Mann-Whitney U test, respectively. ΔE ab * , ΔE 00 , and ΔWI D were interpreted by color visual thresholds.

RESULTS

The techniques presented a significant increase in L* and WI_D and, a significant decrease in a* and b* until the completion of treatments. Statistical differences between the techniques for a*, b* and WI_D were observed from T1 until T3. All techniques demonstrated excellent effectiveness for ΔE ab * , ΔE 00 , and ΔWI D between baseline and each evaluation and follow-up timepoints. However, at T6, it was possible to identify a rebound effect for all techniques.

CONCLUSIONS

All bleaching techniques presented excellent effectiveness. The stability of the whitening produced was maintained for 6 months.

CLINICAL SIGNIFICANCE

Effective whitening of blood-stained teeth was achieved using walking bleach (sodium perborate), inside/outside (hydrogen peroxide - 7.5%) and in-office techniques (hydrogen peroxide - 35%). The bleaching techniques were effective after the completion of the treatments. A slight rebound was observed at 1 year follow-up.

Effects of charcoal-based whitening toothpastes on human enamel in terms of color, surface roughness, and microhardness: an in vitro study

OBJECTIVE

Charcoal based oral care products have gained popularity in the last few years. The aim of this in vitro study was to compare the effects of different charcoal based whitening toothpastes on color, surface roughness and microhardness of human enamel.

MATERIALS AND METHODS

Forty-eight specimens obtained from human permanent upper incisor teeth were randomly divided into 4 groups(n=12):Group-1:Colgate Total 12(CT); Group-2:Body Kingdom(BK); Group-3:Black is White(BW), Group-4:Colgate optic white(COW). Following 4 days cycle of darkening(2-min chlorhexidine and 60-min black tea per day), a 12- week brushing(twice daily for 1 min)was performed. Color of specimens was measured using a spectrophotometer. A contact type profilometer was used to measure surface roughness (Ra) and Vicker's hardness tester was used for the changes in microhardness(VHN). A representative sample from each group was visualized by SEM. Data were analyzed by One-way ANOVA, Welch, Fisher's, Kruskall-Wallis, Wilcoxon Sign Rank and Paired t-tests(p<0.05).

RESULTS

After 12- week brushing, no differences were found among the groups in terms of color change(p=0.989). All toothpastes tested showed no clinically acceptable whitening performances. A substantial increase in surface roughness was found in all groups, except BW(p<0.05). An increase was found in microhardness with CT(p=0.013), while no changes were found with BK, BW and COW(p>0.05).Only few scratches were observed on the enamel surfaces by SEM evaluations.

CONCLUSION

Twelve week brushing with charcoal based whitening toothpastes and a regular fluoridated toothpaste presented similar effects in color of enamel. Surface roughness was increased(except BW) while microhardness was not affected(except CT) with charcoal based whitening toothpastes.

CLINICAL RELEVANCE

Charcoal based whitening toothpastes do not promise to whiten the human permanent teeth and their effects on enamel abrasion should not be disregarded.

Investigation of surface roughness values of various restorative materials after brushing with blue covarine containing whitening toothpaste by two different methods: AFM and profilometer

The aim of this study is to evaluate the effect of whitening toothpaste on the surface roughness of resin-based restorative materials by different measurement methods. Twenty four specimens from each of human enamel, a microhybrid composite and two nanohybrid composites discs (8.0 diameter × 4.0 mm thick) were divided into two groups (n = 12) according to toothbrushing solutıon and subjected to simulation toothbrushing (30,000 cycles) with both distilled water and whitening toothpaste containing blue covarine. Surface roughness was examined using atomic force microscopy (AFM), profilometer, and scanning electron microscopy (SEM), and the data obtained were subjected to analysis. Ra values of Tescera (TES) were significantly higher than Sonicfill 2 (SF2) when brushing both toothbrushing solutions for initial or 30,000 cycles. Roughness increased for SF2 and TES when brushed for 30,000 cycles and was higher than enamel and Herculite XRV Ultra (HXU). Human enamel was obtained lower surface roughness values brushed with toothpaste compared with distilled water. Evaluation of the surface roughness of control groups using the AFM revealed no statistically significant difference between the groups, but significant differences were found using a profilometer. The use of abrasive whitening toothpaste containing blue covarine and the number of brushing cycles affect the surface properties of human enamel and the restorative material, and also, the clinical success of the restoration. Toothbrushing for 30,000 cycles increased the surface roughness of all materials. The type of toothbrushing solution partially has affected surface roughness.

Knowledge, Practices, and Perceptions about Tooth Whitening among Female Population in Saudi Arabia - A Cross-Sectional Study

Background:

Tooth-whitening procedures have gained wide popularity among the Saudi population. The present study aimed to assess the knowledge, attitude, and perception about tooth-whitening procedures among Jeddah's general population.

Materials and Methods:

A face-to-face interview was conducted on randomly selected female patients attending dental clinics. A pretested and structured questionnaire was used to record the response by calibrated interviewers. The responses regarding knowledge, attitude, and perceptions were recorded and subjected to statistical analysis.

Results:

The findings showed that the prevalence of tooth whitening among the participants was 43.7%, and about 8.7% reported that they did it once every year. In-office bleaching was the most preferred method (31.4%), followed by whitening toothpaste (8.7%). An increased frequency of bleaching was reported by participants belonging to younger age group (P < 0.001).

Conclusion:

The knowledge related to the mechanism of action and adverse effects was average among the participants. Younger age groups were more concerned about tooth-whitening procedures compared to the older ones.

The impact of tooth colour on the perceptions of age and social judgements

OBJECTIVE

Psychological research has established that the presence of dental anomalies negatively impact social judgements. This study sought to determine the effects of tooth colour on the subjective ratings of social judgements in a group of Caucasian adults.

