Influence of sustainable packaging material and packaging conditions on physicochemical, microbiological, and sensorial properties of cheeses

The aim of this study was to evaluate the influence of different packaging materials [standard foil: BOPP (biaxially oriented polypropylene)/PET (polyester)/PE (polyethylene) for upper layer, and APET (polyethylene terephthalate)/PE for bottom layer; foil 1: PP (polypropylene)/PET/PE/EVOH (ethylene-vinyl alcohol copolymer)/PE upper layer, and PP/PE/EVOH/PE bottom layer; foil 2: PP/PET/PE/EVOH/PE upper layer, and PA (polyamide)/EVOH/PE bottom layer; foil 3: PP/PET/PE upper layer, and PA/EVOH/PE bottom layer; foil 4: PP/PET/PE upper layer, and PA/PE bottom layer; foil 5: PP upper layer, and PP/PP bottom layer] on the quality of 3 different ripening rennet cheeses packed under different modified atmosphere (MAP) conditions as reflected in particular physicochemical, microbiological, and sensorial changes. The changes were monitored during a period of 90 d of storage at 2°C or 8°C. For Gouda cheese, CO2 content of the headspace of the packages was in the range 35% to 45%, whereas for Maasdamer and Sielski Klasyczny cheeses it was 55% to 65%. Three-way ANOVA showed that the foil type influenced the moisture content of Gouda cheese stored for 90 d at 2°C and for Sielski Klasyczny cheese at 8°C, whereas the moisture content was not dependent on MAP conditions during storage. Moreover, the foil type had a significant effect on free fatty acid changes for Gouda and Sielski Klasyczny cheeses stored at 2°C for 90 d. Sensory attributes changed significantly over storage time at 2°C for all studied cheeses as affected by foil type, whereas there was no effect of MAP conditions. In general, the cheeses packed in standard foil and foil 4 were characterized by the highest values of mean sensory attributes. Time was the most significant factor influencing most changes in physicochemical and sensory attributes of cheeses stored at 2°C and 8°C. The storage temperature did not affect the moisture of the samples during storage. In general, we found an increase in the pH value during storage regardless of storage temperature. It was possible to decrease the thickness of the packaging material from initial 103 and 250 µm (standard foil; lid and bottom, respectively) to 98 and 100 µm (foil 4) without affecting sensory attributes of the product.

Application of Furcellaran Nanocomposite Film as Packaging of Cheese

There is a serious need to develop and test new biodegradable packaging which could at least partially replace petroleum-based materials. Therefore, the objective of this work was to examine the influence of the recently developed furcellaran nanocomposite film with silver nanoparticles (obtained by an in situ method) on the quality properties of two cheese varieties: a rennet-curd (gouda) and an acid-curd (quark) cheese. The water content, physicochemical properties, microbiological and organoleptic quality of cheese, and migration of silver nanoparticles were examined. Both the number of Lactococcus and total bacteria count did not differ during storage of gouda regardless of the packaging applied. The number of Lactococcus decreased in analogous quark samples. The use of the film slowed down and inhibited the growth of yeast in gouda and quark, respectively. An inhibitory effect of this film on mold count was also observed; however, only regarding gouda. The level of silver migration was found to be lower in quark than in gouda. The film improved the microbiological quality of cheeses during storage. Consequently, it is worth continuing research for the improvement of this film in order to enable its use in everyday life.

Fate of Salmonella spp. in the Fresh Soft Raw Milk Cheese during Storage at Different Temperatures

The aim of this study was to determine the survival kinetics of Salmonella spp. in unripened, fresh raw milk cheese during storage at 5, 15 and 25 °C. Microbiological (coliforms and E. coli, S. thermophilus, Lactococcus sp., total microbial count and Enterobacteriaceae) and physicochemical (pH and a_w) characteristics were also determined. Two primary models were used to estimate the kinetic parameters of Salmonella spp., namely Weibull and Baranyi and Roberts (no lag) models. Additionally, goodness-of-fit of the primary models was assessed by calculating the R-Square and mean square error. Salmonella spp. growth in the unripened raw milk cheese was inhibited during storage, but nevertheless bacteria survived at 5 °C for 33 days (2.5 log cfu/g) and 15 °C for 18 days (1.8 log cfu/g). A decrease in the number of Salmonella spp. populations from an initial concentration 6.6 log cfu/g to below a detection limit was observed at 25 °C after 7 days of storage of contaminated cheese samples. It was concluded that the storage temperature significantly influenced the inactivation rate of Salmonella spp. in fresh raw milk cheese and proceeded faster at 25 °C compared to remaining storage temperatures.

Development of Biodegradable Flame-Retardant Bamboo Charcoal Composites, Part II: Thermal Degradation, Gas Phase, and Elemental Analyses

Bamboo charcoal (BC) and aluminum hypophosphite (AHP) singly and in combination were investigated as flame-retardant fillers for polylactic acid (PLA). A set of BC/PLA/AHP composites were prepared by melt-blending and tested for thermal and flame-retardancy properties in Part I. Here, in Part II, the results for differential scanning calorimetry (DSC), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR), thermogravimetry-Fourier transform infrared spectrometry (TG-FTIR), X-ray diffraction (XRD), and X-ray photoelectron analysis (XPS) are presented. The fillers either singly or together promoted earlier initial thermal degradation of the surface of BC/PLA/AHP composites, with a carbon residue rate up to 40.3%, providing a protective layer of char. Additionally, BC promotes heterogeneous nucleation of PLA, while AHP improves the mechanical properties and machinability. Gaseous combustion products CO, aromatic compounds, and carbonyl groups were significantly suppressed in only the BC-PLA composite, but not pure PLA or the BC/PLA/AHP system. The flame-retardant effects of AHP and BC-AHP co-addition combine effective gas-phase and condensed-phase surface phenomena that provide a heat and oxygen barrier, protecting the inner matrix. While it generated much CO₂ and smoke during combustion, it is not yet clear whether BC addition on its own contributes any significant gas phase protection for PLA.