Characterization of the minimal origin required for replication of the streptococcal plasmid pIP501 in Bacillus subtilis

A comprehensive study of the interactions in the B. subtilis degradosome with special emphasis on the role of the small proteins SR1P and SR7P

Here, we employ coelution experiments and far-western blotting to identify stable interactions between the main components of the B. subtilis degradosome and the small proteins SR1P and SR7P. Our data indicate that B. subtilis has a degradosome comprising at least RNases Y and PnpA, enolase, phosphofructokinase, glycerol-3-phosphate dehydrogenase GapA, and helicase CshA that can be co-purified without cross-linking. All interactions were corroborated by far-western blotting with proteins purified from E. coli. Previously, we discovered that stress-induced SR7P binds enolase to enhance its interaction with and activity of enolase-bound RNase Y (RnY), while SR1P transcribed under gluconeogenic conditions interacts with GapA to stimulate its interaction with and the activity of RnjA (RnjA). We show that SR1P can directly bind RnjA, RnY, and PnpA independently of GapA, whereas SR7P only interacts with enolase. Northern blotting suggests that the degradation of individual RNAs in B. subtilis under gluconeogenic or stress conditions depends on either RnjA or RnY alone or on RnjA-SR1P, RnY-SR1P, or RnY-Eno. In vitro degradation assays with RnY or RnjA substrates corroborate the in vivo role of SR1P. Currently, it is unknown which substrate property is decisive for the utilization of one of the complexes.

A new role for SR1 from Bacillus subtilis: regulation of sporulation by inhibition of kinA translation

SR1 is a dual-function sRNA from Bacillus subtilis. It inhibits translation initiation of ahrC mRNA encoding the transcription activator of the arginine catabolic operons. Base-pairing is promoted by the RNA chaperone CsrA, which induces a slight structural change in the ahrC mRNA to facilitate SR1 binding. Additionally, SR1 encodes the small protein SR1P that interacts with glyceraldehyde-3P dehydrogenase A to promote binding to RNase J1 and enhancing J1 activity. Here, we describe a new target of SR1, kinA mRNA encoding the major histidine kinase of the sporulation phosphorelay. SR1 and kinA mRNA share 7 complementary regions. Base-pairing between SR1 and kinA mRNA decreases kinA translation without affecting kinA mRNA stability and represses transcription of the KinA/Spo0A downstream targets spoIIE, spoIIGA and cotA. The initial interaction between SR1 and kinA mRNA occurs 10 nt downstream of the kinA start codon and is decisive for inhibition. The sr1 encoded peptide SR1P is dispensable for kinA regulation. Deletion of sr1 accelerates sporulation resulting in low quality spores with reduced stress resistance and altered coat protein composition which can be compensated by sr1 overexpression. Neither CsrA nor Hfq influence sporulation or spore properties.

SR7 - a dual-function antisense RNA from Bacillus subtilis

Here, we describe SR7, a dual-function antisense RNA encoded on the Bacillus subtilis chromosome. This RNA was earlier described as SigB-dependent regulatory RNA S1136 and reported to reduce the amount of the small ribosomal subunit under ethanol stress. We found that the 5ʹ portion of SR7 encodes a small protein composed of 39 amino acids which we designated SR7P. It is translated from a 185 nt SigB-dependent mRNA under five different stress conditions and a longer SigB-independent RNA constitutively. About three-fold higher amounts of SR7P were detected in B. subtilis cells exposed to salt, ethanol, acid or heat stress. Co-elution experiments with SR7P_C-FLAG and Far-Western blotting demonstrated that SR7P interacts with the glycolytic enzyme enolase. Enolase is a scaffolding component of the B. subtilis degradosome where it interacts with RNase Y and phosphofructokinase PfkA. We found that SR7P increases the amount of RNase Y bound to enolase without affecting PfkA. RNA does not bridge the SR7P-enolase-RNase Y interaction. In vitro-degradation assays with the known RNase Y substrates yitJ and rpsO mRNA revealed enhanced enzymatic activity of enolase-bound RNase Y in the presence of SR7P. Northern blots showed a major effect of enolase and a minor effect of SR7P on the half-life of rpsO mRNA indicating a fine-tuning role of SR7P in RNA degradation.

