A three-dimensional axis for the study of femoral neck orientation

Fully automated measurement of femoral neck axis line in anatomical coordinate system using CT images

The femoral neck is the most vulnerable site for fractures within the hip joint. Due to its complex three-dimensional structure and special blood supply mechanism, the treatment of femoral neck fractures is difficult and the healing probability is low. Using computers to accurately and automatically locate the femoral neck axis can detect the density of femoral neck, the neck-shaft angle and the anteversion angle, which effectively assists in the prevention and treatment of femoral neck fractures. Additionally, the traditional femoral neck axis positioning schemes have limitations in accuracy, automation and assistance to bone density measurement. Therefore, this paper proposes a new fully automatic femoral neck axis positioning method. First, the coronal plane's three-dimensional reconstruction highlights the details of the target bone, and then designs a coarse localization module based on multi-scale template matching to obtain the rough range of the femoral neck axis. Then, a detailed localization module based on the femoral neck virtual slices is used to obtain the contour centers and accurately locates the three-dimensional femoral neck axis. This method has been validated in comparison with the manual measurement method. Experimental results revealed that the extracted femoral neck axis in this study can achieve automation, ensure accuracy, and avoid subjective effects effectively and has the potential value to be applied in the prevention and treatment of femoral neck fractures.

Limb and hip morphology of two African colobine monkeys and its relationship to the mechanics of leaping and bounding locomotion

OBJECTIVES

Although a bounding gait is practiced by a diversity of animals, the morphological characteristics, kinematics, and energetics associated with this locomotor form remain poorly understood. This study focuses on the locomotor anatomy of two species of African colobine monkeys (Piliocolobus badius, a leaper, and Colobus polykomos, a leaper-bounder) in an effort to assess if bounding should be considered a unique primate locomotor category or is better viewed as a behavior on a leaping continuum.

MATERIALS AND METHODS

A total of 53 femora, 28 humeri, and 45 ossa coxae from the two species provide comparative morphological data. Free-body models of bounding and leaping are presented to characterize loading conditions. Species differences in morphometric traits are evaluated via parametric and nonparametric tests (i.e., analysis of variance, resampling).

RESULTS

C. polykomos exhibits traits that align more closely with putative leaping specializations when compared to P. badius (e.g., large femoral head, long femur, low femoral neck angle), while also possessing certain traits that are not (e.g., long femoral neck and reduced relative femoral robusticity). Consequently, C. polykomos likely experiences absolutely greater joint forces at the hip and higher bending at the femoral neck both when it leaps and bounds, given equivalent accelerations in bounding and leaping.

DISCUSSION

Bounding is best described as a form of low-acceleration leaping. If bounding has lower acceleration requirements relative to leaping, C. polykomos achieves locomotor competence with less energy, relatively smaller bending moments, and reduced joint forces.

Safe range of femoral neck system insertion and the risk of perforation

BACKGROUND

Internal fixation of the femoral neck carries a risk of perforation due to the presence of the isthmus of the femoral neck. At present, there are few studies on the safe and risk zones of the femoral neck system (FNS) implantation. This study aimed to recommend the safe range of injection of FNS in the lateral wall of the proximal femur, parallel to the axis of the femoral neck, during FNS treatment of femoral neck fracture (FNF).

METHODS

Femoral computed tomography (CT) data of 80 patients (male: 40; female: 40) who met the inclusion criteria were collected. Mimics 21.0 software was used to complete the modeling. 3-Matic 13.0 software was used to establish the axis of the femoral neck and its vertical plane, perform the cutting of the femoral neck, and project it on the vertical plane of the femoral neck axis. After matching a rectangle for each projection map, all sample sizes (80 cases) were standardized and superimposed to obtain gradient maps of the safe zone (SZ) and dangerous zone (RZ), thereby securing edge key points and safe FNS insertion range.

RESULTS

In the 80 samples, the mean diameter of the smallest femoral neck section was 33.87 ± 2.32 mm for men and 29.36 ± 1.92 mm for women. All 80 femoral necks had safe and risky areas. The SZ/S × 100% was 77.59 (± 2.22%), and the RS/S × 100% was 22.39% (± 2.22%). The risk area was composed of four parts: (1), (2), (3), and (4), respectively, corresponding to 3.45 ± 1.74%, 5.51 ± 2.63%, 6.22 ± 1.41%, and 7.22 ± 1.39%. Four marginal key points, perforation risk, and safe ranges (SR) of FNS were analyzed on the lateral wall of the femoral neck.

