Conformation of a cyclic decapeptide analog of a repeat pentapeptide sequence of elastin: cyclo-bis(valyl-prolyl-alanyl-valyl-glycyl)

Enhancement of Self-Aggregation Properties of Linear Elastin-Derived Short Peptides by Simple Cyclization: Strong Self-Aggregation Properties of Cyclo[FPGVG] n, Consisting Only of Natural Amino Acids

Elastin-like peptides (ELPs) consist of distinctive repetitive sequences, such as (VPGVG) _n, exhibit temperature-dependent reversible self-assembly (coacervation), and have been considered to be useful for the development of thermoresponsive materials. Further fundamental studies evaluating coacervative properties of novel nonlinear ELPs could present design concepts for new thermoresponsive materials. In this study, we prepared novel ELPs, cyclic (FPGVG) _n (cyclo[FPGVG] _n, n = 1-5), and analyzed their self-assembly properties and structural characteristics. Cyclo[FPGVG] _n ( n = 3-5) demonstrated stronger coacervation capacity than the corresponding linear peptides. The coacervate of cyclo[FPGVG]₅ was able to retain water-soluble dye molecules at 40 °C, which implied that cyclo[FPGVG]₅ could be employed as a base material of DDS (drug delivery system) matrices and other biomaterials. The results of molecular dynamics simulations and circular dichroism measurements suggested that a certain chain length was required for cyclo[FPGVG] _n to demonstrate alterations in molecular structure that were critical to the exhibition of coacervation.

Structure and dynamics of two elastin-like polypentapeptides studied by NMR spectroscopy

The structure and dynamics of two synthetic elastin-like polypentapeptides, poly(G(1)V(1)G(2)V(2)P) and poly(AV(1)GV(2)P), were studied in D(2)O and H(2)O at various temperatures by using (1)H, (2)H,(13)C, and (15)N NMR spectra, relaxations, and PGSE self-diffusivity measurement. Signal assignments were made using COSY, NOESY, HXCORR, HSQC, HMBC, and SSLR INEPT techniques. Temperature-induced conformation changes were studied using (3)J(NHCH) couplings, NOESY connectivity, chemical shifts, and signal intensities. Hydrodynamic radii were derived from self-diffusion coefficients measured by the pulsed-gradient spin-echo (PGSE) method. Selective hydration (hydrophilic or hydrophobic) was explored using NOESY and ROESY spectral methods and longitudinal and transverse (1)H relaxation of HOD and quadrupolar (2)H relaxation of D(2)O. Four different physical states were discerned in different temperature regions for both polymers: state I of a rather extended, statistically shaped and fully hydrated polymer below the critical temperature (approximately 299-300 K); state II, a relatively coiled and globular but disordered preaggregation state, developing in a rather narrow region, 300-303 K, in the case of poly(AV(1)GV(2)P) and in a broader region, overlapping with the next one, in poly(G(1)V(1)G(2)V(2)P); state III, a tightly coiled, more compact state in the region 303-313 K; and, finally, state IV, an aggregated (and eventually flocculating and sedimenting) state beyond 313 K. States II-IV coexist in varying proportions in the whole temperature range above 299 K. A structure characterized by a beta-turn stabilized by H-bonding between the Ala carbonyl and Val(2) NH groups of poly(AV(1)GV(2)P) was detected by NOESY just above the transition temperature. States II and III are progressively more stripped of their hydration sheath but retain some molecules of water confined and relatively immobilized in their coils.

Role of chimeric murine leukemia virus env beta-turn polyproline spacers in receptor cooperation

We have previously reported a set of Moloney murine leukemia virus derived envelopes retargeted to the Pit-2 phosphate transporter molecule, by insertion of the Pit-2 binding domain (BD) at the N terminus of the ecotropic retroviral envelope glycoproteins (S. Valsesia-Wittmann et al., J. Virol. 70:2059-2064, 1996). The resulting chimeric envelopes share two BDs: an additional N-terminal BD (Pit-2 BD) and the BD of the ecotropic envelope (mCAT-1 BD). By inserting a variety of different amino acid spacers between the two binding domains, we showed that retroviruses can potentially use the targeted cell surface receptor Pit-2, the ecotropic retroviral receptor mCAT-1, or both receptors cooperatively for entry into target cell (S. Valsesia-Wittmann et al., EMBO J 6:1214-1223, 1997). An extreme example of receptor cooperativity was encountered when envelopes with specific proline-rich interdomain spacers (PRO spacers) were tested: both receptors had to be coexpressed at the surface of the targeted cells to cooperatively allow infection. Here, we characterized the role of PRO spacer in the cooperation of receptors. We have shown that the particular organization of the PRO spacer-a beta-turn polyproline-was responsible for the cooperative effect. In the native configuration of the viruses, the structure masked the regions located downstream of the PRO spacer, thus the mCAT-1 BD. After interaction with the targeted Pit-2 receptor, the BD of the backbone envelope became accessible, and we demonstrated that interaction between the mCAT-1 BD and the mCAT-1 receptor is absolutely necessary. This interaction leads to natural fusion triggering and entry of viruses into targeted cells.

