Studies of the release of small molecules during pressure germination of spores of Bacillus subtilis

Characterization of high-pressure-treated Bacillus subtilis spore populations using flow cytometry - Shedding light on spore superdormancy at 550 MPa

Mild spore inactivation can be challenging in industry because of the remarkable resistance of bacterial spores. High pressure (HP) can trigger spore germination, which reduces the spore's resistance, and thereby allows mild spore inactivation. However, spore germination is heterogenous. Some slowly germinating or non-germinating spores called superdormant spores remain resistant and can survive. Therefore, superdormant spores need to be characterized to understand the causes of their germination deficiency. Bacillus subtilis spores were pressurized for 50 s - 6 min at a very high pressure (vHP) level of 550 MPa and 60 °C in buffer to trigger germination. For a rapid quantification of the remaining ungerminated superdormant spores, flow cytometry (FCM) analysis was validated using single cell sorting and growth analysis. FCM based on propidium iodide (PI) and SYTO16 can be used for 550 MPa-superdormant spores after short vHP treatments of ≤1 min and post-HP incubation at 37 °C or 60 °C. The need for a post-HP incubation is particular for vHP treatments. The incubation was successful to separate FCM signals from superdormant and germinated spores, thus allowing superdormant spore quantification. The SYTO16 and PI fluorescence levels did not necessarily indicate superdormancy or apparent viability. This highlights the general need for FCM validation for different HP treatment conditions. The ∼7 % of ungerminated, i.e., superdormant, spores were isolated after a vHP treatment (550 MPa, 60 °C, 43-52 s). This allowed the characterization of vHP superdormant spores for the first time. The superdormant spores had a similar dipicolinic acid content as spores of the initial dormant population. Descendants of superdormant spores had a normal vHP germination capacity. The causes of vHP superdormancy were thus unlikely linked to the dipicolinic acid content or a permanent genetic change. Isolated superdormant spores germinated better in a second vHP treatment compared to the initial spore population. This has not been observed for other germination stimuli so far. In addition, the germination capacity of the initial spore population was time-dependent. A vHP germination deficiency can therefore be lost over time and seems to be caused by transient factors. Permanent cellular properties played a minor role as causes of superdormancy under chosen HP treatment conditions. The study gained new fundamental insights in vHP superdormancy which are of applied interest. Understanding superdormancy helps to efficiently develop a strategy to avoid superdormant spores and hence to inactivate all spores. The development of a mild HP spore germination-inactivation process aims at better preserving the food quality.

Bacillus spore germination at moderate high pressure: A review on underlying mechanisms, influencing factors, and its comparison with nutrient germination

Spore-forming bacteria are resistant to stress conditions owing to their ability to form highly resistant dormant spores. These spores can survive adverse environmental conditions in nature, as well as decontamination processes in the food and related industries. Bacterial spores may return to their vegetative state through a process called germination. As spore germination is critical for the loss of resistance, outgrowth, and development of pathogenicity and spoilage potential, the germination pathway has piqued the interest of the scientific community. The inhibition and induction of germination have critical applications in the food industry. Targeted germination can aid in decreasing the resistance of spores and allow the application of milder inactivation procedures. This germination-inactivation strategy allows better maintenance of important food quality attributes. Different stimuli are reported to trigger germination. Among those, isostatic high pressure (HP) has gained increasing attention due to its potential applications in industrial processes. However, pressure-mediated spore germination is extremely heterogeneous as some spores germinate rapidly, while others exhibit slow germination or do not undergo germination at all. The successful and safe implementation of the germination-inactivation strategy, however, depends on the germination of all spores. Therefore, there is a need to elucidate the mechanisms of HP-mediated germination. This work aimed to critically review the current state of knowledge on Bacillus spore germination at a moderate HP of 50-300 MPa. In this review, the germination mechanism, heterogeneity, and influencing factors have been outlined along with knowledge gaps.

