Effect of direct retainer and major connector designs on RPD and abutment tooth movement dynamics

Long-term assessment of the periodontal health of removable partial denture wearers: A systematic review and meta-analysis

STATEMENT OF PROBLEM

The long-term effects of wearing removable partial dentures (RPDs) remain unclear.

PURPOSE

This systematic review addressed the question "Is the long-term use of RPDs deleterious to the remaining teeth?"

MATERIAL AND METHODS

This review was guided by the preferred reporting items for systematic reviews and meta-analyses (PRISMA) checklist. Six databases and nonpeer-reviewed literature were searched in April 2024 without language or follow-up restrictions. Only clinical studies evaluating RPD long-term use were included. The risk of bias and evidence certainty were assessed (RoB 2.0; ROBINS-I; GRADE), and meta-analyses were conducted for survival rate and periodontal health (α=.05).

RESULTS

A total of 5577 records were identified, and 46 studies covering data from 4359 prostheses and 4072 participants (mean age 60 ±5.2 years) were included. A low to moderate risk of bias was found. A 5-year survival rate of 95.1% (ER=0.951; 95% CI=0.900 to 0.977; P<.001) and 91.7% (ER=0.917; 95% CI=0.870 to 0.948; P<.001) was found for cast-clasp RPD and RPDs retained by telescopic crowns respectively, with no difference between them (P=.71). Abutments (OR=1.99, 95% CI=1.32 to 3.01; P=.001) and nonvital teeth (HR=2.961; 95% CI=2.023 to 4.335; P<.001) presented a higher risk of extraction after 5 years. Tooth mobility (P=.98) and probing depth (P=.50) remained unchanged, while the gingival index increased (MD=0.477 (95% CI=0.12 to 0.83; P=.008).

CONCLUSIONS

A high survival rate was found for both cast-clasp RPD and RPDs retained by telescopic crowns, with few periodontal changes to the remaining teeth.

Effect of mandibular bilateral distal extension denture design on masticatory performance

PURPOSE

Removable partial dentures have a wide range of applications as missing tooth prostheses, and the denture design can be quite diverse. However, the factors affecting masticatory function remain unclear. We investigated the effect of denture design, especially the use of indirect retainers and major connectors, on masticatory function in patients with mandibular bilateral distal extension dentures.

METHODS

Fifty-three patients with mandibular Kennedy Class I and Eichner classification B occlusal support were included in this study. Masticatory performance (MP) was assessed using gummy jelly. For the dentures, the type of major connector (bar or apron), presence or absence of indirect retainers, number of rests, and number of artificial teeth were evaluated. The number of functional teeth and occlusal support, Eichner classification, maxillary denture usage, mandibular residual ridge height, and duration of denture use were also evaluated. The factors influencing on the MP were evaluated using the Mann-Whitney U test, Spearman's correlation coefficient, and logistic regression analysis.

RESULTS

MP was significantly higher when the major connector was bar-type or when there was an indirect retainer than with an apron-type or no indirect retainer. MP was positively correlated with the number of functional teeth, occlusal support, and number of rests. Logistic regression analysis revealed that the number of functional teeth and the presence or absence of an indirect retainer were factors that significantly influenced the MP.

CONCLUSIONS

An indirect retainer setting is useful for achieving good masticatory performance in mandibular bilateral distal extension dentures.

Radiographic predictive factors for 10-year survival of removable partial denture abutment teeth: Alveolar bone level and density

PURPOSE

To determine postoperative periodontal and radiographic factors that predict the survival rates of abutments of removable partial dentures (RPDs).

METHODS

Patients who wore RPDs for > 10 years and received supportive periodontal therapy were included. Periodontal examinations and radiographic assessments were conducted on 83 abutment teeth in 35 patients at baseline, and five years after RPD insertion. In addition to conventional factors, such as tooth mobility at 5 years, radiographic factors, such as the crown-root ratio (ΔCR ratio) and gray-level changes reflecting changes in alveolar bone density (ΔABD), were evaluated. The impact of the covariables on the 10-year survival of abutment teeth was estimated using a multivariate Cox regression model, considering multicollinearity.

