Impact of environmental factors on spider silk properties

Spider orb webs have evolved to stop flying prey, fast and slow alike. One of the main web elements dissipating impact energy is the radial fibers, or major ampullate silks, which possess a toughness surpassing most man-made materials. Orb webs are extended phenotypes, and as such their architectural elements, including major ampullate silks, have been selected to optimize prey capture under the respective environmental conditions. In this study, we investigated the correlation of three landscape scales and three microhabitat characteristics with intrinsic silk properties (elastic modulus, yield stress, tensile strength, extensibility, and toughness) to understand underlying ecological patterns. For this purpose, we collected and mechanically tested major ampullate silks from 50 spider species inhabiting large altitudinal and climatic gradients in Colombia. Using regression analysis and model selection, we investigated the environmental drivers of inter- and intra-specific patterns of major ampullate silk properties, taking into account phylogenetic relatedness based on newly sequenced mitochondrial genomes. We found that the total amount of energy absorbed, i.e., toughness and tensile strength, is higher for fibers from species inhabiting regions where heavy rainfall is common. Interestingly, we observe the same general trend between individuals of the same species, stressing the importance of this environmental driver. We also observe a phylogenetic conservation in the relation of environmental variables with silk tensile strength and yield stress. In conclusion, the increase in major ampullate silk tensile strength and toughness may reflect an adaptation to prevent frequent rain damage to orb webs and the associated energetic loss.

Influence of experimental methods on the mechanical properties of silk fibers: A systematic literature review and future road map

Spider silk fibers are of scientific and industrial interest because of their extraordinary mechanical properties. These properties are normally determined by tensile tests, but the values obtained are dependent on the morphology of the fibers, the test conditions, and the methods by which stress and strain are calculated. Because of this, results from many studies are not directly comparable, which has led to widespread misconceptions in the field. Here, we critically review most of the reports from the past 50 years on spider silk mechanical performance and use artificial spider silk and native silks as models to highlight the effect that different experimental setups have on the fibers' mechanical properties. The results clearly illustrate the importance of carefully evaluating the tensile test methods when comparing the results from different studies. Finally, we suggest a protocol for how to perform tensile tests on silk and biobased fibers.

Influence of web traits, height, and daily periods of exposition on prey captured by orb-weaver spiders

Orb-webs show diversity in several traits, including silk types, architecture, physical properties, locale, and period of exposition. The investigation of how they determine the identity of intercepted prey is important to functional ecology and to the evaluation of trophic niche partitioning within communities. However, the influence of several of these variables on the composition of intercepted insects remains to be determined. In this study, we evaluated the effects of web architectural traits, height, and daily periods of exposition on the interception of different insects in terms of sizes, masses, and taxa. We conducted observations of prey intercepted by the orb webs of 16 sympatric spider species and artificial webs. We found that all orb webs mainly intercepted small and light insects, sharing the most abundant insect families found in the study area. However, spiders that show nocturnal activity, more radii in their webs, large and high webs captured heavier insects. Other orb-web traits, such as the density of capture threads did not influence the kind of intercepted insects. We discuss why some variables affected prey interceptions in terms of mass. Finally, we discuss the implications of these influential variables to functional ecology, niche differentiation, and how behavioral assessments can complete this investigation in future studies.

Beyond spider personality: The relationships between behavioral, physiological, and environmental factors

Spiders are useful models for testing different hypotheses and methodologies relating to animal personality and behavioral syndromes because they show a range of behavioral types and unique physiological traits (e.g., silk and venom) that are not observed in many other animals. These characteristics allow for a unique understanding of how physiology, behavioral plasticity, and personality interact across different contexts to affect spider's individual fitness and survival. However, the relative effect of extrinsic factors on physiological traits (silk, venom, and neurohormones) that play an important role in spider survival, and which may impact personality, has received less attention. The goal of this review is to explore how the environment, experience, ontogeny, and physiology interact to affect spider personality types across different contexts. We highlight physiological traits, such as neurohormones, and unique spider biochemical weapons, namely silks and venoms, to explore how the use of these traits might, or might not, be constrained or limited by particular behavioral types. We argue that, to develop a comprehensive understanding of the flexibility and persistence of specific behavioral types in spiders, it is necessary to incorporate these underlying mechanisms into a synthesized whole, alongside other extrinsic and intrinsic factors.

