Changes in the microstructure of the human aortic medial layer under biaxial loading investigated by multi-photon microscopy

Understanding the correlation between tissue architecture, health status, and mechanical properties is essential for improving material models and developing tissue engineering scaffolds. Since structural-based material models are state of the art, there is an urgent need for experimentally obtained structural parameters. For this purpose, the medial layer of nine human abdominal aortas was simultaneously subjected to equibiaxial loading and multi-photon microscopy. At each loading interval of 0.02, collagen and elastin fibers were imaged based on their second-harmonic generation signal and two-photon excited autofluorescence, respectively. The structural alterations in the fibers were quantified using the parameters of orientation, diameter, and waviness. The results of the mechanical tests divided the sample cohort into the ruptured and non-ruptured, and stiff and non-stiff groups, which were covered by the findings from histological investigations. The alterations in structural parameters provided an explanation for the observed mechanical behavior. In addition, the waviness parameters of both collagen and elastin fibers showed the potential to serve as indicators of tissue strength. The data provided address deficiencies in current material models and bridge multiscale mechanisms in the aortic media. STATEMENT OF SIGNIFICANCE: Available material models can reproduce, but cannot predict, the mechanical behavior of human aortas. This deficiency could be overcome with the help of experimentally validated structural parameters as provided in this study. Simultaneous multi-photon microscopy and biaxial extension testing revealed the microstructure of human aortic media at different stretch levels. Changes in the arrangement of collagen and elastin fibers were quantified using structural parameters such as orientation, diameter and waviness. For the first time, structural parameters of human aortic tissue under continuous loading conditions have been obtained. In particular, the waviness parameters at the reference configuration have been associated with tissue stiffness, brittleness, and the onset of atherosclerosis.

Structure and Function of Porcine Arteries Are Preserved for up to 6 Days Using the HypoRP Cold-storage Solution

BACKGROUND

Maintaining functional vessels during preservation of vascularized composite allografts (VCAs) remains a major challenge. The University of Wisconsin (UW) solution has demonstrated significant short-term benefits (4-6 h). Here we determined whether the new hypothermic resuscitation and preservation solution HypoRP improves both structure, survival, and function of pig arteries during storage for up to 6 days.

METHODS

Using porcine swine mesenteric arteries, the effects of up to 6-day incubation in a saline (PBS), UW, or HypoRP solution on the structure, cell viability, metabolism, and function were determined.

RESULTS

After incubation at 4°C, for up to 6 days, the structures of the arteries were significantly disrupted, especially the tunica media, following incubation in PBS, in contrast with incubation in the HypoRP solution and to a lesser extent, in UW solution. Those disruptions were associated with increased active caspase 3 indicative of apoptosis. Additionally, while incubation in PBS led to a significant decrease in the metabolic activity, UW and HypoRP solutions allowed a stable to increased metabolic activity following 6 days of cold storage. Functional responsiveness to phenylephrine (PE) and sodium nitroprusside (SNP) decreased over time for artery rings stored in PBS and UW solution but not for those stored in HypoRP solution. Moreover, artery rings cold-stored in HypoRP solution were more sensitive to ATP.

CONCLUSIONS

The HypoRP solution improved long-term cold storage of porcine arteries by limiting structural alterations, including the collagen matrix, reducing apoptosis, and maintaining artery contraction-relaxation functions for up to 6 days.

Comparison of Different Thawing Protocols in Human Cryopreserved Venous Grafts

BACKGROUND

The aim of our study was to assess the impact of different thawing protocols on morphological changes arising in cryopreserved human saphenous vein grafts.

METHODS

The study was performed in 12 saphenous vein grafts harvested in brain death donors. Storage in the vapor phase of liquid nitrogen for 3 or 5 years followed. Two thawing protocols were tested: slow thawing in a refrigerator at temperature +4°C for 2 hr and rapid thawing-in a water bath at +37°C. Grafts were processed for scanning electron microscopy. Comparisons of continuous parameters under study between experimental groups were performed using the t-test (age, cold ischemia time, exposure to cryoprotectant, time of storage, total thawing time, mean thawing rate, morphology scoring of thawed HSVG) and the median test (HSVG length). Categorical parameters (sex and blood group) were formally tested using the chi-square test.