RESULTS

Patients were classified as having A2-B2 (45.7%) and B3-C2 (54.3%) tooth loss, according to the Eichner classification. A probing depth ≥ 4 mm, tooth mobility ≥ grade 1, and CR ratio ≥ 1 were found in 30.1%, 33.7%, and 51.8% of abutment teeth, respectively. The 10-year survival rate of abutment teeth was 86.7%. Multivariate analysis showed that the 10-year survival of abutment teeth was significantly associated with root canal treatment (P = 0.045, hazard ratio [HR] = 1.23), the 5-year ΔCR ratio (P = 0.022, HR = 3.20), and ΔABD on the edentulous side of the abutment teeth (P = 0.047, HR = 1.08).

CONCLUSIONS

In addition to root canal treatment, changes in the CR ratio and radiographic alveolar bone density at five years predicted the long-term survival rate of RPD abutments.

Assessment of Communication Quality through Work Authorization between Dentists and Dental Technicians in Fixed and Removable Prosthodontics

Fabrication of a clinically successful dental prosthesis requires clear and effective communication between dentists and dental technicians. Adequate completion of work authorization by dentists provides a means for increased professional quality assurance and satisfaction in dental prosthesis. The aim of this study was to evaluate the quality of communication between dentists and dental technicians via work authorization for fixed and removable dental prosthesis in Pakistan. This cross-sectional study was conducted for a period of 6 months to assess the quality of communication between dentists and dental technicians. A well-constructed questionnaire regarding work authorization of removable and fixed prostheses was used as a tool to collect data from 453 dentists. A linear regression analysis was performed to evaluate the relationship of the independent and dependent variables. A p value of ≤0.05 was considered statistically significant. It was observed that 92.1% of the dentists leave removable partial denture design to the dental technicians. About 56.5% of the dentists indicated information about base retention of partial dentures in work authorization. The majority of the dentists (56.5%) mentioned the material to be used for the construction of casting partial dentures. Nearly 66% of the dentists indicated the design of margins, and 44.6% of the dentists did not select the shade for fixed prostheses. Nearly 43% of the dentists did not draw the design of restoration, 21.9% chose to draw the design on paper, and 32.2% of the dentists drew the design on the cast. Meanwhile, 76.8% of the participants chose to directly communicate with their dental technicians personally. Nearly 41% of the dentists were satisfied with the restoration design, and 13.5% of the participants were not satisfied with the designs. Poor communication between dentists and technicians was observed, as the majority of the design decisions were left to the dental technicians. Therefore, communication between dentists and dental technicians should be improved by conducting combined workshops for the successful construction of dental prostheses.

Long-term observation of periodontal condition following placement of removable partial dentures with rigid retainers and major connector in patients with/without diabetes: A retrospective study

PURPOSE

This retrospective study evaluated the periodontal tissues of the abutment teeth of removable partial dentures (RPDs) with rigid retainers and major connectors in patients with and without type 2 diabetes mellitus (T2D).

METHODS

A total of 313 patients who had been treated with RPDs, including rigid retainers and major connectors, were divided into two groups: T2D and non-T2D. The periodontal parameters and radiographic bone heights of the abutment teeth were evaluated at baseline and at a 5-year examination during supportive periodontal therapy (SPT). For patients with accessible standardized radiographs, bone density was analyzed based on the gray level (GL) using digital subtraction radiography (n = 83).

RESULTS

Overall, 739 abutment teeth (86 in the T2D group) of 235 patients (25 in the T2D group) were analyzed, and 95.0% (94.2% in the T2D group, and 95.2% in the non-T2D group) were maintained. The mean probing pocket depth significantly increased in both groups ( p < 0.001). There were significant changes in the radiographic bone height (p = 0.038) and GL on the side of the denture base area (p = 0.048) in the T2D group compared to those in the non-T2D group.

CONCLUSIONS

Regardless of T2D, RPDs with rigid retainers and major connectors could prevent the progression of periodontal disease and successfully maintain most of the abutment teeth during 5-years of SPT. However, T2D may be significantly associated with loss of bone height reduction and density on the side of the denture base area.

