Development of a screening approach to interpret human biomonitoring data on volatile organic compounds: reverse dosimetry on biomonitoring data for trichloroethylene

Explore the Dosimetric Relationship between the Intake of Chemical Contaminants and Their Occurrence in Blood and Urine

The dosimetric relationship between the human intake dose of a chemical contaminant (an "external dose") and its concentrations in bodily fluids such as blood and urine (related to an "internal dose"), often characterized by a dose-to-concentration ratio, has critical applications in exposure science, toxicology, and risk assessment, especially in the "new approach methods" era. However, there is a lack of a mechanistic, systematic understanding of how such a dosimetric relationship depends on fundamental chemical properties, such as partition coefficients and biotransformation half-lives. Here, we investigate this issue using a well-evaluated toxicokinetic model, which links external and internal doses by quantifying the absorption and elimination of chemicals. Results are visualized in a series of chemical partitioning space plots, whereby a chemical's dose-to-concentration ratio can be approximately predicted based on its partitioning between air, water, and octanol phases. Our results indicate that when taken in equal doses, chemicals with low volatility and moderate to high hydrophobicity exhibit the highest concentrations in the blood, and chemicals undergoing significant biotransformation tend to exhibit lower concentrations in comparison to their counterparts undergoing negligible biotransformation but possessing similar partitioning properties. Chemicals with high hydrophilicity have the highest concentrations in urine. Such revealed property dependence is similar for both adults and children and for individuals with normal body weights and with obesity. Overall, insights gained from this study are important in predicting blood and urinary concentrations from exposure information and in determining the exposure rate that produces the blood or urinary concentrations observed in biomonitoring studies.

Sensing Techniques for Organochlorides through Intermolecular Interaction with Bicyclic Amidines

Toxic organochloride molecules are widely used in industry for various purposes. With their high volatility, the direct detection of organochlorides in environmental samples is challenging. Here, a new organochloride detection mechanism using 1,5-diazabicyclo[4.3.0]non-5-ene (DBN) is introduced to simplify a sensing method with higher detection sensitivity. Three types of organochloride compounds-trichloroethylene (TCE), dichloromethane (DCM), and dichlorodiphenyltrichloroethane (DDT)—were targeted to understand DCM conjugation chemistry by using nuclear magnetic resonance (NMR) and liquid chromatography with a mass spectrometer (LC-MS). ¹³C-NMR spectra and LC-MS data indicated that DBN can be labeled on these organochloride compounds by chlorine–nitrogen interaction. Furthermore, to demonstrate the organochloride sensing capability, the labeling yield and limit of detection were determined by a colorimetric assay as well as micellar electrokinetic chromatography (MEKC). The interaction with DBN was most appreciable for TCE, among other organochlorides. TCE was detected at picomolar levels, which is two orders of magnitude lower than the maximum contaminant level set by the United States Environmental Protection Agency. MEKC, in conjunction with this DBN-labeling method, enables us to develop a field-deployable sensing platform for detecting toxic organochlorides with high sensitivity.

Evaluation and comparison of in vitro intrinsic clearance rates measured using cryopreserved hepatocytes from humans, rats, and rainbow trout

In vitro and in silico methods that can reduce the need for animal testing are being used with increasing frequency to assess chemical risks to human health and the environment. The rate of hepatic biotransformation is an important species-specific parameter for determining bioaccumulation potential and extrapolating in vitro bioactivity to in vivo effects. One approach to estimating hepatic biotransformation is to employ in vitro systems derived from liver tissue to measure chemical (substrate) depletion over time which can then be translated to a rate of intrinsic clearance (CL_int). In the present study, cryopreserved hepatocytes from humans, rats, and rainbow trout were used to measure CL_int values for 54 industrial and pesticidal chemicals at starting test concentrations of 0.1 and 1 μM. A data evaluation framework that emphasizes the behavior of Heat-Treated Controls (HTC) was developed to identify datasets suitable for rate reporting. Measured or estimated ("greater than" or "less than") CL_int values were determined for 124 of 226 (55 %) species-chemical-substrate concentration datasets with acceptable analytical chemistry. A large percentage of tested chemicals exhibited low HTC recovery values, indicating a substantial abiotic loss of test chemical over time. An evaluation of K_OW values for individual chemicals suggested that in vitro test performance declined with increasing chemical hydrophobicity, although differences in testing devices for mammals and fish also likely played a role. The current findings emphasize the value of negative controls as part of a rigorous approach to data quality assessment for in vitro substrate depletion studies. Changes in current testing protocols can be expected to result in the collection of higher quality data. However, poorly soluble chemicals are likely to remain a challenge for CL_int determination.