Solution and solid state structure of an aib-containing cyclodecapeptide inhibiting the cholate uptake in hepatocytes

The conformational analysis of synthetic cyclodecapeptide c(Pro-Phe-phe-Aib-Leu)2 related to the cyclolinopeptide A, in the solid state and solution, has been carried out by x-ray diffraction and nmr spectroscopy. The structure of the monoclinic form obtained from methanol [a = 11.351 (5) A, b = 27.455 (2) A, c = 12.716 (8) A, beta = 99.65 (3) degrees; space group P2(1); Z = 2] shows the presence of six intramolecular NH...CO hydrogen bonds, with formation of four turns (three of type I and one of type III) and two C16 ring structures. All peptide units are trans. The solution structure, as found by nmr, indicates that, at room temperature, the peptide is conformationally homogeneous; the structure determined is perfectly symmetrical and topologically similar to that found in the solid state. The cyclodecapeptide exhibits similar biological activity to cyclolinopeptide A.

Bicyclic peptides as models of calcium binding sites: synthesis and conformation of a homodetic undecapeptide

A bicyclic undecapeptide of sequence cyclo-(Ala(1)-Pro(2)-Asp(3)-Glu(4)-Lys(5)-Ala(6)-Pro(7)-Asp(8)-Ser(9) -Glu(10))-cyclo-(10gamma --> 5varepsilon)-Gly(11), designed to mimic the calcium coordination site I of Calmodulin, has been synthesized and its conformation and calcium binding properties have been investigated by means of CD and nmr spectroscopy. The nmr analysis of the free peptide, carried out in DMSO and in TFE/H(2)O at different pH values, shows the presence in solution of one stable conformer, exhibiting trans configuration around both Proline residues. The nmr results in both solvents suggest for the molecule a rectangular shape constituted by two antiparallel beta-strands connected by two beta-turns. Interproton distances, evaluated by NOE contacts, have been used to obtain feasible models by means of Restrained Molecular Dynamic (RMD). The average models from RMD calculations, for both solvents, exhibit good analogies with Calmodulin site I. The model system, when compared with the reference system (Asp(20)-Glu(31) segment in CaM), shows similar dimensions and an effective superimposition of the respective sequence segments Ala(1)-Glu(4) and Thr(28)-Glu(31). The remaining segments of the model peptide exhibit a bending that is intermediate between that of the free and Ca(2+)-coordinated site I. CD spectra, recorded in TFE solutions, point to a 1:1 stoichiometry for the Ca(2+)-peptide complex, with an association constant of at least 1 x 10(5) M(-1).

Short elastin-like peptides exhibit the same temperature-induced structural transitions as elastin polymers: implications for protein engineering

Elastin is a major protein component of the vascular wall and is responsible for its unusual elastic properties. Polymers of its repeating VPGVG sequences have been synthesised and shown to exhibit an inverse temperature transition where, as temperature rises, the polymer collapses from an extended chain to a beta-spiral structure with three VPGVG units per turn, each pentamer adopting a type II beta-turn conformation. These studies, however, have not established whether the temperature-driven conformational change is an intrinsic property of the individual pentameric sequences or a global, co-operative effect of many pentamers within the beta-spiral structure. Here, we examine by circular dichroism the behaviour of elastin-like peptides (VPGVG)n, where n varies between 1 and 5. Remarkably, we find that all lengths of peptide undergo an extended left and right arrow beta-turn transition with increasing temperature, suggesting that the induction of the beta-spiral occurs at the level of single pentameric units. The origin of this effect is a positive DeltaS term for the transition. At 35 degreesC, the average transition midpoint temperature, the value of TDeltaS is about 15 kcal mol-1. With larger oligomers (n=3), there is only a modest rise in DeltaS, suggesting that the dominant entropic effect resides within the monomer and that interactions between these units make only a small contribution to the energetics of the transition. Charges at the termini, and residue replacements or additions, regulate the transitions for the short peptides in a manner similar to that observed for the longer polymers. The behaviour of the same peptides in trifluoroethanol and SDS solutions is consistent with formation of the beta-turn being driven by interactions between non-polar groups. The significance of this behaviour for the rational design of temperature-induced responses in proteins is discussed.

