Nutritional and microbial profiles of ripened plant-based cheese analogs collected from the European market

Plant-based cheese analogs have emerged as a novel global market trend driven by sustainability concerns for our planet. This study examines eleven soft ripened plant-based cheese analogs produced in Europe, primarily with bloomy rinds and cashew nuts as the main ingredient. First, we focused on exploring the macronutrients and salt content stated on the labels, as well a detailed fatty acid analysis of the samples. Compared to dairy cheeses, plant-based cheeses share similarities in lipid content, but their fatty acid profiles diverge significantly, with higher ratio of mono- and polyunsaturated fatty acids such as oleic and linoleic acids. We also investigated the microbiota of these analog products, employing a culture-dependent and -independent approaches. We identified a variety of microorganisms in the plant-based cheeses, with Lactococcus lactis and Leuconostoc mesenteroides being the dominant bacterial species, and Geotrichum candidum and Penicillium camemberti the dominant fungal species. Most of the species characterized are similar to those present in dairy cheeses, suggesting that they have been inoculated as culture starters to contribute to the sensorial acceptance of plant-based cheeses. However, we also identify several species that are possibly intrinsic to plant matrices or originate from the production environment, such as Pediococcus pentosaceus and Enterococcus spp. This coexistence of typical dairy-associated organisms with plant associated species highlights the potential microbial dynamics inherent in the production of plant-based cheese. These findings will contribute to a better understanding of plant-based cheese alternatives, enable the development of sustainable products, and pave the way for future research exploring the use of plant-based substrates in the production of cheese analogues.

Lactose-6-phosphate as an alternative to disodium phosphate in the production of processed cheese food

Processed cheese food (PCF) is a dairy product prepared by blending dairy ingredients with nondairy ingredients and heating the blend with agitation to produce a homogeneous product with an extended shelf life. Emulsifying salts (ES), such as disodium phosphate (DSP) and trisodium citrate, have a critical effect on the emulsification characteristics of casein by sequestering the calcium from the calcium-paracaseinate phosphate complex in natural cheese. Lactose-6-phosphate (LP) is an organic compound produced from lactose that has the potential to function as ES. Lactose-6-phosphate is not approved for use as a substitute for ES in the large-scale production of PC. The objective of this study was to produce PCF with LP instead of DSP. Lactose-6-phosphate was prepared by mixing 1 mol of α-lactose with 0.5 mol of sodium cyclo-triphosphate. The pH of recombined solutions was adjusted using sodium hydroxide to get a pH of 12 to obtain 60.74% LP. The solution was stirred for 3 d at room temperature and then concentrated to 52% total solids (TS). The ingredients in the PCF formulations were Cheddar cheese, butter, water, milk permeate powder, and LP (at a ratio of 2.0, 2.4, 2.8, 3.2, 4.0, 5.0, and 6.0%) were formulated to contain 17.0% protein, 25.0% fat, 44.0% moisture, and 2.0% salt. Processed cheese food made with 2.0% DSP was also produced as a control. The PCF was prepared by mixing all ingredients in a Kitchen Aid stand mixer to make a homogeneous paste. A 25-g sample of the mixture was cooked in the rapid visco analyzer (Perten RVA 4500, Macquarie Park, Australia) for 3 min at 95°C at 1,000 rpm for the first 2 min and 160 rpm for the last minute. The PCF was then transferred into molds and refrigerated till further analyses. The PCF was analyzed for moisture, pH, end apparent cooked viscosity, hardness, melted diameter, and melting temperature. The experiment was repeated 3 times using different batches of LP. The moisture of PCF ranged from 42.3% to 44.0% with a pH of 5.6 to 5.8. The end apparent cooked viscosity increased from 818.0 to 2,060.0 cP as the level of LP raised from 0.63% to 1.90%, whereas it was 660.0 cP in control. The hardness of PCF made with LP elevated from 61.9 to 110.1g as the level of LP increased; however, it was 85.6 g in control. The melted diameter decreased from 43 mm in control to 29 mm in 1.90% LP, while the melting temperature of PCF increased from 37.7°C in control to 59.0°C in 1.90% LP. We conclude that LP can be used as a substitute for DSP in PCF manufacture and has more capacity than DSP.

Manufacture of Low-Na White Soft Brined Cheese: Effect of NaCl Substitution with a Combination of Na-K Salts on Proximate Composition, Mineral Content, Microstructure, and Sensory Acceptance

All over the world, especially in Western societies, table salt intake that is inordinately higher than the acceptable level has been observed. An excess of Na in the human diet, mostly from processed foods, is becoming the "number one killer", leading to increased blood pressure. Therefore, the food industry is faced with a need to reduce Na in human nutrition in an effort to raise public health protection to a higher level. In this study, a commercially available combination of Na/K salts (COMB) at different concentrations was used as a NaCl substitute in the production of a modified, healthier, Na-reduced cheese. Samples of the modified low-Na white soft-brined cheese (WSBC) were produced by adding four different concentrations of COMB to production lots PL-1 to PL-4, and the control (CON) samples were prepared by salting with the usual, non-reduced concentration of NaCl. The effects of NaCl replacement on the physical-chemical parameters, major- and micro-elements, and microstructural and sensory properties of the WSBC were investigated. The obtained results indicated that there was no significant influence on the ash content, pH, and aw. The Na and K levels differed among treatments (p < 0.001). The lowest Na level in this study was recorded in PL-4 (only COMB was added) and was 334.80 ± 24.60 mg/100 g. According to the Na content, WSBC PL4 can be labeled with the nutrient claim "reduced amount of Na". A significant difference (p < 0.05) was noticed in overall acceptance between the CON and PL-4, with no statistically significant difference found amongst other WSBC production lots. The replacement of NaCl resulted in a slightly greater firmness of the WSBC. The results confirm the possibility of producing low-Na WSBC when optimal amounts of a suitable mineral salt are used as a substitute for NaCl, thus reducing the risk of high Na intake in the human body through the consumption of evaluated cheese.