METHODS

A cross sectional experimental analogue design comprised fifty Caucasian adults: 25 women and 25 men. A total of 54 digitally modified photographs of Caucasian males and females (darkened, natural, whitened teeth) were evaluated. All participants evaluated each of the images on 12 characteristics: popularity, friendliness, social life, success, graduation, happiness, intelligence, perceived age, introversion/extraversion, self-confidence, attractiveness and satisfaction with the tooth shade. Analysis of variance (ANOVA) was used to compare ratings.

RESULTS

Participants associated darkened teeth with poorer subjective ratings, with the highest ratings been given to whitened teeth, and natural teeth being intermediate. These trends were similar across all participant age groups and gender. Further, the gender and age groups of the images had a significant effect on the appraisals. Faces of younger models received higher ratings than the faces of older models and female images were rated higher than the males.

CONCLUSION

In the absence of other information, tooth colour exerts an influence upon the appraisals made in social situations. It appears that whitened tooth appearance is preferred to natural tooth appearance, irrespective of age and gender of the judge. The faces with more whitened dentition are perceived to be younger across all age groups and gender of the judges. Participants dissatisfied with their own tooth shade drew out more stereotypic behaviour.

CLINICAL SIGNIFICANCE STATEMENT

This research used standardised tooth colour as a basis to investigate perceived age and social functioning. As clinicians face daily challenges to achieve patient satisfaction with respect to dental aesthetics, standardizing the colour may enhance the patients' satisfaction. Further, participants dissatisfied with their own tooth shade drew out more stereotypic behaviour. The whitened dentition may impair the psychological well-being of the individuals and is probably a reason for the increasing demand for cosmetic dental procedures. These results may be instructive for the development of a psycho-educational intervention to prevent any unrealistic expectations.

Reduction of extrinsic tooth stain by a toothpaste containing 10% high cleaning silica, 0.5% sodium phytate and 0.5% sodium pyrophosphate: an 8-week randomised clinical trial

Objective

To assess the effects for controlling extrinsic tooth stain of a whitening toothpaste containing 10% high cleaning silica, 0.5% sodium phytate and 0.5% sodium pyrophosphate, in comparison with a negative control toothpaste.

Methods

A total of 86 adults who met with the inclusion and exclusion criteria were invited to take part in the study. They were distributed into test and control groups randomly. At baseline, 4 weeks and 8 weeks, the same examiner provided the clinical examinations, including evaluations of oral soft and hard tissues and measurements of tooth stain of the anterior teeth using the Lobene Stain Index. Adverse events and any changes in general health conditions of the patients were monitored.

Results

When the study was completed, comparisons between patients in test and control groups yielded statistically significant differences in Lobene stain adjusted mean area score [0.83 (0.05) vs. 1.13 (0.05)], Lobene stain adjusted mean intensity score [0.99 (0.06) vs. 1.32 (0.06)] and Lobene stain adjusted mean composite score [1.45 (0.13) vs. 2.50 (0.13)] (All, P < 0.001). Patients in the test group exhibited reductions of 26.55%, 25% and 42%, respectively in Lobene stain area, intensity and composite scores, relative to patients in the control group. Comparisons within groups showed that all three Lobene scores at 8 weeks in both groups were lower than those at baseline (All, P < 0.001).

Conclusion

This study demonstrates that 8-week use of a toothpaste containing 10% high cleaning silica, 0.5% sodium phytate and 0.5% sodium pyrophosphate can effectively reduce extrinsic tooth stain.

Trial registration NCT04238429 (before enrollment of the first participant). Data register: March 4, 2018.

Perception about tooth colour and appearance among patients seen in a tertiary hospital, South-West, Nigeria

Introduction

patients´ satisfaction with their dental appearance and tooth colour is often influenced by certain factors which need to be addressed periodically among different populations.

Methods

a self-administered questionnaire consisting of sociodemographic data, questions on patients´ satisfaction with tooth colour, perceived malalignment of teeth, non-aesthetic anterior tooth-coloured restoration and presence of tooth fracture were distributed. Data collected was analysed using Statistical Package for Social Sciences (IBM, SPSS version 20). Chi square was used to test the statistical differences at a significance of p> 0.05.

Results

a total of 410 patients (M=147, F=263) participated in the study. About 73% had tertiary education while 36.3% were within the modified ISCO-08 Group 2. The respondents that were satisfied with the general dental appearance and tooth shade were 66.3% and 63.5% respectively. More males (65.1%) than females (62.7%) were satisfied with tooth colour while more females (69.1%) were satisfied with dental appearance. The older age group were more satisfied with dental appearance and tooth colour. Awareness of tooth whitening (Over 80%) and the desire to undergo tooth whitening was more among the post-secondary individuals. More of dental patients (73.1%) than medical (59.2%) were satisfied with teeth appearance (p=0.003).

Conclusion

patients are increasingly aware of their dental appearance/tooth colour and the need to improve it with tooth bleaching and/or orthodontic treatment. Female were more dissatisfied with their tooth colour but more satisfied with their dental appearance than the male. Older people were more satisfied with their dental appearance and tooth colour compared to younger age group.

The whitening effect of single brushing with blue-covarine containing toothpaste-A randomized controlled trial

OBJECTIVE

To evaluate whether a blue covarine containing silica-based toothpaste promotes a whitening effect immediately after tooth brushing.

METHODS

A triple-blind, parallel group, randomized design was used to compare the tooth color before and after brushing. Two silica-based toothpastes were chosen, one of them containing blue covarine (BCT) and the other one without pigment to serve as control (CT). Tooth color was measured using a spectrophotometer and expressed as CIEDE 2000 ΔE, CIELAB values, WIO index, WI_D index and VITA scale tooth shade. In addition, the participants' satisfaction with and perception of their own tooth color were registered using an aesthetic numeric analogue scale.