Insect cuticular proteins

Insect cuticles are composite structural materials with mechanical properties optimal for their biological functions. The bulk properties of cuticles are to a large extent determined by the interactions between the various components, mainly the chitin filament system and the proteins. The various cuticular types show pronounced differences in mechanical properties, and it is suggested that these differences can be related to the properties of the individual proteins and to the degree of secondary stabilization (sclerotization). The amino acid sequences, which have been obtained for insect cuticular proteins either by direct sequencing of purified proteins or by deduction from corresponding DNA-sequences, are listed according to insect order and species. Extensive sequence similarity is observed among several cuticular proteins obtained from different insect orders. Other cuticular proteins are characterized by repeated occurrence of a few small motifs consisting mainly of hydrophobic residues. The latter group of proteins has so far only been reported from stiff cuticles. The possible relevance of the various motifs and repeats for protein interaction and the mechanical properties of cuticles is discussed.

Structure and self assembly of a retrovirus (FeLV) proline rich neutralization domain

The 60 amino acid proline-rich neutralization domain of the external surface unit glycoprotein of feline leukemia virus was chemically synthesized in total and in fragments. We examined the ability of these retroviral peptides to form ordered conformations using 1H-NMR, circular dichroism spectroscopy, and intrinsic viscosity measurements. One dimensional nuclear magnetic resonance spectroscopy revealed that the 60 amino acid peptide could form a stable, folded structure that was long-lived, as shown by the ability to protect amide-protons in D20. Peptides corresponding to the N-terminal 42, N-terminal 20 amino acids, and middle 20 amino acid sections could also form stable structures. The C-terminal segment did not protect any protons in D20. Interestingly, self assembly of the N-terminal 42 and C-terminal 16 amino acid peptides into a structure very close to that of the 60 amino acid domain was observed. The circular dichroism results reveals a large negative cotton effect at 198 nm that is characteristic of the proline-rich beta-turn helixes which consist predominantly of trans-proline. The intrinsic viscosity results suggest a non-random coil structure that is rod shaped. Our conclusion is that PRN60 forms a beta-turn helix and that this region of FeLV-gp70 is a separate folding domain of the retroviral surface unit glycoprotein. The unique conformational properties of PRN60 and its critical role as the predominant target for neutralizing antibody responses suggest that this peptide is a reasonable candidate for producing a synthetic peptide vaccine for FeLV.

Crystal structure and conformation of a highly constrained linear tetrapeptide Boc-Leu-dehydro Phe-Ala-Leu-OCH3

The conformation of a tetrapeptide containing a dehydro amino acid, delta ZPhe, in its sequence has been determined in the crystalline state using X-ray crystallographic techniques. The tetrapeptide, Boc-Leu-delta ZPhe-Ala-Leu-OCH3, crystallizes in the orthorhombic space group P2(1)2(1)2(1) with four molecules in a unit cell of dimensions a = 11.655(1) A, b = 15.698(6) A and c = 18.651(3) A V = 3414.9 A and Dcalc = 1.12 g/cm-3. The asymmetric unit contains one tetrapeptide molecule, C30H46N4O7, a total of 41 nonhydrogen atoms. The structure was determined using the direct methods program SHELXS86 and refined to an R-factor of 0.049 for 3347 reflections (I3.0(I). The linear tetrapeptide in the crystal exhibits a double bend of the Type III-I, with Leu1 (phi = -54.1 degrees, psi = -34.5 degrees) and delta ZPhe2 (phi = -59.9 degrees, psi = -17.1 degrees) as the corner residues of Type III turn and delta ZPhe2 (phi = -59.9 degrees, psi = -17.1 degrees) and Ala3 (phi = -80.4 degrees, psi = 0.5 degrees) residues occupying the corners of Type I turn, with delta ZPhe as the common residue in the double bend. The turn structures are further stabilized by two intramolecular 4----1 type hydrogen bonds.