Reverse dosimetry modeling of toluene exposure concentrations based on biomonitoring levels from the Canadian health measures survey

Biomonitoring might provide useful estimates of population exposure to environmental chemicals. However, data uncertainties stemming from interindividual variability are common in large population biomonitoring surveys. Physiologically based pharmacokinetic (PBPK) models might be used to account for age- and gender-related variability in internal dose. The objective of this study was to reconstruct air concentrations consistent with blood toluene measures reported in the third Canadian Health Measures Survey using reverse dosimetry PBPK modeling techniques. Population distributions of model's physiological parameters were described based upon age, weight, and size for four subpopulations (12-19, 20-39, 40-59, and 60-79 years old). Monte Carlo simulations applied to PBPK modeling allowed converting the distributions of venous blood measures of toluene obtained from CHMS into related air levels. Based upon blood levels observed at the 50^th, 90^th and 95^th percentiles, corresponding air toluene concentrations were estimated for teenagers aged 12-19 years as being, respectively, 0.009, 0.04 and 0.06 ppm. Similarly, values were computed for adults aged 20-39 years (0.007, 0.036, and 0.06 ppm), 40-59 years (0.007, 0.036 and 0.06 ppm) and 60-79 years (0.006, 0.022 and 0.04 ppm). These estimations are well below Health Canada's maximum recommended chronic air guidelines for toluene. In conclusion, PBPK modeling and reverse dosimetry may be combined to help interpret biomonitoring data for chemical exposure in large population surveys and estimate the associated toxicological health risk.

A Physiologically-Based Pharmacokinetic Modeling Approach Using Biomonitoring Data in Order to Assess the Contribution of Drinking Water for the Achievement of an Optimal Fluoride Dose for Dental Health in Children

Due to an optimal fluoride concentration in drinking water advised for caries prevention purposes, the population is now exposed to multiple sources of fluoride. The availability of population biomonitoring data currently allow us to evaluate the magnitude of this exposure. The objective of this work was, therefore, to use such data in order to estimate whether community water fluoridation still represents a significant contribution toward achieving a suggested daily optimal fluoride (external) intake of 0.05 mg/kg/day. Therefore, a physiologically-based pharmacokinetic model for fluoride published in the literature was used and adapted in Excel for a typical 4-year-old and 8-year-old child. Biomonitoring data from the Canadian Health Measures Survey among people living in provinces with very different drinking water fluoridation coverage (Quebec, 2.5%; Ontario, 70% of the population) were analyzed using this adapted model. Absorbed doses for the 4-year-old and 8-year-old children were, respectively, 0.03 mg/kg/day and 0.02 mg/kg/day in Quebec and of 0.06 mg/kg/day and 0.05 mg/kg/day in Ontario. These results show that community water fluoridation contributes to increased fluoride intake among children, which leads to reaching, and in some cases even exceeding, the suggested optimal absorbed dose of 0.04 mg/kg/day, which corresponds to the suggested optimal fluoride intake mentioned above. In conclusion, this study constitutes an incentive to further explore the multiple sources of fluoride intake and suggests that a new balance between them including drinking water should be examined in accordance with the age-related physiological differences that influence fluoride metabolism.