RESULTS

No significant changes in color components or dimensions measured using CIEDE 2000 ΔE (CT: mean = 1.3, 95% CI 0.8, 1.7; BCT: mean = 1.6, 95% CI 1.2, 2.1), WIO, WI_D, VITA scale or CIELAB values were detected for the CT and BCT groups, comparing the results before and after brushing. Likewise, the participants' satisfaction with the treatment results (P = 0.31) and the participants' evaluation of tooth color (P = 0.71) did not differ significantly between groups.

CONCLUSION

After a single application, no significant improvement in tooth whiteness by the presence of blue covarine in a silica-based toothpaste was detected in color dimensions or by assessing the participants' satisfaction and perception.

CLINICAL SIGNIFICANCE

The present study does not show a clinically relevant increase in tooth whiteness after a single brushing with a blue covarine containing toothpaste, nor could the study participants observe a difference between treatment with blue covarine containing toothpaste and control treatment.

Analysis of chemical deposits on tooth enamel exposed to total particulate matter from cigarette smoke and tobacco heating system 2.2 aerosol by novel GC-MS deconvolution procedures

Tobacco smoking contributes to tooth discoloration. Pigmented compounds in the smoke generated by combustion of tobacco can cause discoloration of dental hard tissues. However, aerosols from heated tobacco products cause less discoloration than cigarette smoke (CS) in vitro. The objective of the present study was to optimize a method for extracting the colored chemical compounds deposited on tooth enamel following exposure to total particulate matter (TPM) from CS or a heated tobacco product (Tobacco Heating System [THS] 2.2), analyze the extracts by gas chromatography coupled to time-of-flight mass spectrometry, and identify the key chemicals associated with tooth discoloration. Sixty bovine enamel blocks were exposed for 2 weeks to TPM from CS or THS 2.2 aerosol or to artificial saliva as a control. Brushing without toothpaste and color measurements were performed each week. Noticeable discoloration of enamel was observed following exposure to CS TPM. The discoloration following exposure to THS 2.2 aerosol TPM or artificial saliva was not distinguishable to the eye (ΔE < 3.3). Carbon disulfide was used to extract surface-deposited chemicals. Untargeted analyses were followed by partial least squares correlation against discoloration scores (R2 = 0.96). Eleven compounds had variable importance in projection scores greater than 2. Discriminant autocorrelation matrix calculation of their mass spectral information identified eight of the eleven compounds as terpenoids. None of the compounds were related to nicotine. Several of these compounds were also detected in THS 2.2 aerosol TPM-exposed enamel, but at lower levels, in line with our findings showing less discoloration. Compared with CS TPM exposure, THS 2.2 aerosol TPM exposure resulted in lower deposition of color-related compounds on enamel surface, consistent with minimal discoloration of dental enamel.

Effect of an Optical Whitening Toothpaste on Color Stability of Tooth-Colored Restorative Materials

Objectives  This study aimed to assess the effect of an optical whitening toothpaste on color stability of microhybrid, nanofilled, and microfilled composite resins and resin-modified glass ionomer (RMGI) cement in comparison of two other toothpastes.

Materials and Methods  In this experimental study, disc-shaped composite samples were fabricated. The samples were then polished using silicon carbide papers. Twenty-seven samples of each material were fabricated and subjected to colorimetry using a spectrophotometer. Each group of material was then divided into three subgroups for the application of conventional whitening and whitening containing blue covarine toothpastes. One operator brushed the samples with an electric soft toothbrush with circular motion twice a day, each time for 30 seconds. Colorimetry was performed at 0, 1, 7, 30, and 90 days.

Statistical Analysis  Two-way analysis of variance (ANOVA), one-way ANOVA, and Tukey’s honestly significant difference (HSD) test were used for statistical analysis.

Results  The interaction effect of type of restorative material and time on ∆E was not significant at baseline or 1 day ( p > 0.05). The effect of type of toothpaste on ∆E was not significant at baseline or 1 day ( p = 0.78) but the effect of type of material was significant ( p < 0.05). The toothpastes had significantly different effects on ∆E of Z250 at all time points ( p < 0.05) except for ∆E0–30 ( p = 0.106). The toothpastes had significantly different effects on ∆E of Z350 and Gradia at all time points ( p < 0.05). The same was true for RMGI except for ∆E0–7 ( p = 0.43) and ∆E0–90 ( p = 0.52). The majority of color changes caused by toothpastes were not clinically perceivable (∆E < 3.3), except for ∆E0–90 by the whitening toothpaste (∆E = 9), ∆E0–90 by the conventional toothpaste for Z350 (∆E = 3.9), and ∆E0–1 by the whitening toothpaste for RMGI (∆E = 3.7).

Conclusion  The color change of all composite samples was not clinically perceivable (<3.3) at all time points, which shows that the tested toothpastes do not cause a significant change in color of composite materials.

The effect of oral anti-inflammatory drugs on reducing tooth sensitivity due to in-office dental bleaching: A systematic review and meta-analysis

BACKGROUND

The authors' aim was to evaluate the effectiveness of anti-inflammatory drugs on tooth sensitivity (TS) during and after in-office dental bleaching procedures.

TYPES OF STUDIES REVIEWED

The authors selected randomized controlled trials in which the investigators compared anti-inflammatory drugs with a placebo to evaluate in-office dental bleaching TS. The authors performed an electronic search by using PubMed, ScienceDirect, and Embase. In addition, the authors searched other Web sites, such as ClinicalTrials.gov, to identify ongoing studies.

