Dependence of Baroreceptor-Mediated Sympathetic Outflow on Biventricular Assist Device Driving Frequency

Monitoring System for the Totally Implantable Ventricular Assist System by Use of Sensors for Virtual Reality

For the development of the totally implantable artificial organs, it is an important problem to monitor the conditions of the implantable devices, especially when used in clinical cases. In this study, we used position sensors for the 3-dimensional (3-D) virtual reality (VR) system monitor an implantable artificial heart. The sensors used in the experiments were 3-space Fastrak (Polhemus, USA). The position sensors using electro-magnetic forces were attached to the inner actuating zone. Sensitivity of the position sensors was in the order of around 0.8 mm. By use of these VR position sensors, we could easily detect the six degrees of freedom as x,y,z, and pitch, yaw, roll of these sensors. Experimental evaluation using a model circulation loop and healthy adult goats was performed. Experimental results suggest that our newly developed implantable sensors for monitoring the implantable artificial heart system were useful for sensing driving condition, thus possibly useful for the implantable devices for clinical usage.

Development of Total Artificial Heart with Economical and Durability Advantages

To develop a total artificial heart (TAH) pump system, we created a design paying particular attention to durability and cost. We adopted a pneumatically driven sac type artificial heart, where the configuration of the sac was decided according to the methodology of flow visualization. Its configuration is almost round to achieve as little stagnation as possible and a low turbulent flow. The main body of the sac was made using polyvinyl chloride (PVC) paste. The paste was poured into an external mold, and heated in a hot air drying oven. Coating was performed using polyurethane. The basic performance of this pump system was tested using a model circulation circuit, and a fitting study through acute animal experiment, using a healthy adult goat, was carried out. As for the TAH produced experimentally, a pump output exceeding 5.0 l/min in the model circulation circuit was provided. Implantation in the internal pleural cavity of a healthy adult goat, 55 kg in weight, proved possible and quite easy in comparison. It is thought that a more refined design in the connector part is desirable. Furthermore, a chronic experiment with the TAH will be carried out, and examination will need to be repeated in the future.