A Computational Workflow for Probabilistic Quantitative in Vitro to in Vivo Extrapolation

A computational workflow was developed to facilitate the process of quantitative in vitro to in vivo extrapolation (QIVIVE), specifically the translation of in vitro concentration-response to in vivo dose-response relationships and subsequent derivation of a benchmark dose value (BMD). The workflow integrates physiologically based pharmacokinetic (PBPK) modeling; global sensitivity analysis (GSA), Approximate Bayesian Computation (ABC) and Markov Chain Monte Carlo (MCMC) simulation. For a given set of in vitro concentration and response data the algorithm returns the posterior distribution of the corresponding in vivo, population-based dose-response values, for a given route of exposure. The novel aspect of the workflow is a rigorous statistical framework for accommodating uncertainty in both the parameters of the PBPK model (both parameter uncertainty and population variability) and in the structure of the PBPK model itself recognizing that the model is an approximation to reality. Both these sources of uncertainty propagate through the workflow and are quantified within the posterior distribution of in vivo dose for a fixed representative in vitro concentration. To demonstrate this process and for comparative purposes a similar exercise to previously published work describing the kinetics of ethylene glycol monoethyl ether (EGME) and its embryotoxic metabolite methoxyacetic acid (MAA) in rats was undertaken. The computational algorithm can be used to extrapolate from in vitro data to any organism, including human. Ultimately, this process will be incorporated into a user-friendly, freely available modeling platform, currently under development, that will simplify the process of QIVIVE.

Use of Physiologically Based Kinetic Modeling-Based Reverse Dosimetry to Predict in Vivo Toxicity from in Vitro Data

The development of reliable nonanimal based testing strategies, such as in vitro bioassays, is the holy grail in current human safety testing of chemicals. However, the use of in vitro toxicity data in risk assessment is not straightforward. One of the main issues is that concentration-response curves from in vitro models need to be converted to in vivo dose-response curves. These dose-response curves are needed in toxicological risk assessment to obtain a point of departure to determine safe exposure levels for humans. Recent scientific developments enable this translation of in vitro concentration-response curves to in vivo dose-response curves using physiologically based kinetic (PBK) modeling-based reverse dosimetry. The present review provides an overview of the examples available in the literature on the prediction of in vivo toxicity using PBK modeling-based reverse dosimetry of in vitro toxicity data, showing that proofs-of-principle are available for toxicity end points ranging from developmental toxicity, nephrotoxicity, hepatotoxicity, and neurotoxicity to DNA adduct formation. This review also discusses the promises and pitfalls, and the future perspectives of the approach. Since proofs-of-principle available so far have been provided for the prediction of toxicity in experimental animals, future research should focus on the use of in vitro toxicity data obtained in human models to predict the human situation using human PBK models. This would facilitate human- instead of experimental animal-based approaches in risk assessment.

Breath analysis: technical developments and challenges in the monitoring of human exposure to volatile organic compounds

At present, there is a growing concern about human quality of life. In particular, there is an awareness of the impact of volatile organic compounds (VOCs) on the environment and human health, so the monitoring of human exposure to VOCs is an increasingly urgent need. Biomonitoring is theoretically more accurate compared with traditional ambient air monitoring, and it plays an essential role in human environmental exposure assessment. Breath analysis is a biomonitoring method with many advantages, which is applicable to assessments of human exposure to a large number of VOCs. Techniques are being developed to improve the sensitivity and precision of breath analysis based on in-direct and direct measurements which will be reviewed in this paper. This paper briefly reviews the frequently used methods in both of these categories, specifically highlighting some promising new techniques. Furthermore, this review also provides theoretical background knowledge about the use of breath analysis as a biomonitoring tool for human exposure assessment. A review of the application of breath analysis to human exposure monitoring during last two decades is also provided according to occupational/non-occupational exposure. Obstacles and potential challenges in this field are also summarized. Based on the gradual improvements in the theoretical basis and technology reviewed in this paper, breath analysis is an enormous potential approach for the monitoring of human exposure to VOCs.