Bacillus subtilis Type I antitoxin SR6 Promotes Degradation of Toxin yonT mRNA and Is Required to Prevent Toxic yoyJ Overexpression

yonT/SR6 is the second type I toxin-antitoxin (TA) system encoded on prophage SPβ in the B. subtilis chromosome. The yonT ORF specifying a 58 aa toxin is transcribed on a polycistronic mRNA under control of the yonT promoter. The antitoxin SR6 is a 100 nt antisense RNA that overlaps yonT at its 3′ end and the downstream gene yoyJ encoding a second, much weaker, toxin at its 5′ end. SR6 displays a half-life of >60 min, whereas yonT mRNA is less stable with a half-life of ≈8 min. SR6 is in significant excess over yonT mRNA except in minimal medium with glucose. It interacts with the 3′ UTR of yonT mRNA, thereby promoting its degradation by RNase III. By contrast, SR6 does not affect the amount or half-life of yoyJ mRNA. However, in its absence, a yoyJ overexpression plasmid could not be established in Bacillus subtilis suggesting that SR6 inhibits yoyJ translation by directly binding to its ribosome-binding site. While the amounts of both yonT RNA and SR6 were affected by vancomycin, manganese, heat-shock and ethanol stress as well as iron limitation, oxygen stress decreased only the amount of SR6.

Replication of Staphylococcal Resistance Plasmids

The currently widespread and increasing prevalence of resistant bacterial pathogens is a significant medical problem. In clinical strains of staphylococci, the genetic determinants that confer resistance to antimicrobial agents are often located on mobile elements, such as plasmids. Many of these resistance plasmids are capable of horizontal transmission to other bacteria in their surroundings, allowing extraordinarily rapid adaptation of bacterial populations. Once the resistance plasmids have been spread, they are often perpetually maintained in the new host, even in the absence of selective pressure. Plasmid persistence is accomplished by plasmid-encoded genetic systems that ensure efficient replication and segregational stability during cell division. Staphylococcal plasmids utilize proteins of evolutionarily diverse families to initiate replication from the plasmid origin of replication. Several distinctive plasmid copy number control mechanisms have been studied in detail and these appear conserved within plasmid classes. The initiators utilize various strategies and serve a multifunctional role in (i) recognition and processing of the cognate replication origin to an initiation active form and (ii) recruitment of host-encoded replication proteins that facilitate replisome assembly. Understanding the detailed molecular mechanisms that underpin plasmid replication may lead to novel approaches that could be used to reverse or slow the development of resistance.

DNA-Binding Proteins Regulating pIP501 Transfer and Replication

pIP501 is a Gram-positive broad-host-range model plasmid intensively used for studying plasmid replication and conjugative transfer. It is a multiple antibiotic resistance plasmid frequently detected in clinical Enterococcus faecalis and Enterococcus faecium strains. Replication of pIP501 proceeds unidirectionally by a theta mechanism. The minimal replicon of pIP501 is composed of the repR gene encoding the essential rate-limiting replication initiator protein RepR and the origin of replication, oriR, located downstream of repR. RepR is similar to RepE of related streptococcal plasmid pAMβ1, which has been shown to possess RNase activity cleaving free RNA molecules in close proximity of the initiation site of DNA synthesis. Replication of pIP501 is controlled by the concerted action of a small protein, CopR, and an antisense RNA, RNAIII. CopR has a dual function: It acts as transcriptional repressor at the repR promoter and, in addition, prevents convergent transcription of RNAIII and repR mRNA (RNAII), which indirectly increases RNAIII synthesis. CopR binds asymmetrically as a dimer at two consecutive binding sites upstream of and overlapping with the repR promoter. RNAIII induces transcriptional attenuation within the leader region of the repR mRNA (RNAII). Deletion of either control component causes a 10- to 20-fold increase of plasmid copy number, while simultaneous deletions have no additional effect. Conjugative transfer of pIP501 depends on a type IV secretion system (T4SS) encoded in a single operon. Its transfer host-range is considerably broad, as it has been transferred to virtually all Gram-positive bacteria including Streptomyces and even the Gram-negative Escherichia coli. Expression of the 15 genes encoding the T4SS is tightly controlled by binding of the relaxase TraA, the transfer initiator protein, to the operon promoter overlapping with the origin of transfer (oriT). The T4SS operon encodes the DNA-binding proteins TraJ (VirD4-like coupling protein) and the VirB4-like ATPase, TraE. Both proteins are actively involved in conjugative DNA transport. Moreover, the operon encodes TraN, a small cytoplasmic protein, whose specific binding to a sequence upstream of the oriT nic-site was demonstrated. TraN seems to be an effective repressor of pIP501 transfer, as conjugative transfer rates were significantly increased in an E. faecalis pIP501ΔtraN mutant.