RESULTS

All samples were evaluated according to morphological changes and scored in terms of morphologically intact endothelium, confluent endothelium with structural inhomogeneity, disruption of the intercellular contacts, separation of the endothelial cells, complete loss of the endothelium, and damage of the subendothelial layers. There is no statistically significant difference between the sample sets at the significance level of 0.05. There was no association with donors' age, sex, and time of storage.

CONCLUSIONS

Human cryopreserved saphenous vein grafts in our experimental work showed no difference in terms of structural deterioration of the endothelial surface and basal membrane depending on different thawing protocols used.

Failure properties and microstructure of healthy and aneurysmatic human thoracic aortas subjected to uniaxial extension with a focus on the media

Current clinical practice for aneurysmatic interventions is often based on the maximum diameter of the vessel and/or on the growth rate, although rupture can occur at any diameter and growth rate, leading to fatality. For 27 medial samples obtained from 12 non-aneurysmatic (control) and 9 aneurysmatic human descending thoracic aortas we examined: the mechanical responses up to rupture using uniaxial extension tests of circumferential and longitudinal specimens; the structure of these tissues using second-harmonic imaging and histology, in particular, the content proportions of collagen, elastic fibers and smooth muscle cells in the media. It was found that the mean failure stresses were higher in the circumferential directions (Control-C 1474kPa; Aneurysmatic-C 1446kPa), than in the longitudinal directions (Aneurysmatic-L 735kPa; Control-L 579kPa). This trend was the opposite to that observed for the mean collagen fiber directions measured from the loading axis (Control-L > Aneurysmatic-L > Aneurysmatic-C > Control-C), thus suggesting that the trend in the failure stress can in part be attributed to the collagen architecture. The difference in the mean values of the out-of-plane dispersion in the radial/longitudinal plane between the control and aneurysmatic groups was significant. The difference in the mean values of the mean fiber angle from the circumferential direction was also significantly different between the two groups. Most specimens showed delamination zones near the ruptured region in addition to ruptured collagen and elastic fibers. This study provides a basis for further studies on the microstructure and the uniaxial failure properties of (aneurysmatic) arterial walls towards realistic modeling and prediction of tissue failure. STATEMENT OF SIGNIFICANCE: A data set relating uniaxial failure properties to the microstructure of non-aneurysmatic and aneurysmatic human thoracic aortic medias under uniaxial extension tests is presented for the first time. It was found that the mean failure stresses were higher in the circumferential directions, than in the longitudinal directions. The general trend for the failure stresses was Control-C > Aneurysmatic-C > Aneurysmatic-L > Control-L, which was the opposite of that observed for the mean collagen fiber direction relative to the loading axis (Control-L > Aneurysmatic-L > Aneurysmatic-C > Control-C) suggesting that the trend in the failure stress can in part be attributed to the collagen architecture. This study provides a first step towards more realistic modeling and prediction of tissue failure.

Serum- and albumin-free cryopreservation of endothelial monolayers with a new solution