Quantitative in vitro-to-in vivo extrapolation in a high-throughput environment

High-throughput in vitro toxicity screening provides an efficient way to identify potential biological targets for environmental and industrial chemicals while conserving limited testing resources. However, reliance on the nominal chemical concentrations in these in vitro assays as an indicator of bioactivity may misrepresent potential in vivo effects of these chemicals due to differences in clearance, protein binding, bioavailability, and other pharmacokinetic factors. Development of high-throughput in vitro hepatic clearance and protein binding assays and refinement of quantitative in vitro-to-in vivo extrapolation (QIVIVE) methods have provided key tools to predict xenobiotic steady state pharmacokinetics. Using a process known as reverse dosimetry, knowledge of the chemical steady state behavior can be incorporated with HTS data to determine the external in vivo oral exposure needed to achieve internal blood concentrations equivalent to those eliciting bioactivity in the assays. These daily oral doses, known as oral equivalents, can be compared to chronic human exposure estimates to assess whether in vitro bioactivity would be expected at the dose-equivalent level of human exposure. This review will describe the use of QIVIVE methods in a high-throughput environment and the promise they hold in shaping chemical testing priorities and, potentially, high-throughput risk assessment strategies.

Chip-based liver equivalents for toxicity testing--organotypicalness versus cost-efficient high throughput

Drug-induced liver toxicity dominates the reasons for pharmaceutical product ban, withdrawal or non-approval since the thalidomide disaster in the late-1950s. Hopes to finally solve the liver toxicity test dilemma have recently risen to a historic level based on the latest progress in human microfluidic tissue culture devices. Chip-based human liver equivalents are envisaged to identify liver toxic agents regularly undiscovered by current test procedures at industrial throughput. In this review, we focus on advanced microfluidic microscale liver equivalents, appraising them against the level of architectural and, consequently, functional identity with their human counterpart in vivo. We emphasise the inherent relationship between human liver architecture and its drug-induced injury. Furthermore, we plot the current socio-economic drug development environment against the possible value such systems may add. Finally, we try to sketch a forecast for translational innovations in the field.

Characterization of the human kinetic adjustment factor for the health risk assessment of environmental contaminants

A default uncertainty factor of 3.16 (√10) is applied to account for interindividual variability in toxicokinetics when performing non-cancer risk assessments. Using relevant human data for specific chemicals, as WHO/IPCS suggests, it is possible to evaluate, and replace when appropriate, this default factor by quantifying chemical-specific adjustment factors for interindividual variability in toxicokinetics (also referred to as the human kinetic adjustment factor, HKAF). The HKAF has been determined based on the distributions of pharmacokinetic parameters (e.g., half-life, area under the curve, maximum blood concentration) in relevant populations. This article focuses on the current state of knowledge of the use of physiologically based algorithms and models in characterizing the HKAF for environmental contaminants. The recent modeling efforts on the computation of HKAF as a function of the characteristics of the population, chemical and its mode of action (dose metrics), as well as exposure scenario of relevance to the assessment are reviewed here. The results of these studies, taken together, suggest the HKAF varies as a function of the sensitive subpopulation and dose metrics of interest, exposure conditions considered (route, duration, and intensity), metabolic pathways involved and theoretical model underlying its computation. The HKAF seldom exceeded the default value of 3.16, except in very young children (i.e., <≈ 3 months) and when the parent compound is the toxic moiety. Overall, from a public health perspective, the current state of knowledge generally suggest that the default uncertainty factor is sufficient to account for human variability in non-cancer risk assessments of environmental contaminants.