RESULTS

The authors included 7 randomized controlled trials (324 adults) in the review. According to the extracted data, the authors performed the meta-analysis by using risk ratios and their 95% confidence intervals or by using the mean difference with a 95% confidence interval. The authors used the Cochrane Collaboration's tool to assess study quality. After the evaluation, the authors considered 6 studies to be high quality and a single study to be low quality. The overall results of the evaluation process revealed the absence of a clinically significant effect of anti-inflammatory drugs.

CONCLUSIONS AND PRACTICAL IMPLICATIONS

The results of this analytic process indicated that anti-inflammatory drugs have no clinically significant effect on the TS that occurs due to in-office bleaching. Readers must analyze these results carefully given the limitations of this review, such as the small samples size and the heterogeneity among the studies in some stages of the evaluation process. The results of this analytical study highlight the need for more clinical studies to reach a significant conclusion because TS is one of the most important reasons for the cessation of bleaching treatment.

Influence of different types of whitening tooth pastes on the tooth color, enamel surface roughness and enamel morphology of human teeth

Background: Tooth whitening usually includes the direct use of gels containing carbamide or hydrogen peroxide on the tooth enamel surface through a wide variety of products formulas. A generally new advancement in whitening of teeth uses the significant importance of the tooth color shift from yellow to blue in delivering a general enhancement in the observation of tooth whiteness. The aim of the current work was to measure the tooth whitening effects, surface roughness and enamel morphology of six different types of blue covarine-containing and blue covarine-free toothpastes using in vitro models. Methods: A total of 70 sound extracted human premolars were randomly and equally divided into seven groups, and each subjected to tooth brushing using different toothpastes. Tooth color and enamel surface roughness were measured before and after the brushing procedure using a white light interferometer, and scanning electron microscopy (SEM) was used to assess tooth surface after the procedure. Results: Toothpaste containing blue covarine resulted in the greatest improvement in tooth color amongst all groups as well as a statistically significant color difference when compared to blue covarine-free toothpaste.  Furthermore, blue covarine-containing toothpaste resulted in fewer morphological changes to the enamel surface. This was confirmed with SEM images that showed smooth enamel surfaces with fine scratches.   Conclusions: The results from the present study show that blue covarine containing toothpastes are reliable, effective in tooth whitening and produce less surface abrasion when compared to blue covarine-free toothpastes.

Oral and Dental Status of Lebanese and Syrian Refugees Living in Proximity to Deir Kanoun Ras El Ain Dump in Lebanon

Aims:

In this study, we aimed at investigating the oral and dental health conditions of Lebanese and Syrian refugees living in proximity to Deir Kanoun Ras El Ain dump whereby its leachates influx into a canal used for irrigation and drinking purposes.

Materials and Methods:

This observational study involved oral and dental examinations of 589 Lebanese and Syrian Refugees participants living in the three villages: Deir Kanoun Ras El Ain, Klayleh, and Smaiyeh. Differences in oral and dental examination results were analyzed between different villages, sexes, nationalities, and age groups. Correlation tests were conducted between dental fluorosis, staining, papilla swelling, and several sociodemographic factors.

Results:

Dental fluorosis, staining, and papilla swelling were the most prominent problems among total participants. The highest percentages of individuals with the studied diseases were shown to be in Klayleh village, among females, and individuals aged between 21 and 40 years. Significant associations were observed between dental fluorosis and nationality; between dental staining and gender, nationality, age, and smoking; as well as between papilla swelling and age, smoking, and diabetes.

Conclusions:

Our study investigated and highlighted the prevalence of several oral and dental diseases among Lebanese and Syrian inhabitants that are related to environmental, social, and economic determinants and not just by individual behaviors. It also showed gaps of oral and dental health knowledge that recommend implementing health systems that focus on preventing oral diseases.

A study on the color distribution of natural teeth by age and gender in the Korean population with an intraoral spectrophotometer

OBJECTIVE

To investigate the distribution of natural tooth shades by age and gender in the Korean population with a spectrophotometer.

MATERIAL AND METHODS

A total of 674 human subjects were recruited and divided into three age groups; young (16-30), middle (31-59), and elderly (60-89). Each group was then subdivided according to gender. Color was measured on the upper central incisor and CIELab color coordinates were obtained. CIEDE2000 color differences ( ΔE₀₀ ) between genders within each age group and between age groups for both genders were calculated. Two-way analysis of variance (ANOVA) was used to identify the influence of age and gender on each color variable.

RESULTS

The most frequent color in the Korean population was 2L1.5. L* values decreased, while b* values increased with age (P < .05). There was a significant interaction between gender and age on b* values; F (2668) = 3.489, P = .031, partial η²  = 0.010, and observed power = 0.652. Females generally have lighter and less chromatic central incisors compared to males. The ΔE₀₀ values between genders in elderly groups were beyond acceptability threshold.

CONCLUSIONS

The central incisors were getting darker, more yellowish, and reddish with age. Information on the chromatic range of natural teeth by age and gender could help to select colors for esthetic dental restorations.

CLINICAL SIGNIFICANCE

Dentists should consider an unacceptable color mismatch between the restorations and natural dentition that can occur over time.

Evaluation of Natural Tooth Color Space of the Indian Population and Its Comparison to Manufacturer's Shade Systems

PURPOSE

This study evaluated the natural tooth color space of the Indian population and compared it with the manufacturer's shade systems.

MATERIALS AND METHODS

Maxillary central incisors of individuals aged 18-30 years and shade tabs of Vita Lumin vaccum (VL), Vitapan 3D master (V3D), and Shofu's Vintage Halo (SVH) shade guide were digitally photographed under standardized conditions. L*a*b* values from middle part of tooth and shade tab were attained using Adobe Photoshop 7.0 software. Comparative evaluation between the natural teeth and shade tabs was done, and color differences were noted and analyzed using appropriate software.