Plasmid Replication Control by Antisense RNAs

Plasmids are selfish genetic elements that normally constitute a burden for the bacterial host cell. This burden is expected to favor plasmid loss. Therefore, plasmids have evolved mechanisms to control their replication and ensure their stable maintenance. Replication control can be either mediated by iterons or by antisense RNAs. Antisense RNAs work through a negative control circuit. They are constitutively synthesized and metabolically unstable. They act both as a measuring device and a regulator, and regulation occurs by inhibition. Increased plasmid copy numbers lead to increasing antisense-RNA concentrations, which, in turn, result in the inhibition of a function essential for replication. On the other hand, decreased plasmid copy numbers entail decreasing concentrations of the inhibiting antisense RNA, thereby increasing the replication frequency. Inhibition is achieved by a variety of mechanisms, which are discussed in detail. The most trivial case is the inhibition of translation of an essential replication initiator protein (Rep) by blockage of the rep-ribosome binding site. Alternatively, ribosome binding to a leader peptide mRNA whose translation is required for efficient Rep translation can be prevented by antisense-RNA binding. In 2004, translational attenuation was discovered. Antisense-RNA-mediated transcriptional attenuation is another mechanism that has, so far, only been detected in plasmids of Gram-positive bacteria. ColE1, a plasmid that does not need a plasmid-encoded replication initiator protein, uses the inhibition of primer formation. In other cases, antisense RNAs inhibit the formation of an activator pseudoknot that is required for efficient Rep translation.

The Interplay between Different Stability Systems Contributes to Faithful Segregation: Streptococcus pyogenes pSM19035 as a Model

The Streptococcus pyogenes pSM19035 low-copy-number θ-replicating plasmid encodes five segregation (seg) loci that contribute to plasmid maintenance. These loci map outside of the minimal replicon. The segA locus comprises β2 recombinase and two six sites, and segC includes segA and also the γ topoisomerase and two ssiA sites. Recombinase β2 plays a role both in maximizing random segregation by resolving plasmid dimers (segA) and in catalyzing inversion between two inversely oriented six sites. segA, in concert with segC, facilitates replication fork pausing at ssiA sites and overcomes the accumulation of "toxic" replication intermediates. The segB1 locus encodes ω, ε, and ζ genes. The short-lived ε2 antitoxin and the long-lived ζ toxin form an inactive ζε2ζ complex. Free ζ toxin halts cell proliferation upon decay of the ε2 antitoxin and enhances survival. If ε2 expression is not recovered, by loss of the plasmid, the toxin raises lethality. The segB2 locus comprises δ and ω genes and six parS sites. Proteins δ2 and ω2, by forming complexes with parS and chromosomal DNA, pair the plasmid copies at the nucleoid, leading to the formation of a dynamic δ2 gradient that separates the plasmids to ensure roughly equal distribution to daughter cells at cell division. The segD locus, which comprises ω2 (or ω2 plus ω22) and parS sites, coordinates expression of genes that control copy number, better-than-random segregation, faithful partition, and antibiotic resistance. The interplay of the seg loci and with the rep locus facilitates almost absolute plasmid stability.

Antisense-RNA mediated control of plasmid replication - pIP501 revisited

Over the past decade, a wealth of small noncoding RNAs (sRNAs) have been discovered in the genomes of almost all bacterial species, where they constitute the most abundant class of posttranscriptional regulators. These sRNAs are key-players in prokaryotic metabolism, stress response and virulence. However, the first bona-fide antisense RNAs had been found already in 1981 in plasmids, where they regulate replication or maintenance. Antisense RNAs involved in plasmid replication control - meanwhile investigated in depth for almost 35 years - employ a variety of mechanisms of action: They regulate primer maturation, inhibit translation of essential replication initiator proteins (Rep proteins) as well as leader peptides or the formation of activator pseudoknots required for efficient rep translation. Alternatively they attenuate transcription or translation of rep mRNAs. Some antisense RNAs collaborate with transcriptional repressors to ensure proper copy-number control. Here, I summarize our knowledge on replication control of the broad-host range plasmid pIP501 that was originally isolated from Streptococcus agalactiae. Plasmid pIP501 uses two copy number-control elements, RNAIII, a cis-encoded antisense RNA, and transcriptional repressor CopR. RNA III mediates transcription attenuation, a rather widespread concept that found its culmination in the recent discovery of riboswitches. A peculiarity of pIP501 is the unusual stability of RNA III, which requires a second function of CopR: CopR does not only repress transcription from the essential repR promoter, but also prevents convergent transcription between rep mRNA and RNAIII, thereby indirectly increasing the amount of RNAIII. The concerted action of these two control elements is necessary to prevent plasmid loss at dangerously low copy numbers.