Advancing human health risk assessment: integrating recent advisory committee recommendations

Over the last dozen years, many national and international expert groups have considered specific improvements to risk assessment. Many of their stated recommendations are mutually supportive, but others appear conflicting, at least in an initial assessment. This review identifies areas of consensus and difference and recommends a practical, biology-centric course forward, which includes: (1) incorporating a clear problem formulation at the outset of the assessment with a level of complexity that is appropriate for informing the relevant risk management decision; (2) using toxicokinetics and toxicodynamic information to develop Chemical Specific Adjustment Factors (CSAF); (3) using mode of action (MOA) information and an understanding of the relevant biology as the key, central organizing principle for the risk assessment; (4) integrating MOA information into dose-response assessments using existing guidelines for non-cancer and cancer assessments; (5) using a tiered, iterative approach developed by the World Health Organization/International Programme on Chemical Safety (WHO/IPCS) as a scientifically robust, fit-for-purpose approach for risk assessment of combined exposures (chemical mixtures); and (6) applying all of this knowledge to enable interpretation of human biomonitoring data in a risk context. While scientifically based defaults will remain important and useful when data on CSAF or MOA to refine an assessment are absent or insufficient, assessments should always strive to use these data. The use of available 21st century knowledge of biological processes, clinical findings, chemical interactions, and dose-response at the molecular, cellular, organ and organism levels will minimize the need for extrapolation and reliance on default approaches.

Toxicokinetics as a key to the integrated toxicity risk assessment based primarily on non-animal approaches

Toxicokinetics (TK) is the endpoint that informs about the penetration into and fate within the body of a toxic substance, including the possible emergence of metabolites. Traditionally, the data needed to understand those phenomena have been obtained in vivo. Currently, with a drive towards non-animal testing approaches, TK has been identified as a key element to integrate the results from in silico, in vitro and already available in vivo studies. TK is needed to estimate the range of target organ doses that can be expected from realistic human external exposure scenarios. This information is crucial for determining the dose/concentration range that should be used for in vitro testing. Vice versa, TK is necessary to convert the in vitro results, generated at tissue/cell or sub-cellular level, into dose response or potency information relating to the entire target organism, i.e. the human body (in vitro-in vivo extrapolation, IVIVE). Physiologically based toxicokinetic modelling (PBTK) is currently regarded as the most adequate approach to simulate human TK and extrapolate between in vitro and in vivo contexts. The fact that PBTK models are mechanism-based which allows them to be 'generic' to a certain extent (various extrapolations possible) has been critical for their success so far. The need for high-quality in vitro and in silico data on absorption, distribution, metabolism as well as excretion (ADME) as input for PBTK models to predict human dose-response curves is currently a bottleneck for integrative risk assessment.

Reconstruction of Exposure to m-Xylene from Human Biomonitoring Data Using PBPK Modelling, Bayesian Inference, and Markov Chain Monte Carlo Simulation

There are numerous biomonitoring programs, both recent and ongoing, to evaluate environmental exposure of humans to chemicals. Due to the lack of exposure and kinetic data, the correlation of biomarker levels with exposure concentrations leads to difficulty in utilizing biomonitoring data for biological guidance values. Exposure reconstruction or reverse dosimetry is the retrospective interpretation of external exposure consistent with biomonitoring data. We investigated the integration of physiologically based pharmacokinetic modelling, global sensitivity analysis, Bayesian inference, and Markov chain Monte Carlo simulation to obtain a population estimate of inhalation exposure to m-xylene. We used exhaled breath and venous blood m-xylene and urinary 3-methylhippuric acid measurements from a controlled human volunteer study in order to evaluate the ability of our computational framework to predict known inhalation exposures. We also investigated the importance of model structure and dimensionality with respect to its ability to reconstruct exposure.