CONCLUSIONS

The SR of FNS placement was recommended by digital simulation. In addition, Regions (3) and (4) posed a higher risk of penetrating the cortex. Using the gradient map of RZ for preoperative evaluation is recommended to avoid iatrogenic perforation.

Mathematical calculation of the difference in shortening length after two types of proximal femoral varus and an investigation of their applicable conditions: an own-pair design

BACKGROUND

The shortening length of the lower extremity after the proximal femoral osteotomy is an important issue to be considered in preoperative planning of developmental dysplasia of the hip (DDH) in children. There is still a lack of research on shortening the length of the lower extremities in different proximal femoral osteotomy varus styles. We aimed to verify the relationship between the shortening length after "point-to-face" and "face-to-face" varus osteotomy and proposed a formula for calculating the difference in shortening length and verified its feasibility.

METHODS

Fifty-five children with unilateral DDH were enrolled. The preoperative hip CT data were imported into mimics 21, 3-Matic 10 (Materialise, Leuven, Belgium) for femoral reconstruction and simulated osteotomy, and the difference (t) was calculated by directly measuring the length of the proximal femur after osteotomy. d* sinθ was measured in a three-dimensional environment to calculate the difference in femoral shortening length between the two osteotomy methods (t').

RESULTS

The results of the direct measurement method and the formula measurement method are shown in the table; the differences in the results of the femoral shortening length difference were not statistically significant (P > 0.05). The limits of agreement (95%) of the difference values using Bland-Altman analysis were between - 0.50 and 0.46 mm, with a mean of - 0.02 mm, indicating a high agreement between the two methods. r = 0.99 (P < 0.05) for the Pearson correlation analysis between the direct measurement method and the calculated method showed that the two methods were significantly correlated.

CONCLUSIONS

The derived formula can accurately calculate the difference in the shortening length of the proximal femur after "point-to-face" and "face-to-face" varus osteotomy in children with DDH, which is suitable for clinical application.

Offset nail fixation for intertrochanteric fractures improves reduction and lag screw position

Background

Surgery for intertrochanteric fractures using intramedullary hip nails (IHNs) is among the most common surgical procedures in the orthopedic field. Although IHNs provide good overall outcomes, they sometimes cause complications, such as loss of reduction and cut-out. Here, we investigated the usefulness of IHNs with an anterior offset (Best Fit Nail® [BFN]) in maintaining fragment reduction and ensuring proper lag screw position compared with conventional non-offset nails (Proximal Femoral Nail Antirotation® [PFNA]), using postoperative computed tomography (CT).

Methods

Fifty consecutive patients with intertrochanteric fractures who underwent surgery with BFNs (BFN group) and 50 patients who underwent surgery with PFNAs (PFNA group) were retrospectively analyzed. Indices evaluated by postoperative CT were displacement distance of proximal fragment relative to distal fragment, reduction status (intramedullary, anatomical, and extramedullary types), lag screw direction, and angle between lag screw and femoral neck axis (deviation angle).

Results

Median [interquartile range] displacement distance was significantly smaller in the BFN group (0 [0, 0] mm) compared with the PFNA group (5.2 [3.6, 7.1] mm) (p<0.001). Reduction status was significantly better in the BFN group (anatomical type, 40 cases; intramedullary type, in 9 cases, and extramedullary type in 1 case) than in the PFNA group (anatomical type, 6 cases; intramedullary type, 43 cases; extramedullary type, 1 case) (p<0.001). Deviation of lag screw direction was observed in significantly fewer cases in the BFN group (20 cases; 40%) compared with the PFNA group (36 cases; 72%). Lag screw deviation angle was significantly smaller in the BFN group (−0.71°±4.0°) compared with the PFNA group (6.9°±7.1°). No adverse events related to surgery were observed in either group.

Conclusions

Intertrochanteric fracture surgery using offset BFNs exhibited significantly smaller displacement distance, better reduction status, and higher frequency of no deviation with central lag screw position, compared with surgery using non-offset PFNAs.