Coupling dairy wastewaters for nutritional balancing and water recycling: sustainable heterologous 2-phenylethanol production by engineered cyanobacteria

Microalgae biotechnology is hampered by the high production costs and the massive usage of water during large-volume cultivations. These drawbacks can be softened by the production of high-value compounds and by adopting metabolic engineering strategies to improve their performances and productivity. Today, the most sustainable approach is the exploitation of industrial wastewaters for microalgae cultivation, which couples valuable biomass production with water resource recovery. Among the food processing sectors, the dairy industry generates the largest volume of wastewaters through the manufacturing process. These effluents are typically rich in dissolved organic matter and nutrients, which make it a challenging and expensive waste stream for companies to manage. Nevertheless, these rich wastewaters represent an appealing resource for microalgal biotechnology. In this study, we propose a sustainable approach for high-value compound production from dairy wastewaters through cyanobacteria. This strategy is based on a metabolically engineered strain of the model cyanobacterium Synechococcus elongatus PCC 7942 (already published elsewhere) for 2-phenylethanol (2-PE). 2-PE is a high-value aromatic compound that is widely employed as a fragrance in the food and cosmetics industry thanks to its pleasant floral scent. First, we qualitatively assessed the impact of four dairy effluents on cyanobacterial growth to identify the most promising substrates. Both tank-washing water and the liquid effluent of exhausted sludge resulted as suitable nutrient sources. Thus, we created an ideal buffer system by combining the two wastewaters while simultaneously providing balanced nutrition and completely avoiding the need for fresh water. The combination of 75% liquid effluent of exhausted sludge and 25% tank-washing water with a fine-tuning ammonium supplementation yielded 180 mg L-1 of 2-PE and a biomass concentration of 0.6 gDW L-1 within 10 days. The mixture of 90% exhausted sludge and 10% washing water produced the highest yield of 2-PE (205 mg L-1) and biomass accumulation (0.7 gDW L-1), although in 16 days. Through these treatments, the phosphates were completely consumed, and nitrogen was removed in a range of 74%-77%. Overall, our approach significantly valorized water recycling and the exploitation of valuable wastewaters to circularly produce marketable compounds via microalgae biotechnology, laying a promising groundwork for subsequent implementation and scale-up.

The microbial and metabolite composition of Gouda cheese made from pasteurized milk is determined by the processing chain

Gouda cheeses of different production batches and ripening times often differ in metabolite composition, which may be due to the starter culture mixture applied or the growth of non-starter lactic acid bacteria (NSLAB) upon maturation. Therefore, a single Gouda cheese production batch was systematically investigated from the thermized milk to the mature cheeses, ripened for up to 100 weeks, to identify the main bacterial species and metabolites and their dynamics during the whole production and ripening. As this seemed to be starter culture strain- and NSLAB-dependent, it requested a detailed, longitudinal, and quantitative investigation. Hereto, microbial colony enumeration, high-throughput full-length 16S rRNA gene sequencing, and a metabolomic approach were combined. Culture-dependently, Lactococcus lactis was the most abundant species from its addition as part of the starter culture up to the first two months of cheese ripening. Afterward, the NSLAB Lacticaseibacillus paracasei became the main species during ripening. The milk was a possible inoculation source for the latter species, despite pasteurization. Culture-independently, the starter LAB Lactococcus cremoris and Lc. lactis were the most abundant species in the cheese core throughout the whole fermentation and ripening phases up to 100 weeks. The cheese rind from 40 until 100 weeks of ripening was characterized by a high relative abundance of the NSLAB Tetragenococcus halophilus and Loigolactobacillus rennini, which both came from the brine. These species were linked with the production of the biogenic amines cadaverine and putrescine. The most abundant volatile organic compound was acetoin, an indicator of citrate and lactose fermentation during the production day, whereas the concentrations of free amino acids were an indicator of the ripening time.

Modeling and Optimization of Herb-Fortified Fresh Kombucha Cheese: An Artificial Neural Network Approach for Enhancing Quality Characteristics

In this study, an Artificial Neural Network (ANN) model is used to solve the complex task of producing fresh cheese with the desired quality parameters. The study focuses on kombucha fresh cheese samples fortified with ground wild thyme, supercritical fluid extract of wild thyme, ground sage and supercritical fluid extract of sage and optimizes the parameters of chemical composition, antioxidant potential and microbiological profile. The ANN models demonstrate robust generalization capabilities and accurately predict the observed results based on the input parameters. The optimal neural network model (MLP 6-10-16) with 10 neurons provides high r2 values (0.993 for training, 0.992 for testing, and 0.992 for validation cycles). The ANN model identified the optimal sample, a supercritical fluid extract of sage, on the 20th day of storage, showcasing specific favorable process parameters. These parameters encompass dry matter, fat, ash, proteins, water activity, pH, antioxidant potential (TP, DPPH, ABTS, FRAP), and microbiological profile. These findings offer valuable insights into producing fresh cheese efficiently with the desired quality attributes. Moreover, they highlight the effectiveness of the ANN model in optimizing diverse parameters for enhanced product development in the dairy industry.