Application of physiologically based pharmacokinetic models in chemical risk assessment

Post-exposure risk assessment of chemical and environmental stressors is a public health challenge. Linking exposure to health outcomes is a 4-step process: exposure assessment, hazard identification, dose response assessment, and risk characterization. This process is increasingly adopting "in silico" tools such as physiologically based pharmacokinetic (PBPK) models to fine-tune exposure assessments and determine internal doses in target organs/tissues. Many excellent PBPK models have been developed. But most, because of their scientific sophistication, have found limited field application-health assessors rarely use them. Over the years, government agencies, stakeholders/partners, and the scientific community have attempted to use these models or their underlying principles in combination with other practical procedures. During the past two decades, through cooperative agreements and contracts at several research and higher education institutions, ATSDR funded translational research has encouraged the use of various types of models. Such collaborative efforts have led to the development and use of transparent and user-friendly models. The "human PBPK model toolkit" is one such project. While not necessarily state of the art, this toolkit is sufficiently accurate for screening purposes. Highlighted in this paper are some selected examples of environmental and occupational exposure assessments of chemicals and their mixtures.

Alternative (non-animal) methods for cosmetics testing: current status and future prospects-2010

The 7th amendment to the EU Cosmetics Directive prohibits to put animal-tested cosmetics on the market in Europe after 2013. In that context, the European Commission invited stakeholder bodies (industry, non-governmental organisations, EU Member States, and the Commission's Scientific Committee on Consumer Safety) to identify scientific experts in five toxicological areas, i.e. toxicokinetics, repeated dose toxicity, carcinogenicity, skin sensitisation, and reproductive toxicity for which the Directive foresees that the 2013 deadline could be further extended in case alternative and validated methods would not be available in time. The selected experts were asked to analyse the status and prospects of alternative methods and to provide a scientifically sound estimate of the time necessary to achieve full replacement of animal testing. In summary, the experts confirmed that it will take at least another 7-9 years for the replacement of the current in vivo animal tests used for the safety assessment of cosmetic ingredients for skin sensitisation. However, the experts were also of the opinion that alternative methods may be able to give hazard information, i.e. to differentiate between sensitisers and non-sensitisers, ahead of 2017. This would, however, not provide the complete picture of what is a safe exposure because the relative potency of a sensitiser would not be known. For toxicokinetics, the timeframe was 5-7 years to develop the models still lacking to predict lung absorption and renal/biliary excretion, and even longer to integrate the methods to fully replace the animal toxicokinetic models. For the systemic toxicological endpoints of repeated dose toxicity, carcinogenicity and reproductive toxicity, the time horizon for full replacement could not be estimated.

Chemical-specific screening criteria for interpretation of biomonitoring data for volatile organic compounds (VOCs)--application of steady-state PBPK model solutions

The National Health and Nutrition Examination Survey (NHANES) generates population-representative biomonitoring data for many chemicals including volatile organic compounds (VOCs) in blood. However, no health or risk-based screening values are available to evaluate these data from a health safety perspective or to use in prioritizing among chemicals for possible risk management actions. We gathered existing risk assessment-based chronic exposure reference values such as reference doses (RfDs), reference concentrations (RfCs), tolerable daily intakes (TDIs), cancer slope factors, etc. and key pharmacokinetic model parameters for 47 VOCs. Using steady-state solutions to a generic physiologically-based pharmacokinetic (PBPK) model structure, we estimated chemical-specific steady-state venous blood concentrations across chemicals associated with unit oral and inhalation exposure rates and with chronic exposure at the identified exposure reference values. The geometric means of the slopes relating modeled steady-state blood concentrations to steady-state exposure to a unit oral dose or unit inhalation concentration among 38 compounds with available pharmacokinetic parameters were 12.0 microg/L per mg/kg-d (geometric standard deviation [GSD] of 3.2) and 3.2 microg/L per mg/m(3) (GSD=1.7), respectively. Chemical-specific blood concentration screening values based on non-cancer reference values for both oral and inhalation exposure range from 0.0005 to 100 microg/L; blood concentrations associated with cancer risk-specific doses at the 1E-05 risk level ranged from 5E-06 to 6E-02 microg/L. The distribution of modeled steady-state blood concentrations associated with unit exposure levels across VOCs may provide a basis for estimating blood concentration screening values for VOCs that lack chemical-specific pharmacokinetic data. The screening blood concentrations presented here provide a tool for risk assessment-based evaluation of population biomonitoring data for VOCs and are most appropriately applied to central tendency estimates for such datasets.