The Copy Number of the spoVA 2mob Operon Determines Pressure Resistance of Bacillus Endospores

The spoVA ^2mob operon confers heat resistance to Bacillus spp., and the resistance correlates to the copy number of the operon. Bacillus endospores also exhibit a strong variation in resistance to pressure, but the underlying mechanisms of endospore resistance to pressure are not fully understood. We determined the effects of multiple spoVA ^2mob operons on high-pressure resistance in Bacillus endospores. The copy numbers of the spoVA ^2mob operon in 17 strains of Bacillus subtilis, Bacillus amyloliquefaciens, Bacillus cereus, Bacillus velezensis, and Bacillus pumilus were determined via droplet digital PCR (ddPCR) and genome sequencing. These strains contained between 0 and 3 copies of the spoVA ^2mob operon; the quantification of the gene copy number by ddPCR was as accurate as whole-genome sequencing. We further tested the pressure resistance of 17 Bacillus endospores at 600 MPa and 80°C. Strains with one or no spoVA ^2mob operon had significantly lower pressure resistance than strains with two or three copies of the operons (P < 0.001), indicating that redundant spoVA ^2mob operons in Bacillus contributed to higher pressure resistance of endospores. The copy number of the spoVA ^2mob operon was not related to the dipicolinic acid (DPA) content of endospores. Overall, the copy number of the spoVA ^2mob operon contributes to pressure resistance of Bacillus endospores. This improves our understanding of the pressure resistance mechanisms in Bacillus spp. and may inform the development of high-pressure sterilization in food processing.IMPORTANCE Bacillus spp. are considered pressure-resistant microorganisms, but the resistance mechanisms remain unknown. The spoVA ^2mob operon is a mobile genetic element, and it can transfer to pathogenic or spoilage organisms by horizontal gene transfer. Results in this study indicate that multiple copies of the spoVA ^2mob operon mediate high-pressure resistance of Bacillus endospores, and it might contribute to the identification of the source of pressure-resistant pathogens and spoilage organisms that may contaminate the food supply. The droplet digital PCR (ddPCR) system is well suited for analysis in some human diseases due to its high efficiency and capability to provide high precision; however, no relevant studies in food microbiology have been reported so far. This study demonstrates a novel application of ddPCR in food microbiology.

Analysis of metabolism in dormant spores of Bacillus species by 31P nuclear magnetic resonance analysis of low-molecular-weight compounds

This work was undertaken to obtain information on levels of metabolism in dormant spores of Bacillus species incubated for weeks at physiological temperatures. Spores of Bacillus megaterium and Bacillus subtilis strains were harvested shortly after release from sporangia and incubated under various conditions, and dormant spore metabolism was monitored by (31)P nuclear magnetic resonance (NMR) analysis of molecules including 3-phosphoglyceric acid (3PGA) and ribonucleotides. Incubation for up to 30 days at 4, 37, or 50°C in water, at 37 or 50°C in buffer to raise the spore core pH from ∼6.3 to 7.8, or at 4°C in spent sporulation medium caused no significant changes in ribonucleotide or 3PGA levels. Stage I germinated spores of Bacillus megaterium that had slightly increased core water content and a core pH of 7.8 also did not degrade 3PGA and accumulated no ribonucleotides, including ATP, during incubation for 8 days at 37°C in buffered saline. In contrast, spores incubated for up to 30 days at 37 or 50°C in spent sporulation medium degraded significant amounts of 3PGA and accumulated ribonucleotides, indicative of RNA degradation, and these processes were increased in B. megaterium spores with a core pH of ∼7.8. However, no ATP was accumulated in these spores. These data indicate that spores of Bacillus species stored in water or buffer at low or high temperatures exhibited minimal, if any, metabolism of endogenous compounds, even when the spore core pH was 7.8 and core water content was increased somewhat. However, there was some metabolism in spores stored in spent sporulation medium.