Hybrid curvature-geometrical detection of landmarks for the automatic analysis of the reduction of supracondylar fractures of the femur

BACKGROUND AND OBJECTIVE

The analysis of the features of certain tissues is required by many procedures of modern medicine, allowing the development of more efficient treatments. The recognition of landmarks allows the planning of orthopedic and trauma surgical procedures, such as the design of prostheses or the treatment of fractures. Formerly, their detection has been carried out by hand, making the workflow inaccurate and tedious. In this paper we propose an automatic algorithm for the detection of landmarks of human femurs and an analysis of the quality of the reduction of supracondylar fractures.

METHODS

The detection of anatomical landmarks follows a knowledge-based approach, consisting of a hybrid strategy: curvature and spatial decomposition. Prior training is unrequired. The analysis of the reduction quality is performed by a side-to-side comparison between healthy and fractured sides. The pre-clinical validation of the technique consists of a two-stage study: Initially, we tested our algorithm with 14 healthy femurs, comparing the output with ground truth values. Then, a total of 140 virtual fractures was processed to assess the validity of our analysis of the quality of reduction. A two-sample t test and correlation coefficients between metrics and the degree of reduction have been employed to determine the reliability of the algorithm.

RESULTS

The average detection error of landmarks was maintained below 1.7 mm and 2^∘ (p< 0.01) for points and axes, respectively. Regarding the contralateral analysis, the resulting P-values reveal the possibility to determine whether a supracondylar fracture is properly reduced or not with a 95% of confidence. Furthermore, the correlation is high between the metrics and the quality of the reduction.

CONCLUSIONS

This research concludes that our technique allows to classify supracondylar fracture reductions of the femur by only analyzing the detected anatomical landmarks. A initial training set is not required as input of our algorithm.

The accuracy of restoration of femoral head centre of rotation in the anteroposterior plane after uncemented total hip arthroplasty : a CT-based study

AIMS

Hip arthroplasty aims to accurately recreate joint biomechanics. Considerable attention has been paid to vertical and horizontal offset, but femoral head centre in the anteroposterior (AP) plane has received little attention. This study investigates the accuracy of restoration of joint centre of rotation in the AP plane.

METHODS

Postoperative CT scans of 40 patients who underwent unilateral uncemented total hip arthroplasty were analyzed. Anteroposterior offset (APO) and femoral anteversion were measured on both the operated and non-operated sides. Sagittal tilt of the femoral stem was also measured. APO measured on axial slices was defined as the perpendicular distance between a line drawn from the anterior most point of the proximal femur (anterior reference line) to the centre of the femoral head. The anterior reference line was made parallel to the posterior condylar axis of the knee to correct for rotation.

RESULTS

Overall, 26/40 hips had a centre of rotation displaced posteriorly compared to the contralateral hip, increasing to 33/40 once corrected for sagittal tilt, with a mean posterior displacement of 7 mm. Linear regression analysis indicated that stem anteversion needed to be increased by 10.8° to recreate the head centre in the AP plane. Merely matching the native version would result in a 12 mm posterior displacement.

CONCLUSION

This study demonstrates the significant incidence of posterior displacement of the head centre in uncemented hip arthroplasty. Effects of such displacement include a reduction in impingement free range of motion, potential alterations in muscle force vectors and lever arms, and impaired proprioception due to muscle fibre reorientation. Cite this article: Bone Joint Res 2022;11(3):180-188.

The oblique triangle configuration of three parallel screws for femoral neck fracture fixation using computer-aided design modules

Closed reduction and internal fixation with three cannulated compression screws is a common method for treating femoral neck fractures in young and middle-aged patients. Protocols including the inverted triangle configuration and dispersion of the screws still needed further supports. The purpose of this study was to explore a novel oblique triangle configuration (OTC) of three screws in fixing femoral neck fractures based on the morphology of the femoral neck isthmus (FNI). The computer-aided design modules were used to explore the ideal spatial configuration with largest triangle by three parallel screws. A univariate evaluation model was established based on the oval-like cross-section of the FNI. When the three screws were positioned by the OTC, Inverted Equilateral Triangle Configuration (IETC), and the Maximum Area Inverted Isosceles Triangle Configuration (MA-IITC) respectively, the proportion of area and circumference in the cross-section of FNI and the changing trend of proportion were compared under various torsion angles, eccentricity, and cross-sectional area of FNI. The area and circumference ratios of the parallel screws using the OTC method were significantly higher than in the IETC and MA-IITC groups. In the univariate evaluation model, the OTC area ratio and circumference ratio remained stable under the different femoral neck torsion angles, FNI cross-sectional area, and eccentricity. The OTC method provided an ideal spatial configuration for the FNA fixation with the largest area using three parallel screws. The position of the posterior screw was also away from the metaphyseal artery, potentially reducing the possibility of vascular injury and screw penetrating.