RESULTS

The L*a*b* values of the Indian population displayed a broader range than the shade guides. The mean Δ E* for VL shade guide was 7.22, 7.99 for SVH, and 8.39 for V3D, which was statistically significant. Color space of the Indian population on displayed an elongated cone with an irregular base. The plots of all the three shade guides were narrower and shorter and deficient in the blue-green region as compared to the population.

CONCLUSIONS

Within the limitations of this study, the mean color difference between the Indian population and the three shade guides was above the acceptability thresholds (ΔE* = 2.7-6.8). VL, V3D, and SVH shade guides were deficient in their coverage and therefore can be considered inconsistent.

Effectiveness of a new non-hydrogen peroxide bleaching agent after single use - a double-blind placebo-controlled short-term study

Tooth whitening represents perhaps the most common aesthetic procedure in dentistry worldwide. The efficacy of bleaching depends on three aspects: bleaching agent, bleaching method, and tooth color.

Tooth colour and whiteness: A review

OBJECTIVES

To review current knowledge concerning the application of colour science on tooth colour and whiteness description, measurement, distribution and its psychological impact.

DATA SOURCES

"Scopus" databases were searched electronically with the principal keywords tooth, teeth, colour, white, whiteness. Language was restricted to English and original studies and reviews were included. Conference papers and abstracts were excluded.

CONCLUSIONS

The appearance and colour of teeth are a common concern for patients across many populations and are associated with an increased desire for treatments that improve dental aesthetics, including tooth whitening. The application of colour science in dentistry has allowed the precise description of tooth colour and whiteness. Coupled with the advances in instrumental tooth colour measurement, such as spectrophotometers, colorimeters, spectroradiometers and digital imaging systems, these parameters are quantifiable in a reproducible and robust manner. These principles have been applied to the tooth colour distribution in many study populations, indicating, in general, differences in tooth colour for subject age and gender, but not for ethnicity. Psychophysical studies on tooth colour and whiteness via third party assessment of images indicate that whitened teeth lead to judgements that are more positive on personality traits such as social competence and appeal, intellectual ability and relationship satisfaction.

An in vitro screening assay for dental stain cleaning

BACKGROUND

The present study aimed to develop an in vitro model for stain removal from natural enamel for the assessment and comparison of oral hygiene products.

METHODS

Bovine teeth (n = 8 per group) were ground/polished to provide flat enamel specimens and ferric-tannate deposits were precipitated onto the enamel surfaces. The ferric-tannate stained enamel specimens were brushed using an in vitro tooth-brushing simulator with slurries containing commercially available toothpaste products, dental abrasive particles, and sodium tripolyphosphate (STP) solutions of different concentrations. The colour of the enamel surfaces was measured using a spectrophotometer before and after stain application as well as after the brushing treatments.

RESULTS

Differences in stain removal efficacy were found between the toothpastes categorised as whitening and non-whitening comprising of different types of dental abrasives (hydrated silica and alumina). A mean value of 27% for stain removal was detected for the three non-whitening toothpastes and 59% of stain removal was detected for the three whitening toothpastes after 1000 strokes. Compared with the slurry with Zeodent 113 abrasive alone, the addition of STP provided better performance for stain removal under the same brushing conditions (mean value of 62% for Zeodent 113 abrasive alone and 72% with the addition of 5% (w/w) STP after 1000 strokes). No difference was evident between the STP concentration of 5% (w/w) and 10% (w/w).

CONCLUSIONS

The ferric-tannate/bovine enamel model reported here provides good stain retention, is rapidly and easily prepared, and is shown to be progressively and reproducibly sensitive to toothbrushing using different toothpastes and surfactant/chelating agent solutions. Importantly, it provides good discrimination between various oral hygiene products. The stain removal assay reported here has considerable potential to enable comparative assessments of different toothpaste types in terms of their cleaning capabilities.

Comparison of efficacy of tray-delivered carbamide and hydrogen peroxide for at-home bleaching: a systematic review and meta-analysis

OBJECTIVES

The aim of the study was to compare the color change produced by tray-delivered carbamide peroxide [CP] versus hydrogen peroxide products [HP] for at-home bleaching through a systematic review and meta-analysis.

MATERIALS AND METHODS

MEDLINE via PubMeb, Scopus, Web of Science, Latin American and Caribbean Health Sciences Literature database (LILACS), Brazilian Library in Dentistry (BBO), and Cochrane Library and Grey literature were searched without restrictions. The abstracts of the International Association for Dental Research (IADR) and unpublished and ongoing trial registries were also searched. Dissertations and theses were explored using the ProQuest Dissertations and Periodicos Capes Theses databases. We included randomized clinical trials that compared tray-delivered CP versus HP for at-home dental bleaching. The color change in shade guide units (SGU) and ΔE were the primary outcomes, and tooth sensitivity and gingival irritation were the secondary outcomes. The risk of bias tool of the Cochrane Collaboration was used for quality assessment.

DATA

After duplicate removal, 1379 articles were identified. However, only eight studies were considered to be at "low" risk of bias in the key domains of the risk bias tool and they were included in the analysis. For ΔE, the standardized mean difference was -0.45 (95 % CI -0.69 to -0.21), which favored tray-delivered CP products (p < 0.001). The color change in ΔSGU (p = 0.70), tooth sensitivity (p = 0.83), and gingival irritation (p = 0.62) were not significantly different between groups.

CONCLUSIONS

Tray-delivered CP gels showed a slightly better whitening efficacy than HP-based products in terms of ΔE, but they were similar in terms of ΔSGU. Both whitening systems demonstrated equal level of gingival irritation and tooth sensitivity.