A comparison of morphology and web geometry between hypogean and epigean species of Metellina orb spiders (family Tetragnathidae)

Studies on the behaviour of subterranean animals are rare, mainly due to the problems with collecting data in these inaccessible habitats. Web-building cave spiders, however, leave a semi-permanent record of their foraging behaviour, which can relatively easily be recorded. In this study, we compare size, leg lengths and web characteristics between hypogean populations of Metellina merianae with its close wood-inhabiting relative M. mengei. We confirm previous observations that M. merianae does not show any obvious morphological and behavioural adaptions to a subterranean life-style, although individuals of the cave species were significantly larger and had webs with relatively fewer radii and capture spiral turns than M. mengei. We were, however, not able to determine if these findings indicate a transition towards behavioural adaptation to caves or if they are a result of behavioural flexibility in response to the different humidity and temperature between caves and woodland. Finally, we did not find any effect of cave characteristics on either the number of radii or the area of the M. merianae web.

A comparison of morphology and web geometry between hypogean and epigean species of Metellina orb spiders (family Tetragnathidae)

Studies on the behaviour of subterranean animals are rare, mainly due to the problems with collecting data in these inaccessible habitats. Web-building cave spiders, however, leave a semi-permanent record of their foraging behaviour, which can relatively easily be recorded. In this study, we compare size, leg lengths and web characteristics between hypogean populations of Metellina merianae with its close wood-inhabiting relative M. mengei. We confirm previous observations that M. merianae does not show any obvious morphological and behavioural adaptions to a subterranean life-style, although individuals of the cave species were significantly larger and had webs with relatively fewer radii and capture spiral turns than M. mengei. We were, however, not able to determine if these findings indicate a transition towards behavioural adaptation to caves or if they are a result of behavioural flexibility in response to the different humidity and temperature between caves and woodland. Finally, we did not find any effect of cave characteristics on either the number of radii or the area of the M. merianae web.

Design principles of biologically fabricated avian nests

Materials and construction methods of nests vary between bird species and at present, very little is known about the relationships between architecture and function in these structures. This study combines computational and experimental techniques to study the structural biology of nests fabricated by the edible nest swiftlet Aerodramus fuciphagus on vertical rock walls using threaded saliva. Utilizing its own saliva as a construction material allows the swiftlets full control over the structural features at a very high resolution in a process similar to additive manufacturing. It was hypothesized that the mechanical properties would vary between the structural regions of the nest (i.e. anchoring to the wall, center of the cup, and rim) mainly by means of architecture to offer structural support and bear the natural loads of birds and eggs. We generated numerical models of swiftlet nests from μCT scans based on collected swiftlet nests, which we loaded with a force of birds and eggs. This was done in order to study and assess the stress distribution that characterizes the specific nest's architecture, evaluate its strength and weak points if any, as well as to understand the rationale and benefits that underlie this natural structure. We show that macro- and micro-scale structural patterns are identical in all nests, suggesting that their construction is governed by specific design principles. The nests' response to applied loads of birds and eggs in finite element simulations suggests a mechanical overdesign strategy, which ensures the stresses experienced by its components in any loading scenario are actively minimized to be significantly smaller than the tensile fracture strength of the nests' material. These findings highlight mechanical overdesign as a biological strategy for resilient, single-material constructions designed to protect eggs and hatchlings.

Age variation in the body coloration of the orb-weaver spider Alpaida tuonabo and its implications on foraging

Spiders show a repertoire of strategies to increase their foraging success. In particular, some orb-weaver spiders use attractive body colorations to lure prey. Interestingly, coloration varies with age in many species, which may result in ontogenetic variation of foraging success. By using field observations, laboratory experiments and spectrophotometric analysis, we investigated whether pale juveniles and bright adults of the orb-weaver Alpaida tuonabo use different foraging strategies due to ontogenetic variation in coloration. Field observations revealed that foraging success of juveniles and adults was influenced by web properties. However, foraging success increased with body size only in adults, supporting the idea that larger individuals produce a stronger visual signal for prey. The attractiveness of the adult coloration for prey was confirmed in the laboratory with frame-web-choice experiments, in which webs bearing a spider intercepted more bees than empty webs. Our spectrophotometric analysis suggests that the yellow coloration may produce the deceiving signal for prey. Moreover, we identified potential alternative foraging strategies: cryptic juveniles at higher heights and 'attractive' adults at lower heights. This study reveals how ontogenetic colour variation may favour the use of alternative foraging strategies in orb-weaver spiders and reduces intraspecific competition.