The future of toxicity testing

In 2007, the U.S. National Research Council (NRC) released a report, "Toxicity Testing in the 21st Century: A Vision and a Strategy," that proposes a paradigm shift for toxicity testing of environmental agents. The vision is based on the notion that exposure to environmental agents leads to adverse health outcomes through the perturbation of toxicity pathways that are operative in humans. Implementation of the NRC vision will involve a fundamental change in the assessment of toxicity of environmental agents, moving away from adverse health outcomes observed in experimental animals to the identification of critical perturbations of toxicity pathways. Pathway perturbations will be identified using in vitro assays and quantified for dose response using methods in computational toxicology and other recent scientific advances in basic biology. Implementation of the NRC vision will require a major research effort, not unlike that required to successfully map the human genome, extending over 10 to 20 years, involving the broad scientific community to map important toxicity pathways operative in humans. This article provides an overview of the scientific tools and technologies that will form the core of the NRC vision for toxicity testing. Of particular importance will be the development of rapidly performed in vitro screening assays using human cells and cell lines or human tissue surrogates to efficiently identify environmental agents producing critical pathway perturbations. In addition to the overview of the NRC vision, this study documents the reaction by a number of stakeholder groups since 2007, including the scientific, risk assessment, regulatory, and animal welfare communities.

A stochastic whole-body physiologically based pharmacokinetic model to assess the impact of inter-individual variability on tissue dosimetry over the human lifespan

Physiologically based pharmacokinetic (PBPK) models have proven to be successful in integrating and evaluating the influence of age- or gender-dependent changes with respect to the pharmacokinetics of xenobiotics throughout entire lifetimes. Nevertheless, for an effective application of toxicokinetic modelling to chemical risk assessment, a PBPK model has to be detailed enough to include all the multiple tissues that could be targeted by the various xenobiotics present in the environment. For this reason, we developed a PBPK model based on a detailed compartmentalization of the human body and parameterized with new relationships describing the time evolution of physiological and anatomical parameters. To take into account the impact of human variability on the predicted toxicokinetics, we defined probability distributions for key parameters related to the xenobiotics absorption, distribution, metabolism and excretion. The model predictability was evaluated by a direct comparison between computational predictions and experimental data for the internal concentrations of two chemicals (1,3-butadiene and 2,3,7,8-tetrachlorodibenzo-p-dioxin). A good agreement between predictions and observed data was achieved for different scenarios of exposure (e.g., acute or chronic exposure and different populations). Our results support that the general stochastic PBPK model can be a valuable computational support in the area of chemical risk analysis.

Application of toxicokinetics to improve chemical risk assessment: implications for the use of animals

While toxicokinetics has become an integral part of pharmaceutical safety assessment over the last two decades, its use in the chemical industry is relatively new. However, it is recognised as a potentially important tool in human health risk assessment and recent initiatives have advocated greater application of toxicokinetics as part of an improved assessment strategy for crop protection chemicals that could offer greater efficiency, use fewer animals and provide better data for risk assessment purposes. To explore the potential scientific and animal welfare benefits of increased use of toxicokinetic data across the chemical industry, an international workshop was held in 2008. Experts from a wide range of chemical industry sectors, including industrial chemicals, agrochemicals and consumer products, participated in the meeting as well as representatives from relevant regulatory authorities. Pharmaceutical industry experts were also invited, in order to share experiences from the extensive use of toxicokinetics in drug development. Given that increased generation of toxicokinetic data could potentially result in an increased number of animals undergoing testing, technologies and strategies to reduce and refine animal use for this purpose were also considered. This paper outlines and expands upon the key themes that emerged from the workshop.