CLINICAL SIGNIFICANCE

Tray-delivered CP gels have a slightly better whitening efficacy than HP-based products in terms of ΔE. This should be interpreted with caution as the data of ΔSGU did not show statistical difference between the products.

Study of the most frequent natural tooth colors in the Spanish population using spectrophotometry

PURPOSE

To identify the most frequent natural tooth colors using the Easyshade Compact (Vita -Zahnfabrik) spectrophotometer on a sample of the Spanish population according to the 3D Master System.

MATERIALS AND METHODS

The middle third of the facial surface of natural maxillary central incisors was measured with an Easyshade Compact spectrophotometer (Vita Zahnfabrik) in 1361 Caucasian Spanish participants aged between 16 and 89 years. Natural tooth color was recorded using the 3D Master System nomenclature. The program used for the present descriptive statistical analysis of the results was SAS 9.1.3.

RESULTS

The results show that the most frequent dental color in the total sample studied is 3M1 (7.05%), followed by the intermediate shade 1M1.5 (6.91%) and 2L1.5 (6.02%).

CONCLUSION

According to the research methodology used, and taking into account the limitations of this study, it can be proposed that the most frequent color among the Spanish population is 3M1; the most common lightness group is 2; the most frequent hue group according to the 3D Master System is M and the most frequent chroma group is 1.5.

Satisfaction with Dental Appearance and Attitude toward improving Dental Esthetics among Patients attending a Dental Teaching Center

AIM

The aim of this study was to evaluate the factors influencing the satisfaction of dental appearance and attitude toward treatments to improve dental esthetics among patients attending a dental teaching center.

METHODS

A questionnaire was used to collect data of four background variables among 450 patients attended a dental teaching center in the city of Irbid in Jordan. The questionnaire enclosed self-reported questions about the appearance of anterior teeth, received esthetic treatment and desired treatment for improving esthetics. Descriptive, multiple logistic regression and Chi-square tests were used for data analysis (p ≤ 0.05).

RESULTS

The 450 participants consisted of (66.2%) male and (33.8%) female. Of these, 69.3% were satisfied with their dental appearance and 58.0% with the color of their teeth. Esthetic restorations were the most received treatment (39.8%) and whitening of teeth was the most desired treatment (55.3%). The patients' satisfaction with dental appearance was influenced by teeth color, crowding and receiving whitening (p < 0.05. r = 0.561, r(2) = 0.315). The most desired esthetic treatments influenced by the satisfaction with dental appearance were esthetic restorations and orthodontics (p < 0.05. r = 0.223, r(2) = 0.05). Significantly more female reported having esthetic restorations and orthodontics (p = 0.008, 0.000) and desired to have orthodontic, crowns or veneers and esthetic restorations (p = 0.000, 0.015, 0.028).

CONCLUSION

Satisfaction with dental appearance was affected by teeth color, feeling teeth are crowded, desire for esthetic restorations and orthodontic treatment. A high percentage of patients were not satisfied with the color of their teeth.

CLINICAL SIGNIFICANCE

Recognizing the factors that affect patients' satisfaction with their present dental appearance and attitude toward treatments to improve dental esthetic can guide clinicians to strategies to improve esthetics.

Natural Tooth Color Estimation Based on Age and Gender

PURPOSE

Assessment of the predictability of tooth color coordinates according to the CIELab system to estimate the color of the maxillary central incisor based on patient age and gender.

MATERIAL AND METHODS

The tooth color of one of the maxillary central incisors of 1361 Caucasian Spanish individuals aged 16 to 89 years, male and female, was measured using the Easyshade compact spectrophotometer. Color coordinates L*, C*, h*, a*, and b* were recorded according to age and gender.

RESULTS

The results obtained show that differences in age account for 45% of the total variation of the L (lightness) coordinate; 21% of the variation in coordinate a*, and 17% of the variation in coordinate b* is due to the same reason. At a confidence level of 95% it may be proposed that the mean estimated color difference (ΔE_ab *) between real natural color and that predicted by the linear regression model is between 6.4 and 6.9 units.

CONCLUSIONS

In this sample of Caucasians from Spain, teeth became darker yellow and more reddish with increasing age. The L* coordinate is most strongly related to tooth color in aging.

Correlation of natural tooth colour with aging in the Spanish population

OBJECTIVES

To analyse natural tooth colour in the Spanish population according to the colour coordinates lightness (L*), chroma (C*), hue (h*), red-green axis (a*) and yellow-blue axis (b*) in order to quantify the correlation and changes of tooth colour with age and sex.

METHODS

Natural tooth colour was measured in a sample of 1,361 Spanish participants of both sexes distributed within an age range of 16 to 89 years. The Easyshade Compact spectrophotometer was used and the CIELAB and CIELCh systems were followed.

RESULTS

Pearson's bivariate correlations between age and colour coordinates were highly significant for L* (r=-0.674, P≤0.001), h* (r=-0.468, P≤0.001) and C* (r=0.417, P≤0.001). The correlation between age and colour coordinates was stronger for men than for women, for all colour coordinates. The results showed that C*, b* and a* increased by 0.60, 0.56 and 0.26 units/year on average, respectively, whereas L* and h* decreased progressively with age (by 0.60 units/year, on average), and colour differences increased in a systematic way as the gap between the ages being compared grew wider.

CONCLUSIONS

The strongest correlation was found between age and L*, then between age and h* (both inverse relationships) and then between age and a*, C* and b* (direct relationships). In addition, a similar degree of change in the colour coordinates L*, C* and h* (of 0.60 units/year on average) was observed for natural tooth colour. Knowledge of the chromatic range of natural teeth may help to choose colour for the replacement of missing elements.