Cryopreservation is the only long-term storage option for the storage of vessels and vascular constructs. However, endothelial barrier function is almost completely lost after cryopreservation in most established cryopreservation solutions. We here aimed to improve endothelial function after cryopreservation using the 2D-model of porcine aortic endothelial cell monolayers. The monolayers were cryopreserved in cell culture medium or cold storage solutions based on the 4°C vascular preservation solution TiProtec^®, all supplemented with 10% DMSO, using different temperature gradients. After short-term storage at −80°C, monolayers were rapidly thawed and re-cultured in cell culture medium. Thawing after cryopreservation in cell culture medium caused both immediate and delayed cell death, resulting in 11 ± 5% living cells after 24 h of re-culture. After cryopreservation in TiProtec and chloride-poor modifications thereof, the proportion of adherent viable cells was markedly increased compared to cryopreservation in cell culture medium (TiProtec: 38 ± 11%, modified TiProtec solutions ≥ 50%). Using these solutions, cells cryopreserved in a sub-confluent state were able to proliferate during re-culture. Mitochondrial fragmentation was observed in all solutions, but was partially reversible after cryopreservation in TiProtec and almost completely reversible in modified solutions within 3 h of re-culture. The superior protection of TiProtec and its modifications was apparent at all temperature gradients; however, best results were achieved with a cooling rate of −1°C/min. In conclusion, the use of TiProtec or modifications thereof as base solution for cryopreservation greatly improved cryopreservation results for endothelial monolayers in terms of survival and of monolayer and mitochondrial integrity.

Repeated Loading Behavior of Pediatric Porcine Common Carotid Arteries

Rapid flexion and extension of the neck may occur during scenarios associated with traumatic brain injury (TBI), and understanding the mechanical response of the common carotid artery (CCA) to longitudinal stretch may enhance understanding of contributing factors that may influence CCA vasospasm and exacerbate ischemic injury associated with TBI. Immature (4-week-old) porcine CCAs were tested under subcatastrophic (1.5 peak stretch ratio) cyclic loading at 3 Hz for 30 s. Under subcatastrophic cyclic longitudinal extension, the immature porcine CCA displays softening behavior. This softening can be represented by decreasing peak stress and increasing corner stretch values with an increasing number of loading cycles. This investigation is an important first step in the exploration of fatiguelike behavior in arterial tissue that may be subjected to repeated longitudinal loads.

Quantification and comparison of the mechanical properties of four human cardiac valves

OBJECTIVE

Although having the same ability to permit unidirectional flow within the heart, the four main valves-the mitral valve (MV), aortic (AV), tricuspid (TV) and pulmonary (PV) valves-experience different loading conditions; thus, they exhibit different structural integrity from one another. Most research on heart valve mechanics have been conducted mainly on MV and AV or an individual valve, but none quantify and compare the mechanical and structural properties among the four valves from the same aged patient population whose death was unrelated to cardiovascular disease.

METHODS

A total of 114 valve leaflet samples were excised from 12 human cadavers whose death was unrelated to cardiovascular disease (70.1±3.7years old). Tissue mechanical and structural properties were characterized by planar biaxial mechanical testing and histological methods. The experimental data were then fitted with a Fung-type constitutive model.

RESULTS

The four valves differed substantially in thickness, degree of anisotropy, and stiffness. The leaflets of the left heart (the AV leaflets and the anterior mitral leaflets, AML) were significantly stiffer and less compliant than their counterparts in the right heart. TV leaflets were the most extensible and isotropic, while AML and AV leaflets were the least extensible and the most anisotropic. Age plays a significant role in the reduction of leaflet stiffness and extensibility with nearly straightened collagen fibers observed in the leaflet samples from elderly groups (65years and older).

CONCLUSIONS

Results from 114 human leaflet samples not only provided a baseline quantification of the mechanical properties of aged human cardiac valves, but also offered a better understanding of the age-dependent differences among the four valves. It is hoped that the experimental data collected and the associated constitutive models in this study can facilitate future studies of valve diseases, treatments and the development of interventional devices.

STATEMENT OF SIGNIFICANCE

Most research on heart valve mechanics have been conducted mainly on mitral and aortic valves or an individual valve, but none quantify and compare the mechanical and structural properties among the four valves from the same relatively healthy elderly patient population. In this study, the mechanical and microstructural properties of 114 leaflets of aortic, mitral, pulmonary and tricuspid valves from 12 human cadaver hearts were mechanically tested, analyzed and compared. Our results not only provided a baseline quantification of the mechanical properties of aged human valves, but a age range between patients (51-87years) also offers a better understanding of the age-dependent differences among the four valves. It is hoped that the obtained experimental data and associated constitutive parameters can facilitate studies of valve diseases, treatments and the development of interventional devices.