Evaluation of autochthonous Lactococcus lactis subsp. lactis strain as a candidate starter culture in white-brined cheese

Lactococcus lactis subsp. lactis NCCB100539 isolated from an artisanal raw ewe's milk cheese was evaluated as a potential starter culture in white-brined cheese. As a safety criteria, the cytotoxicity of the viable and heat-killed cells and CFE of this strain were determined on Caco-2 cell line by MTT assay. The antibiotic sensitivity of the strain to nine different antibiotics was also investigated. Cheeses produced using this strain were compared with control cheese in terms of physicochemical, microbiological, sensory properties as well as the peptide and volatile profiles during the 90-days of ripening period. Experimental cheeses had more extensive proteolysis as well as higher sensory scores. Incorporated L. lactis also led to an improvement in the microbial cheese quality. Neither living nor the dead cells and CFE of the strain showed cytotoxicity on Caco-2 cells. Therefore, L. lactis NCCB100539 strain could be a good starter candidate for the industrial white-brined cheeses.

Graphical abstract

Supplementary Information

The online version contains supplementary material available at 10.1007/s10068-023-01332-y.

Microbiology of fermented soy foods in Asia: Can we learn lessons for production of plant cheese analogues?

The food industry is facing the challenge of creating innovative, nutritious, and flavored plant-based products, due to consumer's increasing demand for the health and environmental sustainability. Fermentation as a unique and effective tool plays an important role in the innovation of food products. Traditional fermented soy foods are popular in many Asian and African countries as nutritious, digestible and flavorful daily staples or condiments. They are produced by specific microorganisms with the unique fermentation process in which microorganisms convert the ingredients of whole soybean or soybean curd to flavorful and functional molecules. This review provides an overview on traditional fermented food produced from soy, including douchi, natto, tempeh, and sufu as well as stinky tofu, including the background of these products, the manufacturing process, and the microbial diversity involved in fermentation procedures as well as flavor volatiles that were identified in the final products. The contribution of microbes to the quality of these five fermented soy foods is discussed, with the comparison to the role of cheese ripening microorganisms in cheese flavor formation. This communication aims to summarize the microbiology of fermented soy foods in Asia, evoking innovative ideas for the development of new plant-based fermented foods especially plant-based cheese analogues.

Evaluation of a New Bulk Packaging Container for the Ripening of Feta Cheese

In the present study, the quality characteristics of Feta cheese were investigated as a function of the packaging container (a stainless-steel tank (SST), a wooden barrel (WB), and a tin can (TC)) and ripening time. The results showed that the Feta cheese's pH, moisture, and lactose decreased, while fat, protein, and salt increased (p < 0.05) during ripening with SST and WB, showing similar behaviors versus that of the TC container. For the proteolysis indices, % TN,% WSN, 12% TCA, and 5% PTA showed the highest values (p < 0.05) for cheeses packaged in WB, followed by those in SST and TC, with all increasing (p < 0.05) during ripening. The most abundant odor-active volatiles were free fatty acids, alcohols, and esters following the order SST > WB > TC on day 60. On day 60, the cheeses packaged in SST and WB showed higher (p < 0.05) hardness and fracturability values, as well as aroma scores, compared to those in TC, with both parameter values increasing with the ripening time.

Metagenomics reveals the habitat specificity of biosynthetic potential of secondary metabolites in global food fermentations

BACKGROUND

Fermented foods are considered to be beneficial for human health. Secondary metabolites determined by biosynthetic gene clusters (BGCs) are precious bioactive compounds with various biological activities. However, the diversity and distribution of the biosynthetic potential of secondary metabolites in global food fermentations remain largely unknown. In this study, we performed a large-scale and comprehensive investigation for the BGCs in global food fermentations by metagenomics analysis.

RESULTS

We recovered 653 bacterial metagenome-assembled genomes (MAGs) from 367 metagenomic sequencing datasets covering 15 general food fermentation types worldwide. In total, 2334 secondary metabolite BGCs, including 1003 novel BGCs, were identified in these MAGs. Bacillaceae, Streptococcaceae, Streptomycetaceae, Brevibacteriaceae and Lactobacillaceae contained high abundances of novel BGCs (≥ 60 novel BGCs). Among 2334 BGCs, 1655 were habitat-specific, originating from habitat-specific species (80.54%) and habitat-specific genotypes within multi-habitat species (19.46%) in different food fermentation types. Biological activity analysis suggested that 183 BGC-producing secondary metabolites exhibited high probabilities of antibacterial activity (> 80%). These 183 BGCs were distributed across all 15 food fermentation types, and cheese fermentation contained the most BGC number.

CONCLUSIONS

This study demonstrates that food fermentation systems are an untapped reservoir of BGCs and bioactive secondary metabolites, and it provides novel insights into the potential human health benefits of fermented foods. Video Abstract.

Impact of Salting Techniques on the Physio-Chemical Characteristics, Sensory Properties, and Volatile Organic Compounds of Ras Cheese

Ras cheese is the main Egyptian hard cheese that is well-known worldwide. Herein, we investigated how different salting techniques affect the physio-chemical properties, sensory properties, and volatile compounds of Ras cheese over a six-month ripening period. Five Ras cheese treatments were made from pasteurized cow's milk using various salting techniques: traditional salting of Ras cheese, salting by applying all of the salt to the curd after the entire whey drainage, salting by applying all of the salt to the curd after half to two-thirds of the whey drainage, salting in a brine solution for 24 h without dry salting, and salting in a brine solution for 12 h and then dry salting. The obtained results by GC-MS recorded that thirty-eight volatile compounds were identified in Ras cheese treatments after six months of ripening, and the development of volatile compounds was affected by the salting technique as well as the ripening period of the cheeses, which played a major role in the type and concentration of volatile compounds. Results revealed that there are six esters, 15 fatty acids, five ketones, two aldehydes, four alcohols, and eight other compounds identified in most treatments. Some physio-chemical characteristics and sensory properties were found to have high correlations with the storage period, while some others have low correlations during the ripening period.