Identifying the tooth shade in group of patients using Vita Easyshade

Objective:

The aim of the present investigation is to identify tooth shade among a group of Sudanese patients.

Materials and Methods:

Total number of patients was 227. Participant's age ranged from 15 to 72 years, which, was divided into four groups. The tooth included in the study was either right or left sounds maxillary central incisor. Vita Easyshade was used to select the tooth shade. Investigation of the differences of Commission International de l’Eclairage (CIELab) coordinates among gender and state of origin was conducted together with an examination of the relationship between CIELab coordinates and age. One-way analysis of variance was used to test the differences in L*, a* and b* according to state of origin.

Results:

Results showed that A3 was the most common classical tooth shade respectively. There was highly significant difference in L* between males and females (P = 0.002). There was a significant relation between tooth shade and age (P = 0.026). There was a high significant association between classical tooth shade and Sudan regions (P = 0.00).

Conclusion:

In conclusion, most common classical shade was A3, women's teeth were lighter than men's. There was a relation between ethnic background and tooth shade.

The psychosocial impacts of implantation on the dental aesthetics of missing anterior teeth patients

OBJECTIVE

The aim of the current study was to investigate the psychosocial impact of dental aesthetics among patients who received anterior implant-supported prostheses.

METHODS

The current study is a cross-sectional evaluation involving 115 individuals who had gone through treatment at the dental clinics of general hospitals. Participants completed the Chinese version of the psychosocial impact of dental aesthetics questionnaire (PIDAQ) before implantation and six months after crown restoration. Basic demographic information was recorded. Six months after implant crown restoration, participants were asked to self-assess their own oral aesthetics compared to before implantation.

RESULTS

A total of 106 patients completed the study. PIDAQ scores correlated significantly with the self-assessment of the degree of oral aesthetics. Six months after crown restoration, the two factors (social impact and aesthetic attitude) decreased and the dental self-confidence score increased significantly compared to pre-implantation scores. Gender and education level significantly affected PIDAQ.

CONCLUSIONS

Anterior implant-supported prostheses significantly affected the patients' psychosocial perception. Implantation of missing anterior teeth can significantly improve patients' negative psychosocial impact of dental aesthetics. Gender and education level are correlated with the degree of improvement. The PIDAQ can be used in assessing the psychosocial effects of implantation in missing anterior teeth.

Evidence to suggest that teeth act as human ornament displays signalling mate quality

Ornament displays seen in animals convey information about genetic quality, developmental history and current disease state to both prospective sexual partners and potential rivals. In this context, showing of teeth through smiles etc is a characteristic feature of human social interaction. Tooth development is influenced by genetic and environmental factors. Adult teeth record environmental and traumatic events, as well as the effects of disease and ageing. Teeth are therefore a rich source of information about individuals and their histories. This study examined the effects of digital manipulations of tooth colour and spacing. Results showed that deviation away from normal spacing and/or the presence of yellowed colouration had negative effects on ratings of attractiveness and that these effects were markedly stronger in female models. Whitening had no effect beyond that produced by natural colouration. This indicates that these colour induced alterations in ratings of attractiveness are mediated by increased/decreased yellowing rather than whitening per se. Teeth become yellower and darker with age. Therefore it is suggested that whilst the teeth of both sexes act as human ornament displays, the female display is more complex because it additionally signals residual reproductive value.

The effects of light on bleaching and tooth sensitivity during in-office vital bleaching: a systematic review and meta-analysis

OBJECTIVE

To evaluate the influence of light on bleaching efficacy and tooth sensitivity during in-office vital bleaching.

DATA SOURCES

We performed a literature search using Medline, EMBASE and Cochrane Central up to September 2011.

STUDY SELECTION

All randomised controlled trials (RCTs) or quasi-RCTs comparing the light-activated bleaching system with non-activation bleaching system were included. Reports without clinical data concerning bleaching efficacy or tooth sensitivity were excluded.

RESULTS

Eleven studies were included in the meta-analysis. A light-activated system produced better immediate bleaching effects than a non-light system when lower concentrations of hydrogen peroxide (15-20% HP) were used (mean difference [MD], -1.78; 95% confidence interval [CI]: [-2.30, -1.26]; P<0.00001). When high concentrations of HP (25-35%) were employed, there was no difference in the immediate bleaching effect (MD, -0.39; 95% CI: [-1.15, 0.37]; P=0.32) or short-term bleaching effect (MD, 0.25; 95% CI: [-0.47, 0.96]; P=0.50) between the light-activated system and the non-light system. However, the light-activated system produced a higher percentage of tooth sensitivity (odds ratio [OR], 3.53; 95% CI: [1.37, 9.10]; P=0.009) than the non-light system during in-office bleaching.

CONCLUSIONS

Light increases the risk of tooth sensitivity during in-office bleaching, and light may not improve the bleaching effect when high concentrations of HP (25-35%) are employed. Therefore, dentists should use the light-activated system with great caution or avoid its use altogether. Further rigorous studies are, however, needed to explore the advantages of this light-activated system when lower concentrations of HP (15-20%) are used.

Effect of nano-carbonate apatite to prevent re-stain after dental bleaching in vitro

OBJECTIVES

This study examined the effect of nano-carbonate apatite (n-CAP) to prevent re-staining and the change of enamel surface after dental bleaching in vitro.

METHODS

Twenty-four bovine specimens were bleached for 2 weeks with 10% carbamide peroxide (CP). After bleaching, the specimens were divided into the following four groups: distilled and deionized water (DDW, negative control), 10% n-CAP, NaF (positive control) and casein phosphopeptide-amorphous calcium phosphate (CPP-ACP, positive control). Each group was subjected to pH cycling for 7 days. The specimens were treated for 4 min 3 times per day and re-staining was induced naturally by artificial saliva in the remineralization process. After pH cycling, the changes in colour were evaluated with spectrophotometry and scanning electron microscopy (SEM). The difference in colour between before and after pH cycling was evaluated using an ANOVA and Tukey test.