Failure and Fatigue Properties of Immature Human and Porcine Parasagittal Bridging Veins

Tearing of the parasagittal bridging veins (BVs) is thought to be a source of extra-axial hemorrhage (EAH) associated with abusive traumatic brain injuries (TBIs) in children. However, the pediatric BV mechanical properties are unknown. We subjected porcine adult, porcine newborn, and human infant BVs to either a low rate pull to failure, a high rate pull to failure, or 30 s of cyclic loading followed by a pull to failure. An additional subset of human infant BVs was examined for viscoelastic recovery between two cycling episodes. We found that human infant BVs are stronger than porcine BVs, and BV mechanical properties are rate dependent, but not age dependent. Successive cyclic loading to a uniform level of stretch softened BVs with decaying peak stresses, and shifted their stress-stretch relationship. These data are critical in understanding BV tissue behavior in accidental and abusive trauma scenarios, which in turn may clarify circumstances that may be injurious to young children.

A novel method for long-lasting preservation of arterial grafts

BACKGROUND

Autologous venous grafts generally give best results for arterial bypass grafting in cases of arterial stenosis. When no suitable venous graft can be found, synthetic prosthetic graft may be an alternative. Prostheses are easily accessible but susceptible to infection. In these cases, the replacement of infected prosthesis by the human arterial allograft is the best treatment option. The question arises whether we could prepare a graft meeting mechanical conditions of an artery immunologically inert and resistant to bacterial infection.

MATERIALS AND METHODS

LEW and BN rat aortic segments were placed in dehydrated sodium chloride and stored for 1 to 12 mo. Then, they were transplanted orthotopically as aortic grafts for 3 to 15 mo in syngenic and allogenic combination. No immunosuppression was used. Patency, pulsation, and frequency of development of aneurysms were studied. The tensile strength and maximum intraluminal pressures were measured. Morphology of grafts was evaluated on histology and electron microscopy. The endothelial and infiltrating cells were identified.

RESULTS

Transplanted allogeneic aortic grafts preserved in anhydrous sodium chloride up to 12 mo remained patent for 15 mo. Hypertrophy of intima with endothelial cells lining the inner surface and single muscle cells between elastic fibers were seen. Normal structure of collagen and elastic fibers was maintained. Only minor-host mononuclear infiltrates were seen around the preserved allografts.

CONCLUSIONS

Rat aortas preserved in anhydrous sodium chloride retain patency and function even 15 mo after transplantation. Such grafts retain their wall structure and evoke only minor recipient reaction. Our results confirm that anhydrous sodium chloride may be used for arterial grafts preservation. Low immunogenicity is additional advantage.

Cell-derived matrices for tissue engineering and regenerative medicine applications

The development and application of decellularized extracellular matrices (ECM) has grown rapidly in the fields of cell biology, tissue engineering and regenerative medicine in recent years. Similar to decellularized tissues and whole organs, cell-derived matrices (CDMs) represent bioactive, biocompatible materials consisting of a complex assembly of fibrillar proteins, matrix macromolecules and associated growth factors that often recapitulate, at least to some extent, the composition and organization of native ECM microenvironments. The unique ability to engineer CDMs de novo based on cell source and culture methods makes them an attractive alternative to conventional allogeneic and xenogeneic tissue-derived matrices that are currently harvested from cadaveric sources, suffer from inherent heterogeneity, and have limited ability for customization. Although CDMs have been investigated for a number of biomedical applications, including adhesive cell culture substrates, synthetic scaffold coatings, and tissue engineered products, such as heart valves and vascular grafts, the state of the field is still at a relatively nascent stage of development. In this review, we provide an overview of the various applications of CDM and discuss successes to date, current limitations and future directions.