Plasmid pSM19035, a model to study stable maintenance in Firmicutes

pSM19035 is a low-copy-number theta-replicating plasmid, which belongs to the Inc18 family. Plasmids of this family, which show a modular organization, are functional in evolutionarily diverse bacterial species of the Firmicutes Phylum. This review summarizes our understanding, accumulated during the last 20 years, on the genetics, biochemistry, cytology and physiology of the five pSM19035 segregation (seg) loci, which map outside of the minimal replicon. The segA locus plays a role both in maximizing plasmid random segregation, and in avoiding replication fork collapses in those plasmids with long inverted repeated regions. The segB1 locus, which acts as the ultimate determinant of plasmid maintenance, encodes a short-lived epsilon(2) antitoxin protein and a long-lived zeta toxin protein, which form a complex that neutralizes zeta toxicity. The cells that do not receive a copy of the plasmid halt their proliferation upon decay of the epsilon(2) antitoxin. The segB2 locus, which encodes two trans-acting, ParA- and ParB-like proteins and six cis-acting parS centromeres, actively ensures equal or roughly equal distribution of plasmid copies to daughter cells. The segC locus includes functions that promote the shift from the use of DNA polymerase I to the replicase (PolC-PolE DNA polymerases). The segD locus, which encodes a trans-acting transcriptional repressor, omega(2), and six cis-acting cognate sites, coordinates the expression of genes that control copy number, better-than-random segregation and partition, and assures the proper balance of these different functions. Working in concert the five different loci achieve almost absolute plasmid maintenance with a minimal growth penalty.

A Bacillus anthracis-based in vitro system supports replication of plasmid pXO2 as well as rolling-circle-replicating plasmids

Capsule-encoding virulence plasmid pXO2 of Bacillus anthracis is predicted to replicate by a unidirectional theta-type mechanism. To gain a better understanding of the mechanism of replication of pXO2 and other plasmids in B. anthracis and related organisms, we have developed a cell-free system based on B. anthracis that can faithfully replicate plasmid DNA in vitro. The newly developed system was shown to support the in vitro replication of plasmid pT181, which replicates by the rolling-circle mechanism. We also demonstrate that this system supports the replication of plasmid pXO2 of B. anthracis. Replication of pXO2 required directional transcription through the plasmid origin of replication, and increased transcription through the origin resulted in an increase in plasmid replication.

Construction of plasmid vectors for screening replicons from gram-positive bacteria and their use as shuttle cloning vectors

Plasmids play a central role in engineering recombinant bacteria because they are the primary vehicles used to manipulate targeted sequences. In some cases, bacteria of interest are poorly provided with suitable tools for these molecular or genetic manipulations. In this context, we constructed from two shuttle cloning vectors, pUCB2871 and pUCB2872, the basic vectors pUCB30 and pUCB31, which could represent suitable tools to isolate replicons from Gram-positive bacteria. These plasmid vectors are characterized by the following after-features: (a) the pUC origin of replication is unable to replicate in Gram-positive bacteria; (b) an erythromycin-resistance encoding gene that is functional in both Gram-negative and -positive bacteria; (c) the pUC19 multiple cloning site (MCS) within the lacZalpha reporter gene; and (4) an additional multiple cloning site (MCS). Cloning replicons from Gram-positive bacteria in this additional MCS would allow the derivative vectors to function directly as shuttle cloning vectors.