Inactivation of Bacillus subtilis spores by combining high-pressure thermal sterilization and ethanol

High-pressure thermal sterilization (HPTS) is a new and promising sterilization technology of foods. Effects of combining HPTS and ethanol treatment on inactivation of Bacillus subtilis spores were investigated. An interesting phenomenon was observed. The inactivation effect of HPTS treatment on the spores was enhanced significantly with the increase in ethanol concentration from 0 to 15%. However, the inactivation effect was decreased with further increase in ethanol concentration up to 70%. In addition, the release of DPA and leakages of OD(260) and OD(280) material from the spores increased continuously with the increase in ethanol concentration. Moreover, flow cytometry analysis suggested that although the inner membrane of the spores was damaged, PI could not bind with the spore DNA immediately after HPTS treatment. In conclusion, the mechanism of this special phenomenon could be attributed to the germination of spores under HPTS treatment and effects of ethanol on the protein or water activity. HPTS caused other lethal damages to the spores besides its damage to the inner membrane. Ethanol of low concentrations could significantly enhance the sterilization effects of HPTS, which was good for keeping the qualities of foods.

Inhibition of Bacillus anthracis spore outgrowth by nisin

The lantibiotic nisin has previously been reported to inhibit the outgrowth of spores from several Bacillus species. However, the mode of action of nisin responsible for outgrowth inhibition is poorly understood. By using B. anthracis Sterne 7702 as a model, nisin acted against spores with a 50% inhibitory concentration (IC(50)) and an IC(90) of 0.57 microM and 0.90 microM, respectively. Viable B. anthracis organisms were not recoverable from cultures containing concentrations of nisin greater than the IC(90). These studies demonstrated that spores lose heat resistance and become hydrated in the presence of nisin, thereby ruling out a possible mechanism of inhibition in which nisin acts to block germination initiation. Rather, germination initiation is requisite for the action of nisin. This study also revealed that nisin rapidly and irreversibly inhibits growth by preventing the establishment of oxidative metabolism and the membrane potential in germinating spores. On the other hand, nisin had no detectable effects on the typical changes associated with the dissolution of the outer spore structures (e.g., the spore coats, cortex, and exosporium). Thus, the action of nisin results in the uncoupling of two critical sequences of events necessary for the outgrowth of spores: the establishment of metabolism and the shedding of the external spore structures.

Release of small molecules during germination of spores of Bacillus Species

Free amino acids, dipicolinic acid, and unidentified small molecules were released early in Bacillus spore germination before hydrolysis of the peptidoglycan cortex, but adenine nucleotides and 3-phosphoglycerate were not. These results indicate that early in germination there is a major selective change in the permeability of the spore's inner membrane.

Role of dipicolinic acid in the germination, stability, and viability of spores of Bacillus subtilis

Spores of Bacillus subtilis spoVF strains that cannot synthesize dipicolinic acid (DPA) but take it up during sporulation were prepared in medium with various DPA concentrations, and the germination and viability of these spores as well as the DPA content in individual spores were measured. Levels of some other small molecules in DPA-less spores were also measured. These studies have allowed the following conclusions. (i) Spores with no DPA or low DPA levels that lack either the cortex-lytic enzyme (CLE) SleB or the receptors that respond to nutrient germinants could be isolated but were unstable and spontaneously initiated early steps in spore germination. (ii) Spores that lacked SleB and nutrient germinant receptors and also had low DPA levels were more stable. (iii) Spontaneous germination of spores with no DPA or low DPA levels was at least in part via activation of SleB. (iv) The other redundant CLE, CwlJ, was activated only by the release of high levels of DPA from spores. (v) Low levels of DPA were sufficient for the viability of spores that lacked most alpha/beta-type small, acid-soluble spore proteins. (vi) DPA levels accumulated in spores prepared in low-DPA-containing media varied greatly between individual spores, in contrast to the presence of more homogeneous DPA levels in individual spores made in media with high DPA concentrations. (vii) At least the great majority of spores of several spoVF strains that contained no DPA also lacked other major spore small molecules and had gone through some of the early reactions in spore germination.