An assessment of the intact casein content in natural cheddar cheese to determine its suitability in processed cheeses with desired properties

As compared to age, intact casein in the natural cheddar cheese is a better index of selection for manufacturing processed cheese. In view of this, the present investigation was designed to establish relation between intact casein of the natural cheese with desirable properties of the processed cheese so that the most desirable intact casein in the natural cheddar cheese can be selected on the basis of required properties of the processed cheese. Processed cheese was prepared by using natural cheddar cheese of different intact casein content (ICC) and analysed for meltability, oiling off and hardness. Multiple linear regression was used for prediction of ICC using meltability, oiling off and hardness and it was observed that the all the independent variables significantly affected ICC. Adjusted R2 value of 0.952 and root mean square error of 1.04 suggested a good fit and validation of the developed equation.

Influence of salt concentration on microbial growth in Kashkaval cheese

The aim of the present study was to evaluate the influence of NaCl concentration on the microflora in Kashkaval cheese produced from cow’s milk. Three cheese samples were obtained - with low (0.7%), medium (1.5%), and standard (3.1%) content of NaCl. Microbiological analyses were performed on the 1st, 15th, 30th, and 45th d of cheese ripening. It was established that the NaCl content has a significant (p < 0.05) influence on the growth and activity of the microflora in studied samples. It has been observed that the total Lactic acid bacteria (LAB) increased up to 30 d during ripening, after which their concentration decreased. A higher LABs count of samples with 0.7% NaCl and 1.5% NaCl in comparison with those containing 3.1% NaCl was found. At the same time, the variations in the salt content do not have a significant (p > 0.05) impact on the growth of Psychrotrophic bacteria, while in samples with a low salt content, the growth of Yeast and Molds was more intense. The data obtained in the present study showed that the concentration of NaCl is important for the regulation of activity of microbiological processes during the ripening of the Kashkaval cheese samples.

Functional changes in Bleu d'Auvergne cheese during ripening

The authentic characteristics of the famous Bleu d'Auvergne cheese were studied. Many parameters were analysed during the ripening of cheeses. Migrations of Na and Ca ions, associated with a pH gradient, occurred between the rind and the core. At 34 days, this cheese had a high salt content (2.87 %), contributing to 23 % of the recommended sodium intake for adults, but significant calcium (6.14 g/kg) and vitamin B12 (1.14 µg/100 g) levels. Thus, a 40 g serving contributed to 25 % of the population reference intake for Ca and 11 % of the adequate intake for B12. Proteolysis, yeast and mould counts strongly increased. Lactococcus and Streptococcus were predominant and correlated with B2 and B6 levels. Bleu d'Auvergne was characterised by salty taste, blue odour and aroma. This cheese has a noticeable B vitamins concentration, but the level of salt should be reduced to meet the nutritional guidelines, possibly by implementing alternative salting methods.

The relationship between physicochemical and microbiological characteristics of Surk cheese

In this study, the relationship between the physicochemical and microbiological properties of the Surk cheese was investigated through the analysis of dry matter (D.M.), ash, protein, salt, acidity, pH and enumeration of the total mesophyll aerobic bacteria (TMAB), yeast-mold, presumptive lactobacilli and lactococci. Surk samples were obtained randomly from 36 different local dairy shops in Antakya province of Turkey. The average values of the dry matter, ash, protein, fat, and salt, acidity and pH analysis were 44.4%, 9.09%, 17.5%, 17.0%, 8.08%, 0.916% and 4.17, respectively. The average values for TMAB, yeast mold, presumptive lactobacilli and lactococci enumeration in the microbiological analysis were found to be 6.23, 4.09, 6.04, and 3.42 log cfu/g, respectively. Based on the statistical analysis, Surk samples were divided into 3 groups in terms of salt content (3-6, 6-9 and > 9%). Then, the physicochemical and microbiological properties of Surk samples were evaluated according to these groups. This study suggests that besides the different methods to produce Surk cheese as followed by the different manufacturers, the amount of salt added to Surk cheese affects its microbiological and physicochemical characteristics.

Utilization of salt-rich by-products from the dairy industry as feedstock for recombinant protein production by Debaryomyces hansenii

The dairy industry processes vast amounts of milk and generates high amounts of secondary by-products, which are still rich in nutrients (high Chemical Oxygen Demand (COD) and Biochemical Oxygen Demand (BOD) levels) but contain high concentrations of salt. The current European legislation only allows disposing of these effluents directly into the waterways with previous treatment, which is laborious and expensive. Therefore, as much as possible, these by-products are reutilized as animal feed material and, if not applicable, used as fertilizers adding phosphorus, potassium, nitrogen, and other nutrients to the soil. Finding biological alternatives to revalue dairy by-products is of crucial interest in order to improve the utilization of dry dairy matter and reduce the environmental impact of every litre of milk produced. Debaryomyces hansenii is a halotolerant non-conventional yeast with high potential for this purpose. It presents some beneficial traits - capacity to metabolize a variety of sugars, tolerance to high osmotic environments, resistance to extreme temperatures and pHs - that make this yeast a well-suited option to grow using complex feedstock, such as industrial waste, instead of the traditional commercial media. In this work, we study for the first time D. hansenii's ability to grow and produce a recombinant protein (YFP) from dairy saline whey by-products. Cultivations at different scales (1.5, 100 and 500 ml) were performed without neither sterilizing the medium nor using pure water. Our results conclude that D. hansenii is able to perform well and produce YFP in the aforementioned salty substrate. Interestingly, it is able to outcompete other microorganisms present in the waste without altering its cell performance or protein production capacity.