Construction of compatible wide-host-range shuttle vectors for lactic acid bacteria and Escherichia coli

A new collection of shuttle cloning vectors has been constructed that can be used in a broad host range, because they carry replication origins which are functional in Escherichia coli (p15A, pWV01, ColE1), Lactococcus lactis, lactobacilli, and Bacillus subtilis (pAMbeta1, pWV01). These plasmids contain the lacZ-T1T2 cassette from pJDC9, which allows the X-gal selection and cloning of DNA fragments that could cause plasmid instability in E. coli. In addition, they have been proved to be structurally and segregationally stable in Lactobacillus casei, in which their copy number has been determined by real-time quantitative PCR. Furthermore, the antibiotic resistance markers (beta-lactamase, chloramphenicol acetyl transferase, and erythromycin transacetylase) and the theta and rolling circle replicating origins have been combined to obtain this set of compatible plasmids (pIA family) that can be cotransformed, both in lactic acid bacteria and in E. coli.

Analysis of the replicon region and identification of an rRNA operon on pBM400 of Bacillus megaterium QM B1551

An 18 633 bp region containing the replicon from the approximately 53 kb pBM400 plasmid of Bacillus megaterium QM B1551 has been sequenced and characterized. This region contained a complete rRNA operon plus 10 other potential open reading frames (ORFs). The replicon consisted of an upstream promoter and three contiguous genes (repM400, orfB and orfC) that could encode putative proteins of 428, 251 and 289 amino acids respectively. A 1.6 kb minimal replicon was defined and contained most of repM400. OrfB was shown to be required for stability. Three 12 bp identical tandem repeats were located within the coding region of repM400, and their presence on another plasmid caused incompatibility with their own cognate replicon. Nonsense, frameshift and deletion mutations in repM400 prevented replication, but each mutation could be complemented in trans. RepM400 had no significant similarity to sequences in the GenBank database, whereas five other ORFs had some similarity to gene products from other plasmids and the Bacillus genome. An rRNA operon was located upstream of the replication region and is the first rRNA operon to be sequenced from B. megaterium. Its unusual location on non-essential plasmid DNA has implications for systematics and evolutionary biology.

Replication mechanism and sequence analysis of the replicon of pAW63, a conjugative plasmid from Bacillus thuringiensis

A 5.8-kb fragment of the large conjugative plasmid pAW63 from Bacillus thuringiensis subsp. kurstaki HD73 containing all the information for autonomous replication was cloned and sequenced. By deletion analysis, the pAW63 replicon was reduced to a 4.1-kb fragment harboring four open reading frames (ORFs). Rep63A (513 amino acids [aa]), encoded by the largest ORF, displayed strong similarity (40% identity) to the replication proteins from plasmids pAMbeta1, pIP501, and pSM19035, indicating that the pAW63 replicon belongs to the pAMbeta1 family of gram-positive theta-replicating plasmids. This was confirmed by the facts that no single-stranded DNA replication intermediates could be detected and that replication was found to be dependent on host-gene-encoded DNA polymerase I. An 85-bp region downstream of Rep63A was also shown to have strong similarity to the origins of replication of pAMbeta1 and pIP501, and it is suggested that this region contains the bona fide pAW63 ori. The protein encoded by the second large ORF, Rep63B (308 aa), was shown to display similarity to RepB (34% identity over 281 aa) and PrgP (32% identity over 310 aa), involved in copy control of the Enterococcus faecalis plasmids pAD1 and pCF10, respectively. No significant similarity to known proteins or DNA sequences could be detected for the two smallest ORFs. However, the location, size, hydrophilicity, and orientation of ORF6 (107 codons) were analogous to those features of the putative genes repC and prgO, which encode stability functions on plasmids pAD1 and pCF10, respectively. The cloned replicon of plasmid pAW63 was stably maintained in Bacillus subtilis and B. thuringiensis and displayed incompatibility with the native pAW63. Hybridization experiments using the cloned replicon as a probe showed that pAW63 has similarity to large plasmids from other B. thuringiensis subsp. kurstaki strains and to a strain of B. thuringiensis subsp. alesti.

Transcription-driven DNA replication of plasmid pAMbeta1 in Bacillus subtilis

pAMbeta1 is a plasmid isolated from Enterococcus faecalis which replicates in Bacillus subtilis by a unidirectional theta mechanism. It has been shown previously that initiation of pAMbeta1 replication requires a plasmid-encoded protein (RepE) and a short origin and is carried out by the host DNA polymerase I. It is not known which primer is used by this polymerase for initiating replication. Here, we report that a transcription fork passing through the origin is a limiting factor for plasmid replication. Transcription that activates the origin is initiated at the repE promoter and is thus regulated by the plasmid copy-number control system. Two lines of evidence suggest that the transcription generates the primer for the DNA polymerase I. First, the transcription must start upstream from the origin and progress in the direction of replication to be effective. Second, 3' ends of RNA transcripts initiated upstream of the origin map within the origin, provided that the Rep protein and an intact origin are present. This is the first report for simultaneous requirement of a transcription fork, a replication protein and the DNA polymerase I in initiation of DNA replication.

