In vitro exploration and finite element analysis of failure mechanisms of resin-bonded fixed partial dentures

Longevity of resin-bonded fixed partial dentures made of metal alloys: A review of the literature

Purpose In this review, we evaluate the survival rate of resin-bonded fixed partial dentures (RBFPDs) made of metal alloys.Methods An electronic search of English peer-reviewed dental literature on PubMed was conducted to identify all publications reporting on RBFPDs made of metal alloys until March 2019. The searched keywords were: bridge OR fixed partial denture OR fixed prosthesis OR fixed prostheses AND resin bonded AND metal OR alloy AND survival OR longevity (RBFPD was not included). Furthermore, the "Related Articles" feature of PubMed was used to identify further references of interest during the primary search. A definitive list of articles was screened to extract qualitative data after the application of the inclusion and exclusion criteria, and the results were analyzed.Results Overall, 977 publications were found through an electronic and manual search, out of which 130 articles were selected after screening based on title and abstract. A total of 52 publications passed the second review phase after assessment for eligibility, from which 24 studies were excluded after full-text screening. Finally, a total of 28 studies were selected.Conclusions The survival rate of RBFPDs differed greatly depending on the type of metal alloy, adhesion system, and observation period assessed, e.g. the 10-year survival rate ranged from 18% to 88%. The wide range of survival rates of the RBFPDs reported indicates that though RBFPD is a reliable prosthesis, it is prone to failure if some processes are not completed.

Increased Stress Concentration in Prosthesis, Adhesive Cement, and Periodontal Tissue with Zirconia RBFDPs by the Reduced Alveolar Bone Height

PURPOSE

To investigate the risk of debonding of resin-bonded fixed dental prosthesis frameworks and the effects on the periodontal tissue in patients with reduced alveolar bone levels.

MATERIALS AND METHODS

The abutment teeth were the upper central incisor and the canine. Resin-bonded fixed dental prosthesis framework fabricated using zirconia was set to models with five different alveolar bone levels. A 200-N load (the maximum clenching force of the anterior teeth) was applied to the center of the pontic to analyze the internal stress on the framework, adhesive cement, and periodontal tissue using finite element analysis.

RESULTS

The mean maximum principal stress generated in the framework was 25.33 and 29.35 MPa in the models with the normal and the lowest alveolar bone level, respectively. Regarding shear stress on the adhesive cement, stress concentration was observed on the connector side in all models, and it increased on the cervical side of the central incisor as the alveolar bone level decreased. In addition, the mean maximum and minimum principal strains generated on the periodontal ligament of the central incisor and canine tended to increase as alveolar bone loss progressed. Furthermore, the mean maximum principal stress on the cortical bone was the greatest in the model with the most significant bone loss at 5.10 MPa.

CONCLUSIONS

This study suggested that the risk of debonding and periodontal tissue damage might be higher when resin-bonded fixed dental prosthesis frameworks were used in patients with reduced alveolar bone levels compared to those in a healthy state.

Short communication: Influence of restorative material and cement on the stress distribution of posterior resin-bonded fixed dental prostheses: 3D finite element analysis

The goal of this study was to compare the mechanical response of resin-bonded fixed dental prosthesis (RBFDP) made in zirconia, metal, lithium disilicate and composite resin cemented using resin cements with different elastic modulus. For the finite element analysis, a three-dimensional model of partial right maxilla was used to create a model with edentulous space in the second premolar and the cavity's preparation on the first pre-molar and first molar to receive a RBFDP. The model was imported to the analysis software in which they were divided into mesh composed by nodes (371,101) and tetrahedral elements (213,673). Each material was considered isotropic, elastic and homogeneous. No-separation contacts were considered between restoration/resin cement and resin cement/tooth. For all other structures the contacts were considered ideal. The model fixation occurred at the base of the bone and an axial load of 300 N was applied on the pontic occlusal surface. To simulate polymerization shrinkage effects on the cement, the thermal expansion approach was used. The displacement and maximum principal stress (in MPa) were selected as failure criteria. The prosthesis made in composite resin showed higher displacement, while in zirconia showed higher stress concentration. Tensile stress between restoration/cement, cement and cement/cavity was directly proportional to the restorative material's elastic modulus. The more rigid cement increases the tensile zones in the cement layer but decreases the stress between prosthesis and cement. The molar cavity showed higher stress concentration between restoration/cement than the preparation in the pre-molar tooth. The use of composite resin for the manufacturing of RBFDP increases the displacement of the set during the loading. However, it reduces the amount of stress concentration at the adhesive interface in comparison with the other materials.

Tensile Strength of Resin Cements Used with Base Metals in a Simulating Passive Cementation Technique for Implant-Supported Prostheses

Abstract The aim of this study was to analyze the tensile strength of two different resin cements used in passive cementation technique for implant-supported prosthesis. Ninety-six plastic cylinders were waxed in standardized forms, cast in commercially pure titanium, nickel-chromium and nickel-chromium-titanium alloys. Specimens were cemented on titanium cylinders using self-adhesive resin cement or conventional dual-cured resin cement. Specimens were divided in 12 groups (n=8) in accordance to metal, cement and ageing process. Specimens were immersed in distilled water at 37 °C for 24 h and half of them was thermocycled for 5,000 cycles. Specimens were submitted to bond strength test in a universal test machine EMIC-DL2000 at 5 mm/min speed. Statistical analysis evidenced higher tensile strength for self-adhesive resin cement than conventional dual-cured resin cement, whatever the used metal. Self-adhesive resin cement presented higher tensile strength compared to conventional dual-cured resin cement. In conclusion, metal type and ageing process did not influence the tensile strength results.