Mechanical Evaluation of Implant-Assisted Removable Partial Dentures in Kennedy Class I Patients: Finite Element Design Considerations

The main purpose of this work was to construct a clinically valid numerical model of a mandibular Kennedy class I patient rehabilitated with a conventional removable partial denture and another two with implant-assisted removable partial dentures at two different implant locations. The selected patient was classified as ASA I and its mandible geometry reconstruction was performed by the conversion of the Cone-Beam computed Tomography (CBCT) scan raw medical data into a 3D model and subsequent conversion to a CAD file by reverse engineering methods. The soft tissue and removable denture geometries were also included in the CAD model as well as implants, ball attachments and matrix. Moreover, periodontal ligament was modelled by offsetting the mesh of the root surface of each tooth. The finite element results showed that the installation of a dental implant in each of the bilateral edentulous regions helps providing support and retention to the extension bases of the Removable Partial Denture (RPD) and significantly reduces the vertical and anterior-posterior displacements, regardless of its position.

Influence of rigidity of retainers on dynamic behavior of implant-supported removable partial dentures

Background

Implant-supported removable partial dentures (ISRPDs) are an effective treatment for partially edentulous patients. ISRPDs improve patients’ satisfaction and oral function to a greater extent than RPDs by improving denture stability and enhancing support. However, the effect of a type of direct retainer on displacement of the abutment teeth and dentures in ISRPDs remains unclear. Therefore, we made a resin mandibular model of unilateral mandibular distal-extension partial edentulism for mechanical simulation and compared the dynamic behavior of the abutment teeth and the denture base among different tooth-borne retainers with various rigidities for RPDs and ISRPDs.

Methods

A resin mandibular model for mechanical simulation that had unilateral mandibular distal-extension edentulism and was missing the first molar, second molar, first premolar, and second premolar, and a denture fabricated from the patient’s computed tomography images were used. Three types of direct retainers with different connecting rigidities were evaluated. The vertical displacement of the denture base and buccal and lingual sides and the mesial displacement of the abutment teeth were measured.

Results

Regardless of the rigidity of the direct retainers and loading positions, the displacement of the denture bases in the ISRPDs was significantly smaller than that in the RPDs (P < 0.001). There was no significant difference in vertical displacement of the denture bases among direct retainers with various connecting rigidities in the ISRPDs. Conversely, horizontal displacement of the abutment teeth in both the RPDs and ISRPDs tended to be larger with the cone crown telescope, which has high rigidity, than with the cast cingulum rest and wire clasp, which have much lower rigidities.

Conclusion

Our results suggested that cast cingulum rest and wire clasps as direct retainers are appropriate ISRPDs to minimize denture movement and suppress displacement of the remaining teeth in patients with unilateral mandibular distal-extension partial edentulism.

Influence of retainer and major connector designs of removable partial dentures on the stabilization of mobile teeth: A preliminary study

The purpose of this study was to investigate the influence of retainers and major connector designs on the stabilization of remaining mobile teeth using removable partial dentures (RPDs). We prepared experimental RPDs with several retainer designs and major connectors for lower Kennedy class I models. The simulated RPD insertion and removal test was conducted and retentive force and mobility of mobile remaining teeth with and without RPD placement were measured throughout a simulation test. Regardless of reduction of retentive force, the placement of RPDs using cast clasps and/or lingual plates resulted in reduced mobility of the remaining teeth than use of wrought wire clasps and/or lingual bars. The results suggested that cast clasps and lingual plates are effective for the stabilization of mobile, remaining teeth. Additionally, the stabilizing effect of RPD on abutment teeth was not diminished, despite decreases in retentive force.

Behavior of mandibular canines as abutment teeth and indirect retainers in Kennedy class II Removable Partial Denture Prosthesis

Purpose

The purpose of this study was to evaluate the behavior of mandibular canines acting as abutment teeth and indirect retainers of a Kennedy class II according to different designs: lingual rest and lingual rest associated with a reciprocal arm.

Materials & methods

A resin cast with two simulated canine teeth was made in Ni-Cr alloy, representing a Kennedy class II mandibular arch. With the objective of simulating the resilience of the periodontal ligament, a polyurethane layer was added at the canine tooth's root. A metallic framework of Co-Cr alloy was fabricated with a T bar clasp and a lingual rest associated with a reciprocal arm. To obtain the second framework, the reciprocal arm was removed using a tungsten bur. Each framework was submitted to tensile force using a VersaTest machine. The magnitude and direction of canine movement during removal of the framework was measured using two dial gauges (mm). The axial tensile force required to remove the experimental framework (N) was also evaluated. The data were compared using the paired t-test with 95% confidence intervals. Differences were considered significant at P < .05.