Inhibition of a naturally occurring rolling-circle replicon in derivatives of the theta-replicating plasmid pIP501

The mechanisms ensuring regulation of DNA replication in genomes containing multiple replicons are poorly understood. In this report, we addressed this question by analysing in Bacillus subtilis the replication of a derivative of the promiscuous plasmid pIP501 that carries a rolling-circle and a theta replicon. Genetic analyses revealed that the rolling-circle replicon is strongly inhibited in the derivative and that inhibition requires three elements involved in theta replication: the replication origin, the initiator RepR protein and strong transcription of the repR gene. Inhibition is, however, independent of DNA synthesis at the theta origin. We conclude that rolling-circle inhibition is caused by an inhibitory signal encoded by the theta replicon and propose that the signal is composed, at least, of the RepR protein bound to its cognate origin.

Plasmids in Lactobacillus

This review describes Lactobacillus plasmids on distribution, structure, function, vector construction, vector stability, application, and prospective. About 38% of species of the genus Lactobacillus were found to contain plasmids with different sizes (from 1.2 to 150 kb) and varied numbers (1 or more). Some Lactobacillus plasmids with small sizes were highly similar to those of single strand plasmids from other Gram-positive bacteria. The extensive sequence homologies of plus origins, replication initiation proteins, minus origins, cointegration sites, and the presence of single strand intermediates supported the fact that these small Lactobacillus plasmids replicate with a rolling-circle replication mechanism. Some Lactobacillus plasmid replicons were of broad host range that could function in other Gram-positive bacteria, and even in Escherichia coli, while replicons of other Gram-positive bacteria also function in Lactobacillus. Although most Lactobacillus plasmids are cryptic, some plasmid-encoded functions have been discovered and applied to vector construction and Lactobacillus identification, detection, and modification.

Countertranscript-driven attenuation system of the pAM beta 1 repE gene

The plasmid-encoded RepE protein is absolutely essential and rate-limiting for replication of the promiscuous plasmid pAM beta 1 originating from Enterococcus faecalis. We previously showed that the rep gene is transcribed from a promoter that is negatively regulated (approximately 10-fold reduction) by the CopF repressor. In this report, we show that this transcription is decreased a further approximately 10-times by a countertranscript-driven transcriptional attenuation system. Extensive mutagenesis revealed that this system operates by a mechanism similar to that previously described for the unrelated repC gene of plasmid pT181.

Characterization of the replication region of the Bacillus subtilis plasmid pLS20: a novel type of replicon

A 3.1 kb fragment of the large (approximately 55 kb) Bacillus subtilis plasmid pLS20 containing all the information for autonomous replication was cloned and sequenced. In contrast to the parental plasmid, derived minireplicons were unstably maintained. Using deletion analysis the fragment essential and sufficient for replication was delineated to 1.1 kb. This 1.1 kb fragment is located between two divergently transcribed genes, denoted orfA and orfB, neither of which is required for replication. orfA shows homology to the B.subtilis chromosomal genes rapA (spoOL, gsiA) and rapB (spoOP). The 1.1 kb fragment, which is characterized by the presence of several regions of dyad symmetry, contains no open reading frames of more than 85 codons and shows no similarity with other known plasmid replicons. The structural organization of the pLS20 minimal replicon is entirely different from that of typical rolling circle plasmids from Gram-positive bacteria. The pLS20 minireplicons replicate in polA5 and recA4 B.subtilis strains. Taken together, these results strongly suggest that pLS20 belongs to a new class of theta replicons.