Classification of Runners with High versus Low Hip Adduction based on Measures of Pelvis and Femur Morphology

PURPOSE

To determine the most relevant pelvis and femur morphological characteristics for differentiating runners with high versus low hip adduction during running.

METHODS

Fifteen female and 14 male runners underwent instrumented kinematics analysis of overground running and computed tomography scanning of pelvis and femur. The peak hip adduction angle during the stance phase of running was identified for each participant. Using the cohort average of the peak hip adduction angle as the classifying threshold, participants were categorized into high or low hip adduction groups. To determine the most relevant morphologic features for discriminating high and low hip adduction runners, a feature selection-based support vector machine classification analysis was performed.

RESULTS

Out of 15 morphology variables examined, femoral head anteversion and femur length were shown to be the best discriminant variables for group classification. Together, these variables achieved a prediction accuracy of 0.93, sensitivity of 1.0, and specificity of 0.88.

CONCLUSION

Our results highlight the importance of femur morphology in contributing to increased hip adduction during running.

Hip Adduction during Running: Influence of Sex, Hip Abductor Strength and Activation, and Pelvis and Femur Morphology

PURPOSE

To examine the influence of hip abductor strength, neuromuscular activation, and pelvis and femur morphology in contributing to sex differences in hip adduction during running. In addition, we sought to determine the best predictors of hip adduction during running for both men and women.

METHODS

Fifteen female runners and 14 male runners underwent strength testing, instrumented overground running (e.g., kinematics and muscle activation), and computed tomography scanning of pelvis and femur. Morphologic measurements included bilateral hip width to femur length ratio, acetabulum abduction, acetabulum anteversion, femoral anteversion, and femoral neck-shaft angles. Sex differences for all variables were examined using independent t tests. Linear regression was used to assess the ability of each independent variable of interest to predict peak hip adduction during the late swing and stance phase of running.

RESULTS

Compared with men, women exhibited significantly greater peak hip adduction during both late swing (8.5° ± 2.6° vs 6.2° ± 2.8°, P = 0.04) and stance phases of running (13.4° ± 4.2° vs 10.0° ± 3.2°, P = 0.02). In addition, women exhibited significantly lower hip abductor strength (1.8 ± 0.3 vs 2.0 ± 0.3 N·m·kg-1, P = 0.04), greater femoral neck-shaft angles (134.1° ± 5.0° vs 129.9° ± 4.1°, P = 0.01), and greater hip width to femur length ratios than men (0.44 ± 0.02 vs 0.42 ± 0.03, P = 0.03). Femoral anteversion was the only significant predictor of peak hip adduction during late swing (r = 0.36, P = 0.05) and stance (r = 0.41, P = 0.03).

CONCLUSIONS

Our findings highlight the contribution of femur morphology as opposed to hip abductor strength and activation in contributing to hip adduction during running.

Is the contralateral lesser trochanter a reliable reference for planning of total hip arthroplasty - a 3-dimensional analysis

Background

Preoperative templating in total hip arthroplasty (THA) is mandatory to achieve appropriate offset and leg length equality. However, templating methods using the contralateral hip might be susceptible to errors resulting from side-differences in the femoral morphology. The distance of the lesser trochanter to the femoral head center (LTFHD) is a frequently used reference parameter for preoperative planning and intraoperative validation during THA. However, currently no three-dimensional (3D) analysis of side differences of the LTFHD exists.

Methods

Using Computer tomography (CT)-based surface models from 100 paired femora (50 cadavers), side-to-side asymmetry of the LTFHD, femoral length, femoral head diameter (FHD) and femoral antetorsion were analyzed. Univariate linear regression models were established to evaluate potential associations between sides regarding LTFHD and FHD as well as a correlation of these parameters with each other.

Results

Statistically significant side-differences were found for the LTFHD (p = 0.02) and FHD (p = 0.03) with a mean absolute side-difference of 1.6 ± 1.4mm (range 0.1–5.5mm) and 0.4mm ± 0.6mm (range 0–3mm), respectively. The ratio between the LTFHD and FHD was consistent with an average value of 1.16 ± 0.08 and reliable between sides with a correlation coefficient (r) of 0.72 (p < 0.01).