The Quality and Composition of Iranian Low-Salt UF-White Cheese

In cheese, the reduction of salt is still a challenging task, as sodium chloride exerts multiple and fundamental functions. Salt favors the drainage of the residual whey; enhances the taste and the aroma profile; regulates the texture, the final pH, and the water activity; and affects the microbial growth. Hence the impact of partial replacement of NaCl by KCl on the ripening characteristics of Iranian UF (ultrafiltration) cheese during storage was monitored. To produce low-salt cheese, different mixtures of UF white cheese were treated with NaCl : KCl ratios of (a) 3% NaCl (control), (b) 1.50% NaCl+1.50% KCl, (c) 1.00% NaCl+2.00% KCl, and (d) 0.75% NaCl+2.25% KCl by dry salting. ADV (acid degree value) results showed significant differences ( $P<0.05$ ) in all treatments after 15, 30, 40, and 50 days of ripening. No significant differences were observed in the GC (gas chromatography) results in the samples’ free fatty acid (FFA) profile except for C18 : 0 in all treatments. KCl did not affect the moisture, dry matter, fat, TN (total nitrogen)/dry matter, and WSN (water-soluble nitrogen) contents of cheeses considerably. The evaluation of force to fracture showed that there were significant differences ( $P<0.05$ ) between treatment (d) as a control cheese and treatments (b) and (c). Sensory evaluations showed as the concentration of KCl increased, the cheese gradually became less acceptable and treatments with higher potassium chloride content were crumblier and less firm. Results of the aroma evaluation of cheese samples showed that unlike acetaldehyde, ethanol, acetoin, and diacetyl amounts decreased significantly ( $P<0.05$ ) during the storage period. Results also indicated that a reduction of sodium by up to 50% did not significantly affect the quality and composition of Iranian low-salt UF-white cheese except for sensory evaluation, texture analysis, and aroma characteristics.

Probiotic potential of Tetragenococcus halophilus EFEL7002 isolated from Korean soy Meju

BACKGROUND

Probiotic starters can improve the flavor profile, texture, and health-promoting properties of fermented foods. Tetragenococcus halophilus is a halophilic lactic acid bacterium that is a candidate starter for high-salt fermented foods. However, the species is known to produce biogenic amines, which are associated with neurotoxicity. Here, we report a probiotic starter strain of T. halophilus, EFEL7002, that is suitable for use in high-salt fermentation.

RESULTS

EFEL7002 was isolated from Korean meju (fermented soybean) and identified as T. halophilus, with 99.85% similarity. The strain is safe for use in food as it is a non-hemolytic and non-biogenic amine producer. EFEL7002 is tolerant to gastrointestinal conditions and can adhere to Caco-2 cells. This strain showed antioxidant, anti-inflammatory, and protective effects against the human gut epithelial barrier. EFEL7002 grew well in media containing 0-18% NaCl showing maximum cell densities in 6% or 12% NaCl.

CONCLUSIONS

T. halophilus EFEL7002 can be used as a health-promoting probiotic starter culture for various salty fermented foods.

Effects of Grazing Season on Physico-Chemical Characteristics and Fatty Acids of Nutritional Interest of Caciocavallo Palermitano Cheese

The aim of this work was to evaluate, in the different production seasons of the year, the physico-chemical quality of an artisanal cheese traditionally obtained from autochthonous grazing cows, with particular reference to fatty acids (FA) of nutritional interest that play an important role in the risk or prevention of some human pathologies. For this purpose, cheeses were sampled in 11 farms, repeating the samplings in 3 different periods of the year (summer, autumn-winter, and spring) when the productive conditions of the pastures varied. The cheeses produced in the spring period, when cows ingest a greater amount of grazed forage, resulted in a more adequate composition of the main FA, which are recognized as having a health effect, such as α-linolenic, trans-vaccenic, rumenic, docosapentaenoic (DPA) and docosahexaenoic (DHA) acids. Branched-chain FA were found in greater quantities in spring cheeses, as well as in summer ones. The FA composition of cheeses produced in the different seasons was reflected in some nutritional indexes that also resulted as more suitable in cheeses obtained in the spring period. The positive effects induced on the FA profile of cheeses are presumably linked to the diet of autochthonous cows, which is mainly based on forage from natural pastures. Therefore, the results obtained confirm the benefits of grazing, which is able to guarantee the production of healthier cheeses for consumers.