Physicochemical Property Variation in Spider Silk: Ecology, Evolution, and Synthetic Production

The unique combination of great stiffness, strength, and extensibility makes spider major ampullate (MA) silk desirable for various biomimetic and synthetic applications. Intensive research on the genetics, biochemistry, and biomechanics of this material has facilitated a thorough understanding of its properties at various levels. Nevertheless, methods such as cloning, recombination, and electrospinning have not successfully produced materials with properties as impressive as those of spider silk. It is nevertheless becoming clear that silk properties are a consequence of whole-organism interactions with the environment in addition to genetic expression, gland biochemistry, and spinning processes. Here we assimilate the research done and assess the techniques used to determine distinct forms of spider silk chemical and physical property variability. We suggest that more research should focus on testing hypotheses that explain spider silk property variations in ecological and evolutionary contexts.

The secondary frame in spider orb webs: the detail that makes the difference

Spider orb webs are multifunctional structures, the main function of which is to dissipate the kinetic energy of the impacting prey, while minimizing structural damage. There is no single explanation for their remarkable strength and ductility. However, it is clear that topology is decisive in the structural performance upon impact, and the arrangement of the different silk threads in the web must also exert an effect. The aim of this study is to show how a slight variation in the geometry markedly affects the prey-capture ability of spider orb webs. The study is focused on the secondary frame, a thread interposed between radial and primary frame strands, the importance of which has not been examined until now. The simulation of the impact performance of webs using different lengths of the secondary frame clarifies its structural role, which has proven to be decisive. Furthermore, the study explains why secondary frame threads of moderate length, as commonly encountered, enable the capture of prey with higher energy without a marked increase in the volume of silk used.

Composition and substrate-dependent strength of the silken attachment discs in spiders

Araneomorph spiders have evolved different silks with dissimilar material properties, serving different purposes. The two-compound pyriform secretion is used to glue silk threads to substrates or to other threads. It is applied in distinct patterns, called attachment discs. Although ubiquitously found in spider silk applications and hypothesized to be strong and versatile at low material consumption, the performance of attachment discs on different substrates remains unknown. Here, we analyse the detachment forces and fracture mechanics of the attachment discs spun by five different species on three different substrates, by pulling on the upstream part of the attached thread. Results show that although the adhesion of the pyriform glue is heavily affected by the substrate, even on Teflon it is frequently strong enough to hold the spider's weight. As plant surfaces are often difficult to wet, they are hypothesized to be the major driving force for evolution of the pyriform secretion.

Post-secretion processing influences spider silk performance

Phenotypic variation facilitates adaptations to novel environments. Silk is an example of a highly variable biomaterial. The two-spidroin (MaSp) model suggests that spider major ampullate (MA) silk is composed of two proteins-MaSp1 predominately contains alanine and glycine and forms strength enhancing β-sheet crystals, while MaSp2 contains proline and forms elastic spirals. Nonetheless, mechanical properties can vary in spider silks without congruent amino acid compositional changes. We predicted that post-secretion processing causes variation in the mechanical performance of wild MA silk independent of protein composition or spinning speed across 10 species of spider. We used supercontraction to remove post-secretion effects and compared the mechanics of silk in this 'ground state' with wild native silks. Native silk mechanics varied less among species compared with 'ground state' silks. Variability in the mechanics of 'ground state' silks was associated with proline composition. However, variability in native silks did not. We attribute interspecific similarities in the mechanical properties of native silks, regardless of amino acid compositions, to glandular processes altering molecular alignment of the proteins prior to extrusion. Such post-secretion processing may enable MA silk to maintain functionality across environments, facilitating its function as a component of an insect-catching web.

The mechanical properties of the non-sticky spiral in Nephila orb webs (Araneae, Nephilidae)

Detailed information on web geometry and the material properties of the various silks used elucidates the function of the web's different structures. In this study we investigated the non-sticky spiral in Nephila edulis webs, which in this species is not removed during web-building. This permanent non-sticky spiral shows several modifications compared to other, i.e. temporary non-sticky spirals; it is zigzag shaped and wrapped around the radial thread at the elongated junctions. Material properties of silk in the non-sticky spiral and other scaffolding structures (i.e. radii, frame and anchor threads) were comparable. However, the fibre diameters differed with the non-sticky spiral threads being significantly smaller. We used the measured data in a finite element (FE) model of the non-sticky spiral in a segment of the web. The FE analysis suggested that the observed Zigzag index resulted from the application of very high pre-stresses to the outer turns of the non-sticky spiral. However, final pre-stresses in the non-sticky spiral after reorganisation were down to 300 MPa or 1.5-2 times the stress in the radii, which is probably closer to the stress applied by the spider during web-building.