Conclusions

The LTFHD is a reliable reference parameter for preoperative templating and intraoperative validation during THA with a high correlation between sides (r = 0.93, p < 0.01). However, 8 % of the investigated specimens revealed a LTFHD of more than 4mm, which should be anticipated during THA to avoid unsatisfiable results.

The Oval-like Cross-section of Femoral Neck Isthmus in Three-dimensional Morphological Analysis

Objectives

To investigate the cross‐section shape of the femoral neck isthmus (FNI) in three‐dimensional reconstruction model of the femoral neck.

Methods

From December 2009 to December 2012, computed tomography (CT) data of bilateral hip joint from 200 consecutive patients (137 males and 63 females, 69.41 ± 9.21 years old, ranged from 50–85 years old) who underwent surgical treatments for proximal femoral fracture were retrospectively reviewed. The 3D model of the proximal femur was reconstructed, and the “inertia axis” method, which was applied to measure the long and short axes of the cross‐section of the FNI, was established. The cross‐sectional area and perimeter were calculated by a formula using the length of the long and short axes and then compared with the actual measured values by the software. Correlation between the descriptive parameters of the FNI cross‐section (area, perimeter, and eccentricity) and patients' demographics (age, height, and weight) was analyzed. Stepwise linear regression analysis was used to determine the main relevant factors.

Results

The ICC results showed excellent data reproducibility ranged from 0.989 to 0.996. There was no significant difference in the cross‐sectional area of the FNI between the actual measured values and the predicted values using the formula (732.83 ± 126.74 mm²vs 731.62 ± 128.15 mm², P = 0.322). The perimeter using the two methods showed narrow while significant difference (97.86 ± 8.60 mm vs 92.84 ± 8.65 mm, P < 0.001), the actual measured values were about 5 mm greater than the predicted values. The parameters (area, perimeter, and eccentricity) were significantly larger in male than female (P < 0.001). A positive correlation between the cross‐sectional area, perimeter, height, and weight was observed. The stepwise linear regression analysis showed that the regression equation of the FNI area was as follows: Y = −1083.75 + 1033.86 × HEIGHT + 1.92 × WEIGHT, R² = 0.489.

Conclusion

The cross‐section shape of the FNI appears to be oval‐like in the 3D model, which is separated according to the inertia axis, and the findings proposed an anatomical basis for the further study of the spatial configuration of cannulated screws in the treatment of femoral neck fractures.

Three-dimensional morphological analysis of the femoral neck torsion angle-an anatomical study

Background

The femoral neck torsion angle (FNTA) is an important but often neglected parameter in assessments of the anatomical morphology of the femoral neck, which is often confused with the femoral neck anteversion angle (FNAA) in the current literature. Currently, the measurement methods reported in the literature all adopt the naked eye or two-dimensional (2D) visualization method, and the measurement parameters and details are not clearly defined. The objection of this research was to provide a reliable 3D method for determining the femoral neck axis, to improve the measurement method of the FNTA, and to analyze the anatomical and clinical significance of the results.

Methods

Computed tomography (CT) data of 200 patients who received a lower extremity CT angiography examination were selected, and the bilateral femurs were reconstructed with three dimensional CT (3D CT). First, the 3D axis of the femoral neck was built. Second, the long axis of the cross section the femoral neck isthmus (FNI) and femoral neck basilar part (FNB) were confirmed by the “inertia axes” method, and the plane consisting of the long axis of the cross-section and the center of the femoral head was defined as the long axial plane. Third, the coronal plane of the proximal femur was determined through the long axis of the proximal femur and the femoral coronal. Finally, the FNTAs (the angles between the long axial planes and the coronal plane of the proximal femur) of FNI and FNB were measured. The size of FNTA was compared between the sexes and sides and different locations, the correlation between the parameters and age, height, and weight were evaluated.

Results

The difference in FNTA was statistically significant between the isthmus and the basilar part (isthmus 30.58 ± 8.90° vs. basilar part 23.79 ± 3.98°; p < 0.01). Significant difference in the FNTA was observed between the sexes (males 31.99 ± 9.25° vs. females 27.49 ± 7.19°; p < 0.01). The increase in FNTA from the basilar part to the isthmus was 6.79 ± 8.06°, and the male (7.87 ± 8.57°) was greater than the female (4.44 ± 6.23°, p < 0.01). However, no significant difference in the values was observed between sides. Height exerted the greatest effect on the FNTA according to the correlation analysis (r = 0.255, p< 0.001).