Tension to passively cinch the mitral annulus through coronary sinus access: an ex vivo study in ovine model

INTRODUCTION

The transcatheter mitral valve repair (TMVR) technique utilizes a stent to cinch a segment of the mitral annulus (MA) and reduces mitral regurgitation. The cinching mechanism results in reduction of the septal-lateral distance. However, the mechanism has not been characterized completely. In this study, a method was developed to quantify the relation between cinching tension and MA area in an ex vivo ovine model.

METHOD

The cinching tension was measured from a suture inserted within the coronary sinus (CS) vessel with one end tied to the distal end of the vessel and the other end exited to the CS ostium where it was attached to a force transducer on a linear stage. The cinching tension, MA area, septal-lateral (S-L) and commissure-commissure (C-C) diameters and leakage was simultaneously measured in normal and dilated condition, under a hydrostatic left ventricular pressure of 90 mm Hg.

RESULTS

The MA area was increased up to 22.8% after MA dilation. A mean tension of 2.1 ± 0.5 N reduced the MA area by 21.3 ± 5.6% and S-L diameter by 24.2 ± 5.3%. Thus, leakage was improved by 51.7 ± 16.2% following restoration of normal MA geometry.

CONCLUSION

The cinching tension generated by the suture acts as a compensation force in MA reduction, implying the maximum tension needed to be generated by annuloplasty device to restore normal annular size. The relationship between cinching tension and the corresponding MA geometry will contribute to the development of future TMVR devices and understanding of myocardial contraction function.

Uniaxial tensile testing approaches for characterisation of atherosclerotic plaques

The pathological changes associated with the development of atherosclerotic plaques within arterial vessels result in significant alterations to the mechanical properties of the diseased arterial wall. There are several methods available to characterise the mechanical behaviour of atherosclerotic plaque tissue, and it is the aim of this paper to review the use of uniaxial mechanical testing. In the case of atherosclerotic plaques, there are nine studies that employ uniaxial testing to characterise mechanical behaviour. A primary concern regarding this limited cohort of published studies is the wide range of testing techniques that are employed. These differing techniques have resulted in a large variance in the reported data making comparison of the mechanical behaviour of plaques from different vasculatures, and even the same vasculature, difficult and sometimes impossible. In order to address this issue, this paper proposes a more standardised protocol for uniaxial testing of diseased arterial tissue that allows for better comparisons and firmer conclusions to be drawn between studies. To develop such a protocol, this paper reviews the acquisition and storage of the tissue, the testing approaches, the post-processing techniques and the stress-strain measures employed by each of the nine studies. Future trends are also outlined to establish the role that uniaxial testing can play in the future of arterial plaque mechanical characterisation.

Novel biaxial tensile test for studying aortic failure phenomena at a microscopic level

Background

An aortic aneurysm is a local dilation of the aorta, which tends to expand and often results in a fatal rupture. Although larger aneurysms have a greater risk of rupture, some small aneurysms also rupture. Since the mechanism of aortic rupture is not well understood, clarification of the microstructure influencing the failure to rupture is important. Since aortic tissues are stretched biaxially in vivo, we developed a technique to microscopically observe the failure of an aortic rupture during biaxial stretch.

Methods

A thinly sliced porcine thoracic aortic specimen was adhered to a circular frame and pushed onto a cylinder with a smaller diameter to stretch the specimen biaxially. To induce failure to rupture at the center, the specimen was thinned at the center of the hole as follows: the specimen was frozen while being compressed with metal plates having holes, which were 3 mm in diameter at their centers; the specimen was then sliced at 50-μm intervals and thawed.

Results

The ratio of the thickness at the center to the peripheral area was 99.5% for uncompressed specimens. The ratio decreased with an increase in the compression ratio ε_c and was 47.3% for specimens with ε_c = 40%. All specimens could be stretched until failure to rupture. The probability for crack initiation within the cylinder was <30% and 100% for specimens with ε_c <10% and ε_c >30%, respectively. Among specimens ruptured within the cylinder, 93% of those obtained from the mid-media showed crack initiation at the thin center area.