Sodium Reduction by Partial and Total Replacement of NaCl with KCl in Serbian White Brined Cheese

Cheese has been listed as one of four priority food groups intended for salt reduction reformulation. The present study aimed to investigate the possibility of producing Serbian white brined cheese (Homoljski Sir) with half of NaCl, three quarters of NaCl and all NaCl replaced with KCl (Na50, Na25 and Na0, respectively). Basic composition, proteolysis and texture profile parameters were monitored during 60 days of ripening. At the end of ripening, an acceptance test was conducted by untrained consumers (N = 46). According to the cluster analysis based on hedonic scores, three clusters emerged: male consumers (47.8%), agreeable consumers (30.4%) and highly educated female consumers (21.8%). Both partial and a total salt replacement had no effect on the course of proteolytical changes, the texture and basic composition during ripening. Female consumers did not accept any level of salt substitution, while male consumers showed dislike only for the Na0 cheese. Almost 80% of all consumers liked moderately-to-very-much the Na25 cheese variant. It implies that it is worth considering the production of cheese with 50–75% of NaCl replaced with KCl. The addition of natural flavoring and clear labeling of the sodium reduction should accompany the salt replacement strategy.

Comparison of growth and survival of single strains of Lactococcus lactis and Lactococcus cremoris during Cheddar cheese manufacture

Traditionally, starter cultures for Cheddar cheese are combinations of Lactococcus lactis and Lactococcus cremoris. Our goal was to compare growth and survival of individual strains during cheesemaking, and after salting and pressing. Cultures used were 2 strains of L. lactis (SSM 7605, SSM 7436) and 2 strains of L. cremoris (SSM 7136, SSM 7661). A standardized Cheddar cheese make procedure was used that included a 38°C cook temperature and salting levels of 2.0, 2.4, 2.8, 3.2, and 3.6% from which were selected cheeses with salt-in-moisture levels of 3.5, 4.5, and 5.5%. Vats of cheese were made using each strain on its own as biological duplicates on different days. Starter culture numbers were enumerated by plate counting during cheesemaking and after 6 d storage at 6°C. Flow cytometry with fluorescent staining by SYBR Green and propidium iodide was used to determine the number of live and dead cells in cheese at the different salt levels. Differences in cheese make times were strain dependent rather than species dependent. Even with correction for average culture chain length, cheeses made using L. lactis strains contained ∼4 times (∼0.6 log) more bacterial cells than those made using L. cremoris strains. Growth of the strains used in this study was not influenced by the amount of salt added to the curd. The higher pH of cheeses with higher salting levels was attributed to those cheeses having a lower moisture content. Based on flow cytometry, ∼5% of the total starter culture cells in the cheese were dead after 6 d of storage. Another 3 to 19% of the cells were designated as being live, but semipermeable, with L. cremoris strains having the higher number of semipermeable cells.

Effect of abiotic factors and culture media on the growth of cheese-associated Nectriaceae species

Nectriaceae species have been described in various natural environments or as plant or human pathogens. Within this family, the Bisifusarium domesticum species is of particular interest for food mycologists as it is used for technological functions in various cheese productions. Moreover, it has only been isolated from the cheese environment so far and, until recently, was the only Nectriaceae species described in this food product. Recently, four novel cheese-associated Nectriaceae species have been described, including two associated to the Bisifusarium genus and two to a new genus, Longinectria gen. nov.. These observations raise questions concerning the potential adaptation of these species to the cheese environment. In this context, this study first focused on determining the impact of abiotic factors on the growth of isolates belonging to the five cheese-associated species (i.e. B. allantoides sp. nov., B. domesticum, B. penicilloides sp. nov., L. lagenoides gen. nov. sp. nov. and L. verticilliforme gen. nov. sp. nov.) but also included phylogenetically close species. To do so, fungal growth kinetics in liquid medium (Potato Dextrose Broth) were determined by laser nephelometry at different temperatures, pH and water activities using NaCl as a depressor. Growth modeling was then performed to estimate cardinal values for each abiotic factor. Secondly, fungal growth was also evaluated on Potato Dextrose Agar (synthetic medium), cheese agar (cheese-mimicking medium) and Raclette de Savoie cheese (actual cheese). Our results clearly highlighted physiological differences in growth characteristics between the studied cheese-associated Nectriaceae spp. and the "non-cheese" species which could suggest, for the former, an adaptation to this food matrix. Indeed, regarding the impact of the tested abiotic factors, statistical analyses confirmed this dichotomy, with for example the lowest optimal temperatures estimated for the cheese-associated species (T_opt 19.1-23.1 °C) while the other Bisifusarium species exhibited the highest optimal temperatures (T_opt 26.1-36.2 °C). As for the impact of growth media, radial growth measurements highlighted that B. domesticum was the least affected species for growth on Raclette de Savoie and even grew faster on cheese agar than on synthetic medium confirming its strong adaptation to the cheese environment.

Genomic and Metabolic Features of an Unexpectedly Predominant, Thermophilic, Assistant Starter Microorganism, Thermus thermophilus, in Chinese Inner Mongolian Cheese

Inner Mongolian cheese is a traditional dairy product in China. It is produced without rennet, using naturally acidified milk that is simmered to achieve whey separation. In order to analyse the impact of simmering on the microbial community structure, high-throughput sequencing was performed to obtain bacterial 16S rRNA sequences from cheeses from the Ordos (ES), Ulanqab (WS), Horqin (KS) and Xilingol (XS) grasslands of Inner Mongolia. The relative abundance of an unexpected microorganism, Thermus thermophilus, ranged from 2% to 9%, which meant that its dominance was second only to that of lactic acid bacteria (LABs). Genome sequencing and fermentation validation were performed in T. thermophilus N-1 isolated from the Ordos, and it was determined that T. thermophilus N-1 could ingest and metabolise lactose in milk to produce lactate during the simmering process. T. thermophilus N-1 could also produce acetate, propionate, citrate and other organic acids through a unique acetate production pathway and a complete propionate production pathway and TCA cycle, which may affect texture and flavour development in Inner Mongolian cheese. Simultaneously, the large amount of citrate produced by T. thermophilus N-1 provides a necessary carbon source for continuous fermentation by LABs after the simmering step. Therefore, T. thermophilus N-1 contributes to cheese fermentation as a predominant, thermophilic, assistant starter microorganism unique to Chinese Inner Mongolian cheese.