Results

The mean retentive force of the modified design framework with the reciprocal arm was significantly higher (P < .0001) than that of the framework with the lingual rest. The abutment teeth showed movement in the lingual and mesial directions, and this movement was less when associated with the reciprocal arm design.

Conclusion

The reciprocal arm in association with a lingual rest in the framework decreased the movement of the abutment teeth when analyzed in the bucco-lingual and mesio-distal directions and contributed to increased retention by friction.

Muscle activity and masticatory efficiency with bilateral extension base removable partial dentures with different cusp angles

STATEMENT OF PROBLEM

Whether masticatory efficiency and electromyographic activity are influenced by type of artificial teeth and food is unclear.

PURPOSE

The purpose of this clinical study was to evaluate the influence of extension base removable partial dentures (RPDs) with different cusp angles: anatomic (33 degrees), semianatomic (20 degrees), and nonanatomic (0 degrees) teeth on masticatory efficiency and muscle activity during the mastication of test foods with different textures.

MATERIAL AND METHODS

Twelve participants with RPDs were selected to perform masticatory efficiency and electromyographic tests. Surface electromyograms (EMGs) were used to record the activities of the masseter and temporalis muscles during the mastication of different types of test foods. The maximal voltage and duration were measured on the integrated EMG signal in each muscle during food mastication, and the mean reading of both sides was then recorded. Analysis of variance and the Tukey post hoc test were used to perform statistical analyses (α=.05).

RESULTS

The masticatory efficiency of RPDs with nonanatomic teeth was significantly inferior to that of RPDs with anatomic and semianatomic teeth (P<.05). However, masticatory efficiency did not differ between anatomic and semianatomic teeth (P>.05). Also, muscle activity (according to EMG) with RPDs with NA teeth was significantly higher than that with anatomic and semianatomic teeth (P<.05).

CONCLUSIONS

RPDs with NA teeth were associated with higher EMG muscle activity and reduced masticatory efficiency than anatomic or semianatomic teeth.

Influence of time and different tooth widths on masticatory efficiency and muscular activity in bilateral free-end saddles

PURPOSE

To evaluate the influence of time on masticatory efficiency and muscular activity during mastication of different types of test foods in participants fitted with a lower bilateral free-end saddle removable partial denture (RPD) with wide or narrow teeth.

METHODS

Thirty-six participants consented to undergo evaluation of their masticatory efficiency and recording of their muscular activity, while they wore an RPD with a unified bilateral design, during mastication of different types of test foods. The width of the artificial teeth was changed as follows. Initially (A), the length was adjusted so that the distal end of the mandibular second molars occluded with the distal end of the maxillary second molar (buccolingual width of 7-8 mm). Next (B), the width was decreased to half the maxillary second molars (buccolingual width of only 5 mm). A statistical analysis was performed using SAS software. One-way analysis of variance (ANOVA) was performed followed by Duncan's multiple range tests.

RESULTS

At the 2-month follow-up visit, wider teeth demonstrated greater masticatory efficiency than narrower teeth. However, after 4 months, no significant differences were observed between the two tooth widths. No significant differences in muscular activity were observed.

CONCLUSION

A reduction of the occlusal table width in free-end saddle RPDs resulted in decreased masticatory efficiency 2 months after denture fabrication, but there was no significant difference in muscular activity between narrow and wide teeth. However, after 4 months, the masticatory efficiency of the participants with narrower teeth improved without any changes in muscular activity.

A Collapsible Partial Denture for a Patient with Limited Mouth Opening Induced by Scleroderma: A Clinical Report

A limited opening of the mouth is defined as microstomia. Microstomia is caused by burns, postoperative head and neck trauma, radiotherapy, or scleroderma. The prosthetic treatment of microstomia presents particular challenges, and patients often complain of an inability to insert or remove the prosthesis. The cause and severity of microstomia can influence the approach to treatment. Different treatment methods have been suggested, including the fabrication of two-piece partial dentures. This clinical report describes the construction of a sectional impression tray and a collapsed partial denture using a hinge attachment for a patient with microstomia.