RESULTS

After pH cycling, the colour difference of n-CAP group was significantly lower than that of the DDW and CPP-ACP groups (p<0.05). SEM showed that n-CAP particles were deposited regularly on the damaged surface compared to the other groups.

CONCLUSION

10% n-CAP could significantly maintain the initial colour and protect the damaged enamel structure after bleaching.

Factors influencing patient satisfaction with dental appearance and treatments they desire to improve aesthetics

Background

We assessed factors influencing patients' satisfaction with their dental appearance and the treatments they desired to improve dental aesthetics.

Methods

A cross-sectional study was performed out among 235 adult patients who visited the Hospital Universiti Sains Malaysia dental clinic. A structured, interviewer-guided questionnaire was used to identify patient satisfaction with their general dental appearance, cosmetic elements and desired treatments.

Results

The 235 patients consisted of 70 males (29.8%) and 165 females (70.2%), of mean age 31.5 years (SD 13.0). Of these patients, 124 (52.8%) were not satisfied with their general dental appearance. In addition, 132 patients (56.2%) were not happy with the color of their teeth, 76 (32.3%), regarded their teeth were poorly aligned, 62 (26.4%), as crowded and 56 (23.4%) protruded. Dissatisfaction with tooth color was significantly higher in female than in male patients (odds ratio [OR] of 1.99 (95% confidence interval [CI] 1.13-3.50). Tooth whitening was the treatment most desired by patients (48.1%). Results of multiple logistic regression analysis showed that patient dissatisfaction with general dental appearance was significantly associated with female gender (OR = 2.18; 95% CI: 1.18-4.03), unhappiness with tooth color (OR = 3.05; 95% CI: 1.74-5.34) and the opinion that their teeth protruded (OR = 2.91, 95% CI: 1.44-5.91).

Conclusions

Most patients in this study were not satisfied with their dental appearance with a greater percentage of females expressing dissatisfaction than males. An age was not associated with satisfaction. Unhappiness with tooth color and feelings of having protruding teeth also had a significant negative influence on patient satisfaction with general dental appearance.

Factors influencing patient satisfaction with dental appearance and treatments they desire to improve aesthetics

BACKGROUND

We assessed factors influencing patients' satisfaction with their dental appearance and the treatments they desired to improve dental aesthetics.

METHODS

A cross-sectional study was performed out among 235 adult patients who visited the Hospital Universiti Sains Malaysia dental clinic. A structured, interviewer-guided questionnaire was used to identify patient satisfaction with their general dental appearance, cosmetic elements and desired treatments.

RESULTS

The 235 patients consisted of 70 males (29.8%) and 165 females (70.2%), of mean age 31.5 years (SD 13.0). Of these patients, 124 (52.8%) were not satisfied with their general dental appearance. In addition, 132 patients (56.2%) were not happy with the color of their teeth, 76 (32.3%), regarded their teeth were poorly aligned, 62 (26.4%), as crowded and 56 (23.4%) protruded. Dissatisfaction with tooth color was significantly higher in female than in male patients (odds ratio [OR] of 1.99 (95% confidence interval [CI] 1.13-3.50). Tooth whitening was the treatment most desired by patients (48.1%). Results of multiple logistic regression analysis showed that patient dissatisfaction with general dental appearance was significantly associated with female gender (OR = 2.18; 95% CI: 1.18-4.03), unhappiness with tooth color (OR = 3.05; 95% CI: 1.74-5.34) and the opinion that their teeth protruded (OR = 2.91, 95% CI: 1.44-5.91).

CONCLUSIONS

Most patients in this study were not satisfied with their dental appearance with a greater percentage of females expressing dissatisfaction than males. An age was not associated with satisfaction. Unhappiness with tooth color and feelings of having protruding teeth also had a significant negative influence on patient satisfaction with general dental appearance.

Whitening toothpastes: a review of the literature

OBJECTIVES

To review and summarise the whitening agents contained within tooth whitening toothpaste formulations, their mode of action in tooth whitening, and the in vitro and clinical methods used to evaluate and demonstrate their efficacy.

METHODS

Original scientific full papers or reviews listed in ISI Web of Science and Medline were included in this review using the search terms white*, toothpaste and dentifrice.

CONCLUSIONS

Due to the reported consumer and patient dissatisfaction with their perceived tooth color, toothpaste manufacturers have responded by developing a vast array of contemporary whitening toothpastes. One of the key functional ingredients in whitening toothpastes is the abrasive system. In general, these have been designed to give effective removal of extrinsic stains and help prevent tooth stains from reforming without undue abrasivity towards the dental hard tissues. Whitening toothpastes may contain additional agents that augment the abrasive cleaning by aiding the removal and/or prevention of extrinsic stains, for examples, peroxide, enzymes, citrate, pyrophosphate and hexametaphosphate, or optical agents such as blue covarine which can improve tooth whiteness following tooth brushing. In vitro methods used to evaluate tooth whitening efficacy typically determine the ability of a toothpaste formulation to remove/prevent model extrinsic stains on substrates such as enamel or hydroxyapatite or changes in the intrinsic color of tooth specimens. Clinical protocols for evaluating the efficacy of whitening toothpastes typically determine either stain removal or prevention, where changes in natural stain or chlorhexidine/tea induced stain are measured typically over 2-6 weeks. In some clinical studies the overall tooth color change was measured using techniques such as Vita shade guides, colorimeters and image analysis of digital photographs of teeth.