Sodium Reduction in Traditional Fermented Foods: Challenges, Strategies, and Perspectives

Sodium salt is a pivotal ingredient in traditional fermented foods, but its excessive consumption adversely affects human health, product quality, and production efficiency. Therefore, reducing sodium salt content in traditional fermented foods and developing low-sodium fermented foods have attracted increasing attention. Given the essential role of sodium salt in the safety and quality of fermented foods, appropriate approaches should be applied in the production of low-sodium fermented foods. In this review, the challenges of sodium reduction in traditional fermented foods are presented, including the possible growth of pathogenic bacteria, the formation of hazardous chemicals, flavor deficiency, and texture deterioration. Physical, chemical, and biological strategies are also discussed. This review provides references for improving the quality and safety of low-sodium fermented foods.

Evaluation of nutritional composition and sensory properties of cheese, cheese spreads and traditional butter from Slovak production

Cheese production is associated with the analysis of its nutritional composition as well as with the sensory evaluation of the acceptance of the products. The paper is aimed at the determination of basic chemical parameters such as the content of proteins, fat, dry matter, salt and, pH and also on the evaluation of sensory properties of hard cheeses by the sensory panel. The GC-MS analysis of cheeses, cheese spreads, and traditional butter was performed to evaluate the aroma profile of the dairy products analyzed. The dry matter in the analyzed cheeses varied between 56.75 and 71.83%, the fat content varied from 18.73 to 30.83%, and the salt from 1.21 to 2.61%. The presence of proteins was found between 27.76 and 32.61% and the pH of the cheeses ranged from 5.21 to 6.01. The results of the sensory analysis were processed using a PCA map. The results showed that sample no. 5 was rated within all attributes as the best. Sample 3, 2, and 1 followed. Sample 4 received the lowest score. The volatile aromatic compounds that contribute to a taste perception were analyzed by GC-MS in dairy products. The aroma profile was built by the volatile compounds that belonged to chemical families of alcohols, aldehydes, ketones, esters, amides, amines, imines, and terpenes. In particular, cheeses contained mostly alcohols (3-methyl-1-butanol), aldehydes (3-methylbutanal and benzaldehyde), and ketones (acetoin, 2,3,3-trimethylcyclobutanone, 2-heptanone, 2,3-butanedione, acetone, 2-butanone, 2-nonanone, 2- pentanone).  The spreads most often contained alcohols (represented by 2-methyl-1-butanol, 3-methyl-1-butanol and cyclopropane-1,2,3-d3-methanol), aldehydes (2-methylbutanal, 3-methylbutanal, benzaldehyde) and ketones (acetoin, 2-heptanone, 2-pentanone, 2-butanone and 2,3-butanedione).

Histamine-forming ability of Lentilactobacillus parabuchneri in reduced salt Cheddar cheese

Lentilactobacillus parabuchneri, a member of the non-starter microbiota in cheese, was recently associated with fast and effective histamine-formation ability, a safety issue. The present study was performed to investigate Lentilactobacillus parabuchneri KUH8, a histamine-producer (HP) in reduced-salt Cheddar cheese. Four cheeses were manufactured: 1) normal-salt (NS); 2) reduced-salt (RS); 3) normal-salt with HP (NS+HP); 4) reduced-salt with HP (RS+HP). Two replicates were produced with milk from the same batch, and the cheeses ripened at 10 and 15 °C. Cheeses were sampled immediately after manufacture and after 1, 3 and 6 months of ripening. Ultra-high-performance-liquid chromatography indicated that with the HP, histamine reached higher levels in reduced-salt cheeses (3.5-3.7% S/M) at 15 °C (86, 1112, 2149 and 3149 mg kg^-1), compared to normal-salt cheeses (5.4-6.3% S/M) at 10 °C (78, 584, 593 and 1389 mg kg^-1), at each respective cheese-sampling point. Higher salt-content reduced the growth rate of non-starter microbiota, but after six months the levels in all cheeses were similar, according to the ripening temperature: at 10 °C (8.05-8.30 log₁₀ cfu g^-1), and at 15 °C (6.00-6.94 log₁₀ cfu g^-1). A correlation between increased histamine levels, non-starter-cell development and pH was found. This study highlights the importance of normal-salt content and low-ripening temperature as measures to control histamine-formation and to improve safety in cheese.

Shifts of microbiota during cheese production: impact on production and quality

The high-throughput DNA sequencing (HTS) method is used to identify microbes in cheese and their potential functional properties. The technique can be applied to the microbiota of the cheese processing environment, raw milk, curd, whey, and starter cultures, and be used to improve the quality, safety, and other physicochemical properties of the final product. The HTS method is also utilized to study the microbiota shift of different types of cheeses during processing, as the composition and functional properties of the microbiome provide unique characteristics to different cheeses. Although there are several reviews that focused on microbiota of various types of cheeses, this review focuses on evaluating the microbiota shift of different types of cheese production and highlights key bacteria in each step of the processing as well as microbiota of various types of cheeses. KEY POINTS: • High-throughput sequencing can be applied to identify microbiota in cheese. • Microbiota in cheese is changed during making process and aging. • Starter culture plays an important role to establish microbiota in cheese.