Conclusions

Aortic tissues were successfully stretched biaxially until failure, and their crack initiation points were successfully observed under a microscope. This could be a very useful and powerful method for clarifying the mechanism of aortic rupture. We are planning to use this technique for a detailed investigation of events occurring at the point of failure when the crack initiates in the aortic aneurysm wall.

Cryopreservation of vascular tissues

Cryopreservation of human blood vessels may become an important tool in bypass surgery and peripheral vascular reconstruction. Ideally cryopreservation of a blood vessel should preserve functional characteristics comparable to those of fresh controls. The key advantage of cryopreservation is the fact that storage at deep subzero temperatures allows storage of structurally intact living vascular tissues for virtually infinite time. Originally developed for long-time storage of isolated cells, the techniques of cryopreservation of tissues are challenged by the fact that these are complex multicellular systems containing diverse types of cells with differing requirements for optimal preservation. Therefore, the post-thaw functional activity of vascular tissues is determined by the type of blood vessel and, in addition, by the cell packing effect. Moreover, evidence from pharmacological studies suggests that cryopreservation induces tissue specific changes in transmembrane signaling and the mechanisms coupling intracellular calcium release, sensitivity and calcium entry into the smooth muscle cells.

Case study: first implantation of a frozen, devitalized tissue-engineered vascular graft for urgent hemodialysis access

Previously we reported on the mid- to long-term follow-up in the first clinical trial to use a completely autologous tissue-engineered graft in the high pressure circulation. In these early studies, living grafts were built from autologous fibroblasts and endothelial cells obtained from small skin and vein biopsies. The graft was assembled using a technique called tissue-engineering by self-assembly (TESA), where robust conduits were grown without support from exogenous biomaterials or synthetic scaffolding. One limitation with this earlier work was the long lead times required to build the completely autologous vascular graft. Here we report the first implant of a frozen, devitalized, completely autologous Lifeline™ vascular graft. In a departure from previous studies, the entire fibroblast layer, which provides the mechanical backbone of the graft, was air-dried then stored at -80°C until shortly before implant. Five days prior to implant, the devitalized conduit was rehydrated, and its lumen was seeded with living autologous endothelial cells to provide an antithrombogenic lining. The graft was implanted as an arteriovenous shunt between the brachial artery and the axillary vein in a patient who was dependent upon a semipermanent dialysis catheter placed in the femoral vein. Eight weeks postoperatively, the graft functions without complication. This strategy of preemptive skin and vein biopsy and cold-preserving autologous tissue allows the immediate availability of an autologous arteriovenous fistula, and is an important step forward in our strategy to provide allogeneic tissue-engineered grafts available "off-the-shelf".

Significant differences in the material properties between aged human and porcine aortic tissues

OBJECTIVE

Currently, percutaneous aortic valve (PAV) replacement devices are being investigated to treat aortic stenosis in patients deemed to be of too high a risk for conventional open-chest surgery. Successful PAV deployment and function are heavily reliant on the tissue-stent interaction. Many PAV feasibility trials have been conducted with porcine models under the assumption that these tissues are similar to human; however, this assumption may not be valid. The goal of this study was to characterize and compare the biomechanical properties of aged human and porcine aortic tissues.

METHODS

The biaxial mechanical properties of the left coronary sinus, right coronary sinus, non-coronary sinus, and ascending aorta of eight aged human (90.1 ± 6.8 years) and 10 porcine (6-9 months) hearts were quantified. Tissue structure was analyzed via histological techniques.

RESULTS

Aged human aortic tissues were significantly stiffer than the corresponding porcine tissues in both the circumferential and longitudinal directions (p < 0.001). In addition, the nearly linear stress-strain behavior of the porcine tissues, compared with the highly nonlinear response of the human tissues at a low strain range, suggested structural differences between the aortic tissues from these two species. Histological analysis revealed that porcine samples were composed of more elastin and less collagen fibers than the respective human samples.