Conclusions

This study found a reliable 3D method for the determination of the femoral neck axis improved the measurement method of the FTNTA and made it more accurate and repeatable. The results provided a methodological basis and theoretical support for the research and development of internal fixation device for femoral neck fracture and the spatial configuration of implants in treatment. And the optimal opening point of the femoral medullary cavity was recommended to locate at the posterior position of the top of the femoral neck cross-section during hip replacement.

Standardization of torsional CT measurements of the lower limbs with threshold values for corrective osteotomy

INTRODUCTION

Re-establishing anatomic rotational alignment of shaft fractures of the lower extremities remains challenging. Clinical evaluation in combination with radiological measurements is important in pre- and post-surgical assessment. Based on computed tomography (CT), a range of reference values for femoral torsion (FT) and tibial torsion (TT) have historically been reported, which require standardization to optimize the significant intra- and inter-observer variability. The aims of this study were (re-)evaluation of the reference FT and TT angles, determination of the normal intra-individual side-to-side torsional differences to aid the surgical decision-making process for reoperation, and development of a novel 3D measurement method for FT.

MATERIALS AND METHODS

In this retrospective study, we included 55 patients, without any known torsional deformities of the lower extremities. Two radiologists, independently, measured the rotational profile of the femora using the Hernandez and Weiner CT methods for FT, and the tibiae using the bimalleolar method for TT. The intra-individual side-to-side difference in paired femora and paired tibiae was determined. A 3D technique for FT assessment using InSpace^® was designed.

RESULTS

FT and TT demographic values were lower than previously reported, with mean FT values of 5.1°-8.8° and mean TT values of 25.5°-27.7°. Maximal side-to-side differences were 12°-13° for FT and 12° for TT. The Weiner method for FT was less variable than the Hernandez method. The new 3D method was equivocal to the conventional CT measurements.

CONCLUSION

The results from this study showed that the maximal side-to-side tolerance in asymptomatic normal adult lower extremities is 12°-13° for FT and 12° for TT, which could be a useful threshold for surgeons as indication for revision surgery (e.g., derotational osteotomy). We developed a new 3D CT method for FT measurement which is similar to 2D and could be used in the future for virtual 3D planning.

Using a numerical method to precisely evaluate the alpha angle in a hip image

The alpha angle is a parameter extensively used to assess for cam-type femoroacetabular impingement (FAI) in a 2D image of the hip. As this angle requires estimation of the axis of the femoral neck, the drawing of this axis often results in measurement errors due to subjective judgment, influencing inter-rater and intra-rater agreements. In the present study, sampling points were captured from the edges of a femoral neck and head in the 2D image, and the best curves of the two were fitted respectively by using the curve fitting method. The morphology of the femoral neck was outlined by two polynomials, and the femoral head was represented by an equation of a circle. By means of the proposed method, the results reveal that the inter-rater ICCs in X-ray and MRI were respectively 0.905 and 0.969, and the intra-rater ICCs in X-ray and MRI were respectively 0.892 and 0.840. The Bland-Altman plot shows that the values obtained by the proposed method and the conventional method were not consistent; nevertheless, the linear regression analysis indicated the two measurement results had a significant association (p < 0.001). This study provides a repeatable and agreed α angle measuring method, which contributes to identifying normal and abnormal femoral head-neck morphologies. The proposed numerical method would contribute to diagnose early FAI.

Automated femoral version estimation without the distal femur

Femoral version impacts the long-term functioning of the femoroacetabular joint. Accurate measurements of version are thus required for success in total hip arthroplasties and hip reconstructive surgeries. These are impossible to obtain without visualization of the distal femur, which is often unavailable preoperatively as the majority of imaging scans are isolated to the pelvis and proximal femur. We developed an automated algorithm for identifying the major landmarks of the femur. These landmarks were then used to identify proximal axes and create a statistical shape model of the proximal femur across 144 asymptomatic femora. With six proximal axes selected, and 200 parameters (distances and angles between points) from the shape model measured, the best-fitting linear correlation was found. The difference between true version and version predicted by this model was 0.00 ± 5.13° with a maximum overestimation and underestimation of 11.80 and 15.35°, respectively. The mean absolute difference was 4.14°. This model and its prediction of femoral version are a substantial improvement over pre-operative 2D or intra-operative visual estimation measures. © 2018 Orthopaedic Research Society. Published by Wiley Periodicals, Inc. J Orthop Res 36:3161-3168, 2018.