Effect of reduction of sodium content on the microbial ecology of Edam cheese samples

Sodium intake is a major risk factor for non-communicable diseases. Consequently, reformulation of cheeses such as Edam to contain less sodium may contribute to lowering disease risk. However, sodium is essential for cheese manufacture, influencing starter culture bacteria activity and abundance during fermentation. This study aimed to assess the microbial diversity of reformulated Edam cheese samples with a reduced sodium content using culture-independent technique. The microbial diversity of samples produced using simple sodium reduction, as well as by substituting salt with a mineral salt compound containing potassium, were analysed in comparison to regular control Edam samples during manufacture and the subsequent 6-week ripening period using 16S rDNA metagenomics. In addition, a challenge test using Listeria (List.) innocua as a surrogate species for List. monocytogenes was performed. Reducing sodium content did not influence the microbiological composition of reformulated samples in comparison to that of regular samples. The starter culture bacteria dominated the microbial diversity and no increase in spoilage or potentially pathogenic bacterial growth was detected, including that of List. innocua. From a microbiological perspective, it can be concluded that lowering sodium content in Edam samples without affecting the microbial composition is achievable through simple sodium reduction and through implementation of a mineral salt replacement approach.

Evaluation of the Effect of Auxiliary Starter Yeasts With Enzyme Activities on Kazak Cheese Quality and Flavor

To investigate the effect of yeasts on Kazak cheese quality and flavor, three isolated yeasts (Kluyveromyces marxianus A2, Pichia kudriavzevii A11, and Pichia fermentans A19) were used to ferment cheeses and designated as StC, LhC, and WcC, respectively. The cheese fermented with a commercial lactic acid starter without adding yeast was used as control named LrC. The results showed that the texture of cheese added with yeasts were more brittle. K. marxianus A2 contributed to the formation of free amino acids and organic acids, especially glutamate and lactic acid. Moreover, K. marxianus A2 provides cheese with onion, oily, and floral aromas. Furthermore, P. kudriavzevii A11 promotes a strong brandy, herbaceous, and onion flavor. Although no significant aroma change was observed in PfC, it promoted the production of acetic acid, isoamyl acetate, and phenethyl acetate. These results indicate that yeasts are important auxiliary starters for cheese production.

Development of “New” Bread and Cheese

Bread and cheese have been a popular combination since early times. Indeed, the history of bread dates back to 8000 BC and that of cheese to 7200 BC. However, new types of breads and cheeses are increasingly popular for several reasons, such as allergies, lifestyles, economy and religion. The major challenge is that food manufacturers are offering new products most of which are not welcomed by consumers. Therefore, recently, researchers have placed importance on their relationships with consumers to boost the success of new products. This short review summarizes the backgrounds of recent trends, processes, and principles to manufacture new bread and cheese products, and discusses future perspectives. The development of additive-free, gluten-free rice bread we have recently done from basic research to commercialization of the products is highly focused in this review. Additionally, ongoing studies on plant-based cheeses are introduced from material selection to suggest future outlooks.

Evolution during Three Ripening Stages of Évora Cheese

The variability and heterogeneity found in Évora cheeses, Protected Designation of Origin (PDO), can affect consumers’ choices. Assessing the ripening conditions and their effect can be helpful. To study the effect of ripening duration in Évora cheese PDO, sensory and chemical analyses were performed in cheese samples subjected to 30, 60, and 120 days of ripening under controlled conditions (temperature 14 to 15 °C and humidity 65 to 70%). Sensory analysis was conducted with a homogenous panel previously familiarized with the product after a short training period, and chemical analyses including pH, moisture, NaCl content, a_w, and salt-in-moisture were determined. Panelists were able to distinguish the differences in the organoleptic characteristics of the three cheese stages, and chemical determinations showed significant differences between stages. Interrater agreement was higher in the sensory evaluation of cheeses with a longer maturation period. As expected, cheeses in the 120 days ripening period presented lower pH, moisture, and water activity and had higher salt-in-moisture content. This stage received the highest scores in hardness and color of the crust, intensity, pungency of the aroma, intensity of taste and piquancy, and firmness and granular characteristics of texture. Overall acceptance of cheese samples was positive, regardless of the ripening stage, which probably reflects both the homogeneity of taster profiles and the previous knowledge of this particular product. The degree of ripeness influences the physical, chemical, and sensory characteristics but does not affect the acceptance of this product by the consumer.

Reducing atmosphere packaging as a novel alternative technique for extending shelf life of fresh cheese

An atmosphere composed of hydrogen gas-included gaseous mixture was tested for packaging fresh cheese samples. The cheese samples were packaged in reducing atmosphere packaging (RAP) [RAP 1 (90% CO2/6% N2/4% H2), RAP 2 (50% CO2/46% N2/4% H2)], modified atmosphere packaging (MAP) [MAP 1 (90% CO2/10% N2), MAP 2 (50% CO2/50% N2) and MAP 3 (Air)], and unpackaged (control) conditions without using any preservatives, then stored at + 4 °C for 7 weeks. The closest values of color and titratable acidity to the fresh sample were observed for RAP 1. The highest and lowest total mesophilic-aerobic bacteria counts were noted for control and RAP 1 samples, respectively. The yeast-mold counts of all sample groups increased by the time; where RAPs groups exhibited the lowest counts. The similarity between RAP and fresh samples attracts attention to the protective role of hydrogen in preserving the freshness of fresh cheese without using any preservatives.