Clinical evaluation of a new dialyzer, FLX-12 GW, with a polyester-polymer alloy membrane

Cellulose-Ester as Membrane Materials for Hemodialysis

The majority of dialysis membranes are fabricated from regenerated unmodified cellulose. This standard type of cellulosic membrane is frequently under attack because of its alleged lack of biocompatibility. Recent developments, however, have proven that a chemical modification of the reactive surface groups of regenerated cellulose, the hydroxylgroups, limits the complement-activating potential of these materials and thus improves its blood-compatibility. We extended the idea of modifying cellulose for improved blood-compatibility to a series of different cellulose esters. Special focus was directed towards the question whether a variation of the type of substituent and degree of substitution could influence the blood-compatibility pattern of these materials: the analysis of blood-compatibility profiles showed a direct dependency on the type of substituent and the degree of substitution (DS). As an example, it was found that the DS, necessary for a complete reduction of complement activation, decreases with increasing chain lengths of aliphatic substituents. Optimal degrees of substitution are characteristic of the type of substituents and enable us to tailor materials specifically for optimized blood compatibility.

Influence of dialysis modalities on serum AGE levels in end-stage renal disease patients

BACKGROUND

The accumulation of advanced glycation end-products (AGEs) in end-stage renal disease (ESRD) influenced by dialysis modalities is of current interest. Highly permeable membranes in haemodialysis or haemofiltration should be able to eliminate circulating AGEs as well as their AGE precursors more efficiently.

METHODS

In our study, 10 non-diabetic and 10 diabetic ESRD patients were on haemodialysis with low-flux membranes (LF) followed by a cross-over haemodialysis with high-flux or super-flux polysulfone membranes (HF, SF) for 6 months each. We measured the protein-bound pentosidine and free pentosidine serum levels by high-performance liquid chromatography (HPLC) as well as the serum AGE peptide, AGE-beta(2)-microglobulin and beta(2)-microglobulin concentrations, using ELISA assays.

RESULTS

All parameters investigated were significantly higher in dialysis patients than in healthy subjects. The reduction rates during a single dialysis session were found to be higher using the SF than those obtained with the HF (free pentosidine 82.4+/-7.3 vs 76.6+/- 8.7%; AGE peptides 79.7+/-7.7 vs 62.3+/-14.7%; AGE-beta(2)-microglobulin 64.0+/-16.5 vs 45.4+/-17.7%; beta(2)-microglobulin 70.5+/-5.6 vs 58.2+/-6.0%). The protein-bound pentosidine levels remained constant over the respective dialysis sessions. In the 6-month treatment period with the SF, decreased pre-dialysis serum levels of protein-bound pentosidine, free pentosidine and AGE peptides were observed in non-diabetics and diabetics as compared with values obtained with the LF. The respective pre-dialysis AGE-beta(2)-microglobulin concentrations decreased insignificantly, whereas those of beta(2)-microglobulin were significantly lower. Using the HF dialyser, only moderate changes of the parameters measured were noted.

CONCLUSION

Treatment with the biocompatible polysulfone SF dialyser seems to be better suited to lower serum AGE levels and to eliminate their precursors.

An evaluation of a polyethersulfone hollow fiber plasma separator by animal experiment

Membrane plasma separators are being used routinely for therapy in various diseases. In this study, a newly developed plasma separator made of polyethersulfone (PES) hollow fibers was evaluated for its plasma filtration efficiency and blood compatibility by animal experiment. Hemolysis did not occur under the usual conditions of plasma separation. The sieving coefficients of total protein and albumin were over 95%, and the total cholesterol was over 90% throughout the perfusions. Decreases in white blood cells, platelets, fibrinogen, and coagulation factors were observed during the early stage of plasma separation, but appear to be within acceptable ranges for clinical use.

Clinical study of high-flux cuprammonium rayon hemodialysis membranes

The aim of this crossover clinical study was to gain basic information on the hemocompatibility and effectiveness of recently developed high-flux membranes made of cuprammonium rayon with ultrafiltration coefficients of 10, 17, and 19 ml/mm Hg/h (S12W, SU12W, and SS12W dialyzers, respectively), and to identify any possible differences from a conventional membrane made of the same material with an ultrafiltration coefficient of 6 ml/mm Hg/h (C12W dialyzer). All the tested membranes led to an abrupt drop in leukocyte count in the initial phase of hemodialysis. In high-flux membranes, C5a anaphylatoxin would pass into the dialysate, but mean C5a anaphylatoxin concentrations in the dialysate were lower by orders of magnitude than its plasma concentrations, which behaved, in high- and low-flux membranes alike, typically of those made of nonsubstituted cellulose with no intermembrane differences. As judged by the concentrations of the thrombin-antithrombin III complex, the coagulation system was activated--again, without differences between membranes. The reduction rates for urea, creatinine, and phosphates were comparable for all the tested membranes. Compared with baseline, the post-dialysis serum concentrations of beta 2-microglobulin in high-flux membranes, unlike the low-flux membrane, were significantly lower. We conclude that there are no significant differences between the tested high- and low-flux membranes made of cuprammonium rayon in the monitored hemocompatibility parameters, and that high-flux membranes are capable of reducing serum beta 2-microglobulin concentrations.