Predicting the optimal entry point for femoral antegrade nailing using a new measurement approach

PURPOSE

To establish a new reliable approach for measuring proximal femoral anatomical parameters and determining the optimal entry point of the antegrade intramedullary (IM) nailing.

METHODS

A new method for measuring the proximal femoral anatomy and locating the optimal entry point for the antegrade nailing was developed using Mimics and 3-Matic softwares (Materialise, Haasrode, Belgium). After verifying the reliability of the measurement method using 15 pairs of the femoral models by the intraclass correlation coefficient, the anatomical parameters of 200 Chinese femurs were measured, and statistical analyses were performed to compare the proximal femoral anatomical parameters between different genders or lateralities and determine the most relevant factors of the optimal entry point.

RESULTS

Reliability study showed that both intraobserver reliability and interobserver reliability of the current measurement approach were excellent. After independent samples [Formula: see text]-test, the proximal femoral anatomical parameters were shown significant difference between genders. Stepwise regression statistical analyses showed that the most relevant factors of the distances between the optimal entry point and the femoral head centre, the femoral neck axis and the tip of the greater trochanter were the 3D femoral neck-shaft angle (Pearson's [Formula: see text]; the model's [Formula: see text]), the femoral radius (Pearson's [Formula: see text]; the model's [Formula: see text]) and the femoral length (Pearson's r = 0.316; the model's [Formula: see text]), respectively.

CONCLUSIONS

The current study provided a new and reliable measurement approach to evaluating the anatomical morphology of the proximal femur and revealed the most influential factors on the locations of the simulated optimal entry point for the proximal femoral antegrade IM nailing. Furthermore, this study was useful for establishing methodological basis for future researches and developments of the custom-made IM nailing and affiliated surgical instruments.

Can femoral rotation be localized and quantified using standard CT measures?

BACKGROUND

The terms "femoral anteversion" and "femoral torsion" have often been used interchangeably in the orthopaedic literature, yet they represent distinct anatomical entities. Anteversion refers to anterior tilt of the femoral neck, whereas torsion describes rotation of the femoral shaft. Together, these and other transverse plane differences describe what may be considered rotational deformities of the femur. Assessment of femoral rotation is now routinely measured by multiple axial CT methods. The most widely used radiographic technique (in which only two CT-derived axes are made, one through the femoral neck and one at the distal femoral condyles) may not accurately quantify proximal femoral anatomy nor allow identification of the anatomic locus of rotation.

QUESTIONS/PURPOSES

(1) What CT methodology (a two-axis CT-derived technique, a three-axis technique adding an intertrochanteric axis--the "Kim method," or a volumetric three-dimensional reconstruction of the proximal femur) most accurately quantifies transverse plane femoral morphology; (2) localizes those deformities; and (3) is most reproducible across different observers?

METHODS

We constructed a high-definition femoral sawbones model in which osteotomies were performed at either the intertrochanteric region or femoral shaft. Transverse plane deformity was randomly introduced and CT-derived rotational profiles were constructed using three different CT methods. Accuracy and consistency of measurements of femoral rotation were calculated using p values and Fisher's exact test and intraclass correlation coefficients (ICCs).

RESULTS

All three CT methodologies accurately quantified overall transverse plane rotation (mean differences 0.69° ± 3.88°, 0.69° ± 3.88°, and -1.09° ± 4.44° for the two-plane, Kim, and volumetric methods, respectively). However, use of a single neck and single distal femoral axis does not reliably identify the anatomic locus of rotation, whereas the Kim and volumetric methods do (p < 0.0001). All three methods were highly reproducible between observers (ICCs of 0.9569, 0.9569, and 0.9359 for the traditional two-plane, Kim, and volumetric methods, respectively).

CONCLUSIONS

Only the Kim and volumetric methods can identify the anatomic location of transverse plane rotation and we recommend using one of the two techniques. Accurate anatomic localization of transverse plane rotation enables using precise anatomic terminology ("femoral torsion" versus "femoral [ante]version").

CLINICAL RELEVANCE

Current descriptions and treatment of femoral rotational deformities do not discriminate the location of rotation. The transverse plane femoral rotation requires a precise definition based on its anatomic location to maintain consistent communication between clinicians, because version of the neck and torsion of the shaft may have different treatment.