CONCLUSIONS

Significant material and structural differences were observed between the human and porcine tissues, which raise questions on the validity of using porcine models to investigate the biomechanics involved in PAV intervention.

The “in situ” expression of Human Leukocyte Antigen Class I antigens is not altered by cryopreservation in human arterial allografts

This study was aimed to establish whether the cryopreservation procedure we currently use in clinics can modify arterial homograft antigenicity. To this purpose, we performed an immunohistochemical study on fresh and cryopreserved human arterial homografts to visualize the expression of HLA class I heavy and light chains "in situ" by using the HC-10 and Namb-1 monoclonal antibodies. Human femoral arteries and thoracic aortas were harvested from 18 heart-beating donors and sampled before and after cryopreservation. Arterial segments were frozen in liquid nitrogen vapors in a controlled rate freezing system. After thawing, samples were processed for routine immunohistochemistry. To standardize immunostaining, flow-cytometry indirect immunofluorescence analysis was performed on HUVEC; immunohistochemistry of human ovarian cortical vessels was performed as an additional positive control. Negative controls were performed by omitting tissue incubation with primary antibodies. HLA-class I antigens were markedly expressed by endothelial cells lining surface intima and adventitial vasa vasorum; a moderate expression was found in medial smooth muscle cells. Except for the surface unreactivity caused by loss of endothelium, results from cryopreserved arterial allografts were strictly comparable to those observed in fresh, unfrozen tissues. These results support the view that cryopreserved arterial allografts are immunogenic as their fresh counterparts; apart from smooth muscle cells which retained a moderate expression of HLA class I antigens following cryopreservation, our study suggests that the highly HC-10 positive endothelial cells we found to line the rich adventitial network of vasa vasorum are expected to be one of the major targets of the serological response in the recipient.

Elastic properties of the reconstructed aorta in hypoplastic left heart syndrome

BACKGROUND

Patients with repaired coarctation of the aorta retain abnormal elastic properties of the aorta. It is not known whether patients with hypoplastic left heart syndrome also manifest abnormal elastic properties after palliative surgery. The presence of such abnormalities may have important clinical implications as reduced aortic compliance might adversely impact single right ventricular function.

METHODS

We prospectively evaluated the elastic properties of the aorta in a cohort of patients with hypoplastic left heart syndrome who had undergone the Norwood procedure with aortic arch reconstruction and subsequent bidirectional Glenn or Fontan procedure. The hypoplastic left heart syndrome patients (n = 20) were compared with single-ventricle patients (n = 18) without history of arch reconstruction and patients with double-ventricular lesions (n = 22). Aortic elastic function was quantified by distensibility index and stiffness index. M-mode measurements of the transverse aortic arch were obtained with transesophageal echocardiography under general anesthesia. Patients were evaluated at a median age of 22.2 months with no age difference between patient subgroups.

RESULTS

Distensibility index was significantly less (p = 0.007) and stiffness index greater (p = 0.005) in the reconstructed arch of hypoplastic left heart syndrome patients compared with single-ventricle and double-ventricle patients.

CONCLUSIONS

Patients with hypoplastic left heart syndrome after Norwood palliation have increased aortic stiffness and decreased distensibility in the reconstructed transverse arch. As previous studies in adults have shown that decreased aortic compliance increases the energy cost of cardiac ejection, examination of modifications to the surgical technique that might improve elastic properties is warranted.