Deletion analysis of minimal sequence requirements for autonomous replication of ors8, a monkey early-replicating DNA sequence

We have generated a panel of deletion mutants of ors8 (483 bp), a mammalian autonomously replicating DNA sequence, previously isolated by extrusion of nascent monkey (CV-1) DNA from replication bubbles active at the onset of S phase. The deletion mutants were tested for replication function by the DpnI resistance assay, in vivo, after transfection into HeLa cells, and in vitro. An internal fragment of 186-bp that is required for autonomous replication function of ors8 was identified. This fragment, when subcloned into pBR322 and similarly tested, was capable of autonomous replication in vivo and in vitro. The 186-bp fragment contains several repeated sequence motifs, such as the ATTA and ATTTAT motifs, occurring three and five times, respectively, the sequences TAGG and TAGA, occurring three and seven times, respectively, two 5'-ATT-3' repeats, a 44-bp imperfect inverted repeat (IR) sequence, and an imperfect consensus binding element for the transcription factor Oct-1. A measurable sequence-directed DNA curvature was also detected, coinciding with the AT-rich regions of the 186-bp fragment.

The copR gene product of plasmid pIP501 acts as a transcriptional repressor at the essential repR promoter

The amount of the rate-limiting replication initiator protein RepR of plasmid pIP501 is negatively controlled by an antisense RNA (RNAIII) and a dispensable protein (CopR). Deletions or mutations in either component cause a 10-20-fold copy number increase. RNAIII induces transcription attenuation of the repR mRNA; the mode of CopR action remained unclear. To test the function of CopR, transcriptional fusions of promoters pI, pII and pIII with lacZ were integrated into the Bacillus subtilis chromosome. CopR and/or RepR were supplied in trans, and LacZ synthesis measured. The results show that CopR represses the repR promoter pII. Neither CopR nor RepR autoregulate their promoters. Gel mobility shift assays indicate that CopR binds to a 44 bp DNA fragment comprising the inverted repeat upstream of pII.

The pAM beta 1 CopF repressor regulates plasmid copy number by controlling transcription of the repE gene

pAM beta 1 is a low-copy-number, promiscuous plasmid from Gram-positive bacteria that replicates by a unidirectional theta-type mode. Its replication is initiated by an original mechanism, involving the positive rate-limiting RepE protein. Here we show that the pAM beta 1-encoded CopF protein is involved in negative regulation of the plasmid copy number. CopF represses approximately 10-fold the transcription initiated at the promoter of the repE gene and binds to a 31 bp segment which is located immediately upstream of the -35 box of the repE promoter. We propose that CopF inhibits initiation of transcription at the repE promoter by binding to its operator.

A fourth class of theta-replicating plasmids: the pAM beta 1 family from gram-positive bacteria

Plasmid pAM beta 1 from Enterococcus faecalis uses a unidirectional theta mode of replication. We show here that this replication (i) is dependent on a plasmid-encoded replication protein (Rep) but not on a DNA structure typical for origins of most Rep-dependent plasmids and (ii) is initiated by DNA polymerase I (PolI). pAM beta 1 minimal replicon shares no homology with highly conserved ColE1-type replicons, which use PolI for initiation but do not encode a Rep, or with ColE2 and ColE3 replicons, which require PolI for replication and encode a Rep. We propose that pAM beta 1 and a number of other naturally occurring and closely related plasmids from a distinct plasmid class.

RepR protein expression on plasmid pIP501 is controlled by an antisense RNA-mediated transcription attenuation mechanism

Expression of the rate-limiting initiator protein RepR of plasmid pIP501 is controlled by the antisense RNAIII. Mutational alteration of individual G residues within the single-stranded loops of RNAIII led to an increase in copy number. In contrast to the G-rich single-stranded loops, two smaller AT-rich loops of RNAIII were found to be dispensable for its inhibitory function. Reciprocal mutations in the same loop compensated for each other's effect, and a destabilization of the major stem structure of RNAIII also resulted in an increased copy number. These data were consistent with the idea that the interaction of RNAIII with its target starts with the formation of a kissing complex between the single-stranded loops of both molecules. The repR mRNA leader sequence, which includes the target of RNAIII, is able to assume two alternative structures due to the presence of two inverted repeats the individual sequences of which are mutually complementary. In the presence of the antisense RNAIII, one of these inverted repeats (IR2) is forced to fold into a transcriptional terminator structure that prevents transcription of the repR gene. In the absence of RNAIII, formation of the transcriptional terminator is prevented and expression of the essential repR gene can proceed normally. This antisense RNA-driven transcriptional attenuation mechanism was supported by extensive deletional analysis and direct evidence that IR2 functions as a transcriptional terminator.