A three-dimensional measurement approach for the morphology of the femoral head

The hip joint is one of the most frequent sites of osteoarthritis. Advances in diagnosis and clinical treatment have progressed dramatically in the last few decades; however, there are limitations associated with the lack of reliable measures for quantifying hip joint morphology. Current diagnostic measures of the hip are performed with pre-determined measures, typically lengths and angles, on 2D radiographic planes. The current measurement techniques do not utilize the inherent 3D nature of CT and MR imaging and do not necessarily quantify the relevant clinical pathologies. A valid and reliable measurement modality that measures the surface geometry of the femoral head is necessary for early diagnosis and treatment of hip disease. The purpose of this study was to establish a method to quantify femoral head morphology using a three-dimensional model. A novel measurement approach was applied to 45 cadaveric femurs (23 right; 22 left; nine female, 17 male) and their digitally reconstructed 3D CT models. The mean difference between the cadaveric and digital measures was -2.04 mm with 95% confidence limits (CI) of 13.67 mm and -17.75 mm, respectively. The digital measurement approach was found to have excellent intraobserver reliability (ICC = 0.99, CI 0.98-0.99) and interobserver reliability (ICC = 0.98, CI 0.93-0.99). This valid and reliable novel digital measurement approach enables quantification of the 3D surface geometry of the femoral head and is able to measure individual variations and potentially detect abnormalities. This method may be used to assist future studies to establish valid diagnostic measurements for femoral head and head-neck junction pathologies.

Temporal trends in femoral diaphyseal torsional asymmetry among the Arikara associated with postural behavior

Average femoral torsion has been reported to differ among populations, and several studies have observed a relatively high prevalence of femoral anteversion asymmetry in Native Americans, especially females. This study investigates sexual dimorphism and temporal trends in femoral torsional asymmetry among the Arikara from the seventeenth to the early nineteenth century. To establish if there are population differences, femoral torsion was first measured using a direct method on a diverse comparative sample of Native Americans from the Southwest, Midwest, and Great Plains as well as American Whites and Blacks. To examine temporal trends among the Arikara, femoral torsion was examined using the orientation of the maximum bending rigidity at subtrochanteric in 154 females and 164 males from three temporal variants of the Arikara Coalescent tradition. There is significant sexual dimorphism in femoral torsional directional and absolute asymmetry among most Native American samples, but not among American Whites and Blacks. Among the Arikara there is significant sexual dimorphism in femoral torsional asymmetry in all three temporal variants, and asymmetry in femoral torsional asymmetry increased significantly from the protohistoric to the early historic period among females. The increased femoral torsional asymmetry is likely associated with a common side-sitting posture observed in historic photographs of Great Plains females. Historic Arikara females may have habitually sat in this compulsory position for extended periods while conducting domestic chores. The dramatic change from the protohistoric to historic period suggests a cultural change in sitting posture among females that was widespread across the Northern Plains.

Femoral neck-shaft angle in humans: variation relating to climate, clothing, lifestyle, sex, age and side

The femoral neck-shaft angle (NSA) varies among modern humans but measurement problems and sampling limitations have precluded the identification of factors contributing to its variation at the population level. Potential sources of variation include sex, age, side (left or right), regional differences in body shape due to climatic adaptation, and the effects of habitual activity patterns (e.g. mobile and sedentary lifestyles and foraging, agricultural, and urban economies). In this study we addressed these issues, using consistent methods to assemble a global NSA database comprising over 8000 femora representing 100 human groups. Results from the analyses show an average NSA for modern humans of 127° (markedly lower than the accepted value of 135°); there is no sex difference, no age-related change in adults, but possibly a small lateral difference which could be due to right leg dominance. Climatic trends consistent with principles based on Bergmann's rule are evident at the global and continental levels, with the NSA varying in relation to other body shape indices: median NSA, for instance, is higher in warmer regions, notably in the Pacific (130°), whereas lower values (associated with a more stocky body build) are found in regions where ancestral populations were exposed to colder conditions, in Europe (126°) and the Americas (125°). There is a modest trend towards increasing NSA with the economic transitions from forager to agricultural and urban lifestyles and, to a lesser extent, from a mobile to a sedentary existence. However, the main trend associated with these transitions is a progressive narrowing in the range of variation in the NSA, which may be attributable to thermal insulation provided by improved cultural buffering from climate, particularly clothing.