Cryopreservation procedure does not modify human carotid homografts mechanical properties: an isobaric and dynamic analysis

The viscoelastic and inertial properties of the arterial wall are responsible for the arterial functional role in the cardiovascular system. Cryopreservation is widely used to preserve blood vessels for vascular reconstruction but it is controversially suspected to affect the dynamic behaviour of these allografts. The aim of this work was to assess the cryopreservation's effects on human arteries mechanical properties. Common carotid artery (CCA) segments harvested from donors were divided into two groups: Fresh (n = 18), tested for 24-48 h after harvesting, and Cryopreserved (n = 18) for an average time of 30 days in gas-nitrogen phase, and finally defrosted. Each segment was tested in a circulation mock, and its pressure and diameter were registered at similar pump frequency, pulse and mean pressure levels, including those of normotensive and hypertensive conditions. A compliance transfer function (diameter/pressure) derived from a mathematical adaptive modelling was designed for the on line assessment of the arterial wall dynamics and its frequency response. Assessment of arterial wall dynamics was made by measuring its viscous (eta), inertial (M) and elastic (E) properties, and creep and stress relaxation time constant (tauC and tauSR, respectively). The frequency response characterization allowed to evaluate the arterial wall filter or buffer function. Results showed that non-significant differences exist between wall dynamics and buffer function of fresh and cryopreserved segments of human CCA. In conclusion, our cryopreservation method maintains arterial wall functional properties, close to their fresh values.

Smooth muscle cell injury after cryopreservation of human thoracic aortas

The cryopreservation protocol we use for arterial reconstructive surgery has been studied to evaluate smooth muscle cell (SMC) structural integrity and viability before implantation. Samples of human thoracic aortas (HTA) were harvested from five multi-organ donors. Sampling included unfrozen and cryopreserved specimens. Cryopreservation was performed using RPMI with human albumin and 10% Me(2)SO in a controlled-rate freezing apparatus. Thawing was accomplished by submerging bags in a water bath (39 degrees C) followed by washings in cooled saline. In situ cell preservation as investigated by light and transmission electron microscopy showed that SMCs from cryopreserved HTA had nuclear and cytoplasmic changes. A TUNEL assay, performed to detect DNA fragmentation in situ, showed increased SMC nuclear positivity in cryopreserved HTA when compared to unfrozen samples. 7-AAD flow cytometry assay of cells derived from cryopreserved HTA showed that an average of 49+/-16% cells were unlabeled after cryopreservation. Organ cultures aimed to study cell ability to recover cryopreservation damage showed a decreasing number of SMCs from day 4 to day 15 in cryopreserved HTA. In conclusion, the cryopreservation protocol applied in this study induces irreversible damage of a significant fraction of arterial SMCs.

Mechanical properties of porcine and human arteries: implications for coronary anastomotic connectors

BACKGROUND

To determine whether the pig is an appropriate experimental animal for studies on distal anastomotic connectors in coronary artery bypass surgery, the mechanical properties of young porcine and old human coronary and internal mammary arteries were compared within and beyond the physiologic range of strains.

METHODS

Coronary arteries from 6 humans and 8 pigs were studied as well as internal mammary arteries of 3 humans and 6 pigs (human, aged 61 to 85 years; pig, 78.7 +/- 5.8 kg [mean +/- SD]). Pressure-diameter, pressure-axial force, circumferential and axial stress-strain relations, and dimensions were measured.

RESULTS

The dimensions of the porcine and human coronary and internal mammary artery were generally similar but wall thickness was smaller in the porcine internal mammary artery (0.35 +/- 0.07 mm versus 0.71 +/- 0.06 mm, respectively, p = 0.002). The porcine internal mammary artery wall was less elastic than the coronary artery wall, whereas in humans both arteries displayed similar elasticity. Overall the porcine arteries were far more elastic in both circumferential and axial direction compared with the human arteries. Consequently the porcine arteries could be safely stretched by 60% to 70% compared with about 20% for the human arteries before reaching their maximum circumferential strain.

CONCLUSIONS

The three times greater elasticity of porcine compared with human coronary and internal mammary artery walls may result in underestimation of wall stress and the risk of wall injury when coronary connectors that involve overstretching of the wall are evaluated in the pig.